ERMS work items not visible in IC Web Client Agent Inbox

We have configured ERMS rule modeler with a routing to an organisation unit if email content contains a specific word.
ERMS seems to work fine as workflow is triggered and work items created in the relevant user SAP inbox (any user assigned to the organisation unit used in ERMS routing.
When I log into the IC Web client and check for email items in the Agent Inbox, the emails are not visible!!!
Has anybody faced a similar issue?

Hi Manoj,
Have you look at this configuration in SPRO
->Agent Inbox ->Setting for Asynchronous Inbound Processing -><b>Define Receving Emails/Fax settings</b> inthis Set Comm.method as <b>INT</b> i.e E-Mail.
Pls check this config and get back me..
Regards
Raju

Similar Messages

Work item cannot be processed from IC WebClient agent inbox

Hi forum,
When I select a work item (service ticket) and click on the
"Interact" or "Edit" button to process the ticket the info
message is displayed as "Unable to process selected inbox item".
If I selct e-mail work item and click on "Interact" its
navigating to the account identification screen, which seems to
be correct. What might be the problem with work item for service
ticket processing from the agent inbox by clicking interact or
edit push button.
Shridhar

Hi Shridhar,
1. Is service ticket link available in your webclient.If not add the service ticket link in the navigation bar profile.
2. Also make sure that the transcation type(with which the search of service ticket happens) is assigned to the business transcation profile.
Wish the information is useful.If it helps, do reward with points.
Regards,
Shalini Chauhan

Work items not appearing in NWBC work overview

Hi,
I am using NWBC work overview to execute work items (EHSM3.0 - Incident management).
I have a custom workflow with one custom task (of type Standard). When the workflow gets triggered I can see the work item for my custom task in R/3 inbox (which we access using Tx SBWP). But the same work item is not appearing in NWBC work overview.
When I replaced my custom task with standard task TS00500003 in the workflow, it did appear in NWBC work overview.
I added an entry in table IBO_C_WF_TAS for my custom task with following details but it did not resolve my issue.
Application ID: EHHSS_INBOX
Task ID: <custom_task_no>
Default Action: INCIDENTEDIT
Is there any other setting/config I need to do in order to view work items (for custom tasks) in NWBC work overview?

Hi,
This is a job of portal consultant to launch SAP GUI for portal UWL workitems also similar to SAP SBWP.
Your portal consultant will be the best guy to answer.
Regards,
Ibrahim

Error in mail box work item not executable

HI,
i build simple WF for approve and reject that send for user to sap inbox
some decision ,when i check the inbox of the user and double click on the line i get some red triangle in the status Colman with
error work item not executable,
what can be the problem?
Regards

HI Raj,
i build very simple WF ,
user decision , i put there user and approve and reject that it.
i execute the WF and go to the SAP user inbox.
in the Work Flow folder i see the task in column executable i see green V work item executable,
status ready when i double click on it to open i get in column executable message work item not executable ,
and status error ,What it can be?
P.S. i check something like that in other system and i don't get the error .
i start the trace SWELS but in SWEL i just see in the log Trace on trace off nothing more .
Best Regards

Siebel Charts gets generated but does not display in the Web client

Siebel Chart is getting generated in NetChart4.6\Server\root\projects\Siebel.chart folder. However does not display on the Web client
There is either no error displayed on the front end...
Also note that Charts is installed on Windows environment and Siebel Server is installed on Linux Server

Dear User,
Thanks for using Oracle communities.
Does this happens in dedicated client as well?
We would need to have traffic captured when you are actually executing actions. The tools like fiddler etc will help here to track the traffic.
I would suggest you open SR with MOS since it will need some analysis on network trace like fiddler. You can refer this thread in SR as well, so that once issue gets resolved thread will get updated with solution which will benefit others.
Best Regards,
Chetan

TFS 2010 Team Web Access Work Items not loading dropdowns and not saving

Some of our users have lost their ability to add new work items. When they select New -> Bug the WorkItemEdit page opens, but none of the dropdowns load and required fields are no longer highlighted. When they click save it acts like
it refreshes, but actually nothing is saved and work item numbers are not assigned. No error message is displayed. This also occurs when they try to edit existing work items. We have checked permissions and these have not changed. We have cleared cache
and rebooted the server and local laptops. Is there anywhere else we can check to see what is going on? Anyone else have this issue before? It seems like we are loosing another person's capabilities every day.

