EPC3925 mit USB Festplatte verbinden / How to connect an USB HDD to an EPC3925

Moin!
Ich habe hier ein EPC3925 Kabelmodem stehen und möchte gerne eine USB Festplatte daran anschließen. Wie wird das gemacht?
HI!
I have an EPC3925 cablemodem and want to connect an USB HDD. How I have to do this?

Is this external USB HDD formatted in NTFS? It would have to be either FAT32, or preferably HFS+, to be usable from the Time Capsule (TC) as a shareable AirPort Disk. If it is already in FAT32 or HFS+, you may need to use a powered USB hub for it to be recognized as the USB port on the TC provides limited power to connected devices.

Similar Messages

  • How to connect my Iridium 9555 to a USB connector on the Mac OS 10.7.3?

    How to connect my Iridium 9555 to a USB connector on the Mac OS 10.7.3?
    i can not create a new network configuration via USB interface on 10.7.3.

    Doesn't look like they've updated their driver in a while.  October 15 - 2010.
    Typically old drivers and 10.7 don't get along so well.  Short answer, unless you know how to write a driver, you might be outa luck. 
    Call their support line and see what they say.
    -G

  • How to connect my iphone 4s to a USB sound card for 5.1 speakers?

    How to connect my iphone 4s to a USB sound card for 5.1 speakers?

    You can't:
    1. iPhone sound output is stereo, not Dolby 5.1 compatible.
    2. iPhones do not connect sound output by standard USB.  The connecting device has to be iPhone compatible.

  • My ipad 3 is frozen on the plug into itunes page. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (there is no usb port on an ipad). If anyone could help it would be appreciated.

    My ipad 3 is frozen on the plug into itunes page - it won't turn off or on - just stuck. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (the advice is to connect ipad to mac and there is no usb port on an ipad). If anyone could help it would be appreciated. Going nuts.

    I think you should probably also read the iPad User Guide. You didn't say what version of iOS your iPad is running, so here's the links to both the iOS 6 and iOS 7 (PDF) versions:
    iPad User Guide for iOS 6
    iPad User Guide for iOS 7

  • How to connect an external monitor to macbook pro. The monitor has no usb connector without a usb

    How to connect an external monitor to macbook pro. The monitor has no usb connecter, only a port.

    Most MacBook Pro models have a Mini DVI port, a Mini DisplayPort or a ThunderBolt port for connecting an external display. USB does not have enough bandwidth to support a responsive display connection.
    What model MacBook Pro do you have, by year, CPU speed or MacBook Pro 3.1 designation?

  • I am connecting an external USB HDD and I can see it on my Apple Macbook Air. BUT this drive is READ only. How can I write to it?

    I am connecting an external USB HDD and I can see it on my Apple Macbook Air. BUT this drive is READ only. How can I write to it?

    Drive Partition and Format
    1.Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

  • How to connect Trigger USB-6009 on a flowmeter

    I have a flowmeter with the data:
    sensing principle: hall-effect, non contacting
    output square wave: NPN o.c.
    Voltage supply: 4,5-24 VDC
    output current: 13mA max
    more you can find in the attachement and i use the USB-6009.
    How i have to connect the flowmeter to the trigger (PFI0)?
    Thanks in advance for any help!
    E.Stein
    Attachments:
    flowmeter.pdf ‏17 KB

    Thanks for
    Info!
    I work with
    LabVIEW 8.6 and the configure and programming 
    of
    falling-edge
    events is not the problem.
    The Problem
    is the connection. How to connect the flowmeter to the
    USB-6009? Because the 6009 have no gate and out.

  • How to connect serial or usb or parallel port

    telll me how to connect our application with serial port and how to detect weather the usb is connected or not

    Without spending too much time looking at the documentation, from using previous similar transducers, the primary two connections you are concerned with are the "+output" and the "ground". The other connections are also important, but aren't directly the concern of the Data Acquisition Hardware. The "+output" produces a variable dc voltage relative to the "ground" input that is a product of the applied pressure, with the maximum output voltage, as shown on the chart, indicating maximum pressure. So you would connect those, through a suitably shielded, moderately short length, wire to the "DAQ" analog input. You will also have to supply the transducer with it's required + supply voltage at pin 2 "vs", and the power supplie's negative to the ground. There are whitepapers on this NI site about connecting to data acquistion hardware and I strongly suggest reading them a couple of times as well as anything online you can find. Writing the DAQ software, in LabVIEW or whatever, can be trivial compared to making the correct, low noise, connections to sensor hardware.
    I didn't read how the offset adjustment signal is produced or its use, figure it is designed to allow you to "tune out" some signal offset caused by differences between sensors of a type (they will not all have the same "fullscale output" as indicated in the chart).
    As you proceed, please keep asking.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • I used the article "How to connect Sony Tablet with adb protocol through USB?" Article ID:474705. E

    I used the article "How to connect Sony Tablet with adb protocol through USB?" Article ID:474705.
    Everytime I restart the computer now I get a open with window.
    When I select Notepad and open it I get
    0x54c  Noswal\.android\adb_usb.******
    How do i undo that.
    If it helps the Article ID:474705 this says at one point
    3. Open a shell prompt and enter the following command: echo "0x54c" >> $HOME/.android/adb_usb.******.
    I gues that's what's creating the problem.
    Please help.

