Epson r800 prints, but does not appear in Printer List: can't use Utilities

My Epson r800 prints, but does not appear in Printer List. It is connected via USB to the iMac. A Brother LH-2070N is connected via AirPort Extreme. I need to use Utilities to clean the head of cartridge, check levels, etc.. Is there a way to fix this problem?
iMac Mac OS X (10.4.9)

For your Epson try this:
Hard Drive, Library, Printers (folder), Epson folder,
Inkjetprinter folder, Utilities folder and here you
will find Epson Printer Utility2. Click on it and it
should work.
Note. Epson utilities will not work unless the
Printer is directly connected to the computer.
Had the same issue with my 2200 photo and the above
worked.
Tried again after reinstalling the drivers. There is no separate Inkjet Folder, but the Printer Utility is within the Epson folder. Unfortunately, the r800 still does not appear in the Printer List, hence no utility.

Similar Messages

Can't print from safari to hp 4620 appears to print but does not first to print from safari notes print no problem any suggestions?

Can't print from safari to hp 4620 appears to print but does not first time i have attempted to print from safari , notes print fine no problems. It is like on a desktop my print is sitting in the queue there are error messages only the usual print dialogue. I've turned the printer off and back on with no luck any suggestions?

That's very strange. See if clearing the cache in Safari will make it work. I'll include the steps below. If that doesn't help, install a different browser, such as Opera, to see if that will print from pages that Safari won't. If it will, then something is wrong with Safari. If it doesn't print, then the web pages might have printing blocked. There are sites that are doing that for copyright reasons. Let me know what you find.
To clear the cache on Safari:
Open Settings.
Select Safari
Touch Clear Cache.
Select Clear.
Touch Clear Cookies.
Select Clear.
Touch Clear History.
Select Clear.
I am a printer tech for HP.

New Downloaded/Installed Cannon PPD Print Driver does not appear in driver list

I have downloaded and installed every new driver, 5 times, including he PPD driver for the Canon imagerunner 5570 printer, however when I add the printer the PPD driver does not appear in the list of drivers. the printer is on a wireless network and I was able to print before updating. I had not set up Time Machine until today so I can't go back, or can I. I am a new Mac owner so please be gentle.
Thanks

The PPD installer will copy files to HD > Library > Printers > PPDs > Contents > Resources > en.lproj and the file names will be "cnxxxx.pdd". Can you first check that you have all the files installed.
If you do have the files then you can add the printer using IP > LPD for the protocol. Note that the iR5570 does not support Bonjour so it won't appear in the Default view of Add Printer as Zlig suggested. You then enter the IP address of the iR5570, leave the queue name blank, change the name to something meaningful and then search for the ir5570 in the Print Using menu.
If there are no Canon iR models listed in the Printer List (typing iR in the Search field will determine this) then you should try resetting the printing system as follows.
1. Open System Preferences > Print & Fax
2. Move the mouse over the Printers list.
3. Hold down the Control key and then click the mouse
4. Click on the 'Reset printing system' pop-up
5. Close Print & Fax and restart your Mac
This will remove all the printer queues from Print & Fax but will not remove the printer drivers installed on the Mac. So you can try adding your print queue to the iR5570 again using the process above.

Hp officejet 4500 prints but does not appear in devices and printers in Windows 7

My wireless hp officejet 4500g prints fine wirelessly but it does not appear in Control Panel Devices and Printers in Windows 7. Do I have to go through all that uninstall and reinstall. I've used Window 7 Troubleshooting Printer check and all was fine.. Thanks for any help

Hi,
If the printer successfully print, it do exists within Devices and Printers..
Windows 7 may merge several devices into a single icon, right clicking a merged icon will let you then choose the specific device as you may see in the following screenshot as a sample:
Check any existing printer icon and locate the one your printer combined with..
If none of the printers does not list the 4500 printer make sure to right click the Computer icon within the Devices category, I notiice the printer sometimes merged within the computer as well, then you will see any printer options (e.g. Printer Properties, Printing Preferences within the computer menu.
Hope that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

One field is visible in print preview but does not appear when printed

Hi,
We have a batch job that creates the spool, but one field of the form is visible during print preview of the spool but is NOT visible in the print out.
How do we solve this?
Is there an error in the printer?
Thank you!
Rgds,
Freishz

Hi guys,
The catch is, when re-printed, it already appears. But after the batch job has been completed, this does not automatically appear.
This involves, output type of a delivery.
Thanks for your reply!

