Equium A100-027 PSAAQ - having problems accessing Internet with WLan

Just installed WXP on my Equium A100-027 (PSAAQ) as Vista did not like. Now am having problems accessing Internet. What drivers do I need to download and how do I install them?
Thanks.

Hi,
I would suggest you to check the driver site of toshiba
-> http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
search for your machine and download the wlan drivers. If you dont know which one you need just download all of them and install em, one of that drivers MUST work. ;)
Greets

Similar Messages

  • Having trouble accessing internet with new wireless WRT54...

    Having trouble accessing internet with new wireless WRT54G. Used easylink to read existing router BEFSR41 which works great to westell modem provided by Verizon. When connect new router Easylink configures WRT54G but when trying to connect to internet...fails. All lites indicate good. Not using wireless device yet, just the wired ethernet. Router set up as DHCP.
    I keep going back to old router and works great every time. Help! 

    Thanks for response, however I tried setting unit to 192.168.2.1 (leaving DHCP) to no avail. I put my old unit (BEFSR41) back in and I'm back up. I need to sit back and decide which way to go on this. Perhaps it's defective and I should return it.

  • Is anyone having problems accessing WIFI with their iPhone

    Just noticed that yesterday I can't access WIFI with my iPhone 5s.  Happened at my office and at home.  WIFI works both places as Macbook works.  Anyone else finding this ?

        I don't wnat you to have any issues with your device, tracybayne! Let's get to work to make sure we get you up and running. Have you been able to try to reset the network settings in your phone? The best way to do that is to go into Settings, General, Reset, Reset Network Settings. The phone will power cycle and then you will need to re-type in all the wi-fi passwords again. Once that is done, please re-test it out. Keep us posted.
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • HT1222 Is anyone having problems accessing server with iPhone 4S once updated to iOS7?

    I can't reach the server now that I've updated my iPhone 4S to iOS 7. Interestingly, I am using my iPad 2, which was updated at the same time, to post this! Anyone else having server issues with updates...and, in particular, updates of iPhone 4Ss and iOS7? Thank you!

    Yes. I had an iPhone 3G and when upgraded to 6.1 the bluetooth connectivity failed progressively and eventually the phone just wouldn't connect. I broke and reestablished the pairing am few times and each time it would work for a while then disconnect to the extent I thought the bluetooth hardware in the car was failing. I then got an iPhone 5 and the same issue remained. In the last few days I've paired an old Blackberry with the car kit to rule out the BMW hardware. Blackberry is fine so it has to be iOS incompatibility.

  • Equium A100-063 PSAAQE: WLan signal interrupts

    Hi
    i'm italian so excuse me for my english.
    The 23rd of March Ive bought the Notebook EQUIUM A100-063 PSAAQE.
    Unfortunately I have found a problem that I can't resolve although numerous test I've tried.
    After some minute the connection wireless to my Router DLINK DSL-G624T falls and I must repeat the procedure of connection to Internet although the radio signal is always excellent, but after some minutes the line falls again.
    I approach without proplems with pocketpc and another notebook to the same router.
    Currently I have configured WEP key but I have tried also with WAP key, and also without key, moreover I have tried various names of SSID and to set up the IP in static mode and also in dynamic mode.
    I've verified that the version of the card Wireless driver is the last one.
    Can you help me in some way, please?

    Thanks for your answer. I've verified that the probable source of my problem is due to interference on the channel radio setting. When I've changed the channel from 6 to 11 the connection is remained stable for an hour until the problem has been repeated.
    In the same time the problem has been repeat, another Access Point has been activated on the radio channel 11 like my router, therefore I've configured my router in channel 9 and I don't have more problems.

  • Equium A100-027: Is it possible to upgrade the graphic card?

    I recently received an Equium A100-027 for my birthday. Overall I'm extremely pleased with it, however the only problem I have is with the graphics card. I am a gamer, and the graphics card just can't handle most modern games.
    I am looking into how to upgrade it, how much it will cost etc. However I don't wanna buy a graphics card just to realise that the inside is locked down. Since it's only a week old I also don't want to take a hammer to it just yet ;-)
    Can anyone tell me how hard it is to upgrade the graphics card? Is it locked down, or easily accessible?

    Hi Emonn
    Unfortunately, the graphic card upgrade is not possible. I dont know if you are familiar with the notebook technology but you should know that the graphic cards installed on the notebook motherboards are not same like the GPUs for desktop PCs.
    The card a fixed and there is no way for an upgrade!!!
    You can upgrade the memory modules or the HDD on the notebooks but not the graphic card!!!
    Im also an gamer and Im a notebook owner but I dont use this unit for gaming but for usual usage like internet, programming, mps, etc
    I have a second gaming machine and its a desktop PC. Its support a water cooling module and a really great graphic card but I will change it to the newest one NVIDIA which supports the directX10.
    This is a future and all newest games will need this DrectX10!!!

