Epson AL CX16NF scanner install problem

I have tried install latest Epson CX16NF scanner drivers many time, but scanner utility not showing in utilities or image capture.
Whata I should do?
http://www.epson.co.uk/gb/en/viewcon/corporatesite/products/mainunits/support/38 54
Printing works fine.

I have contacted Epson and for now it's useless as the driver they give me is for Snowleopard
Now I have done another test.
Deinstalled all my printers, and reinstalled. but without success.
By the way, meanwhile I am experimenting another issue, is that I can print only once when I install the driver and then I am not able

Similar Messages

"Scanner not installed" problem

I'm using a G-5, running 10.4.11 I use an Epson Expression 1600 scanner in Photoshop (CS3). The last time I used it, as the image finished scanning and appeared on the screen, the computer crashed. (Kernal panic). Since then, I've been unable to use the scanner. In Photoshop, File>Import>Epson Expression 1600, the Epson software launches, but I'm then told there is no scanner installed. I've downloaded and reinstalled the Epson scanner driver, installed a new USB hub, (and also plugged the USB scanner cable directly into the Mac), unplugged and plugged in the scanner. No luck. System Profile shows the scanner (or maybe it's just the driver it's detecting.)
I don't know if the problem is in the scanner, Photoshop, or Tiger. Any suggestions would be much appreciated. If I can't solve it soon, I'm going to need to buy a new scanner.

USB and FireWire Quick Assist
http://support.apple.com/kb/HT1151?viewlocale=en_US
Common fixes for USB device issues (unrecognized, etc.)
http://www.macfixit.com/article.php?story=20070824012114701
Try booting in Safe Mode? See
What is Safe Boot, Safe Mode? (Mac OS X)
http://docs.info.apple.com/article.html?artnum=107392
Takes a while to run, but it usually "fixes" problems.
 Cheers, Tom

Scanner driver for Epson AL CX16NF

Hello,
I have a multi function printer Epson AL CX16NF.
I found the driver for the printer but not for the fax and scanner options.
I am using it on my network (wired or wireless).
It works fine under my windows systems.
I use Lion 10.7.1.
Any suggestion?
Cheers

I have contacted Epson and for now it's useless as the driver they give me is for Snowleopard
Now I have done another test.
Deinstalled all my printers, and reinstalled. but without success.
By the way, meanwhile I am experimenting another issue, is that I can print only once when I install the driver and then I am not able

Problem with Epson Photo 3170 Scanner

Hi,
I bought a new Apple and installed Mac OS X 10.6.8 and my epson photo 3170 scanner is not working.
I read here that my scanner is supported -> http://support.apple.com/kb/HT3669#epson
I did Software update and downloaded the latest version, but still doesnt work.
I also installed Roseta, but i cant find the option in Photoshop (using control+i) it only gives me option for 32bit mode.
any ideas?
thanks ;-)

This is the latest update, not supporting 10.6.x, so i turned to apple, but didn't work either.
TWAIN Driver and EPSON Scan Utility v2.77A
Intel-based Macs with OS X (v10.5 - 10.5.x) compatible,
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=25021&prodoid=35836 301&BV_UseBVCookie=yes&infoType=Downloads&platform=Macintosh&x=22&y=13

EPSON DX6000 , INSTALL PROBLEM

Hi , I'm trying to install an Epson DX6000 on my iBook G3 OS 10.4.1 and it wont finish the install.
It runs right through installing up to about 99% and hangs on last 12 files.
I have successfully installed an Epson CX5200 & RX600 without any problems and my computer behaves great in all other apps.
Its driving me nuts so any answers will be really appreciated and help get the blood pressure down.
Thanks in advance

Try a reset of the printing system. This often resolves the symptom you are experiencing.

HT1338 Problems with Epson Perfection 1260 Scanner following latest update

I am having problems with my Epson Perfection 1260 Scanner since the latest update from Apple.

Not sure this will help, but sometimes resetting the printing system helps. All your printers will be deleted and need to be addeda again:
http://support.apple.com/kb/HT1341

Installing an EPSON 1680 Pro scanner

I have a MacBook Pro and have the opportunity to get an EPSON 1680 Pro Scanner.
Can I use this scanner on this machine?
Are there drivers I can download as the original software for the scanner are missing.
Thak you.