Print job does not appear in print queue

At first after a restart of my vista computer, printing works fine. Then, after awhile, when I want to print, I can't, and nothing appears in the print queue. The same thing happens to both my HP L7780 and HP C309A.

Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Album artwork does not appear in album list or grid

I added album artwork (did get info then copy and paste) and it shows up fine in cover flow but does not appear in album list or grid view.
What am I doing wrong? Artwork files were scanned from album covers that I have.

Your album artwork cache may be corrupt. Provided most, if not all, of your artwork is embedded you can simply delete the Album Artwork folder that you will find inside your main iTunes folder and then scroll slowly through the library in Grid/Albums mode to rebuild it. Any images that were "downloaded" rather than embedded will need to be reacquired.
Threre are separate folders for the downloaded and cached images, but I've always gone for a complete rebuild so I don't know it would work to delete just the cached folder.
tt2

TS3147 I seem to have lost fax capability with Snow Leopard. Does not appear in Print as before. Cant find fax in system Preferences. No drivers for fax found Bob Wines.

I seem to have lost fax capability with Snow Leopard.
Does not appear in Print as before. Cant find fax in System Preferences. No drivers for fax found.
Initially said it was downloading software but no longer does this. Fax test works on HP site.
Using HPC410aHP Photosmart Premium
Any help would be appreciated.
Bob Wines.

Thanks for your detailled description of the faxmodem installation!
I've tried this with Mac OS X v10.8 Mountain Lion and it works fine.
I've to type "cupsctl WebInterface=yes" in terminal to see the interface.
Does anybody know, if send faxes are saved somewhere?

Printer driver for lexmark x6570 does not appear in printer setup utility

Hi
I have just bought a lexmark x6570 wireless printer and have installed the driver on my powerbook, set up the printer (using a usb lead as instructed) but am unable to print anything as the printer driver does not appear in the printer setup utility. I have even tried to move the folder that was created on the desktop to the printer folder in the library folder but still no joy.
Someone help me please!

@YDNA1958
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

My ipod works in itunes but does not appear in "my computer" after I changed the properties

My ipod works in itunes but does not appear in "my computer" after I changed the properties.
First off, I'm using Windows XP (and Mac SnowLeopard) Here's how it started. For some reason my ipod started showing up as a camera when I plugged it in. It works fine in itunes, though. But when I tried to access it from "my computer" it only
showed me the one and only picture I had on my ipod. I deleted that picture hoping it would no longer show up as a camera. When it still did I right-clicked on it in "my computer" and selected "properties". Under "autoplay" I
chose for it to 'not show up' or 'take no action' or some such deal when I plugged it in. I thought that would stop it from popping up the window that asks whether i want to 'open camera wizard' or 'open camera scanning' or 'open folder to view files' or 'take
no action' , etc. But now it won't show up in "my computer" at all. I also have a Mac with SnowLeopard. When I plugged my ipod into it my ipod doesn't show up in "finder" either! So basically my problem is not a mechanical one with hardware
or software; yht ipod still works fine in itunes. I just need to undo the change I made. I've searched all around my preferences, utilities, options, etc. It shows up on my "Device Manager" but not on "Disk Management".
Any help would be very much appreciated. Thanks.

Hi,
To show up in Windows Explorer, you can try placing the iPod into
disk mode.
Moreover, i recommend you to
restore ipod to factory settings.
If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
Here is an article you can refer to below:
http://support.apple.com/kb/TS1369
To get more help, you can also redirect to apple support forum:
http://www.apple.com/support/ipod/
Thanks!
Andy Altmann
TechNet Community Support

HT1386 My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?

Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
Documents say
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
But I can't see my iPad Mini in iTunes.
And my Ipad (Settings, General, iTunes Wifi Sinc) shows a message :" Sync will resume when xxx(my PC with iTunes) is available "...
Both are in the same network,
Ipad mini is is plugged in to power
. iTunes is open on the computer
what can i Do ???

