Epson perfection 610 does not work as claimed with Mavericks. The driver has not been working since it was introduced in previous OSX releases. Will Epson look into this matter as the images produced are unusable, the cymk channels are offset.

Has anyone had this scanner working with the Apple drivers? Mavericks still adds this scanner and even gives it the correct icon in the dock. But, the CYMK channels are offset making the output images unusable. Surely this must be a driver fault which has been long standing, before Mavericks. I get the impression it is a generic driver that just maybe recognises an epson scanner and just does what it always does without taking too much care to adapt to the scanner itself. Such as shame as the Apple scanning software is otherwise very good.

Anyone know how to inform Apple they have a problem with the driver? Just to let them know...
Of course there is handmade solution by using Photoshop and move channels each other but frankly...
Here are sample scans which demonstrates the problem, one on mac through Image Capture:
… and just to compare, the sample I did in Paint (virtual Windows machine under OSX):

Similar Messages

  • I am using Firefox 4.0 Beta 10. It doesn't start immediately after I click on the Firefox button located in my shortcut bar. And sometimes it even doesn't open. I don't know why it occurs, so please look into this matter. Thanks!

    Whenever I click on the button of Firefox 4.0 Beta 10 located in my shortcut bar. It opens after a very long time i.e. after 5-10 minutes after I get irritated and start using Safari. And sometimes it doesn't even open. Please look into this matter. :D
    Thanks

    Try disabling hardware acceleration in your Firefox settings and see if it helps:
    From the Firefox menu, go to '''Options''' and click the '''Advanced''' panel, then select the General tab. Clear the box in front of "Use hardware acceleration when available" so that it is unchecked, then restart Firefox. ([http://support.mozilla.com/media/uploads/gallery/images/2011-01-27-04-52-31-8c9d82.png screenshot]).
    Ref: <br>
    https://blog.mozilla.com/tglek/2010/12/21/rude-surprise-startup-overhead-of-windows-font-apis/

  • I cannot connect my external hard drives (1 WD My Passport and 1 LaCie Porsche Design). The drives were connected and worked perfect, the WD is used as a Time Capsule, the LaCie is formatted as exFAT and used for miscellaneous. They are both USB 3.0

    I cannot connect my external hard drives any longer. I have one WD "My Passport" used as a Time Capsule and one LaCie Porsche Design used for all different kind of data, formatted in exFAT. They worked fine, connected direct or through an additional USB hub or also attached to a Dell monitor. The Lacie helds my iTunes Library and the iPhoto library.
    After I moved the iTunes library to the external drive, from time to time the drive went into a never ending loop and I had to shut down the laptop (MacBook Air).
    The last time starting again the drives were not recognized any longer. I tried to connect them to another MacBook, which didn't work.
    Starting with Windows 7, the WD is also not recognized at all (perhaps because of time capsule format?) and the LaCie gives an error.
    Could anybody tell me if there is a chance to get them alive again? When I connect them now, they start to heat up quite fast without anything else happening.
    Thanks

    Hi,
    Just want to clarify, have you checked to make sure the cords are not damaged  (going from hard drive to computer and or any power source )?
    You have also check to make sure that usb ports are working correctly?
    If you have checked these things it may be that the external drives have failed.
    I would google the error message from the LaCie drive before I do anything.
    There are several ways that I know of,  one is to put the hard drive in the freezer for a while (make sure you wrap it air tight) if this works it is not a permenint fix. You might be able to transfer information to another source.
    The other method is to plug the hard drive into a hard drive connector a product like this:
    http://www.newegg.com/Product/Product.aspx?Item=N82E16817707192
    to do this you would have to remove the hard drive from its enclosure and still this is not a guarantee it will work.
    The finally way I know is using a recovery service. This can be rather expensive, and  there are no guarantees

  • IPhone 4s upgraded to iOS7 and I´m able to enter a new caldav calendar but I can´t find the calendar anywhere and the schedules are not in the calendar. The caldav server have been working on the iOS 6.1.3 efore very well! Any suggestions?

