Equipment not updated in all tables properly
Hi Friends
Equipment was updated in EQUI table with limited data only and not updated in other tables EQKT, EQUZ. When I go through the IE03, there I am unable to find the equipment. Material and serial number provides the equipment, I know it, but if we check it in IQ02 for the serial number with the material, I was unable to see the equipment details those are sales and distribution tab and some tabs not updated and equipment not activated. When I tried to activate the equipment in IQ02, system allows saving the document. When I am coming back, system is giving the update termination error. I think at the time of creating user might have done some mistake, but I am unable to find it
Could you please let me know the reason and possible solution?
Thanks in advance
Ravi
hi
After creating the equipment in IE01 ,you are not able to change in IE02 or display the same in IE03, then kindly check with your basis team for your update termination error
regards
thyagarajan
Similar Messages
-
Automatic payment program (F110) document are not update in PAYR table
Hi all,
I have make payment in F110 (automatic payment) to customer
But it is not update in PAYR table
Please guide me what I have to do for documents update in PAYR table
Thanks and Regards,
PrudhviHi,
It is possible to enter multiple documents.
You can enter a list of single documents or in intervals.
Enter the document number in ascending order.
Ex:
Individual documents.
10001,10003,10011
If the documents are in a sequence you can enter the Interval like this
(10001,10011)
Hope it helps you
Regards
Andrew
Edited by: Andrew J on May 28, 2009 4:26 PM -
Excise Base amount not updated in J_1iexcdtl table -reg
Dear Gurus,
We have used SAP Ecc 5.0 Patch level 21. In patch level 20, SAP admit without delivery , can do commercial billing and excise billing in foreground. After batch update SAP not support excise invoice creation in foreground. It support only background. We have 2 senario. 1 is capex sales . ie. without material stock we have raise the comm.billing and excise billing. 2 is supplimentary billing. both the senario now getting effected because of no delivery. Asper SAP advise we have setting for background process excise invoice creation. Excise invoice created. but excise base amount not updated in j_1iexcdtl table. Using J_1I7_USEREXIT_CALC_EXC_BASE user exit we are trying to update the same. For single material it works fine. But more than one material for the first material's base amount is updated in all materials. for your reference i have mentioned the codding . SAP advise it is possible to update excise base amount. But not possible to do. pl.adivse if any correct or guide to solve it.
FUNCTION J_1I7_USEREXIT_CALC_EXC_BASE.
""Local Interface:
*" IMPORTING
*" VALUE(EXCITM_BASE) TYPE KOMV-KAWRT
*" VALUE(POSNR) TYPE VBRP-POSNR
*" EXPORTING
*" VALUE(EXCITM_BASE) TYPE KOMV-KAWRT
*" TABLES
*" KONV STRUCTURE KONV
*{ INSERT RDSK925285 1
TABLES : KONV.
data : W_INDEX LIKE SY-TABIX.
DATA :ITAB LIKE TABLE OF KONV WITH HEADER LINE.
DATA :ITAB1 LIKE TABLE OF KOmV WITH HEADER LINE.
ITAB1[] = KONV[].
DATA : BEGIN OF I_TAB OCCURS 0,
KAWRT LIKE KONV-KAWRT,
POSNR LIKE VBRP-POSNR,
END OF I_TAB.
LOOP AT ITAB1.
READ TABLE ITAB1 WITH KEY KSCHL = 'JMOD' KPOSN = ITAB1-KPOSN.
IF SY-SUBRC EQ 0.
EXCITM_BASE = ITAB1-KAWRT.
POSNR = ITAB1-KPOSN.
ENDIF.
ENDLOOP.
*} INSERT
ENDFUNCTION.
Thanks & Regards
R.Udayakumarsolved with the same user exit
-
Line item for header material not updating in COEP table
Hi all,
from last few days, I found that when I do confirmation and GR for process order, system is updating all line ( i.e. components, activity types) but line for header material that is finished goods or semi finished goods is not updating in COEP table, I have done GR for order and transferred stock from quality too.
But still its not updating. What could be the reason for it .
Thanks
Vivek VarunHi Krishnendu,
Thanks for the reply , FI document is not getting generated.
What could be the reason for it, as before it was working fine.
Thanks
Vivek Varun -
Dear Experts,
From MARA table field STAWN (Comm./imp. code EU ) is not updating in MARC table field STAWN (Comm./imp. code EU ) by MM02 Transaction
Is there any SAP standard functionality to over come above issue or needed ABAP coding for the same ????
Regards
HanumantDear All,
Thanks for your reply
I tried to update the the field after adding plant and other detail actually that field will be gray mode (display) and cannot update
my question i want to update MARC_STAWN field (Forign trade import) for my existing all material , those material MARA_STAWN (basic data 3 ) is also blank but system is allowing me to update in MARA_STAWN (basic data 3) but system will not update to MARC_STAWN (Forign trade import) field.
What is the best method to Coppy all MARA Stawn fields to the MARC Stawn field.
Regards
Hanumant. -
PO no is not updateing in MSEG table for transfer posting wrt PO
Hi All ,
PO number not updateing in MSEG table field EBELN for transfer posting with reference to PO . What should be the reason . This is for subcontracting process .Hi Raghavendra Balegar
If u r doing through scheduling agreement then it will not sit in MSEG. only if u doing through standard PO i.e. NB then only u can view the data of PO in MSEG.
Regards
Ram -
BAPI_ACC_DOCUMENT_POST does not update BKPF/BSEG tables
Hello,
I used bapi_acc_document_post to post a accounting document The following routine says that the document is successfully posted, however, does not update the acccounting tables. I read several messages on the SDN and unable to get the correct answer.
Your help is appreciated.
Regards
William
REPORT ze_bapi_acc_document_post .
SELECTION-SCREEN BEGIN OF BLOCK bl01 .
SELECTION-SCREEN ULINE.
PARAMETERS:
ref_key LIKE bapiache01-obj_key DEFAULT 'TEST000001BAPICALL',
dest LIKE bdi_logsys-logsys DEFAULT ' '.
SELECTION-SCREEN END OF BLOCK bl01 .
DATA:
gd_documentheader LIKE bapiache09,
gd_customercpd LIKE bapiacpa09,
gd_fica_hd LIKE bapiaccahd,
it_accountreceivable LIKE TABLE OF bapiacar09 WITH HEADER LINE,
it_accountgl LIKE TABLE OF bapiacgl09 WITH HEADER LINE,
it_accounttax LIKE TABLE OF bapiactx09 WITH HEADER LINE,
it_criteria LIKE TABLE OF bapiackec9 WITH HEADER LINE,
it_valuefield LIKE TABLE OF bapiackev9 WITH HEADER LINE,
it_currencyamount LIKE TABLE OF bapiaccr09 WITH HEADER LINE,
it_return LIKE TABLE OF bapiret2 WITH HEADER LINE,
it_receivers LIKE TABLE OF bdi_logsys WITH HEADER LINE,
it_fica_it LIKE TABLE OF bapiaccait WITH HEADER LINE,
it_accountpayable LIKE TABLE OF bapiacap09 WITH HEADER LINE,
it_paymentcard LIKE TABLE OF bapiacpc09 WITH HEADER LINE,
it_ext LIKE TABLE OF bapiacextc WITH HEADER LINE.
