Equium A60 - DVD drive does not read data discs

Hello
I am having a problem with my DVD drive on my Toshiba Equium A60 laptop. The DVD drive (Pioneer DVD-RW DVR-K13A ) will play shop bought films etc without a problem. it will also read a blank DVD when you put it in the drive but once information/Data is on the disc it wont detect the disc.
I am not really that good with computer so any help would be most grateful. The computer used to play everything it just stopped doing it a few months back.
Many thanks Phil

The issue is clear.
Fact is that not all CDs and DVDs are supported and compatible. There could be always an issue with a reading or writing
The same happened to me too I had to test different CDs and DVDs from different manufacturers and finally some medias worked
In your user manual you should find a list of medias which were tested and should run properly check it!
bye

Similar Messages

  • Equium P200 - DVD drive does not read all discs

    My DVD Drive has just started reading some discs and not others, also some of the discs are not read all the time, you can put a disc in click on the dvd drive and it'll open the drive and say insert a disk, device manager says device working properly and driver upto date.
    Does anyone know what the problem is?

    Yes, terentino is right. Would be helpful if you could tell us which discs exactly work and which not. Maybe that would give the answer.
    Did you installed more than one burning application? Sometimes several installed burning applications could interfere with the other one since every application installs some kind of libraries with their own burning/driver engine to control the functions of your drive.
    bye

  • DVD drive does not read SOME discs

    Hello there,
    My DVD drive had been working fine for the last 2 years, but now it sometimes simply won't read some film DVDs. The problem is not related to the DVD area thing. What happens is that I put the disc in the drive, it spends a long time spinning the disc around, and then nothing happens: explorer just shows as if there was no disc in the drive.
    My laptop is a HP Compaq 6715s. My system is Windows XP SP3. My drive lists as a HL-DT-ST DVDRAM GSA-T20L. (For some reason, although I only have one physical drive, another device is listed in the Device Manager just underneath the GSA-T20L: a TSHAJWP XAZ0TU7SPEF SCSI CdRom. But I believe this is a virtual drive created by Deamon emulator?).
    All hints and help would be greatly appreciated!
    Best,
    Pedro

    Also, I forgot to say that I have tested the films that don't work in my machine elsewhere, so I am certain the problem is not in the discs themselves.

  • Tecra M5: DVD drive does not read these mini DVDs

    I have canon dvd handycam, and mini dvd works on it. One month back i recorded movie and pictures on mini dvd using handycam and ran mini dvd on my tecra M5 dvd drive, it worked very fine.
    Now after 1 month i have 5 mini dvds with movies and pictures which i took on 1 month vacation in diffierent countries, i tried my best but tecra dvd drive does not read these mini dvd, cd drive label appears instead dvd drive when i put mini dvd in it.
    All other standard size dvds, cds working fine on it.Its complicated and as well as irritating.
    Any suggestions?
    Why its messedup?

    Seems the lens cannot read this miniDVDs. Possibly the drive lens cannot calibrate and therefore the miniDVDs are nonreadable.
    Try the solution from sascha. Maybe youre a lucky man and it works.
    If not, try to remove the drive physically from the notebook. Reboot the notebook without the drive. The Windows and BIOS shouldnt recognize the drive.
    Then shuts down again, put the drive into the notebook and boot up the unit.
    The notebook should recognize the drive and should indicate the firmware again.
    Im not sure if this will help you but its attemptable

  • My external Iomega DVD drive does not read DVDs. Why?

    My external Iomega DVD drive does not read DVDs. Why?

    what does this question have to do with a mac?  post in the Iomega fourms.

  • Dvd drive does not read dvd but reads cd only.

    my hp compaq 420 core2 duo dvd drive does not read the dvds but only reads the cds. How can i solve this problem, please help me with the correct answer.
    This question was solved.
    View Solution.