    Hello,
    I tried to enter a caldav calendar to my iPhone 4s.
    The same server and the same calendar have been working well tihin iOS 6.1.7.
    But now on iOS 7 the caldav server and account is confirmed but don´t appear in the calendar so the schedules are also not shown in the calendar app.
    Can anyone confirm that or has some suggestions?
    Thanks!
    Chris

    Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
    Anything else I could try, or am I doomed!
    All of your help is much appreciated, thanks

  • HT1379 The USB ports on my 30" Cinema are not working.  The monitor has not been used for a year or so, and the computer is a Mac Book Pro, 1012 model running OS Mavericks.  I need to move the computer between two locations, and the other monitor is a 27"

    The USB ports on my 30" Cinema HD display appear to not work.  The monitor has not been used for almost a year, when I upgraded to a new Mac Book Pro and the 27" retina display.  Now I need to move the computer back and forth between two locations using the two displays.  The need for operating USB ports is essential.  Any ideas.  The display appears entirely normal.  Am running OS X 10.9.

    Disregard, problem solved.

  • Hi, I Would like to know what I need to do to make work iWork"09 with my portable which has mac OS Lion 10.7.5 ; it does non open it because it says I need to do some updates but how can I do it if it does not open it ?

    Hi,
    I Would like to know what I need to do to make work iWork"09 with my portable which has mac OS Lion 10.7.5 ; it does non open it because it says I need to do some updates but how can I do it if it does not open it ?
    Thank You

    WILL ANYONE ANSWER MY QUESTION?  WHAT DO I HAVE TO DO TO GET A REPLY FOR MY CONUNDRUM/

  • Can not take a screenshot with Maverick and track pad.  can not use apple chat to talk with a tech.  there are other issues also like I used to be able to go back a page with the delete button.  No Maverick PDF to instruct on how to use Maverick

    Can not take a screenshot with Maverick and track pad.  can not use apple chat to talk with a tech.  there are other issues also like I used to be able to go back a page with the delete button.  No Maverick PDF to instruct on how to use Maverick
    THE use of the apple support is a mess also.
    I want to be able to use my MAC fully and easily like I used to with Snow Leopard. 
    What is wrong with this maverick OS?

    The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
    You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

  • So, I dropped my phone today on the cement, it works...with minor annoying glitches, has nasty bluish vertical lines and the picture is a tad distorted as well. :/ Does this mean I need to spend tons of money to get this fixed? Ahhhh! Help!

    So, I dropped my phone today on the cement, it works...with minor annoying glitches, has nasty bluish vertical lines and the picture is a tad distorted as well. :/ Does this mean I need to spend tons of money to get this fixed? Ahhhh! Help!

    Hi Rahhh829, 
    Welcome to the Apple Support Communities!
    It sounds like you may want to get your iPhone evaluated for repair. Please review the following web link for information on the iPhone repair pricing and process. 
    iPhone Repair and Service - Apple Support
    Regards, 
    Joe

  • IMac (Intel) Restore DVDs don't work if the drive has been formatted first

    Here's an interesting find...
    we have a gob of iMac G5s that were being re-imaged and one iMac Intel was mistakenly re-imaged with a G5 dmg (via Firewire Target Disk Mode).
    As expected, the iMac Intel wouldn't boot from a 10.4.4 image built on a G5, but now when I try to restore the Intel back to the out-of-the-box state (booting from its OS dvds), the installer reports "You cannot install Mac OS X on this volume. Mac OS X cannot start up from this volume." The Options button is greyed-out (where normally you could select Options and choose Erase and Install).
    Further inspection on another out-of-the-box Intel iMac (in Firewire Target Disk Mode) shows its hard drive is actually partitioned into two volumes: One is a 200MB partition, the other is the remainder and mounts as Macintosh HD. The 200 MB partition will not mount (via Disk Utility).
    I'm assuming that since the Intel iMac's drive was erased prior to booting from it's OS DVDs, the necessary partitions are not present.
    Anyone have any info? I'm guessing that since I did not initiate the restore from the DVD's "Install Mac OS X and Applications" script the drive did not get partitioned correctly...
    TIA -m.