PERFORM fill_internal_tables.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_CHECK'
DESTINATION dest
EXPORTING
documentheader = gd_documentheader
customercpd = gd_customercpd
contractheader = gd_fica_hd
TABLES
accountgl = it_accountgl
accountreceivable = it_accountreceivable
accountpayable = it_accountpayable
accounttax = it_accounttax
currencyamount = it_currencyamount
return = it_return.
WRITE: / 'Result of check all:'. "#EC NOTEXT
PERFORM show_messages.
DATA: l_type LIKE gd_documentheader-obj_type,
l_key LIKE gd_documentheader-obj_key,
l_sys LIKE gd_documentheader-obj_sys.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
EXPORTING
documentheader = gd_documentheader
customercpd = gd_customercpd
contractheader = gd_fica_hd
IMPORTING
obj_type = l_type
obj_key = l_key
obj_sys = l_sys
TABLES
accountgl = it_accountgl
accountpayable = it_accountpayable
accounttax = it_accounttax
currencyamount = it_currencyamount
return = it_return
EXCEPTIONS
OTHERS = 1.
WRITE: / 'Result of post:'. "#EC NOTEXT
PERFORM show_messages.
REFRESH IT_RETURN.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'.
IMPORTING
RETURN = IT_RETURN.
COMMIT WORK. .
BREAK-POINT.
Form fill_internal_tables
FORM fill_internal_tables.
PERFORM fill_header.
PERFORM fill_accountgl.
PERFORM fill_accountap.
PERFORM fill_accounttax.
PERFORM fill_currencyamount.
ENDFORM. " fill_internal_tables
Form Show_messages
FORM show_messages.
IF it_return[] IS INITIAL.
WRITE: / 'no messages'.
ELSE.
SKIP 1.
LOOP AT it_return.
WRITE: / it_return-type,
(2) it_return-id,
it_return-number,
(80) it_return-message,
it_return-message_v1,
(20) it_return-parameter,
(3) it_return-row,
it_return-field.
ENDLOOP.
ENDIF.
ULINE.
ENDFORM. " Show_messages
FORM fill_accountgl *
FORM fill_accountgl.
Actual invoice line
CLEAR it_accountgl.
it_accountgl-itemno_acc = 2.
it_accountgl-gl_account = '0000009223'.
it_accountgl-item_text = 'Line Iten'. "#EC NOTEXT
it_accountgl-profit_ctr = 'DNDDUMMY'.
it_accountgl-comp_code = '0180'.
it_accountgl-tax_code = 'IG'.
it_accountgl-FUNDS_CTR = '1985BA'.
it_accountgl-COSTCENTER = '1985BA'.
it_accountgl-FUND = 'C113'.
it_accountgl-TAXJURCODE = 'CAON'.
APPEND it_accountgl.
ENDFORM. "fill_accountgl
FORM fill_header *
FORM fill_header.
CALL FUNCTION 'OWN_LOGICAL_SYSTEM_GET'
IMPORTING
own_logical_system = gd_documentheader-obj_sys.
OBJ_TYPE has to be replaced by customers object key (Y* or Z*)
gd_documentheader-obj_type = 'BKPFF'.
gd_documentheader-obj_key = ref_key.
gd_documentheader-BUS_ACT = 'RMRP'.
gd_documentheader-username = sy-uname.
gd_documentheader-header_txt = 'BAPI Test'. "#EC NOTEXT
gd_documentheader-obj_key_r =
GD_DOCUMENTHEADER-reason_rev =
gd_documentheader-comp_code = '0180'.
GD_DOCUMENTHEADER-AC_DOC_NO =
gd_documentheader-fisc_year = '2008'.
gd_documentheader-doc_date = sy-datum.
gd_documentheader-pstng_date = '20070901'.
GD_DOCUMENTHEADER-TRANS_DATE = SY-DATUM.
GD_DOCUMENTHEADER-VALUE_DATE =
GD_DOCUMENTHEADER-FIS_PERIOD =
gd_documentheader-doc_type = 'RE'.
gd_documentheader-ref_doc_no = '6000009268'.
GD_DOCUMENTHEADER-COMPO_ACC = 'FI'.
gd_documentheader-bus_act = 'RFBU'.
ENDFORM. "fill_header
FORM fill_ap *
FORM fill_accountap.
vendor line
CLEAR it_accountpayable.
it_accountpayable-itemno_acc = 1.
it_accountpayable-comp_code = '0180'.
it_accountpayable-pmnttrms = '0006'.
it_accountpayable-TAX_CODE = 'IG'.
it_accountpayable-vendor_no = '0001200051'.
it_accountpayable-item_text = 'Vendor Line'. "#EC NOTEXT
APPEND it_accountpayable.
ENDFORM. "fill_accountap
FORM fill_tax *
FORM fill_accounttax.
tax line
CLEAR it_accounttax.
it_accounttax-itemno_acc = 3.
it_accounttax-gl_account = '0000081710'.
it_accounttax-tax_code = 'IG'.
it_accounttax-acct_key = 'VST'.
it_accounttax-TAXJURCODE = 'CA00'.
APPEND it_accounttax.
ENDFORM. "fill_accounttax
FORM fill_currencyamount *
FORM fill_currencyamount.
CLEAR it_currencyamount.
it_currencyamount-itemno_acc = 1.
it_currencyamount-curr_type = '00'.
it_currencyamount-currency = 'CAD'.
it_currencyamount-amt_base = '106.00'.
APPEND it_currencyamount.
CLEAR it_currencyamount.
it_currencyamount-itemno_acc = 2.
it_currencyamount-curr_type = '00'.
it_currencyamount-currency = 'CAD'.
it_currencyamount-amt_base = '100.00'.
APPEND it_currencyamount.
CLEAR it_currencyamount.
it_currencyamount-itemno_acc = 3.
it_currencyamount-curr_type = '00'.
it_currencyamount-currency = 'CAD'.
it_currencyamount-amt_base = '6.00'.
APPEND it_currencyamount.