    It will likely require replacement of the drive. There is more than one laser in there: one for each function. One can go bad without the other going bad.
    608141-001
    Above is the part number for the DVD burner drive. I could not find one on eBay.  Here is one online:
    http://www.mydvddrives.com/replacement-for-hp-compaq-608141-001-sata-cd-dvdrw-dvd-ram-drive-burner-l...
    Replacement is easy. Remove a single screw on the bottom and slide the old drive out and replace with the new drive.

  • CD/DVD Drive is not reading any discs on Equium A100

    My cd/dvd drive is not reading any discs whatsoever, blank, written or commercially written. It opens and closes and the light to show it is working is on. Device manager says the device is working properly.
    Tried updating drivers, no updates available. Tried system restore back 1 day then 1 week then 1 month and still the problem cannot be rectified. When i put a cd/dvd in the drive and try to access it, it says: D:\ is not accessible. The request could not be performed because of an I/O device error.
    Can anybody help me i've tried everything me and my friends can think of, or is it a better idea to just send it back to toshiba under the warranty.

    Hello,
    Here are a few windows articles that could help.
    http://support.microsoft.com/kb/891894/en-us
    This one might do the trick, if not try this one.
    http://support.microsoft.com/kb/826510/en-us
    Hope these help resolve the problem. If not it could be a registry setting error which can be rectified as well. But only if these 2 above do not help to resolve the problem.

  • CD/ DVD Drive is not reading any discs! - HP Pavillion DV6747TX

    Hi there, I have a problem. My CD/ DVD Drive is not reading any discs! I have no idea what's happened..it was going fine and then all of the sudden it stopped working.
    The computer I have is a HP Pavillion DV6700 or DV6747TX to be exact and the CD/DVD-Rom drive is a TSSTcgrp CDDVDW TS%L632N ATA Device. It seems to be present in the Device Manager and in the Computer Menu. When I put a CD or DVD into the disc drive lights are blinking and it sounds like it's trying to load or do something, but nothing is coming up. CD Drive E still says CD Drive E instead of reading the disc that's in there and when I click on Drive E it says Windows cannot read the disc in drive E.
    I have tried searching the net for answers including the suggestions on this website and have tried a few other ideas I have come across but nothing seems to be working. Any help would be greatly appreciated  

    This is usually  a known software conflict and happens across the board will all computer manufacturers due to a issue with multiple media burning/ripping applications being installed on your system.
    You can either run this file, go online to Microsoft's site for a fix, or manually fix it by following the instructions below:
    Manually delete the registry entries
    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
    322756  (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows
    Note Before you use this method, uninstall all CD or DVD writing or recording programs. Deleting the corrupted registry entries might cause problems with any other CD or DVD writing or recording programs that are installed on your computer. Uninstalling these programs before you start will help you avoid any problems that removing the registry entries might cause. You can reinstall these programs after the problem is resolved.
    This method provides step-by-step instructions for how to use Registry Editor to delete the following corrupted Registry entries:
    UpperFilters
    LowerFilters
    Step 1: Start Registry EditorStart Registry Editor
    Start Registry Editor...type "regedit" into the run box on the start menu.
    Step 2: Delete the UpperFilters registry entry
    In Registry Editor, expand My Computer, and then expand HKEY_LOCAL_MACHINE.
    Expand SYSTEM, and then expand CurrentControlSet.
    Expand Control, and then expand Class.
    Under Class, click {4D36E965-E325-11CE-BFC1-08002BE10318}.
    In the details pane of Registry Editor, on the right side, click UpperFilters.
    Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only.
    If you see the UpperFilters registry entry in the details pane of Registry Editor, go to step 6.
    If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to "Step 3: Delete the LowerFilters registry entry."
    On the Edit menu, click Delete.
    Click Yes when you receive the following message:Are you sure you want to delete this value?
    Step 3: Delete the LowerFilters registry entry
    In the details pane of Registry Editor, on the right side, click LowerFilters.
    Note You might see a LowerFilters.bak registry entry. You do not have to remove that entry. Click LowerFilters only.
    If you do not see the LowerFilters registry entry, unfortunately this content is unable to help you any more. Go to the "Next Steps" section for information about how you can find more solutions or more help on the Microsoft Web site.
    On the Edit menu, click Delete.
    Click Yes when you receive the following message:Are you sure you want to delete this value?The LowerFilters registry entry is removed.
    Exit Registry Editor.
    Step 4: Restart your computer
    Restart your computer. After you have done this, try to access the CD or DVD drive. If you can access the CD or DVD drive, and if you do not receive an error message, the problem is resolved. You can reinstall your CD or DVD writing or recording software.