  • Low Battery/Critical Battery Alarm on Equium A100-027

    I have bought an Equium A100-027 running on Vista Home Premium this Feb. Since then I have installed quite some software, eg Nokia phone software, bluetooth drivers, A-Virus & all MS updates.
    When the battery gets low or critical I don't get any audio warning, despite having this option ticked in the Advanced Settings of the Power Options and using the Win default sound scheme.
    The soundcard & speakers definitely work as I get the Win sound notifications and can play CDs, etc.
    Is there a driver/software that can be re-installed to get this working again as System restore would only let me go back a month.
    Thanks for any help,
    Markus

    Hi,
    I saw your post before and I understand you need some help.
    I can just give you the following suggestion:
    - Update to the latest bios version ! (Check this site out:http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_bios.jsp?service=EU&mode=allMachines)
    - Recover your machine and update ALL drivers/tools/etc., but before installing some "foreign" software, check if the "beeping" works correctly (For that stuff go here:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp)
    - Install your other software (Nokia manager, etc...) and check after every newly installed software if it still works. If after installing a specific software the "beep" doesnt work anymore then you know where the problem lays and you did some good software troubleshooting. ;)
    In case of any questions: Just post :)
    Greets

  • Equium A100-027: Toshiba Power Saver Utility

    I have a Toshiba Equium A100-027 laptop and the fan goes on every couple of minutes after it has been on for 15 minutes and it is highly annoying.
    I was told I could change the Cooling Method so that fan goes on less or constant but I can't seem to run the Power Saver Utility.
    I uninstalled the Value Pack that came with the laptop and long with some other Toshiba programs but I installed it again from the website but I cannot find the Power Saver Utility. It is not in Control Panel. I see a folder with the files in on Program files but whenever I try and open it, it wont load anything.
    Why is this?
    Can I run the Power Saver Utility on the A100-027 or is it not compatible or something?
    I would have thought it should work on all Toshiba Laptops.
    I can do a recovery and try it but I don't know if it will work or not?
    If it works, whats the best option so the fan is either on much less or is on constantly at a lower speed?
    I am sending the laptop to Toshiba to look at because I hear an audio glitch/crackling/fuzzing when I play music and the fan goes on and off and I think this must be some kind of small glitch to be fixed but I don't know if they can fix it. If they don't fix it, can they replace it?

    There are no BIOS updates for my Laptop Model.
    I have done a system recovery using the recovery disk and the audio glitch/crackling/fuzz persists and the fan runs at the same rate.
    The laptop will be with Toshiba Engineers on Monday but I don't know if they will hear or notice the problem or if they do if they will fix it.
    I hope they can either fix it or replace the laptop for me.

  • Having problem accessing MacMini over network with PC's Windows 7

    Hi all,
    I have a Mac Mini with 10.6.x
    Onec in a while, especially when restart Airport Extreme for upgrade or something else (both are connected with ethernet cable cat5e) ALL PC's on the network having problem accessing Mac Mini Server while All MACs are fine and can access all folders no problem. Usually takes about 3-4 min for PC to connect to server. Then  once it is connected (it loads all folder and files in that current window on the PC) i can go from folder to folder with no delays. However if i close the window with all folders then again i have to wait for around 3 min. to load everything all over again. AFP and SMB are ON. Today i made an experiment and turned SMB off and the problem still excist with the difference that after 3-4 min delay no folders were shown.
    It seems that the PCs have hard time establishing connection with the server which is weird that Macs don't have that problem. It must be something with the setting of Mac MIni. Other wise i have no problem accessing Internet so the routher is working fine. DHCP is ON on the AP Extreme.
    I came across as i was searching for this issue and it seems that authentication - Golden triangle or whatever is called - might be the issue in the whole mess. Do you guys think that this might be the case ?
    The only way i have found out to help is to restart the Router and Server and that usually fix the problem  .
    Could you please help me figure what is going on there?
    Here is the original thread: https://discussions.apple.com/thread/3867559?tstart=0 ( i think i posted in the wrong forum )

