Epson Stylus Photo 750 not working  after upgrade to,  X.5.2

I'm not sure as to what has happened since my update, however I can't print any type of documents.
However my printer will run a test page on head cleaning, so I know it's not the printer.
I'm thinking it has something to do with the driver, because I keep getting this message...,
/usr/libexec/cups/filter/rasteroepson failed
Tried reinstalling the epson drivers, but had know luck.
Looked through a few threads here in discussions, but did not find anything specific.
Anyone have any thoughts?
Thanks in advance,

Found this link at epson USA. Hope that it helps someone.
http://www.epson.com/cgi-bin/Store/support/SupportLeopard.jsp

Similar Messages

  • Epson Stylus Photo T50 is idle after upgrading to OS X Mavericks, Epson Stylus Photo T50 is idle after upgrading to OS X Mavericks

    Hello,
    I have an Epson Stylus Photo T50 and after upgrading to OS X Mavericks it does work and is idle the whole time.
    I'm from Brazil and would like to know if an update comes out soon or is there another solution for my case?
    I'm waiting for aid

    You probably need an updated driver:
    Epson drivers for Mavericks:
    http://www.epson.com/cgi-bin/Store/support/SupportMavericks.jsp

  • Epson Stylus Photo R280 Stopped Working After Mac OS X Update

    I have an Epson Stylus Photo R280 hooked up to my iMac running Snow Leopard. Yes, I upgraded my drivers months ago to the Epson supplied 10.6x drivers. The other day, Software Update showed an 'Epson Printer Drivers Update' and I installed accordingly. When I try and print now, I get the following error:
    Error: /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Con
    and the job doesn't print. I have tried uninstalling and re-installing the Epson Snow Leopard drivers, but to no avail. Is there a way to uninstall an Apple update? It seems their update has killed my printer and I can't fix it. Any help is greatly appreciated!

    This was very helpful.
    I have an Epson Photo Stylus Photo R260 and, after updating the driver through Software Update in Snow Leopard, got the same error message when I tried to print: "rastertoescpII fail."
    I did as you explained: deleted the printer from system preferences > print & fax; control-clicked to bring up the contextual message and reset my printing system; then downloaded (again) the combo update to the print driver from Epson (the driver designed for Macs running both Snow Leopard and Leopard).
    Everything's working just fine again.

  • Photo stream not working after upgrading to maverick please help?

    have upgraded to Maverick from osx lion
    sooo much trouble ......memory low
    photo stream not working
    everything slow
    any ideas?

    On your Mac disable Photo Stream in the System/iCloud preference pane
    and in iPhoto's Photo Share preference pane.
    Reboot and reenable both respectively. That should jump start Photo Stream.
    OT

  • Epson Stylus Photo 1280 not working with OS X 10.4.3

    I recently updated to Tiger OS 10.4.3 and my Epson Stylus Photo 1280 no longer prints. I've attempted to delete and add it to the Printer List, but get the following error - "An error occurred while trying to add the selected printer." Along with that it reads "successful-ok-too-many-events."
    As well as this, (sorry, possibly off topic) I can no longer download files via Safari, consistantly getting the error "mounting failed." This also occurs when I try to use Software Update as well. I get the message, "Unexpected error occured."
    Any help would be greatly appreciated!
    667 MHz PowerPC G4   Mac OS X (10.4.3)  

    The last Gutenprint release was in July 2012 as version 5.2.9. Therefore, it has not been compiled or tested especially for Mavericks.
    Suggest you reset/remove the Epson printer entry in System Preferences > Printers & Scanners. Then re-add it. Leave your printer power on and connected to the Mac. Perform a software update, this may also offer the Epson Printer Drivers v2.15.1 for OS X (released Sept 11, 2013). This download supports your printer model.
    Read this brief Apple article.
    How to get the previously mentioned Epson Printer Drivers from Apple, if they weren't available through software update.