Try resetting the printing system.
Reset Printing System

Pse10 will not recognise Epson V750 Pro scanner in Mac 10.7.2

Hi all
I'm having trouble getting my Pse10 Organiser to recognise my Epson V750 Pro scanner with Mac 10.7.2 . In <get pctures from > it goes straight from
< cameras or card readers > to < files or folders > with no scanner option in between.
I have tried installing Twain plugin in every concievable location but the message is always the same < Photoshop does not recognise this type of file > . On opening Pse10 it flashes during initialising < building Twain menu items. Epson V750 Pro > so it must almost be correctly installed. In the hard drive the Twain plugin is described as <alias >.
I have tried : applications/Pse10/support files/optional plugins/import modules/ = Twain . &: support files/plugins/import modules/ = Twain and Anti-Ali...T.plugin . The scanner works perfectly as a copier on the Mac when not in Photoshop so the driver is OK and up to date . The problem is between Mac & Photoshop, this is a purchased DVD installation which I have uninstalled-re-installed several times. The technicians at Adobe suggested trying downloading Trial Pse10 to check if my disc is off but on downloading the Trial it gets stuck every time in < extracting > after ten hous of which I give up .
Someone suggested that this may be a 32 bit / 64 bit problem, I just do not know.
Any ideas would be gratefully recieved.

There is no scanning into organizer on a mac, as explained before in your other thread. Installing the plug-in only enables scanning into editor (in windows, organizer scanning is via WIA only, and there's no WIA on a mac).
If you see alias, you did not move the plug-in, you made an alias for it. You must move the actual plug-in, not make an alias. Just drag it over without pressing any other keys.
This will not work unless your scanner already works with OS X scanning. When it's connected and you open Preview and go to File>Import from Scanner, do you see your scanner listed?

Acrobat 11 Epson GT-S50(ICA) Interface Problems with Yosemite

After updating the ICA scanning software for Yosemite 10.10.2 I was finally able to get Acrobat 11.0.10 to scan using my Epson GT-S50 scanner. However there is a strange problem with the user interface. When I select scan the following appears.
as you can see, all controls except "image correction" are missing from the right side. The only way to get them to reappear is to change "none" to "manual" image correction as shown in the next image.
Now, if I proceed with the interface as shown all sheets are scanned but the session will always be aborted after the last sheet.
I am able to get the process going but only if, after choosing "manual" to get the controls to refresh, I subsequently set "Image Correction" back to "none". This procedure must be repeated every time I use the ICA interface. It works but I can never use the Image Correction features. This last image is what the interface should look like from the get-go.
Again, if "Image Correction" is set to manual the scan is aborted at the end.

Try un-installing Sophos.
Sophos Un-install

Using PSE13 with Epson Perfection V600 Scanner

I own an Epson Perfection V600 scanner and have always preferred the TWAIN driver (see TWAIN not installed | Photoshop Elements 9 and later) over WIA. Since installing PSE13 64 Bit I no longer have Adobe's TWAIN driver.
I recommend using Epson's latest scan utility (last update 7/29/13), running it independently of PSE13, and importing into PSE13 later. The quality is much better than WIA.

Seems the problem was a conflict with another program I have. The Epson software installed after I resolved the problem. I do wish the Epson support people knew more about their software since they were no help at all.

Epson Perfection V600 Scanner

Has anyone had success getting this scanner to work with Lion? I can scan photos, but not slides or negatives. The software for Lion from the Epson site does not install anything.

Seems the problem was a conflict with another program I have. The Epson software installed after I resolved the problem. I do wish the Epson support people knew more about their software since they were no help at all.

Epson V500 Photo scanner wireless connection

I would like to make a wireless connection to my Epson V500 (Photo) scanner to my MacBook Pro running Mavericks. It is unclear if this is possible from the Epson side and on the MacBook Pro side the Scanner doesn't show up under Preferences>Sharing or Preferences>Printers & Scanners BUT I can scan from the laptop if connected by USB cable.
Questions:
A. Can the Epson V500 (Photo) be accessed wirelessly?
B. If yes to above, how do I set this up on the MacBook?
Thank you