Thank you for your help. We have SP1 scheduled for install Monday morning. However, we have been running a lot of tests. We are testing mainly in Chrome and IE 9 browsers.
I was able to get 2 users back up and working. Not sure what fixed them, but I had them log into the server and test there. Accessing the web portal on the server worked for them and when they went back to their laptops their full capabilities
were working there again. I have since removed their rdp access to the server and the capabilities are still working correctly on their laptops.
However, I have a 3rd user that I had log into the server and updating and creating new work items did not work for him. This is the error he receives when opening a work item. This user did try testing in Mozilla one day this week.
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET4.0C; .NET4.0E; .NET CLR 3.5.30729; .NET CLR 3.0.30729)
Timestamp: Fri, 6 Feb 2015 14:23:43 UTC
Message: 'undefined' is null or not an object
Line: 459
Char: 9
Code: 0
URI: http: //synqtfs2:8080/tfs/web/ScriptResource.axd?d=FYYkafvHmJyg7KmGDtGowHNi60MyDp_sPy-aHe4FCjNjVsni06fZnOIXJiFxZpzcMt92dwoABVR433z1HUUKi-9aLOEO651UC75HFjmS7hvUIPs_HbO_gMhEIFzDLJCRn3-zV0_qstaTszOYGGcLVSqLpmbOMg9VwaYgOa0o__3xszzq_OYpQwOuLyDFEZY_2zbcjg2&t=ffffffffe8aa60f2
Message: 'this.m_scrollCell.style' is null or not an object
Line: 513
Char: 9
Code: 0
URI: http://synqtfs2:8080/tfs/web/ScriptResource.axd?d=FYYkafvHmJyg7KmGDtGowHNi60MyDp_sPy-aHe4FCjNjVsni06fZnOIXJiFxZpzcMt92dwoABVR433z1HUUKi-9aLOEO651UC75HFjmS7hvUIPs_HbO_gMhEIFzDLJCRn3-zV0_qstaTszOYGGcLVSqLpmbOMg9VwaYgOa0o__3xszzq_OYpQwOuLyDFEZY_2zbcjg2&t=ffffffffe8aa60f2

ERMS : Email work items not getting created

Hi Forum
In my test system (CRM 2007), inbound mails were properly coming in and getting distributed to agent's inbox. But after the server restart, I realised that the work items for inbound mails stopped getting created due to which mails are not reaching agent's inbox.
Mails are visible in SOIN but their associated Work items are not there in SWI1.
I have checked almost all the settings like Email Distribution (SO28), CRM_ERMS_WF_CUST (Event lining is in place and is active), swu0 (Event simulation is working).... but still not sure why work items are not getting created for inbound mails.
Any thoughts ? Help will be deeply appreciated.
Regards
Vishal Mani

Thanks Bruno for your time to reply !
I checked this transaction and in overview there are 19 events with errors. But apart from that everything is green.
I checked the Linkages with Error tab and realised that the events with errors belong to object type BUS1006.
In Activation tab --> Linkages --> Object type (ERMSSUPRT2) --> Linkage is activated.
Infact that is the first thing, I checked when work items were not getting created.
So no clue from here too.
Regards
Vishal Mani

Subordinate Items not visible in Tabstrip Contrainer - Web Template

Hello Gurus,
In Web Application Designer I am creating a blank template and adding a Tabstrip Container. Within the Tabstrip Container I am adding an Analysis web item. When I go to "Internal Display" for Tabstrip and click on "Tab Panel" a popbox opens and when I click on the "Subordinate Web Item". I do not see the Analysis web item. I only see the default. What am I missing? Appreciate all the help.
Thanks.
Regards,
bw newbie
We are on BI 7.0 support pack 19.