ENDFORM. "fill_currencyamountU have to implement the BADI for this.. ‘AC_DOCUMENT’
Add source code into Method: CHANGE_INITIAL & CHANGE_AFTER_CHECK,
*---<SAPLBPFC> is for Posting with BAPI: BAPI_ACC_DOCUMENT_POST
*---<SAPCNVE > is for Posting(Tax) with BAPI: BAPI_ACC_DOCUMENT_POST
*---<SAPMSSY1> is for Test(Check) with BAPI: BAPI_ACC_DOCUMENT_CHECK
DATA: wa_header TYPE acchd.
IF sy-xprog NE ' SAPMSSY1 '.
CLEAR wa_header.
wa_header = im_document-header.
ex_document-header-bktxt = wa_header-bktxt.
CLEAR wa_header.
ENDIF. -
Folio number not updated in the table RG23D
Hi all,
Folio number not updated in the table RG23D when I create depot excise invoice using batch program J_1IJCHK. Can any one help me by providing rootcause and solution.
Thanks in advance.
Regards
BalajiSee can i know in which version u r working,Because if u r in 4.6c there will be some problem.Some patches will be there.
Try this program i have send and assign excise duty
REPORT YJ_1IJCHK MESSAGE-ID 8I.
TABLES : J_1IEXCHDR, "excise header
J_1IEXCDTL, "excise detail
J_1IRG23D , "RG23D register
J_1IWRKCUS, "Plant level customisation
J_1IREGSET, "register set customisation
J_1IEXCDEF, "Tax default information
VBFA, "sales document flow
LIKP, "delivery header
LIPS, "delivery detail
T005, "country information
KUAGV, "sold-to-party information
KUWEV, "ship-to-party information
KNA1, "customer master
VBPA, "sales document partner
TVKO, "sales organisation to company co
VBUK, "delivery information
MAKT, "material description
T001. "company code
selection-screen begin of block delivery_details no intervals.
PARAMETERS: FCODE TYPE C,
DELIVERY LIKE LIPS-VBELN,
EXCGROUP LIKE J_1IEXCHDR-EXGRP,
SERGROUP LIKE J_1IEXCHDR-SRGRP.
TYPES : BEGIN OF RG23D.
INCLUDE STRUCTURE J_1IRG23D.
TYPES: MENGR LIKE J_1IEXCDTL-MENGR, "remaining quantity
MENGA LIKE J_1IEXCDTL-MENGA, "quantity actually rec
ADDBED LIKE J_1IEXCDTL-ADDBED,
ADDSED LIKE J_1IEXCDTL-ADDSED,
ADDAED LIKE J_1IEXCDTL-ADDAED,
END OF RG23D.
DATA : BEGIN OF J1IJ300,
BUKRS LIKE TVKO-BUKRS,
WERKS LIKE LIPS-WERKS,
REGID LIKE J_1IREGSET-J_1IREGID,
WAERS LIKE T001-WAERS,
SHIPFROM_IND TYPE C, " Added 10/12/1998
RG23D_SERIALNO TYPE C, " Added 10/12/1998
END OF J1IJ300.
DATA : TRNTYP(4) TYPE C,
CONDT-NAME(3) TYPE C,
TOTAL_LRG23D LIKE LIPS-LFIMG,
ALLOC_LRG23D LIKE LIPS-LFIMG,
SHIPFROM_IND LIKE J_1IEXCHDR-STATUS,
RG23D_SERIALNO LIKE J_1IEXCHDR-STATUS.
DATA : BEGIN OF XLIPS OCCURS 10,
internal table to store the delivery item information
VBELN LIKE LIPS-VBELN,
POSNR LIKE LIPS-POSNR,
MATNR LIKE LIPS-MATNR,
MAKTX LIKE MAKT-MAKTX,
WERKS LIKE LIPS-WERKS,
LGORT LIKE LIPS-LGORT,
CHARG LIKE LIPS-CHARG,
LFIMG LIKE LIPS-LFIMG,
MEINS LIKE LIPS-MEINS,
BED LIKE J_1IRG23D-EXBED,
SED LIKE J_1IRG23D-EXSED,
AED LIKE J_1IRG23D-EXAED,
CUR LIKE J_1IRG23D-EXCUR,
SELFLAG TYPE C , "T=excise invoice selected
INDEX LIKE SY-TABIX, "index in the table
FLG TYPE C. "item selection
DATA : END OF XLIPS.
DATA : CRG23D TYPE RG23D OCCURS 30 WITH HEADER LINE.
contains all rg23d entries for the document
DATA : LRG23D TYPE RG23D OCCURS 30 WITH HEADER LINE.
contains item rg23d entries
DATA : BEGIN OF Z_1IRG23D OCCURS 30.
stores the data to be updated
INCLUDE STRUCTURE J_1IRG23D.
DATA : END OF Z_1IRG23D.
DATA : BEGIN OF EXCINV OCCURS 30.
factory inovoics selected for item
INCLUDE STRUCTURE J_1IEXCDTL.
DATA : END OF EXCINV.
DATA : BEGIN OF ASSIGNED_EXCINV OCCURS 30.
INCLUDE STRUCTURE J_1IEXCDTL.
DATA : END OF ASSIGNED_EXCINV.
DATA : A_INDEX LIKE SYST-TABIX.
DATA : BEGIN OF LOCK_TABLE OCCURS 10,
table containing plant-material combination and status of the lock
WERKS LIKE J_1IEXCDTL-WERKS,
MATNR LIKE J_1IEXCDTL-MATNR,
STATUS TYPE C, "LOCKED/UNLOCKED
END OF LOCK_TABLE.
DATA : BEGIN OF LOCKTAB OCCURS 0,
TRNTYP LIKE J_1IEXCDTL-TRNTYP,
DOCNO LIKE J_1IEXCDTL-DOCNO,
DOCYR LIKE J_1IEXCDTL-DOCYR,
ZEILE LIKE J_1IEXCDTL-ZEILE,
END OF LOCKTAB.
DATA :
CRG23D-CTR TYPE I, "Line count of crg23d table
SHIPFROM LIKE J_1IRG23D-SHIPFROM,
FOLIO LIKE J_1IRG23D-FOLIO,
SERIALNO LIKE J_1IRG23D-SERIALNO,
DEPEXNUM LIKE J_1IRG23D-DEPEXNUM,
DEPEXYEAR LIKE J_1IRG23D-DEPEXYEAR.
CONSTANTS :
BED LIKE CONDT-NAME VALUE 'BED',
AED LIKE CONDT-NAME VALUE 'AED',
SED LIKE CONDT-NAME VALUE 'SED',
CES LIKE CONDT-NAME VALUE 'CES',
LOCKED TYPE C VALUE '1',
UNLOCKED TYPE C VALUE '2'.
AT SELECTION-SCREEN.