  • Photo Booth not working after upgrading to 10.6.2

    After upgrading my 24" iMac to 10.6.2, Photo Booth does not work.
    The green light is ON but the Photo Booth window is just black. Built in isight is working with iChat.
    The same happened after i upgraded my MBA.

    palodoma wrote:
    After upgrading my 24" iMac to 10.6.2, Photo Booth does not work.
    The green light is ON but the Photo Booth window is just black. Built in isight is working with iChat.
    The same happened after i upgraded my MBA.
    Welcome to Discussions, palodoma !
    Some other things you can try if necessary:
    (1) Use Disk Utility to repair permissions, restart your Mac, and test whether the problem persists.
    (2) Try all relevant suggestions from http://support.apple.com/kb/HT2090
    (3) If you updated using your Macs'  > Software Update... feature,
    use Disk Utility to repair permissions. Then download and install the
    Mac OS X v10.6.2 Update (Combo): http://support.apple.com/kb/DL959
    Immediately after the restart that completes the update, repair permisssions again.
    Then test whether your problem persists.
    We will watch for your status update.
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
    LED Cinema Display  G4 PowerBook 1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

  • Epson Stylus Photo 1400 not working on 10.6.5

    I've done just about everything I've found online and both epson and apple are in denial of this situation. I'd been on the phone with apple to almost two hours and in the end they tell me that it's probably epson's drivers and that I need to contact them. Another 2 hours with epson pretty much saying I needed to contact apple.
    Is anyone else experiencing this? Whenever I print using word/photoshop or any other apps, I get nothing. My printer icon doesnt ever come up on the dock. Even when I open it manually I see that they werent added to my queue. If I try to print with Preview App, it tells me "Error While Printing"
    I've uninstalled and reinstalled drivers, remove and re added printer, I've checked and repaired disk permissions. What gives? Is it 10.6.5 causing this?

    So I went on and downloaded Print Therapy to see what is going on and here's what it found:
    The directory /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PDEPluginInterface.h is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMCore.h is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMCoreDeprecated.h is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMDefinitions.h is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMDefinitionsDeprecated.h is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMErrors.h is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMPrintAETypes.h is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMPrintAETypes.r is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMPrintSettingsKeys.h is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMPrintingDialogExtensions.h is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PrintCore.h is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PrintCore.r is missing!
    The directory /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Headers is missing!
    The file /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Headers/PMApplication.h is missing!
    The file /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Headers/PMApplicationDeprecated.h is missing!
    The file /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Headers/Print.h is missing!
    The file /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Headers/Print.r is missing!
    The file /usr/share/cups/mime/apple.convs is missing!
    The file /usr/share/cups/mime/apple.types is missing!
    The directory /usr/share/cups/model is missing!
    The file /usr/share/man/man8/cups-calibrate.8.gz is missing!
    The file /usr/share/man/man8/cups-genppd.5.2.8.gz is missing!
    The file /usr/share/man/man8/cups-genppdupdate.8.gz is missing!
    I've already reinstalled 10.6.5 twice to see if that would fix but no luck.

  • Epson Stylus Photo R1800 now working

    I'm posting this because I found help here and hope this will be useful. When I switched to Leopard on my Mac Pro, my R1800 printer stopped working. First it printed everything in a washed out draft mode. Then, even after doing what was suggested in this forum, I still couldn't get back t my original dialogue box, which seemed to be the only way to activate the gloss optimizer for real photo quality.
    This is how I got back to a fully functioning printer (Note: don't skip any steps, like I did initially).
    1. Open up the print and fax dialogue box in system preferences. Highlight the Epson printer and click on the "minus box" to delete that printer driver.
    2. Restart your computer (very important)
    3. Go to the Epson Website (http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 14121&infoType=Downloads) and download Epson EasyPrint v3.1bA and Printer Driver v3.0aAs.
    4. Install both downloads.
    5. Open up the print and fax dialogue box again. If the Epson R1800 shows up again, highlight it and click on the minus sign to delete it again. Then click on the "plus" sign and add the R1800 back.
    6. Look for the menu that says "Print Using." Make sure to select Epson SP R1800 (1) and not the Gutenprint option.
    7. Close the dialogue box and you should be good to go.
    This procedure returned my original (pre-Leopard) set of options to the R1800 and, once again, I'm getting nice prints.
    Note: I do have to access that menu in a new way from Photoshop
    a. make sure the triangle next to Epson Stylus Photo R1800 in the print dialogue box is pointing up to reveal the expanded menu selection.
    b. under the popup menu where "layout" is listed, select "Print Settings" and you should se the menu you are used to for the R1800.
    I hope this helps.