Hey,
could you please post the solution? I came across the same issue lately and I can`t make a solution
at this point.
thx in advance!
Greets marcus

Items not visible in SAP inbox

Hi,
We have one workitem which is related to 'Deadline Reached'. We can see 5 agents for this work items.
But customer is saying that it is visible only for 1 user, rest 4 can not see.
Even they can not see the 'Deadline Reched' folder in their inbox. We initially thought user could have Reserved he work items but t
he does not.
What can be the reason , please do let us know and how to rectify this.
Regards,
Sandeep Garg

Hello,
Look in the workflow log (SWI1) and/or in SWI5 to see what happened.
What has probably happened is that one user has Reserved it. Then he is the only one who can see it.
An Administrator can "replace" (un-reserve) the workitem via SWIA.
regards
Rick Bakker
hanabi technology

Some workflow Mail items not visible in SCOT in QA but there in Development

Hi,
In our development system and QA system the SCOT is enabled to test the workflow for credit approval. The settings as far as I can see is same in both the systems except in address types maintained in QA is specific and it is * in development. In QA while the task for mails is raised, the items with recipient type Organisation object are not visible in SCOT overview of orders but in development all the items are visible. In development, the mail is also activated based on the user id but this is not working in QA system where the only item that is sending the mail is the one with recipient type Email. Can you plaesea advice what is wrong in teh configuration?
Regards,
Arcahna

Hi,
In our development system and QA system the SCOT is enabled to test the workflow for credit approval. The settings as far as I can see is same in both the systems except in address types maintained in QA is specific and it is * in development. In QA while the task for mails is raised, the items with recipient type Organisation object are not visible in SCOT overview of orders but in development all the items are visible. In development, the mail is also activated based on the user id but this is not working in QA system where the only item that is sending the mail is the one with recipient type Email. Can you plaesea advice what is wrong in teh configuration?
Regards,
Arcahna

Work item not getting displayed in the portal

Hi experts,
We are creating a protoype for one of the standard HCM form for change in working time. When we initiate the process, the workflow is supposed to identify the agent(which is the manager in this case) and push the work item in the inbox of the manager.
In our issue, we are able to see the workitem in SAP inbox, but the same work item is not getting displayed in the portal.
If we try to approve from the SAP inbox, the hard coded message u201CWork item can only be executed using the Portal and the UWLu201D comes. [this comes through the method of one of the tasks 17900101 which we are using for approving the form]
We commented the message by using a Z class. Now we donu2019t get the hardcoded message, but still the workflow does not complete from here.
Can this be aan integration issue of the workflow tasks with the portal??Can someone elaborate on this??

<ItemType name="uwl.task.webflow.TS17900101.SAP_ECC" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
      <ItemTypeCriteria systemId="SAP_ECC" externalType="TS17900101" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="WebDynproApplication" value="ApproveFormApp"/>
            <Property name="WebDynproDeployableObject" value="sap.com/pa~asr~formstep"/>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="openInNewWindow" value="yes"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
You have to say to your portal team to modify their XML file as above. In simple you hvae to configure the task in the portal and in the SWFVISU txn as follows with the following vizualization parameters
Task TS17900101 and visualization type is JavaWebDynpro
APPLICATION     ApproveFormApp
PACKAGE     sap.com/pa~asr~formstep

Work Item Not getting Deleted

Hi
We have a starge issue.
We use the table SWWUSERWI to see all the work items in the user's inbox.
If we delete the work item in this table it will remove the same from user's inbox.
We have a problem now. Even after we deleted all the work items the SRM "Approval" link and the "Inbox" still contains Workitems( more than 200 ).
Is there anyother table or tCode to find the work items in user's inbox'
Thanks
Siva.

HI experts!!
The issue is solved!!!
The another user who is not with the company currenlty had maintained the user who had problem as substitue!!!.. we had to remove the substitute to solve the problem.
Thanks
Siva.

The work item not coming in SAP inbox ....

Hi experts,
I am doing PR realese workflow.It is moved to quality server from development. In quality it is activated and showing no error.When a PR is created mail is send to approver and the workflow is waiting for his approval. But the work item is not available in his SAP inbox. Even he is getting the remainder mails.But the work item is not available in his business workplace(SBWP).I cross checked user ids of approvers. But still its not working ....the mails are sent to approvers external mail ID.....
Is there any configurations to make for making the SBWP active ?????
Pls anyone give me a solution for this problem...
Thanks & regards,
Jayaraj

Hello,
The best solution would be to take your mouse, move your cusror to the top part of your screen, and click on the "Before you ask (here are many workflow answers)" thread. If you've tried everything that is proposed there then please reply to this thread explaing what you have tried.
Cheers,
P.