  • DVD drive does not read media

    Hi. This is regarding my Satellite L750 laptop (1 year old), for the past two days the DVD drive refuses to read any media - CDs/DVDs. I've done extensive and exhaustive searches to find a solution to this problem but to no avail. One of the most common problems I have come across is a software conflict with iTunes (installed on my machine) and a solution which states deleting "LowerFilters" and "UpperFilters" from the registry. I have tried this out but have not been succcessful in solving the problem. Also, the drive is listed in the Device Manager.
    Just for the record, I have not updated/added/deleted any CD recording software or any other software. I have not even updated iTunes for the past two months.
    I'm using Win 7 64-bit OEM.
    Can someone shed some light on this issue? Will appreciate.

    You may want to try this Microsoft Fix-It.
    What can I do if my CD or DVD drive doesn't work properly?
    You could also try using System Restore to restore a previous restore point from before this became an issue.
    If that doesn't work, you could try a recovery. Recovering your laptop to its original, out-of-the-box state is a great way to eliminate software as a possible cause of the problem. Note that doing a system recovery will return the laptop to its default conditions, completely wiping your data. Information on how to perform a system recovery can be found in your user's guide. On most models you can hold '0' (zero) with the computer turned off. Then press the power button while continuing to hold '0' until the recovery utlity starts.
    - Peter

  • The lightscribe DVD drives does not read media. Attempted software upgrade to no avail. Error.

    The drive would not read media regardless of type or format of CD/DVD.  Downloaded and attemted lightscribe DVD software upgrade; however, during installation system generated error stating "InProc Error".  Something in programming of upgrade (get file...).

    You may want to try this Microsoft Fix-It.
    What can I do if my CD or DVD drive doesn't work properly?
    You could also try using System Restore to restore a previous restore point from before this became an issue.
    If that doesn't work, you could try a recovery. Recovering your laptop to its original, out-of-the-box state is a great way to eliminate software as a possible cause of the problem. Note that doing a system recovery will return the laptop to its default conditions, completely wiping your data. Information on how to perform a system recovery can be found in your user's guide. On most models you can hold '0' (zero) with the computer turned off. Then press the power button while continuing to hold '0' until the recovery utlity starts.
    - Peter

  • CD/DVD drive does not read all DVD formats and regions

    Hi
    My Teac-dw-224e-a does not read all DVDs formats and regions.
    It does read CDs but no DVDs at all.
    Not DVD-R and not even regular DVDs. I have checked the region of the DVD.
    I have reinstalled the driver and also tried with different software.
    What can I do?
    Please help!

    Hi
    It is possible that your DVD drive has wrong region settings.
    In this case it is not able to watch all possible DVD movies from different regions.
    Of course you can change the settings 4 times. But after this changing the settings are fixed and its not possible to change it anymore.