    Kent,
    The problem here is that the original poster is using an Intel-based Mac (Mac Pro). The driver he is referring to ONLY supports Intel-based Macs (Printer Driver v3.0aAs). So, not to put too fine a point on it, but the post should have been entitled "Epson Stylus Photo R1800 Now Working for Intel-Mac - Others SOL" (grin).
    Apparently Epson doesn't think many of us have computers more than a couple years old - and that they shouldn't have to support them.
    The printing problem is one that has been well documented and the lack of drivers apparently only affects those "ancient" PowerPC models, not the Intel-Macs.
    So, the only current solution that I have found to date is:
    1. Replace your decrepid computer with a new Intel-Mac (about $7k in my case)
    2. Replace your Epson printer (I hear that the HP B9180 printers are working) and hope the new one works with your ancient PowerPC.
    3. Hope that Epson gets around to writing a driver for us before our photo business go belly-up.
    Full Disclosure:
    Somewhat tongue-in-cheek, but still extremely frustrated.
    Message was edited by: Gilbert Blankenship1
    null

  • Iphone 4 Home button not working after upgrade to OS 4.3.5

    Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

    It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
    Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

  • File- Export not working after upgrade from 11i to R12

    Hi,
    File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
    If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
    Thanks and Regards,
    Jagadeesha

    Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
    In Argument 0 - Type: Integer Value: 196613
    In Argument 1 - Type: Number Value: 54
    Out Argument 0 - Type: String Value: 12
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Entering app_menu.set_prop.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing FIND_MENU_ITEM Built-in:
    In Argument 0 - Type: String Value: FILE.EXPORT
    Out Argument 0 - Type: Integer Value: 19
    Executing GET_MENU_ITEM_PROPERTY Built-in:
    In Argument 0 - Type: Integer Value: 19
    In Argument 1 - Type: Number Value: 79
    Out Argument 0 - Type: String Value: TRUE
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_menu.set_prop.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
    Out Argument 0 - Type: String Value: NORMAL
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
    Out Argument 0 - Type: String Value: NORMAL
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: NULL
    In Argument 1 - Type: String Value: GLOBAL.OUT
    Executing USER_EXIT Built-in:
    In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
    FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
    FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.OUT
    Out Argument 0 - Type: String Value: N
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_form
    Out Argument 0 - Type: String Value: FNDCPVCM
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_block
    Out Argument 0 - Type: String Value: MASTER
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_form
    Out Argument 0 - Type: String Value: FNDCPVCM
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_block
    Out Argument 0 - Type: String Value: MASTER
    Executing GET_APPLICATION_PROPERTY Built-in:
    In Argument 0 - Type: Number Value: 75
    Out Argument 0 - Type: String Value: IHR40P
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
    FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
    FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
    # 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
    WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
    # 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
    WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

  • Ipohone 4 hotspot not working after upgrading to ios7.1 ?

    my ipohone 4 hotspot not working after upgrading to ios7.1 but my some friends having iphone 4s its works fine and those having iphone 4 it's not working although we all have same operator and same operating system (i.e ios 7.1).I think this is problem only  with iphone 4 users with ios 7.1 , so apple plz fix it in ur next update.

    You don't like the answer?
    Again it's not a bug, use a supported carrier if you want Personal Hotspot.
    Read the list one more time, if carrier is not on the list, IOS7.1 patch the loophole.
    Message was edited by: ckuan

  • Web Service is not working after Upgrade SAP EHP6

    Hi ,
    Recently we upgraded SAP ECC 6.0 to EHP 6.
    We have a custom web service which is consumed in  .NET Application to get the Sold To from Sales Order.
    the service is working perfectly before upgrade and it is not working after upgrade to EHP6.
    When I tested the Service in WS Navigator in SAP, it is working fine.
    We raised a message to SAP and SAP analyze the Traces and confirm that the HTTP Request Header coming from .NET application is not having User ID and Password , so it is throwing exception from SAP as unauthorized.
    But in service it is configuration as basic authentication and log on using user id and password and .NET application is calling service by passing user ID & Password.
    Customer is not happy as it is working before Upgrade and SAP confirmed every thing fine in SAP, but the service is not working.
    we did the below steps.
    Regenerated the configuration
    Re imported the Certificates
    Activated the service in SICF.
    Please let me know if anybody have same problem or if any steps we are  missing.
    thanks.
    Uma

    after changing the .NET Application , Service is working fine.