PERFORM CHECK_VBELN_INPUT.
IF FCODE = 'S'.
PERFORM DELIVERY_START_USER_EXIT.
PERFORM READ_DELIVERY_HEADER.
PERFORM GET_COMP_CODE.
PERFORM READ_CUSTOMISATION.
PERFORM GET_ITEM_INFO.
PERFORM LOCKING.
PERFORM RG23D_SELECTION.
PERFORM SAVE_DOCUMENT.
MESSAGE I000 WITH 'Selection Complete for Delivery ' DELIVERY.
ELSEIF FCODE = 'V'.
PERFORM GET_COMP_CODE.
PERFORM READ_CUSTOMISATION.
PERFORM GET_ITEM_INFO.
PERFORM LOCKING.
PERFORM UPDATE_DOCUMENT.
MESSAGE I000 WITH 'Verfiy/Post Complete for Delivery ' DELIVERY.
ENDIF.
FORM CHECK_VBELN_INPUT.
Validate Function Code
IF NOT ( FCODE = 'S' OR FCODE = 'V' ).
MESSAGE E000 WITH 'Valid Functions are S/V - Select/Verify Post'.
ENDIF.
IF DELIVERY IS INITIAL.
MESSAGE E000 WITH 'Delivery number cannot be initial'.
ENDIF.
check if goods issue done for the delivery
SELECT SINGLE WBSTK INTO VBUK-WBSTK
FROM VBUK
WHERE VBELN = DELIVERY.
IF SY-SUBRC = 0.
IF VBUK-WBSTK <> 'C' AND FCODE = 'V'.
MESSAGE W339 WITH DELIVERY.
ENDIF.
ELSE.
MESSAGE E000 WITH 'Invalid Delivery'.
ENDIF.
if in select mode check if excise invoice already selected for delive
SELECT SINGLE * FROM J_1IRG23D
WHERE VBELN = DELIVERY.
IF FCODE = 'S'.
IF SY-SUBRC = 0.
MESSAGE E325 WITH DELIVERY.
ENDIF.
ELSEIF FCODE = 'V'.
IF SY-SUBRC NE 0.
MESSAGE E000 WITH 'Selection not over for ' DELIVERY.
ELSEIF J_1IRG23D-STATUS = 'P'.
MESSAGE E000 WITH 'Record Already Posted '.
ENDIF.
ENDIF.
CLEAR J_1IRG23D.
ENDFORM. " CHECK_VBELN_INPUT
FORM READ_DELIVERY_HEADER.
SELECT SINGLE * FROM LIKP
WHERE VBELN = DELIVERY.
get the sold-to-party
CLEAR: KUAGV, KUWEV.
SELECT SINGLE KUNNR NAME1 LAND1
FROM KNA1 INTO (KUAGV-KUNNR,KUAGV-NAME1,KUAGV-LAND1)
WHERE KUNNR = LIKP-KUNAG.
get the ship-to-party
SELECT SINGLE KUNNR LAND1 NAME1
FROM KNA1 INTO (KUWEV-KUNNR,KUWEV-LAND1,KUWEV-NAME1)
WHERE KUNNR = LIKP-KUNNR.
ENDFORM. " READ_DELIVERY_HEADER
FORM GET_COMP_CODE.
get the company code of the document from the sales organisation
CLEAR TVKO-BUKRS.
SELECT SINGLE BUKRS FROM TVKO INTO TVKO-BUKRS
WHERE VKORG = LIKP-VKORG.
J1IJ300-BUKRS = TVKO-BUKRS.
SELECT SINGLE WAERS FROM T001 INTO J1IJ300-WAERS
WHERE BUKRS = J1IJ300-BUKRS.
ENDFORM. " GET_COMP_CODE
FORM READ_CUSTOMISATION.
SELECT SINGLE WERKS INTO J1IJ300-WERKS
FROM LIPS
WHERE VBELN = DELIVERY.
Plant level customisation
SELECT SINGLE * FROM J_1IWRKCUS
WHERE J_1IWERKS = J1IJ300-WERKS .
IF SY-SUBRC <> 0.
MESSAGE E303 WITH 'plant' J1IJ300-WERKS 'J_1IWRKCUS'.
ENDIF.
IF J_1IWRKCUS-J_1IDEPOT IS INITIAL.
plant is defined as factory
MESSAGE E322 WITH J1IJ300-WERKS.
ENDIF.
J1IJ300-REGID = J_1IWRKCUS-J_1IREGID.
TRNTYP = 'DLDO'.
SELECT SINGLE * FROM J_1IREGSET
WHERE J_1IREGID = J1IJ300-REGID.
IF SY-SUBRC <> 0.
MESSAGE E303 WITH 'Register id' J1IJ300-REGID 'J_1IREGSET'.
ENDIF.
ENDFORM. " READ_CUSTOMISATION
*& Form GET_ITEM_INFO
text *
--> p1 text
<-- p2 text
FORM GET_ITEM_INFO.
REFRESH : CRG23D, LRG23D, EXCINV, XLIPS.
PERFORM READ_DELIVERY_ITEM.
ENDFORM. " GET_ITEM_INFO
*& Form READ_DELIVERY_ITEM
text *
--> p1 text
<-- p2 text
FORM READ_DELIVERY_ITEM.
DATA : CNT LIKE SY-TABIX.
CLEAR CNT.
REFRESH XLIPS.
SELECT * FROM LIPS
WHERE VBELN = DELIVERY.
read the delivery item
perform plant checking only if in create mode
IF LIPS-WERKS <> J1IJ300-WERKS.
plant is different from that of the first item
SELECT SINGLE J_1IREGID INTO J_1IWRKCUS-J_1IREGID
FROM J_1IWRKCUS
WHERE J_1IWERKS = LIPS-WERKS.
IF SY-SUBRC <> 0.
MESSAGE E303 WITH 'plant' LIPS-WERKS 'J_1IWRKCUS'.
ENDIF.
IF J_1IWRKCUS-J_1IREGID <> J1IJ300-REGID.
register id of the two plants are different
MESSAGE E338 WITH DELIVERY.
ENDIF.
ENDIF.
CLEAR XLIPS.
store the item details
XLIPS-VBELN = LIPS-VBELN.
XLIPS-POSNR = LIPS-POSNR.
XLIPS-MATNR = LIPS-MATNR.
PERFORM GET_MATERIAL_DESC
USING XLIPS-MATNR
XLIPS-MAKTX.
XLIPS-WERKS = LIPS-WERKS.
XLIPS-LGORT = LIPS-LGORT.
XLIPS-CHARG = LIPS-CHARG.
XLIPS-LFIMG = LIPS-LFIMG.
