Epson Photo RX600 no longer recognized by Image Capture but still prints

Recently my Epson Photo RX600 disappeared from Image Capture (in between doing an overview and final scan) and I can no longer seem to find/assign it. I am still able to print to the device through my Mac and to scan/copy using the buttons on the device, but no luck on scanning through the Mac. Any advice?
Thanks.

My name is Syd and I work for Epson America, Inc.
If nothing has been changed on the computer itself, you may want to re-install the ICA scanner driver and restart. If this does not work and the RX600 is connected directly to your Mac USB port, we would recommend contacting tech support to more quickly determine the issue as there are variables involved. The direct number is 562-276-4382.
Here to help,
Syd

Similar Messages

  • Canon MP560 no longer recognized by Image Capture/Preview

    I have a Canon MP560 wireless printer/scanner and for some reason the scanner can no longer be seen by either Image Capture, Preview, or the Canon mp560 scanner toolbox under the Print menu. This happened either after installing 10.6.5 or after installing the latest Canon Printer Driver updates (I am not sure which caused it, as I did both updates recently...)
    It can, however, be seen by MP Navigator 3.0.
    Anyone found a fix for this yet?
    thanks

    Okay, have done some testing and found some interesting things.
    With a new install of 10.6.5 (selecting not to add any printers) I was not able to locate any Canon AIO via wireless. The Default Add Printer pane was empty so it looks like the printer and scanner driver needs to be present on the Mac. For the printer this is understood, as the Canon protocol 'canonijnetwork' is not present in the BJPrinters folder located in Library > Printers > Canon (due to the customized installation the Canon folder was not even present). In checking the Image Capture folder (HD > Library) I also found that the Devices folder was missing. Inside of here you would normally find the Canon IJScanner package/s for a standard installation of 10.6. But with the customized install this package was not present and appears to influence the Mac's ability to 'see' the networked scanner component. To confirm this, I installed the Canon v2.4.1 driver update, which in turn created the Devices folder in Image Capture and consequently made the scanner component appear in the Default Add Printer view.
    Another observation was that prior to installing the Canon v2.4.1 update, Image Capture would still display the MP on the network, but under the Shared menu - not the Devices menu. So even without the ICA driver installed nor the MP scanner driver installed, I was still able to use Image Capture to scan a document from the wireless MP. The same was true for Preview in as far as the Networked Scanner selection showed all the MP's present on the wireless network.
    At this stage I believe that the Canon driver update you mentioned may have contributed to part, if not all, of your current symptom. The install.log does have a record of what this update installs. If you checked it there may be record of the installer not completing correctly. In any case I assume that for your Mac this update did not complete correctly and is causing the problem. So one suggestion would be to run the [Canon Driver v2.4.1 update|http://support.apple.com/kb/DL899] again (or for the first time if you simply used Software Update previously) to see if this repairs the CanonIJScanner packages.

  • I installed OS X Mavericks and now my Epson Scanner Perfection Series V330 Photo refuses to open. Is there a new driver available? I am scanning my work for a book publication and I need my scanner urgently. I tried Image capture but scanner is not detect

    I installed OS X Mavericks and now my Epson Scanner Perfection Series V330 Photo refuses to open. Is there a new driver available? I am scanning my work for a book publication and I need my scanner urgently. I tried Image capture but scanner is not detected.

    Looks like all Epson scanners will fail under Mvrx. And who knows when an updated driver will be available. It's not as if they have had a while to do it already.
    After I noticed mine wouldn't work, I deleted my Workforce 610 and re-added it by pressing the + and instead of going for the IP versions that may pop up, that they say to do under normal conditions, select the Bonjour version. When you select the new printer/scanner in the Printers & Scanners Control Panel, then open the control window and then look in the dock and see if your printer is there. Right click on it and go to "Keep in Dock" for easy Access. In the printer panel there should be a little picture of a scanner on the right side. Click on it or type Commmand-3 and the built-in scanner software/utility will come up. After playing with it I think it's better than and there are some cool features that are not in the stock Epson software.
    Hope this helps.

  • HT3669 My Epson Perfection 1200 scanner functions as a flatbed scanner but when I try to scan transparencies the control panels change in  Image Capture but the scanner bar will not complete the overview scan  & cannot travel beyond the first 2/3 centimet

    Epson Perfection 1200 scanner continues to function as a flatbed scanner but when I try to scan transparencies/film negs the control panels change in  Image Capture but the scanner bar will not complete the overview scan  & cannot travel beyond the first 2/3 centimeters. All the communications seem to recognise the scanner and the mode for the intended scan but the necessary overview scan is not completed, nothing comes up on the Image Capture scan window. If I unplug the film adaptor I can get a document scan. When I plug in the adaptor again the Image Capture details change which allows me to select the type of scan required but when the scanner attempts an overview scan it is unable to complete it.
    I have had the scanner from new (12 Years) and have previously scanned slides and film with the adaptor but maybe this was before I upgraded my computer (imac 27").
    Do I have to buy a new scanner?  It seems so close to working correctly. 
    I have downloaded the Epson recommended driver (5.4) and have Epson Perfection 1200 6.6 Universal showing in the Applications List.
    Any thoughts or observations would be much appreciated before I go out and spend money an new hardware.
    Thanks

    I have same issue - have you solved this yet?