    The specified changeip -checkhostname command does not make changes to your configuration. 
    To research the command (and that's entirely your perogative), please use Google or Bing to search for previous discussions and details, or review the provided man page documentation for the command.  (Launch Terminal.app (folder Applications > Utilities) and issue the command man changeip.  You'll see something like this:
    $ man changeip
    changeip(8)               BSD System Manager's Manual              changeip(8)
    NAME
         changeip -- Change service configuration files with hard-coded IP addresses
    SYNOPSIS
         changeip [-v] [-d path] old-ip new-ip [old-hostname new-hostname]
         changeip -checkhostname
         changeip -h
    DESCRIPTION
         changeip is used to manually update configuration records when a server's IP address or hostname changed in a way that affected services were unable to properly process, for example when the server is behind a NAT device and the WAN identity changed.  ...
    Given your response and your concern, consider creating a backup of your disk.  Shut down, boot the installation DVD, and use Disk Utility (from the Utilities menu) in the second screen of the installation process to copy your disk contents to an external storage device.  (Time Machine isn't as good at getting a backup of a server as is a clean backup created while shut down.)  There are descriptions around that detail how to create this backup using Disk Utility.
    There is no DNS server implemented in the Airport Extreme.  The Airport Extreme forwards DNS requests to a DNS server elsewhere.  Few gateway devices contain DNS servers; that these devices request a DNS address tends to be confusing, too.  That address is solicited from the user for use in the DHCP server that many of the available gateway devices provide.
    There is no need for a DNS forwarder, particularly if your server is configured for your LAN.  (Adding a forwarder adds another hop into the whole translation process.  That configuration and that extra hop can be useful when the intermediate DNS server is providing specific, enhanced DNS-related functions, such as security monitoring and logging, or providing a "nanny filter" mechanism.)
    If you are running DNS services on your LAN, then your Airport Extreme DHCP server should be configured to pass out the IP address of your DNS server.
    It would appear that your local box has the default self-hosted DNS, and is not configured to serve LAN DNS (other than for itself).  That's good.  Accordingly, it'll likely be getting good DNS from itself, but will not be getting translations for other hosts on your network.  That's not so good.  When DNS responses are not available, you'll get DNS-level timeouts, and those are usually around 30 seconds each.
    Check your server logs for messages related to the failed connections, and check the Windows file service logs for any errors being generated by the file service.  The log information is most easily available from Console.app, which is a utility in Applications > Utilities folder, or from the Server Admin tool (Applications > Server folder) for DNS, and for the file server component.
    The above is probably going to read like a wall of unfamiliar jargon, so please ignore this and my previous response here, and I'll leave it to somebody else to assist you here.

  • Question about memory upgrade in a Equium A100-027

    Hi there,
    I have an Equium A100-027 notebook with 2 x 512 MB RAM installed. I'd like to add extra memory.
    I have used Crucial's (www.crucial.com) website to scan my system and recommend memory modules. According to Crucial the A100-027 will support 2 x 2 GB modules giving 4 GB in total.
    However a quick search using Google suggest I can only install 2 x 1 GB (2 GB in total) modules.
    Can anyone clarify please.
    Thanks in advance,
    Stephen

    No, guys. The machine can be upgraded up to 4GB since the chipset is able to handle 4 Gigs of RAM.
    That means you will have to place 2 x 2GB in the slots of the machine and you will have your upgaded system. :)
    One of my machines is a A100 (European - but it doesnt matter which country, chipset is worldwide the same) and Ive upgraded it to 4 Gig with kingston RAM.
    Hope I could help...
    Cheers

  • Having problems accessing any apps on my iCloud. Set up and signed in successfully but then when I click on an app it just says there's a problem but doesn't say how to fix it. Please help, am very new to this!

    Hi
    I am very new to updating my iPod touch and this is the first time I've used the iCloud. However, I am having problems accessing any apps on my iCloud such as photos, reminders etc. I've set it up on my iPod touch successfully and I can sign in on my PC. However, when I try to access any of the apps it says there was a problem. It doesn't tell me how to fix it or what the problem is.
    Is anyone able to help?

    It is working now. I no longer get the message about the item not being available in the US and I can access the store.

  • Need WXP Sound Card driver for Equium A100-027

    I recently purchased a Equium A100-027 and cannot get the sound card to work. I have WXP SP2 running on the machine and have downloaded the driver off Toshiba, but no joy.
    The laptop was originally provided with Vista but I could not get the drivers for all my devices so installed XP. When Vista was installed the sound card was working, any help much appreciated

    Try this post
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=20632

  • I am still having problems accessing java script sites.  Anyone else having this problem?

    I am still having problems accessing java script sites.  Anyone else having this problem?