XLIPS-MEINS = LIPS-VRKME. "changed 2.3.98
CLEAR : XLIPS-BED, XLIPS-SED, XLIPS-AED.
XLIPS-CUR = J1IJ300-BUKRS.
CNT = CNT + 1.
XLIPS-INDEX = CNT.
XLIPS-SELFLAG = 'F'.
APPEND XLIPS.
ENDSELECT.
ENDFORM. " READ_DELIVERY_ITEM
*& Form GET_MATERIAL_DESC
text *
--> p1 text
<-- p2 text
FORM GET_MATERIAL_DESC USING MATNR MAKTX.
SELECT SINGLE MAKTX FROM MAKT INTO MAKTX
WHERE MATNR = MATNR
AND SPRAS = 'E' .
ENDFORM. " GET_MATERIAL_DESC
*& Form LOCKING
text *
--> p1 text
<-- p2 text
FORM LOCKING.
REFRESH LOCK_TABLE.
LOOP AT XLIPS.
LOCK_TABLE-WERKS = XLIPS-WERKS.
LOCK_TABLE-MATNR = XLIPS-MATNR.
LOCK_TABLE-STATUS = UNLOCKED.
COLLECT LOCK_TABLE.
ENDLOOP.
PERFORM LOCK_UNLOCK_PLANT_MATERIAL USING LOCKED.
SELECT TRNTYP DOCNO DOCYR ZEILE INTO
(LOCKTAB-TRNTYP,
LOCKTAB-DOCNO,LOCKTAB-DOCYR,
LOCKTAB-ZEILE)
FROM J_1IEXCDTL
WHERE TRNTYP = 'GRPO'
AND WERKS = XLIPS-WERKS
AND LGORT = XLIPS-LGORT
AND MATNR = XLIPS-MATNR
AND CHARG = XLIPS-CHARG.
APPEND LOCKTAB.
ENDSELECT.
*share lock for all excise invoices
LOOP AT LOCKTAB.
CALL FUNCTION 'ENQUEUE_EJ_1IEXDTL'
EXPORTING
MODE_J_1IEXCDTL = 'S'
MANDT = SY-MANDT
TRNTYP = LOCKTAB-TRNTYP
DOCYR = LOCKTAB-DOCYR
DOCNO = LOCKTAB-DOCNO
ZEILE = LOCKTAB-ZEILE
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3.
ENDLOOP.
ENDFORM. " LOCKING
*& Form LOCK_UNLOCK_PLANT_MATERIAL
text *
--> p1 text
<-- p2 text
FORM LOCK_UNLOCK_PLANT_MATERIAL USING ACTION.
DATA: __UNAME LIKE SY-UNAME,
__OBJECT LIKE DD25V-VIEWNAME.
DATA : BEGIN OF LOCK_STRUCT,
GRANNAME(10) VALUE 'J1IJ',
ENQMODE VALUE 'E',
MANDT LIKE SY-MANDT,
WERKS LIKE J_1IEXCDTL-WERKS,
MATNR LIKE J_1IEXCDTL-MATNR,
END OF LOCK_STRUCT.
LOCK_STRUCT-MANDT = SY-MANDT.
LOOP AT LOCK_TABLE WHERE STATUS <> ACTION.
perform the locking/unlocking operation only for the items for which
it is not already done
LOCK_STRUCT-WERKS = LOCK_TABLE-WERKS.
LOCK_STRUCT-MATNR = LOCK_TABLE-MATNR.
CALL 'C_ENQUEUE'
ID 'OPCODE' FIELD ACTION
ID 'ENQOBJ' FIELD 'J_1IJ'
ID '01' FIELD LOCK_STRUCT
ID 'COLLISION_UNAME' FIELD __UNAME
ID 'COLLISION_OBJECT' FIELD __OBJECT.
CASE SY-SUBRC.
WHEN 0.
LOCK_TABLE-STATUS = ACTION.
MODIFY LOCK_TABLE.
WHEN 2.
MESSAGE E341 WITH LOCK_TABLE-WERKS LOCK_TABLE-MATNR __UNAME.
WHEN OTHERS.
IF ACTION = LOCKED.
MESSAGE E342 WITH 'locking'
LOCK_TABLE-WERKS LOCK_TABLE-MATNR.
ELSE.
MESSAGE E342 WITH 'unlocking'
LOCK_TABLE-WERKS LOCK_TABLE-MATNR.
ENDIF.
ENDCASE.
ENDLOOP.
ENDFORM. " LOCK_UNLOCK_PLANT_MATERIAL
*& Form RG23D_SELECTION
text *
--> p1 text
<-- p2 text
FORM RG23D_SELECTION.
REFRESH CRG23D.
REFRESH ASSIGNED_EXCINV.
LOOP AT XLIPS.
*write: / xlips-vbeln,xlips-posnr,xlips-matnr, xlips-meins, xlips-lfimg.
REFRESH EXCINV.
CALL FUNCTION 'J_1I6_SELECT_EXCISE_INVOICE_DE'
EXPORTING
BUKRS = J1IJ300-BUKRS
CHARG = XLIPS-CHARG
WERKS = XLIPS-WERKS
EXGRP = EXCGROUP
MATNR = XLIPS-MATNR
QTY_CHECK = 'X'
MULTI = 'X'
NO_DAY_CHECK = 'X'
SHIPFROM = SHIPFROM
LGORT = XLIPS-LGORT
TABLES
EXC_TAB = EXCINV
EXCEPTIONS
OTHERS = 1.
TOTAL_LRG23D = 0.
ALLOC_LRG23D = 0.
SORT EXCINV BY DOCYR DOCNO .
LOOP AT ASSIGNED_EXCINV.
READ TABLE EXCINV WITH KEY DOCYR = ASSIGNED_EXCINV-DOCYR
DOCNO = ASSIGNED_EXCINV-DOCNO
ZEILE = ASSIGNED_EXCINV-ZEILE
BINARY SEARCH.
IF SY-SUBRC = 0.
A_INDEX = SY-TABIX.
EXCINV-MENGR = EXCINV-MENGR - ASSIGNED_EXCINV-MENGR.
MODIFY EXCINV INDEX A_INDEX .
ENDIF.
ENDLOOP.
DELETE EXCINV WHERE MENGR = 0.
total_lrg23d = total balance quantity in the selected excise invoices
alloc_lrg23d = Quantity allocated to a delivery line item,
Allocation continues till
- We have balance quantity in excise invoice selection
- Till total delivery quantity is allocated
LOOP AT EXCINV.
To Force the same shipfrom for all the excise invoices
Shipfrom Ind can be determined in the start user-exit
IF J1IJ300-SHIPFROM_IND = 'Y'.
IF XLIPS-INDEX = 1 AND SY-TABIX = 1.