Hi Skydiver119, and tks for four interest.
I have done exactly as you say, but it does not work for me.
You indicated " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
I disconnect the wire,
and my iPad disappears from my iTunes screen.
in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
So, I can not sync via wi-fi
I appreciate if you can help me.

TS1538 I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

not recognized by anything: http://support.apple.com/kb/TS1369
recognized by windows, but not itunes: http://support.apple.com/kb/TS1363
solving the problem if the above does not work:http://www.instructables.com/id/What-to-do-when-iTunes-does-not-recognize-your-i Po/step1
(make sure you go to the next slides.

I have installed the font Broadway on my computer and it works in Microsoft Word but does not appear in the font list in InDesign. How can I fix this problem?

I have installed the font Broadway on my computer and it works in Microsoft Word but does not appear in the font list in InDesign. How can I fix this problem?

Start by rebooting the computer. If that doesn't work, search for adobefnt*.lst and delete all instances where * becomes a 2-digit number.

App asks to have location services turned on but App does not appear in location list.

I start the EZ Word Cheats and it starts with the menu open. I click on Quick Import and a blue box appears with the message to turn on Location services in settings. I start the settings app, click Privacy, click Location Services, but EZ Word Cheats does not appear in the list of Apps that can have Location Services turn on. Shutting the iPad off or resetting it does not help.

I reset location services in Setting>General>Reset>Reset Location & Privacy and that fixed the problem. I need not need to restore from new. When I ran EZ Word Cheats after the resetting location services and then clicked on the Quick import under the menu, a message came up asking access to Photos instead of location services. This is the correct behavior since the program does need access to my photos but does not need Location services.

Applet compiles but does not appear...