    Yeah, I found that out. Here's one link that describes the issue:
    http://db.tidbits.com/getbits.acgi?tbart=08405
    My point was to illustrate the OS Installer/Disk Utility’s inability (while booted from the OS DVD) to provide the option to choose the GUID partitioning scheme for a volume during an “erase and install” on a drive that has been previously formatted under the “traditional” partition scheme – the “options” button does not appear.
    To reinstall to factory defaults, I had to boot the target iMac into Firewire disk mode and use another iMac (Intel) and its Disk Util to get the “options” button to select the GUID partition scheme.
    Oh well, I’m sure Apple’s working on that…
    -m.

  • Firewire not detected by FCP with OS-X 10.4.10 (Tiger), worked fine w 10.3.

    Hi all, hope some one can help, I just upgraded to Tiger OS (OX-X 10.4.10) from latest updated OS, now FCP dos not find the 720 x 480 Firewire Device for external video, I use an ADVC 110 converter that was working very well to "Print Video to Tape" on a betaca SP VTR, i readed most of the support pages, did the erase FC preferences on user folder, reinstalled FCP 4.5 (That is my FCP Version), also downloaded and installed the FCP 4.5 Update from the FCP Update Webpage, Also erased the complete FCP an all referenced files on my hard disk and reinstalled FCP, last i did was connect my Sony DSR 300 Camera and still FCP can't find it, It's only not detected on FCP, the computer DOES recognize both (ADVC and Camera) on the Firewire connection at System Proffiler, do you think that an OSX Clean Install would fix this ?

    Before you updated to 10.4.10 did you do a search of these forum pages to discover what you were doing was going to be wrong? Evidently not. There are literally dozens of messages like yours warning of what would happen.
    FCP 4.5 was optimized for OSX 10.3. Some people have been able to run it on OSX 10.4. But it's not designed to run with that.
    Did you also update your Quicktime to 7.2? If so that will break many things. You must go back to Quicktime 6 with updates.

  • Somehow my entire itunes library got deleted ... I have the old ipod nano, which does not connect with iCloud so it has all been saved there, BUT .. I cannot load all my music that I put on and I no longer have the cd's PLEASE HELP!!!!

    PLEASE HELP!!!  Somehow my entire iTunes library got deleted, and I cannot sync all my music that I put on from cd's (which I no longer have). All the purchased music has been synced, but nothing else! All my other devices are synced with iCloud and lost the material as well ... I am so frustrated, because the nano has not been working properly, and I am afraid of losing it forever, and of course the cd's I backed everything with are MIA!!!! GRRR! Please HELP!!!
    Thank you so much!

    I can't tell from your post what you have and what you don't have. Are you saying the files are no longer on your computer, no longer on your iPod, or both?

  • I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks.  I am unable to find where and how to do this without losing the project I have been working on.  Please help?

    I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks.  I am unable to find where and how to do this without losing the project I have been working on.  Please help?

    Vere Clarke
    Premiere Elements 9.0/9.0.1 and Premiere Elements 13 are standalone products.
    So, you can have both on the same computer, but only open one for your work.
    The classical recommendation is to finish a project in the version in which it was created since there
    is no guarantee that a project from an earlier version will open in the later version. Probably will, but
    no guarantees. And, when you do explore this, do it from a copy of the earlier version project. Once you
    take the earlier version project into a later version one, you cannot go back to edit the later version edited
    project in the earlier version program.
    If you have both versions (9 and 13) on the same computer and you have not moved, deleted, renamed any of the version 9's files/folders,
    right click the saved closed Premiere Elements 9.0/9.0.1 project file, select Open With, and then Adobe Premiere Elements 13.
    (Your 9.0/9.0.1 saved closed project file should be found in Libraries/Documents/Adobe/Premiere Elements/9.0.)
    Please review and consider. If any questions or need clarification, please do not hesitate to let me know.
    Thank you.
    ATR

  • SqlTransaction.Rollback() does not throw InvalidOperationException in case the transaction has already been rolled back.