  • Dvd drive does not read dvds

    my laptop does not read dvd disks but its able to read some cd disks.
    what should i do

    Are there any discs that it can read?
    Try looking at this article.
    What can I do if my CD or DVD drive doesn't work properly?
    - Peter

  • SD-L622A CD/DVD drive does not read some CD's - Satellite L300-144

    Drive TOSHIBA SD-L622A.
    The drive does not see boot CD with Windows XP Service Pack 3, some of boot CDs with diagnostic utilities (IMHO 2CD format).
    Also these CD does not seen by drive even under Windows XP, Vista.
    To My wife has bought Toshiba L300, but another modification. There there is drive Matsu****a (Panasonic).
    Problems with the same disks has not arisen.
    PS Sorry for a terrible English. My native language is Russian :)

    In the first topic I wrote
    ..+The drive does not see boot CD with Windows XP Service Pack 3+..
    I have taken other disk from my friend - the situation has not changed.
    Installation Windows XP SP3 has a success only after copying the distribution kit on removable HDD and manual install Windows from command prompt
    But I think its abnormal.
    I think, the theme can be closed because this question should be addressed to Toshiba's fimware developers
    +If you cannot use “some CDs with diagnostic utilities” maybe are the problem those CDs. For me it is not so dramatic issue. if you can use all “commercial” medias everything must be OK.+
    May be.....but I have bought two notebooks Toshiba in a day for Me & My wife.
    On my wives notebook all the above-stated disks playing normally, but it has another drive by Panasonic (Matsu****a)

  • HT1567 cd/dvd drive does not read or recognize cd/dvds

    My cd/dvd drive stop functioning when I attempted to install MEDIA NOT CD & DVD BURNING SUITE SOFTWARE and was directed to itunes fo help.  Unforturnately, I have been able to correct the problem to this date....I can not even upgrade the drives, there is always and error message; or an indication that
    the drive is disabled; ( and I can't seem to find instruction to enable the drive), all of this falls uder a Code 32!   I need help.  I have not used the dvd drive on this computer for months.  I will not reinstall the software, which I can't on the computer, but I will not on any other compter.  Can anyone help me?  I've tried just about everything suggested to no avail.

    Hi
    It is possible that your DVD drive has wrong region settings.
    In this case it is not able to watch all possible DVD movies from different regions.
    Of course you can change the settings 4 times. But after this changing the settings are fixed and its not possible to change it anymore.

  • Mat****a UJ841S CD/DVD drive does not read movies from blockbuster

    My dvd mat****a drive UJ841S will read /write everything ok.
    BUT it does not recognize Movies from Blockbuster. I cannot play a movie.
    Can anyone help?
    David

    Hi
    Seems this certain kind of DVD is not fully compatible with this CD/DVD drive
    Sorry but such issues are not uncommon you will always meet some disks which are not fully compatible and that the drives laser lens cannot handle such disk
    But just one question; are these movies created for the European region?
    I mean there are different DVD regions
    As far as I know the movies for European needs region 2
    The United States need region 1 settings and South & Middle America need region 4
    So if you would like to watch DVD designed for USA then you will have to change the region settings to 1.
    But note; you can change the region settings only 4 times then this settings would be locked and it would be not possible to change it again

Maybe you are looking for

  • Which function module could be used to create ACTIONs in transaction

    HI,     when we open a transaction use TCODE CRMD_ORDER, there is always a tab named 'Action'. And Which function module could be used to create a new action? THS!

  • Including Schema owner when generating DDL scripts

    Designer 9.0.4.6 How do i set the option to include the schema owner prefix in the DDL scripts being generate ("generate server model from database") in design editor?

  • # Anchor Tag Syntax

    I have a page with a Dynamic SQL Region that generates several large blocks of HTML. In the SQL code for the region, I have included: '<a name="'||P1_ID||'">'which yields a series of anchor tags that look like: <a name="1">, <a name="2">...This all w

  • Expression node

    What is the correct syntax for an exponent with the expression node? I looked in LabVIEW help, and it looked like it was the '^' character, except that doesnt appear to be correct: The correct output should be 2, but LabVIEW returns 3. Cory K Solved!

  • How to delete and reinstall mail under mavericks os

    How do I delete my mail and reinstall under mavericks os?