mdsalemi wrote:
Hello,
I have a MacPro 1,1 running Lion 10.7.2. Everything seems to be up to date via software update. I have an Epson V500 Photo scanner (USB), and the system recognizes that...
I ran into a similar problem (loss of functionality) with an Epson 7600. I traced my problem to letting software update substitute its Epson drivers for what Epson had originally provided for the printer. It got worse when installing Lion. Fortunately, I expected that problem so I applied the updates to clones of the working installation, using both more recent Epson software for their long-abandoned printer and what came down with software update. Testing the clones showed me that "if it ain't broke, don't fix it" so I stayed with the old installation, updating only the system software to 10.6.8.
You may face a further issue in that the working Epson software may have been at least partially written in code meant to run on a PPC Mac, not Intel, and Apple removed all support for that when moving from 10.6 to 10.7. That may be why Epson shows printer driver support only through 10.6 on its website.
One of the beauties of the Mac Pro is that you can have multiple HD drives with multiple partitions so there's plenty of room to do tests like that. But it really shouldn't be necessary...

Just upgraded to Mavericks. How do I get my Epson Workforce 360 scanner to work again?

Just upgraded to Mavericks. How do I get my Epson Workforce 360 scanner to work again?

Try Image Capture, which comes with your Mac. It should be in the Applications folder, or if not, try the Applications/Utilities folder. It should automatically find the right Epson driver for your scanner.
Also, I'm guessing you have Epson 630 rather than 360. If so, see this from Epson Website.
The latest printer and scanner drivers for this product are available from Apple's Software Update. Here's how to get them:
Do one of the following:
USB
Connect your product to your Mac using a USB cable and make sure the product is turned on.
Wireless
Connect your product to your router wirelessly and make sure the product is turned on.
Note: You'll need to use the product's control panel to establish the connection to your router.
Ethernet
Connect your product to your Mac using an Ethernet cable and make sure the product is turned on.
Select the menu on your Mac, then Software Update.
Do one of the following:
If you see an update from Epson, select UPDATE to install it.
Note: Apple Software Update may find multiple updates for your system. You may choose to install all or some of the updates.If an update is not available, you're done. You already have the latest drivers from Apple.
Note: You can also use EPSON Scan if it's available for your product. To get it, go to the Epson main support page, select your product, then select Drivers & Downloads. Select Drivers, then Scanner Driver and EPSON Scan Utility.
For more information on scanning in OS X, see our Image Capture FAQ.

EPSON Workforce 310 "scanner reported an error" when using document feeder

I'm having trouble using my EPSON Workforce 310 printer/scanner with my new MacBook Pro (late 2012, 2.5 GHz i5, OS X Mountain Lion 10.8.2).
Using the flatbed I can scan without a problem. But when I try to use the document feeder, I get the following error right after I click Scan and before the scanner has done anything (at least I don't hear anything moving inside the EPSON):
Scanner reported an error
An error occured during scanning
The EPSON's display doesn't show any error or special message.
This is repeated whether I use Image Capture, Preview's Import from Scanner, or the printer's native app (PrinterProxy, the one that shows up in the doc whenever the printer is printing or scanning).
I have no problem doing the scanning from my old iMac (2006, 2GHz Core Duo, Snow Leopard). After scanning to the MacBook fails I can walk over to the iMac and scan from there without problem and without resetting anything on the EPSON.
The EPSON is connected the home network via ethernet to a Time Capsule. Both computers are connected to the network via WiFi.

Syd,
My wife's iMac with 10.6.6 stopped working with her Epson 2480 Photo scanner. Get the error message "SCANNER reported an error. An error has occurred during scanning" I am trying to use it from the Image Capture App or from the print/fax option in Settings which opens Image Capture. I ran the uninstall program and then reinstalled the ICA 13969 .dmg but get the same error. Not sure what else I can do.

Does the Epson Expression 1600 Scanner work in SL?

Does the Epson Expression 1600 Scanner work in Snow Leopard? Did you have to install Rosetta to get it to work?
I use my MacBook Pro for business and it is vital that everything I use works properly. From what I've seen on these posts, I may be waiting a long while to upgrade.

People who need to SCAN & PRINT without a compatible driver from their manufacturer can use Apple's very basic "PRINT & SCAN" utility in System Preferences:
Click the Apple menu ( ), and then click System Preferences .
Click Print & Scan ( ).
Click Scan , and then click Open Scanner .
Click Show Details . The details of the scan display, including options to modify scan settings such as output type.Figure 2: Example of the Show Details scanning screen
Change any settings as necessary, and then click Scan .
Hope this helps

Epson AL CX16NF scanner install problem

Similar Messages

Maybe you are looking for