SHIPFROM = EXCINV-SHIPFROM.
ENDIF.
IF SHIPFROM NE EXCINV-SHIPFROM.
EXCINV-RIND3 = 'X'.
MODIFY EXCINV.
CONTINUE.
ENDIF.
ENDIF.
Allocation
IF XLIPS-LFIMG NE ALLOC_LRG23D.
TOTAL_LRG23D = TOTAL_LRG23D + EXCINV-MENGR.
IF XLIPS-LFIMG > TOTAL_LRG23D.
ALLOC_LRG23D = ALLOC_LRG23D + EXCINV-MENGR.
ELSE.
EXCINV-MENGR = XLIPS-LFIMG - ALLOC_LRG23D.
ALLOC_LRG23D = ALLOC_LRG23D + EXCINV-MENGR.
ENDIF.
ELSE.
EXCINV-RIND3 = 'X'.
ENDIF.
MODIFY EXCINV.
ENDLOOP.
DELETE EXCINV WHERE RIND3 = 'X'.
LOOP AT EXCINV.
MOVE-CORRESPONDING EXCINV TO ASSIGNED_EXCINV.
APPEND ASSIGNED_EXCINV.
CLEAR ASSIGNED_EXCINV.
ENDLOOP.
IF TOTAL_LRG23D < XLIPS-LFIMG.
MESSAGE E000 WITH 'Not enough balance in RG23D ......'.
ENDIF.
Collect all allocated excise invoices to crg23d table
LOOP AT EXCINV.
PERFORM FILL_CRG23D.
APPEND CRG23D.
ENDLOOP.
ENDLOOP.
ENDFORM. " RG23D_SELECTION
*& Form SAVE_DOCUMENT
text *
--> p1 text
<-- p2 text
FORM SAVE_DOCUMENT.
PERFORM PREPARE_RG23D_DATA.
Generate RG23D serial number and Excise Invoice Serial Number
IF J1IJ300-RG23D_SERIALNO = 'Y'.
PERFORM GENERATE_RG23D_SERIAL ON COMMIT.
ENDIF.
PERFORM GENERATE_EXCISE_INV_SERIAL ON COMMIT.
CALL FUNCTION 'J_1I7_USEREXIT_DEPOT_BEF_SAVE'
TABLES
RG23D = Z_1IRG23D
EXCEPTIONS
OTHERS = 1.
PERFORM UPDATE_RG23D ON COMMIT.
PERFORM UPDATE_EXCDTL ON COMMIT.
COMMIT WORK.
PERFORM LOCK_UNLOCK_PLANT_MATERIAL USING UNLOCKED.
PERFORM UNLOCKING.
MESSAGE S333 WITH DELIVERY.
ENDFORM. " SAVE_DOCUMENT
*& Form PREPARE_RG23D_DATA
text *
--> p1 text
<-- p2 text
FORM PREPARE_RG23D_DATA.
REFRESH Z_1IRG23D.
LOOP AT CRG23D WHERE MENGE <> 0.
CLEAR Z_1IRG23D.
Z_1IRG23D = CRG23D.
Z_1IRG23D-USNAM = SY-UNAME.
Z_1IRG23D-CPUDT = SY-DATUM.
Z_1IRG23D-EXGRP = EXCGROUP.
Z_1IRG23D-SRGRP = SERGROUP.
APPEND Z_1IRG23D.
IF CRG23D-ADDAED <> 0 OR CRG23D-ADDSED <> 0 OR CRG23D-ADDAED <> 0 .
additional excise is applicable
make quantity zero for A certificate entries
CLEAR : Z_1IRG23D-MENGE.
get all the A certificates for the excise document item
SELECT * FROM J_1IEXCDTL
TODO : add the transaction type to the selection procedure
WHERE RDOC1 = CRG23D-DOCNO
AND RYEAR1 = CRG23D-DOCYR
AND RITEM1 = CRG23D-ZEILE
AND RIND1 = 'G'.
get the A certificate number
SELECT SINGLE
EXNUM EXYEAR INTO (Z_1IRG23D-EXNUM, Z_1IRG23D-EXYEAR)
FROM J_1IEXCHDR
WHERE TRNTYP = J_1IEXCDTL-TRNTYP
AND DOCYR = J_1IEXCDTL-DOCYR
AND DOCNO = J_1IEXCDTL-DOCNO.
Z_1IRG23D-TRNTYP = J_1IEXCDTL-TRNTYP.
Z_1IRG23D-DOCYR = J_1IEXCDTL-DOCYR.
Z_1IRG23D-DOCNO = J_1IEXCDTL-DOCNO.
Z_1IRG23D-ZEILE = J_1IEXCDTL-ZEILE.
Z_1IRG23D-EXBED = ( J_1IEXCDTL-EXBED * CRG23D-MENGE )
/ CRG23D-MENGA.
Z_1IRG23D-EXSED = ( J_1IEXCDTL-EXSED * CRG23D-MENGE )
/ CRG23D-MENGA.
Z_1IRG23D-EXAED = ( J_1IEXCDTL-EXAED * CRG23D-MENGE )
/ CRG23D-MENGA.
Z_1IRG23D-RG23ASER = J_1IEXCDTL-RG23ASER.
Z_1IRG23D-RG23CSER = J_1IEXCDTL-RG23CSER.
Z_1IRG23D-RGPLASER = J_1IEXCDTL-RGPLASER.
APPEND Z_1IRG23D.
ENDSELECT.
ENDIF.
ENDLOOP.
ENDFORM. " PREPARE_RG23D_DATA
*& Form UPDATE_RG23D
text *
--> p1 text
<-- p2 text
FORM UPDATE_RG23D.
*update the rg23d register
INSERT J_1IRG23D FROM TABLE Z_1IRG23D ACCEPTING DUPLICATE KEYS.
IF SY-SUBRC <> 0.
MESSAGE A308 WITH 'J_1IRG23D'.
ENDIF.
ENDFORM. " UPDATE_RG23D
*& Form UPDATE_EXCDTL
text *
--> p1 text
<-- p2 text
FORM UPDATE_EXCDTL.
LOOP AT CRG23D WHERE MENGE <> 0.
update the remaining quantity in the excise invoice item tables
UPDATE J_1IEXCDTL
SET MENGR = MENGR - CRG23D-MENGE
AENAM = SY-UNAME
AEDAT = SY-DATUM
WHERE TRNTYP = 'GRPO'
AND DOCYR = CRG23D-DOCYR
AND DOCNO = CRG23D-DOCNO
AND ZEILE = CRG23D-ZEILE.
IF SY-SUBRC <> 0.
MESSAGE A308 WITH 'J_1IRG23D'.
ENDIF.
ENDLOOP.