    According to
    MSDN SqlTransaction.Rollback() method must throw InvalidOperationException in case the transaction has already been committed or rolled back. 
    However, in my tests I don't get any exceptions. Here is the code:
    CREATE PROCEDURE dbo.USP_TEST_TX_PROC
    AS
    BEGIN
    SELECT 1/0;
    ROLLBACK TRANSACTION;
    END
    GO
    using(SqlConnection con = new SqlConnection(@"Data Source=XXX;Initial Catalog=TestDB;Integrated Security=True"))
    con.Open();
    SqlTransaction tr = con.BeginTransaction();
    SqlCommand cmd = new SqlCommand("dbo.USP_TEST_TX_PROC", con, tr) { CommandType = CommandType.StoredProcedure};
    try
    cmd.ExecuteNonQuery();
    tr.Commit();
    catch (Exception ex)
    try
    tr.Rollback();
    catch (Exception ex2)
    Console.WriteLine(" Message: {0}", ex2.Message);
    What am I doing wrong?
    Thank you.
    Alexey

    Hello Alexey,
    I created a client side demo which could throw the InvalidOperationException:
    using (SqlConnection connection = new SqlConnection(@"Server=(localdb)\Projects;Database=DFDB;Trusted_Connection=True;"))
    connection.Open();
    SqlCommand command = connection.CreateCommand();
    SqlTransaction transaction;
    transaction = connection.BeginTransaction("SampleTransaction");
    command.Connection = connection;
    command.Transaction = transaction;
    try
    command.CommandText = "ProInsertIntoOrder 1,'1'";
    command.ExecuteNonQuery();
    transaction.Rollback();
    throw new Exception();
    catch (Exception ex)
    // Attempt to roll back the transaction.
    try
    transaction.Rollback();
    catch (InvalidOperationException ex2)
    Console.WriteLine("Rollback Exception Type: {0}", ex2.GetType());
    Console.WriteLine(" Message: {0}", ex2.Message);
    You could have a try. However, it is not clear why it could detect the ROLLBACK statement on the server side, I suggest that you could post this feedback to:
    https://connect.microsoft.com/VisualStudio/feedback/LoadSubmitFeedbackForm
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • My iPhone 4s was stolen almost a week ago now.  If I can still see the phone listed in Find My iPhone but appears to be turned off does this mean the theif has not restored it to factory settings???

    My iPhone 4s was stolen almost a week ago now.  If I can still see the phone listed in Find My iPhone but appears to be turned off does this mean the theif has not restored it to factory settings???

    Are you sure?  I have other devices at home.  The only way I can make them disappear on the tracking list is by turning off location or resetting to factory settings. 
    I just want to make sure I'm not tracking a phantom that I will never recover :-(

  • I upgraded the Pages version on my iPad and iPhone some weeks ago. The App has not synced previous data on both AND it's unstable on both. Luckily I didn't upgrade on my Mac where the old version is working ok! What to do??

    I upgraded the Pages version on my iPad and iPhone some weeks ago. The App has not synced previous data on both AND it's unstable on both. Luckily I didn't upgrade on my Mac where the old version is working ok!

    You need the new versions of both to sync data between them. If you don't have the new versions on your Mac, they will not sync.
    BTW, the new versions do NOT overwrite the old on Mac. When you install them, the old versions are retained.

Maybe you are looking for

  • How to set the cardinality property as 1..n for a dynamically created node

    Hi...everybody     I am creating Dropdown by index UI element and the context atrributes dynamically.To bind multiple data to a dropdown the cardinality property of the node should be 0..n or 1..n, But i could not set the property of the dynamically

  • Dynamic Update Query

    HI All, Please find below DML script. CREATE TABLE UP_A(ID INT , VAL VARCHAR(50)) GO INSERT INTO UP_A VALUES(100,'Hundred') INSERT INTO UP_A VALUES(1001,'Hundred and one') INSERT INTO UP_A VALUES(1000,'Thousand') INSERT INTO UP_A VALUES(1005,'Thousan

  • CVS 1.11.21 and PVCS 6.8.10 compatible with solaris 5.10 Sparc ?

    Hi, Are CVS 1.11.21 and PVCS 6.8.10 compatible with solaris 5.10 Sparc Unix server. Thanks

  • Safari opens all thumbnails in Forums

    I read several forums and when there are thumbnail attachments, instead of showing the thumbnails it opens the full image instead creating confusing images. See this link as am example http://www.rcgroups.com/forums/showthread.php?t=851457

  • RFC 1939 delete problem

    sorry if this is the wrong post my problem is : i am writing mail server in POP (RFC1939) i found that every message after reading has to be deleted is that right? is it necessary to delete the message after reading the mail message ? hope for help t