Crystal Report menu-item not visible on SAP menu of client

SAP 2007A SP:00 PL:38
Crystal Report 2008 (on start menu)
Crystal Report 2.0.0.6
1. Installed CR 2008 on server and it runs fine both from Start menu and from within SAP menu. SAP also shows Crystal Reports menu item and Crystal Admin.
2. Installed Crystal Report on one of the clients and it works fine in same way.
3. On 2nd client, SAP Crystal Runtime installed as follows: SAPCrystalSetup.exe run first, then DotNetFramework3.5 run - it resulted in "Setup error". Then run the CRRuntime_12_0_mlb.exe without errors. Then installed CR designer, On this client, Crystal Reports 2008 opens fine from Start menu. However from within SAP, it does not show Crystal Reports Admin nor the Crystal Reports menu-item.
a) This user has "automatic" start of Crystal Reports 2.0.0.6 in Add-on Administration.
b) However, in Add-on Manager, Crystal Report does not show at all.
c) In Add-Remove programs, I see that Microsoft .Net Framework 3.5 SP1 exists on the client.
d) OS is Microsoft XP.
How could I see Crystal Administration or 'Crystal Reports' menu-item from within SAP on this client?
Thanks, Ajay Audich

Hi,
1) On Add-Remove Programs on the client, I see the following:
Crystal Reports 2008 Runtime
Crystal Reports Basic 2008 for SAP Business One
Microsoft.NET Framework 1
Microsoft.NET Framework 2.0 Service Pack 2
Microsoft.NET Framework 3.0 Service Pack 2
Microsoft.NET Framework 3.5 SP1
SAP Business One Crystal Reports 2.0.0.6
2) The settings are:
Company Preferences for Crystal Reports for SAP Business One / Version 2.0.0.6/ Default Group Automatic/ Active Yes
User Preferences Tab-User RT-Preference is set to Default.
On server, 'Installed Add-ons' tab shows Crystal Status as 'Connected'
However, on the client, Add-on manager, both "Installed Add-ons" as well as "Pending Add-ons" tabs do not show Crystal Reports row at all.
3) The user RT on the client is a super-user.
Thanks.

Goods are not visible on the Web Shop main page (RUMP UP)

Hi colleagues.
Help please anybody :)
There was the problem with the goods in Web Shop.
Goods are not visible on the page Web Shop.
Below you can see actions performed by us and Prerequisites:
1. Repository was unachieved from Standard archive - WEC20_MDMCATALOG_CONS
2. Taxonomy, Hierarchy and Lookup table data were transferred from CRM via MDMGX
3. Manually created root node in Product Catalogs table in MDM
4. Put technical code (ID) of created node to Product Catalog module in WCEM configuration - field Catalog ID.
5. Fill another necessary fields in Product Catalog module in WCEM.
6. Manually add test record in MDM and linked to node in Product Catalog table, elements from Main Taxonomy and other required fields.
7. In preview mode of WCEM configuration not possible see any records from MDM (but product catalog elements showed correctly)
More information about settings in MDM, CRM,WCB and configuration steps can see in attachment files
Best regardn,
Andrey

Hi Denis
Leading zeroes it's no my case, because the products (materials) replicated from CRM to MDM.
Replication from CRM to MDM via MDMGX and Initial Load R3AC1 is successfull.
But on the WebChannel web shop page this products are not visible.
I have suggested that the problem in authirizations of technical user, which uses RFC Destinations from SAP NW AS Java (Web Channel) to MDM.
According Security Guide for SAP Web Channel 2.0 (paragr. 8.3.2 see please screenshot), user of WEC_MDM_DEFAULT destination must assign the role WEBCHANNEL_CATALOG_DISPLAY_ROLE.
But this role does not exist in the system (SAP MDM, SAP NW).
Please give me advice about this.

ERMS work items not visible in IC Web Client Agent Inbox

Similar Messages

Maybe you are looking for