  • I am not able to download my photos from my iphone 4 to image capture or iphoto. Help?

    I am not able to download my photos from my iphone 4 to image capture or iphoto. i am able to see the jpg files but not see the preview and when i tried downloading, it says error. what can i do? i didnt have such a problem previously pls advise. Thank you

    can you tell us the error?  difficult to help you without more information.

  • I'm trying to delete multiple pix in iPhoto that i stupidly made duplicates of without knowing, I've tried going into the applications folder and using image capture but i think I've missed a step , can anyone send the correct info / steps pls thanks

    I'm trying to delete multiple pix in iPhoto that i stupidly made duplicates of without knowing, I've tried going into the applications folder and using image capture but i think I've missed a step , can anyone send the correct info / steps pls thanks

    again image capture is not involved with deleting photos from iPhoto in any way ever
    the paid version of iPhoto Library Manager is very good for finding duplicates as is Duplicate Annihilator
    And I have no idea who told you this - or what it means - but re-read both of my opening statements
    I was told I could delete multpiles thru image capture by transferring my iPhoto library etc
    LN

  • Pictures from my Sony HDR-CX110 uploads easy in image capture but how do i upload videos? I don't even see my videos anywhere on the screen! I'm puzzled.

    Pictures from my Sony HDR-CX110 uploads easy in image capture but how do i upload videos? I don't even see my videos on the screen. I'm puzzled!

    Photo Stream does not do videos. For videos, you must import to your computer. You can use iPhoto to import them.

  • I have an "Untitled" test service that no longer exists in Library/Services/ but still loads in the context menu and finder services menu.  How do I get rid of it?

    I created an "Untitled" test service, then deleted it.  It no longer exists in Library/Services/ but still loads in the context menu and finder services menu.  Reboots do not change the behavior.  How do I get rid of it?

    ... and mysteriously, it's gone again.  Multiple reboots across the day between then and now, plus a few hibernations as I moved about.  It's as if Finder cached the [deleted!] workflow file and continued to operate off of the cache for an indeterminate time....

  • HT4505 I see my scanned picture in image capture but how do you get it to iPhoto?

    I can see my scanned picture in image capture but how do you het it in iPhoto or on your desktop?

    Hello:
    It has options to "scan to..."  If I scan using Image Capture, I scan it to the desktop (jpeg).  If you want to get it into iPhoto, open iPhoto and import the picture.
    Barry

  • One original Intro cartridge no longer recognized by HP Officejet 6500a Plus printer

    The original "Intro" Magenta cartridge in my HP 6500a Plus is no longer recognized by the printer.
    The other "Intro" color cartridges (cyan and yellow) have a little ink left, and are recognized, along with a non-Intro HP black cartridge.
    I didn't use this printer a lot. What would cause just one cartridge to no longer be recognized by the printer?
    I can't use this printer at all now because of this. Not even for black-only printing... Not even for scanning!
    Edit:
    More info: The Magenta cartridge has an expiry of 2013/08, and the other 2 color cartridges have an expiry of 2013/09.
    Hmm.. are these cartridges designed to self-destruct about 6 months after expiry, even if they have some useable ink left in them?
    In a month or so, will the other 2 quit being recognized as well?
    I get:
    Ink System has failed (0xc19a0020)
    Ink System has failed (0xc19a0022)
    See attached pics for cartridge specific messages:
    I've done Solution one: Reset the printer.
    Done Solution two: Remove, clean, and reinstall the printhead.
    Done Solution three: Reset the product (looks like the first solution).
    I'm going to but a new Magenta cartridge and see if the problem goes away..

    I just discovered the Embedded Web Server on my E710n-z printer. Very cool!
    But it shows conflicting information from what the LCD panel shows:
    (it shows the printer head as damaged)
    And here, it recognizes the Magenta cartridge as empty:
    I only printed 132 pages in the lifetime of this printer and the head is gone?

  • IPhone 4 not recognized by Image Capture

    help! so i'm trying to transfer photos i've taken with my iphone to my mac. when i open image capture, the iphone doesn't pop up as a recognizable device. tried to google the issue and to no avail... any help is appreciated! thanks

    I had the same issue and when I searched for a solution, all I found was your question. So I messed around a bit and got it working.
    I'm no computer engineer, so I did about 3 things at once rather than 1 at a time. Thus, I don't know if it was one step or a series of steps that got things working again so I'll tell you what I did and you can take it from there.
    I had the iphone 4 connected with the cable. I had image capture running. It listed the proper number of images but I couldn't see the thumbnails and when I downloaded all, the newest ones didn't download.
    In image capture, I went to the devices menu and clicked "browse devices" and unchecked iphone. Then I did a hard reset of the iphone by pressing the home and power button at the same time until the apple logo appeared. Image capture said no devices were connected. After the reboot (while still plugged into the USB), image capture showed my phone and all the thumbnails correctly.
    I'm guessing it was just the reboot that did the trick.
    good luck.