  • TS1702 My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem?

    My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem? Can somebody help me please?

    The App store is a problem for many and I have not seen a solution.
    What is "wrong" with your Apple ID?
    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.

  • IPhone 4's WIFI has been not working after upgraded to 6.1.3(10B329)

         My IPhone 4 was working fine with its WIFI when it is running in default IOS version, I believe it was 5.x.x version, however after I upgraded to 6.1.3(10B329) then WIFI got very aweired issues again and again.starting from then I never get my WIFI working again:
    1. Sometimes I can connect to my home's network and keep alive for 1-2 minutes then WIFI will not work on IPone, my home's router is not working either, I need to restart my home's router manually;
    2. I can connect to my office's network and keep alive 5-10 minutes then WIFI is not working, however my office router is not affected; however the following days then I can't connect WIFI to office's network any more.
    3. I tried to connect to other public area's free network via WIFI, however never joined in.
         I called Apple's service centre couple of times they have no clues, they said they never met this problem before for WIFI not working after upgraded to IOS 6.1.3 and no suggestions from them at all, every time I called them they gave me the same suggestion, such as restore-re-install, check your own router etc, nothing help, however my friend bought a brand new IPhone 4 with default IOS version 6.1.3 which is working perfectly without any issues on its WIFI then I believe this is a completely software issue.
         I know this is a general issue for Apple users and I refuse to upgrade to higher version as I am not sure the higher version can fix this issue however I am pretty sure the newer version of IOS did bring a lot of new bugs, anyone can provide me any suggestions guys ? THANKS A LOTTTTTTTT!!!!!!!!!!!!!!!!
    Terrence

    I have fixed this issue after upgraded my router's firmware finally, this is a completely compatibility issue between Apple and other third party manufactures, hopefully we can get compabitlity list for each future IOS version ahead of time which can potentially avoid such kind of embarrassing situations moving forward, thanks !

  • IMessage does not work after upgrade to iOS 8.1.3 to my iPad 4

    iMessage does not work after upgrade to iOS 8.1.3 on my iPad 4

    I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

Maybe you are looking for

  • Can we hide some data in alv report list,if so how to hide that data.

    in my report for single object type i will have 3 to 4 remarks which comes in the next line, so along with that remarks i must have the same object type but it should be in a invisible mode.

  • Ipod touch (4th gen) not recognised by windows 7 computer!

    Hello everyone I have been unable to use itunes for a good while now because my computer will not recognise my ipod touch. My laptop makes a noise like it is configuring when I plug my ipod into it but then absolutely nothing happens. When I checked

  • IMac still wants to connect to LogMeIn!

    Hi there, I opened Console and noticed that every few seconds I got this message 22/09/2012 17:52:16 com.apple.launchd[1] (com.logmein.hamachi[274]) posix_spawn("/Library/Application Support/LogMeIn Hamachi/bin/hamachid", ...): No such file or direct

  • OS X starting in graphic mode only - no single user, no recovery

    My intel-mac (2008, Yosemite 10.10.2) is suddenly only starting in graphic mode. No keyboard-commands during start-up are working - neither "r" for recovery-mode nor "alt" for chosing the startup-disk nor "s" for single-user-mode. What may be wrong h

  • Substitution variable in a select statement

    I have a cursor as follows: cursor c2 is select'word',cuel.curricular_component_name,cuel.curricular_element_name,phase,cuel.curricular_type,student_contact_hours,faculty_name,objective,cuel.curricular_component_id,cuel.curricular_element_id from v_c