ENDFORM. " UPDATE_EXCDTL
*& Form FILL_CRG23D
text *
--> p1 text
<-- p2 text
FORM FILL_CRG23D.
CRG23D-TRNTYP = EXCINV-TRNTYP.
CRG23D-DOCYR = EXCINV-DOCYR.
CRG23D-DOCNO = EXCINV-DOCNO.
CRG23D-ZEILE = EXCINV-ZEILE.
CRG23D-VBELN = XLIPS-VBELN.
CRG23D-POSNR = XLIPS-POSNR.
CRG23D-EXNUM = EXCINV-EXNUM.
CRG23D-EXYEAR = EXCINV-EXYEAR.
CRG23D-LIFNR = EXCINV-LIFNR.
CRG23D-MATNR = EXCINV-MATNR.
CRG23D-MAKTX = EXCINV-MAKTX.
CRG23D-CHAPID = EXCINV-CHAPID.
CRG23D-MEINS = EXCINV-MENGR_UOM.
CRG23D-WERKS = EXCINV-WERKS.
CRG23D-EXCUR = EXCINV-EXCUR.
CRG23D-RG23ASER = EXCINV-RG23ASER.
CRG23D-RG23CSER = EXCINV-RG23CSER.
CRG23D-RGPLASER = EXCINV-RGPLASER.
CRG23D-MENGR = EXCINV-MENGR.
CRG23D-MENGA = EXCINV-MENGA.
CRG23D-MENGE = EXCINV-MENGR. " Move the allocated Qty
CRG23D-EXBED = ( EXCINV-EXBED * CRG23D-MENGE ) / EXCINV-MENGA.
CRG23D-EXSED = ( EXCINV-EXSED * CRG23D-MENGE ) / EXCINV-MENGA.
CRG23D-EXAED = ( EXCINV-EXAED * CRG23D-MENGE ) / EXCINV-MENGA.
ENDFORM. " FILL_CRG23D
*& Form UPDATE_DOCUMENT
text *
--> p1 text
<-- p2 text
FORM UPDATE_DOCUMENT.
LOOP AT XLIPS.
UPDATE J_1IRG23D SET STATUS = 'P'
WHERE VBELN = XLIPS-VBELN
AND POSNR = XLIPS-POSNR.
ENDLOOP.
COMMIT WORK.
ENDFORM. " UPDATE_DOCUMENT
*& Form DELIVERY_START_USER_EXIT
text *
--> p1 text
<-- p2 text
FORM DELIVERY_START_USER_EXIT.
CALL FUNCTION 'J_1I7_USEREXIT_EXGRP_DETERM'
EXPORTING
EXCGRP = EXCGROUP
MBLNR =
MJAHR =
VENDOR =
VBELN = DELIVERY
IMPORTING
EXCGRP = EXCGROUP
SHIPFROM_IND = J1IJ300-SHIPFROM_IND
RG23D_SERIALNO = J1IJ300-RG23D_SERIALNO
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'J_1I7_USEREXIT_SERGRP_DETERM'
EXPORTING
SRGRP = SERGROUP
MBLNR =
MJAHR =
VBELN = DELIVERY
IMPORTING
SRGRP = SERGROUP
EXCEPTIONS
OTHERS = 1.
ENDFORM. " DELIVERY_START_USER_EXIT
*& Form GENERATE_RG23D_SERIAL
text *
--> p1 text
<-- p2 text
FORM GENERATE_RG23D_SERIAL.
LOOP AT Z_1IRG23D WHERE MENGE <> 0.
CLEAR: FOLIO, SERIALNO.
SELECT MAX( FOLIO ) MAX( SERIALNO )
INTO (Z_1IRG23D-FOLIO, Z_1IRG23D-SERIALNO)
FROM J_1IRG23D
WHERE TRNTYP = Z_1IRG23D-TRNTYP
AND DOCNO = Z_1IRG23D-DOCNO
AND DOCYR = Z_1IRG23D-DOCYR
AND ZEILE = Z_1IRG23D-ZEILE.
MODIFY Z_1IRG23D.
ENDLOOP.
ENDFORM. " GENERATE_RG23D_SERIAL
*& Form GENERATE_EXCISE_INV_SERIAL
text *
--> p1 text
<-- p2 text
FORM GENERATE_EXCISE_INV_SERIAL.
CLEAR: DEPEXNUM, DEPEXYEAR.
CALL FUNCTION 'J_1I6_DETERMINE_EXC_YEAR'
EXPORTING
I_BUKRS = J1IJ300-BUKRS
IMPORTING
EXCISE_YEAR = DEPEXYEAR
EXCEPTIONS
MISS_COMPANY = 1
OTHERS = 2.
IF SY-SUBRC NE 0.
MESSAGE E526 WITH 'Company ' J1IJ300-BUKRS.
ENDIF.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
NR_RANGE_NR = '01'
OBJECT = 'J_1IDEPINV'
QUANTITY = '1'
SUBOBJECT = SERGROUP
TOYEAR = DEPEXYEAR
IMPORTING
NUMBER = DEPEXNUM
EXCEPTIONS
INTERVAL_NOT_FOUND = 1
NUMBER_RANGE_NOT_INTERN = 2
OBJECT_NOT_FOUND = 3
QUANTITY_IS_0 = 4
QUANTITY_IS_NOT_1 = 5
INTERVAL_OVERFLOW = 6
OTHERS = 7.
CASE SY-SUBRC.
WHEN 0.
WHEN 1.
MESSAGE A336 WITH 'internal document' ': Interval not found'
'. Number object : J_1IDEPINV'.
WHEN 3.
MESSAGE A336 WITH 'internal document' ': Object not found'
'. Number object : J_1IDEPINV'.
WHEN OTHERS.
MESSAGE A336 WITH 'internal document'
'. Number object : J_1IDEPINV'.
ENDCASE.
Update Depot Excise Invoice Year and Number in the table
LOOP AT Z_1IRG23D.
Z_1IRG23D-SERIALNO = Z_1IRG23D-SERIALNO + 1.
Z_1IRG23D-DEPEXYEAR = DEPEXYEAR.
Z_1IRG23D-DEPEXNUM = DEPEXNUM.
MODIFY Z_1IRG23D.
ENDLOOP.
ENDFORM. " GENERATE_EXCISE_INV_SERIAL
*& Form UNLOCKING
text
--> p1 text
<-- p2 text
FORM UNLOCKING.
LOOP AT LOCKTAB.
CALL FUNCTION 'DEQUEUE_EJ_1IEXDTL'
EXPORTING
MODE_J_1IEXCDTL = 'S'
MANDT = SY-MANDT
TRNTYP = LOCKTAB-TRNTYP
DOCYR = LOCKTAB-DOCYR
DOCNO = LOCKTAB-DOCNO
ZEILE = LOCKTAB-ZEILE.