    Javascript can be left on, but Java (which is something very different) should generally be turned off.
    Apple barred Java from running on Macs, leaving companies that rely on Java plug-ins out in the cold.
    Apple blocked Java 7 Update 11 by adding it to the banned list in XProtect.
    This was the second time in two weeks that Apple has blocked Oracle's code from running on Macs. This time Java is blocked through Apple's XProtect anti-malware feature.
    Java has come under fire as the means by which hackers have been able to gain control of computers. In April 2012 more than 600,000 Macs were reported to have been infected with a Flashback Trojan horse that was being installed on people's computers with the help of Java exploits. Then in August Macs were again at risk due to a flaw in Java, this time around, there was good news for Mac users: Thanks to changes Apple has made, most of us were safe from the threat.
    Unwilling to leave its customers open to potential threats Apple decided it's safer to block Java entirely.
    Macs running OS X Snow Leopard and beyond are affected.
    UPDATE for those running Lion or Mountain Lion:
    Oracle on Friday February 1 released a new version reportedly addressing vulnerabilities seen with the last build.
    Apple disabled Java 7 through the OS X XProtect anti-malware system, requiring users to have at least version "1.7.0_10-b19" installed on their Macs. The release dated February 1 carries the designation "1.7.0_13-b20," meeting Apple's requirements.
    Oracle "strongly recommends" applying the CPU fixes as soon as possible, saying that the latest Critical Patch Update contains 50 new security fixes across all Jave SE products.
    Update foror Snow Leopard users:
    Apple have issued update 12 for Java for OS 10.6:
    http://support.apple.com/kb/DL1573
    Note:  On systems that have not already installed Java for Mac OS X 10.6 update 9 or later, this update will configure web browsers to not automatically run Java applets. Java applets may be re-enabled by clicking the region labeled "Inactive plug-in" on a web page. If no applets have been run for an extended period of time, the Java web plug-in will deactivate.

  • Anyone having problems accessing AT&T app after upgrading iSO to 7.3?

    Anyone having problems accessing AT&T app after upgrading iSO to 7.0.3?

    Well, it actually says "You account type is not supported via the mobile aplication. You can manage your account by accessing the full web site at www.att.com"

  • I'm having problems accessing a site, only on FIOS.

    Hello, I am QuillDepot, named after a NYC bus depot. I am having problems accessing site, (nyctransitforums.com) getting the message "Oops! Google Chrome could not connect to www.nyctransitforums.com". I am in NYC and I have talked to having problems in NYC as well. I have accessed the site using other things beside FIOS and through proxy's. Any help?
    Solved!
    Go to Solution.

    QuillDepot wrote:
    Does anyone have a solution to this problem? This seems to be a problem on Verizon's end.
    Copy/Pasting an answer by Hubrisnxs from here:
    Hubrisnxs wrote:
    This has happened from time to time - but was not Verizon Blocking the website, but the other way around, the website usually will have an out of date bogon filter.    Verizon constantly is giving out new ip addresses to customers, sometimes with brand new IP Blocks as they get more and more customers.  So sometimes the filters in websites, are out of date and don't include the newest ip blocks.  
    Usually you can engage the website owner, ask them to update their bogon filter list with your subnet,  but if that is not easy, then you can turn off your router at night when you go to bed, the 4 hour lease on your ip address will break, 2 to four more hours pass, and your ip will go to a different customer, or cycled back into the cloud, and then when you wake up and turn it back on you will have a new ip, that is likely not blocked.   
    So give that a try.  OR if you are in a rush and need it asap, then release your DHCP ip leave your modem off for at least 10-30 minutes, so your IP can get cycled back into the cloud and you can get a new one.  if you do it too fast, then you will likely get the same ip and that defeats the purpose.  
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

Maybe you are looking for

  • "Not connected to Internet" error message

    Hi Guys, Safari keeps throwing me "you are not connected to the internet" error messages. I'm running 10.5.1 and I chose the "upgrade" option. The errors are displayed randomly on sites and if I get the error upon visiting a site, I usually have to w

  • I need validation code for cycle count open interface

    Hi friends i require the validation code for the cycle count open interface . can anybody help me ....... Message was edited by: user506929

  • How to find Job relationship using the Function Module  RH_STRUC_GET

    Hi Experts, I am getting O-S-P relation ship using for an org unit using the function module RH_STRUC_GET. Further If I want the job relation ship, how it can be found out. Thanks in Advance, Irfan

  • Sat 1710: sound device problems

    I hope somebody can help me out with a problem i'm having with sound on my satellite 1710/windows ME nd I really don't know much about comuters!! I have only had this machine for a few weeks (second hand)and the only sound I can get fromm the machine

  • Help with PHP and CSS links (&mysql results)

    Hi Hope someone can help.  I have a column in a mysql5 database that records if an advert is 'featured' or not with 'yes' or 'no' in the database fields. I'm dynamically creating a list of adverts using php5 and DWCS3 where each ad comprises several