    Hi elishacuthbert.
    Try disabling the start-up items in your computer to troubleshoot the issue. Follow the steps mentioned below:
    Right click on the Taskbar > Task Manager > Start-up > Select the applications > Disable.
    Note: If my post answers your question, please mark it as an "Accepted Solution."

  • How to connect a USB-6008 with lookout6.0?

    hi >>>
    I am a student in electrical and computer department, i want to ask about
    How to connect a USB-6008 with lookout6.0 if thats possible?Could you
    provide some help?
    Regards
    Manal

    Hi Manal there is a way to do this, DAQ or DAQmx drivers have an OPC server, you can find the detailed information in the next link
    http://digital.ni.com/public.nsf/websearch/13BBC10CCC1FECBA8625720B00823140?OpenDocument
    Best Regards
    Benjamin C
    Senior Systems Engineer // CLA // CLED // CTD

  • How to connect to itunes with usb to lappy

    hii how to connect to itunes using usb n start m iphone?

    Post in your native language... the above makes no sense.

  • TS1986 how to connect usb optical mouse with scroll to mac

    hey its manish hea
    please can i get to know how to connect usb optical mouse with scroll so tat it can be used for AUTOCAD 2011
    i connected the mouse but its not working
    please suggest

    Welcome to the Forum!
    Well, there is no big deal about USB mouse, it's plug and play.If your mouse doesn't work at all, then its broken, or it's not compatible with mac. Test it in a PC.

  • How to connect a Sony Bravia TV to the internet through your Airport network

    Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
    My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
    Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
    The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.

    I have now had a detailed reply from Sony Europe and the way to do this is to:
    1.       Press Home on the TV Setup
    2.       Use the right and left arrow to select Setting.
    3.       Use the up and down to select Network, press Enter.
    4.       Select Network Setup.
    5.       Select Wireless setup.
    6.       Select Scan
    7.       Select your network
    8.       A new screen will appear asking for entering the security key.
    9.       Enter your WPA2 key.
    10.   Select Enter.
    11.   It will take you back to the same screen asking for entering the
    security key.
    12.   Press the right arrow.
    13.   Select Auto.
    14.   Press the right arrow.
    15.   Select Save and connect.
    These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem.

  • How to connect my iPad, Brother printer, and AirPort Extreme?

    How to connect my iPad, Brother printer, and AirPort Extreme?

    I don't believe any of the Brother printers are AirPrint-enabled. Is your Brother printer network-ready? That is, does is support either/both a wired or wireless connection or just uses USB to connect?

  • How to connect my iPad to wireless dest 3511e all in one HP printer

    How to connect my wireless printer to my iPad HP dest jet 3511e all in one SN [Personal Information Removed]

    Hi Alicerief,
    Welcome to the HP Support Forums. I understand that you would like to know how to print from your iPad to your Deskjet 3511 printer.
    Your printer is AirPrint and ePrint capable so you should be able to use either method to print once your printer is connected to your wireless network. The instructions on connecting your printer to your wireless network can be found in your user guide. You can designate it as a wireless printer during the setup as detailed in the section "Traditional wireless connection" on page 32.  If you have already installed your printer onto your computer using a USB connection, the instructions to switch to a wireless connection can also be found on page 32 in the section titled "Change from a USB connection to a wireless network". 
    I have included several reference documents for you. The first one reviews printing from an Apple mobile device to your printer. I have also included the document on how to setup ePrint and customize the printer's ePrint email address. There are two mobile apps available from HP that will allow you to send print jobs to your printer, the HP ePrint mobile app and the HP All-in-One Printer Remote app. The AiO app will also allow you to scan from your printer to your iPad. I have included the FAQ documents for both apps.
    HP Deskjet 3510 e-All-in-One Series User Guide
    http://h10032.www1.hp.com/ctg/Manual/c03471705.pdf
    Printing from an Apple Mobile Device
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02796271
    Setting Up a Custom Email Address for ePrint
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02940150
    HP ePrint Mobile App FAQs
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01923321
    HP All-in-One Printer Remote Mobile App FAQs
    https://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03561640
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

Maybe you are looking for

  • Zooming an image and scrolling it using a JScrollPane

    Hi all, I know this is one of the most common problems in this forum but i cant get any of the replys to work in my code. The problem: I create an image with varying pixel colors depending on the value obtained from an AbstractTableModel and display

  • How to deal with empty tags in a SAX Parser

    Hi, I hope someone can help me with the problem I am having! Basically, I have written an xml-editor application. When an XML file is selected, I parse the file with a SAX parser and save the start and end locations of all the tags and character data

  • Status of quotation with order

    Hi, i created an order with respective to quotation.. In document flow that status of quotation is showing being processed where as order is showing open.. what would be the reason?

  • DB2 migration v8.1 to v9.5 in SAP 6.40

    Hello Sirs, I'm planning the migration of the databases of v8.1 to v9.5 in SAP 6.40. I have a few questions regarding this issue... if anyone knows please tell me. 1. Is there any inconvenience of having DEV system under DB2 9.5 and the other systems

  • How can I save information (game variables) onto a computer? (cookies?)

    I have a "death match" game that I have hosted on freewebs.com (that is working perfectly). I want the game to store information on the computer that visits my site, including player experience and money so they can close out of their browser and the