  • Canon PIXMA 860 and 560 not recognized by Image Capture

    I can scan from the printers to my MacBook. And I go to System Prefernces / Printers and Faxes and both are shown as printers and as scanners. I can open from their and scan but when I open image capture it doesn't find any scanners.
    I down loaded and installed both the newest canon printer and scanner drivers as well as the newest ICA driver. Still they are not recognized.
    What am I missing?

    ATC7 wrote:
    Just for testing purposes, I removed the canon printer, removed all canon software and updates from my system and then used the original CD that came with my 870 to reinstall the printer and lo and behold, Image Capture started working again for wireless scanning.
    Hello and thanks for the feedback.
    There are two scanner drivers available for many of the new models of Canon AIOs. There is the ICA driver and the Canon scanner driver.
    During my tests on clean builds of 10.6.x I found that my Canon AIOs were able to print and scan via wireless by simply installing the Canon update provided by Apple. This update consisted of the then latest printer driver for many models of Canon AIO and inkjet and the ICA driver. Canon's scanner driver was not included as part of this download from Apple.
    The ICA driver is installed in HD > Library > Image Capture > Devices and the package is called Canon IJScanner1. Later versions of the ICA driver also installed another package, Canon IJScanner2. These ICA drivers provide a minimal amount of scanning selections and only appear to work with Image Capture and Preview. Other applications like Canon's own MP Navigator and Adobe Acrobat Pro will not scan with just the ICA driver installed. The Canon scanner driver for the respective model is required.
    From what you have said and from my own testing I propose that the original CD did not contain the ICA driver but the Canon scanner driver for the MX870. And with only this driver installed you were able to scan using Image Capture via the wireless. I don't recall ever testing a 10.6 build where only the Canon scanner driver was installed and not the ICA driver (it is present by default on 10.6 but only has older models of Canon AIO's - your MX870 is not there). Had I tested this I believe that I would have been able to scan via wireless using Image Capture.
    I also propose that once you installed the Canon v2.4.1 update, which contains a version of the ICA driver package that is also available from Canon web sites, then Image Capture stopped using the Canon MX870 scanner driver and used the ICA driver instead, thus stopping you from wireless scanning.
    Right now I am using a new build of 10.6.6 on my MBPro. So that I could print to my MP990 at home and an MG6150 at work I simply installed the v2.4.1 update and have printer and scanner queues in Print & Fax for both. I have not installed scanner drivers for either device and at home with my MP990 Image Capture does not show any device being available, while Preview does show the MP990 once I select 'Import from Scanner > Include Networked Devices'. Also, Acrobat Pro 9 does not show my MP990 being available.
    And with regards to the v2.4.1 update, the drivers included are provided by Canon to Apple, just as the other vendor drivers are provided to Apple, to make life easier for us Mac users. The drivers are available individually and get downloaded and installed automatically when the respective model is connected to the Mac and no local driver is present. As for the package including all these individual vendor drivers, this would be created by Apple.
    Pahu

  • Why can I see my device appearing on Image Capture but no photos pop up?

    I had to re-format my Mac and my external hard drive today due to a suspected virus.
    My photos now only exist on my iPhone and iPad, and I would like to transfer them to my computer. However, when I open up Image Capture, all I see is my device listed in the left-hand column but no pictures pop up. I tried it on both my iPhone and iPad with the same result.
    Please help or provide an alternative to Image Capture as I cannot bear to lost 3,000 irreplaceable photos!
    Thank you in advance!

    I don't use iCloud for backing up because I currently live in Indonesia where connection to the internet is not the greatest.
    I did use Time Machine for backing up my stuff but I had to delete everything because of the suspected virus.
    What a bind I have put myself in!

  • USB drive no longer recognized in macbook pro but recognized by other macbook pro

    USB drive previously recognized, removed without correctly ejecting, now not recognized at all.  Tried it in other macbook pro and it popped up just find.  I can see it in Utilities/Disk Utility area and tried to repair but still not showing up in Finder.

    You may get more specific help in the Notebooks section https://discussions.apple.com/community/notebooks/macbook_pro
    This area is for the Mac Pro (desktop).

  • Canoscan 4400f not recognized by image capture

    My imac with lion installed will not recognize my canoscan 4400f scanner. My white macbook is fine.
    I have tried using Cannon software and it tells me no driver is found.

    I had the same issue and when I searched for a solution, all I found was your question. So I messed around a bit and got it working.
    I'm no computer engineer, so I did about 3 things at once rather than 1 at a time. Thus, I don't know if it was one step or a series of steps that got things working again so I'll tell you what I did and you can take it from there.
    I had the iphone 4 connected with the cable. I had image capture running. It listed the proper number of images but I couldn't see the thumbnails and when I downloaded all, the newest ones didn't download.
    In image capture, I went to the devices menu and clicked "browse devices" and unchecked iphone. Then I did a hard reset of the iphone by pressing the home and power button at the same time until the apple logo appeared. Image capture said no devices were connected. After the reboot (while still plugged into the USB), image capture showed my phone and all the thumbnails correctly.
    I'm guessing it was just the reboot that did the trick.
    good luck.

Maybe you are looking for