ENDLOOP.
ENDFORM. " UNLOCKING -
Hi. My itunes library is in current 10.5.2 but my old ipod touch 4th or 3rd gen is not updating at all its still in current 4.2 and there is some apps i cant download that requires a 4.3 update but in my itunes it wont. Please help!
Are you sure you have a 4g/3g iPod? If you don't have a camera, it's definitely not 4G. If it has no camera and is 8 or 16 Gb it is a 2G and can't go beyond 4.2.1.
-
Hi,
I have created an append on the tables RBKP_V and RBKP.
I am parking a vendor invoice in transaction MIR7.
I'm using the BADI BADI_FDCB_SUBBAS04 to enhance MIR7 transaction. I have followed the BADI documentation.
When I click on 'Save as completed' button :
The customer fields are not updated in the table RBKP.
Whats the solution ?
Best Regards,
Ramesh.SHi, In my opinion, some of Custom fields should move to corresponding field in user exit to update to table.
Example . you have add a field that zzabb into vbak , you should add code like move struct-zzabb to xvbak-zzabb.
**"struct" is from screen field you be inputed -
Reference field is not updating in VBAK table
Hi Experts,
I am using SD_SALESDOCUMENT_CREATE bapi for Credit Memo Creation .
but the field XBLNR is not updating in the table vbak.
Kindly help me to sort out this issue.
Thanks in advance.
In which field i should pass the value to update in the table vbak.
Regards,
Ajay.
Edited by: srinivasan12345 on Nov 14, 2011 9:21 AMHi,
follow this,may help u..
Re: Credit Memo Creation
thanks & regards. -
No. of containers not updating in QALS table from goods receipt
Hi all,
I am working on below requirement for client.
I am releasing a process order and then saving it. With this, an inspection lot is created in QALS table automatically.
Then I am doing Goods receipt through MIGO.
While doing goods receipt, I am entering no. of containers in quantity tab on item level (GOITEM-ANZGEB), but the same is not getting updated in QALS table (QALS-ANZGEB).
Is there any configuration setting needs to be done to activate the update of no. of containers in QALS table from MIGO transaction?
P.S. - Sometimes we use MB31 also to do goods receipt. In that also, there is no. of containers field.
Thanks in advance,
SachinHi Sachin,
what is the solution for this .? Can you explain?
Ram -
Data is not updating in DB Table
Hi...All
we have done the RFC-JDBC Synchronous scenario, we are getting the success messages into SXMB_MONI ,in the CCM also it was showing success. but data is not updating in to the Database Table. client want to see the response data in the Database Table only.
pls help me this is very urgent.
Regards,
Pasi.Hi,
If everything is working fine in XI there is some problem in database end only while query gets executed. Try debuging the sql query which you have by giving log statement and see what the query generated is.
Got to your receiver jdbc communication chalnnel , Advance mode > Additional parameters,
Enter logSQLStatement in the name column and true in the value column
To view the SQL log Click on the message ID of the communication channel monitoring.
or, alternatively, in Runtime workbench, click your message> details> audit log tab.
Run the interface once more. Check the communication channel now. It will show the actual insert statement which is trying to insert into the DB and then you can figure out what is the query being fired to database and see if it is fine.
Copy the same query and run in databse. you will be able to find the exact problem.
thanks
amit
reward point if answer is useful -
ERROR IN FILE--XI--RFC SCENARIO. BAPI did not UPDATE the DATABASE TABLE
Hi
I have created a scenario FILE -XI- RFC
File is picked by file adapter - Its working fine
I have used BPM
In RFC side i used BAPI_INCOMINGINVOICE_CREATE
Its working fine and return an Invoice Number and Fisical year .
When i Check this in the R/3 System , in Invoice no Does not Exist .
Message mapping is ok
SXMB_MONI all are ok
Receiver file i got the invoice no and fisical year .
The Problem is " DATABASE TABLE DID NOT UPDATED "
So should i do BAPI_COMMIT seperately ........
Any solution ................
VERY VERY URGENT .....
thanks in advance
B.Judehi jude,
Commit Control for Single BAPI Calls
If you want to use this communication channel to call BAPIs as remote-enabled function modules that change data in the database, set the indicator.
If executed successfully, the transaction is written to the database by calling the function module BAPI_TRANSACTION_COMMIT explicitly. If an error occurs, the transaction is rolled back by BAPI_TRANSACTION_ROLLBACK.
The result is determined by the value of the field TYPE in parameter RETURN. If successful, the tables are empty and the values , S, I, and W are displayed. All other values are regarded as errors.
To change this setting, set the indicator BAPI Advanced Mode.
<b>In the Successful RETURN-TYPE Values table, enter the values that should lead to a successful execution.</b>
Regards,
Mandeep Virk -
Withholding tax amount is not updated in with_item table
Dear all,
In our system, one vendor invoice posted through FB60. In which, system generates withholding tax lin item. The same line item shows in BSIS and WITH_ITEM tables. It also shows in GL account line item display as open item. But, in WITH_ITEM table system not calcuate tax amount and shows as nil withholding tax amount against withholding tax base amount because of this I will get error at the time of creating challan through J1INCHLN.
Please help us though there is statutatory payment due date.
Regards,
KalpikHi Raghvendra,
Thanks for reply. Why system is not update withholding tax amount only for that particular document ?
So, we can take precaution in future also.
Regards,
Kalpik
Maybe you are looking for
-
Bank charges showing open item
Hi Experts, I created bank charges g/l account without switched on the open item management because of bank charges are the P/L account. while i uploaded the balances in FF67 for reconsilation and when i go to FBL3N for g/l account line items despaly
-
Ps file saved as PDF on mac - opened on PC changes all colors to something different
i made a PDF from my ps file in photoshop. I sent it to a printer. he gave me the proof and it was not the same color i had. he stated he couldnt change it because he is on a PC and the file i sent him when he opens in in PS switches to a bitmap. and
-
Re-Calculate PO conditions during MIGO
We need to re-calculate PO condition base on changed excise duty at the time of MIGO. Is there any function module or user exit through which we can recalculate PO condition GR ?
-
Importing keywords from external database
I have a simple request that seems to be impossible. Back in the days before LIghtroom, I had a database that identified most of my images, cross-referenced to their filename. Rather than manually keyword these thousands of images, I would like to i
-
Bug in ODT 11720 - indexed columns list in Design Table is disabled
Start VS2008 Server Explorer Expand any oracle db Expand Tables Design any existing table that has an existing index that indexes more than 3 columns Click Indexes tab Click the index name Try to scroll the list of indexed columns, because youre curi