the applet compiles but does not appear :(
all that appears is a blank box...hopefully someone can help
import java.awt.*;
import java.applet.*;
import java.awt.event.*;
public class program2 extends Applet implements ActionListener
     private Button btLeft, btRight, btUp, btDown, btBgYellow,
     btBgRed, btBgBlue, btBgOrange, btTxtRed,btTxtYellow, btTxtBlue,
     btTxtOrange, btFtHel, btFtCr, btFtTr, btFtSy;
     private MessagePanel messagePanel;
     private Panel p = new Panel();
     public void init()
          p.setLayout(new BorderLayout());
          messagePanel = new MessagePanel("Java is Life");
          messagePanel.setBackground(Color.white);
          //directional buttons
          Panel pButtons = new Panel();
          pButtons.setLayout(new FlowLayout());
          pButtons.add(btLeft = new Button());
          pButtons.add(btRight = new Button());
          pButtons.add(btUp = new Button());
          pButtons.add(btDown = new Button());
          //Background buttons
          Panel BgButtons = new Panel();
          BgButtons.setLayout(new FlowLayout());
          BgButtons.add(btBgRed = new Button());
          btBgRed.setBackground(Color.red);
          BgButtons.add(btBgYellow = new Button());
          btBgYellow.setBackground(Color.yellow);
          BgButtons.add(btBgBlue = new Button());
          btBgBlue.setBackground(Color.blue);
          BgButtons.add(btBgOrange = new Button());
          btBgOrange.setBackground(Color.orange);
          //text color buttons
          Panel txtButtons = new Panel();
          txtButtons.setLayout(new GridLayout(4,1));
          txtButtons.add(btTxtRed = new Button());
          btTxtRed.setBackground(Color.red);
          txtButtons.add(btTxtYellow = new Button());
          btTxtYellow.setBackground(Color.yellow);
          txtButtons.add(btTxtBlue = new Button());
          btTxtBlue.setBackground(Color.blue);
          txtButtons.add(btTxtOrange = new Button());
          btTxtOrange.setBackground(Color.orange);
          //font buttons
          Panel ftButtons = new Panel();
          ftButtons.setLayout(new GridLayout(4,1));
          ftButtons.add(btFtHel = new Button());
          ftButtons.add(btFtCr = new Button());
          ftButtons.add(btFtTr = new Button());
          ftButtons.add(btFtSy = new Button());
          //layout
          p.add(messagePanel, BorderLayout.CENTER);//set center 1st
          p.add(pButtons, BorderLayout.SOUTH);
          p.add(BgButtons, BorderLayout.NORTH);
          p.add(txtButtons, BorderLayout.EAST);
          p.add(ftButtons, BorderLayout.WEST);
          //listeners
          btLeft.addActionListener(this);
          btRight.addActionListener(this);
          btUp.addActionListener(this);
          btDown.addActionListener(this);
          btBgRed.addActionListener(this);
          btBgYellow.addActionListener(this);
          btBgBlue.addActionListener(this);
          btBgOrange.addActionListener(this);
          btTxtRed.addActionListener(this);
          btTxtYellow.addActionListener(this);
          btTxtBlue.addActionListener(this);
          btTxtOrange.addActionListener(this);
          btFtHel.addActionListener(this);
          btFtCr.addActionListener(this);
          btFtTr.addActionListener(this);
          btFtSy.addActionListener(this);
     //implement listener
     public void actionPerformed(ActionEvent e)
          if(e.getSource() == btLeft)
               left();
          else if(e.getSource() == btRight)
               right();
          else if(e.getSource() == btUp)
               up();
          else if(e.getSource() == btDown)
               down();
          else if(e.getSource() == btBgRed)
               red();
          else if(e.getSource() == btBgYellow)
               yellow();
          else if(e.getSource() == btBgBlue)
               blue();
          else if(e.getSource() == btBgOrange)
               orange();
          else if(e.getSource() == btTxtRed)
               redText();
          else if(e.getSource() == btTxtYellow)
               yellowText();
          else if(e.getSource() == btTxtBlue)
               blueText();
          else if(e.getSource() == btTxtOrange)
               orangeText();
          else if(e.getSource() == btFtHel)
               helvetica();
          else if(e.getSource() == btFtCr)
               courier();
          else if(e.getSource() == btFtTr)
               times();
          else if(e.getSource() == btFtSy)
               symbol();
     //directional methods :0)
     private void left()
          int x = messagePanel.getXCoordinate();
          if(x > 10)
               messagePanel.setXCoordinate(x - 10);
               messagePanel.repaint();
     private void right()
          int x = messagePanel.getXCoordinate();
          if(x < (getSize().width - 5))
               messagePanel.setXCoordinate(x + 5);
               messagePanel.repaint();
     private void up()
          int y = messagePanel.getYCoordinate();
          if(y < (getSize().height - 10))
               messagePanel.setYCoordinate(y - 10);
               messagePanel.repaint();
     private void down()
          int y = messagePanel.getYCoordinate();
          if(y < (getSize().height + 10))
               messagePanel.setYCoordinate(y + 10);
               messagePanel.repaint();
     //background methods :)
     private void red()
          messagePanel.setBackground(Color.red);
     private void yellow()
          messagePanel.setBackground(Color.yellow);
     private void blue()
          messagePanel.setBackground(Color.blue);
     private void orange()
          messagePanel.setBackground(Color.orange);
     //text color methods :)
     private void redText()
          messagePanel.setForeground(Color.red);
     private void yellowText()
          messagePanel.setForeground(Color.yellow);
     private void blueText()
          messagePanel.setForeground(Color.blue);
     private void orangeText()
          messagePanel.setForeground(Color.orange);
     private void helvetica()
          Font myfont = new Font("Helvetica", Font.PLAIN,12);
          messagePanel.setFont(myfont);
     private void courier()
          Font myfont = new Font("Courier", Font.PLAIN,12);
          messagePanel.setFont(myfont);
     private void times()
          Font myfont = new Font("TimesRoman", Font.PLAIN,12);
          messagePanel.setFont(myfont);
     private void symbol()
          Font myfont = new Font("Symbol", Font.PLAIN,12);
          messagePanel.setFont(myfont);

You add everything to the Panel p but you never add that panel to the applet. What you probably want is to add everything to the applet. An applet is a special kind of panel so you can just change "p" to "this" everywhere in init and remove the declaration of p at the top.

Epson r800 prints, but does not appear in Printer List: can't use Utilities

Similar Messages

Maybe you are looking for