ERP 2005 (ECC6) Ramp-up and Solution Manager
Can anyone share their experiences in using SOLMAN 3.2 as part of an ECC6 Ramp-up project? To what extent is Solution Manager actually being used and what for?
Thanks . . .
We are a ramp up customer and we are using SOLMAN 3.2 for a lot of things. Project management, monitoring etc.
What we would like to use it for also is service desk and management of transports, but we havent got that far.
If you have any more questions lemme know.
M.
Similar Messages
-
Role of a solution manager in MySAP ERP 2005 (ECC6) release
Hi Guru's
I am new for solution manager concept. Will anyone will give clear picture about solution manager in MySAP ERP 2005 (ECC6) release.
Duties and responsibilities of a solution manger in a new development project, upgrade project and maintenance project.
mail me at [email protected]
Reward, full points for answer
Regards,
VilliamsHi,
Please refer the link mentioned
https://websmp205.sap-ag.de/solutionmanager
http://service.sap.com/upgrade
Hope this will help you, revert if you need any more infor.
Best Regards,
Sachin. -
Install both SAP ECC 6.0 EHP 4 and Solution Manager in C drive
Hi, SDN fellows.
I just want to confirm this.
I am trying to install SAP ECC 6.0 EHP 4 and Solution Manager in C drive. Are these OK, since they both will be installed under the C:\usr folder?
What precaution we need to install these two SAP components in the same drive (C)?
I am installing both components in MS Window Server 2008 R2 SP1 with MS SQL Server 2005 SP3.
Thanks,
KCHi, Nick.
Sorry, I missed the "IDES". I am installing SAP ECC6.0 EHP4 IDES system for training purpose within the organization.
I am referring to the Installation Guide - SAP ERP 6.0 EHP Ready ABAP on Window MS SQL Server (Based on NW 7.0 incl EHP 1). All downloaded installation files are from: EHP4 for SAP ERP 6.0/NW7.01 --> IDES --> --> Widnows Server --> MS SQL Server.
The OS is installed in C drive.
I have allocated 250GB in C drive and 200GB in D drive from SAN.
For IDES system (I know it is similar to the standard ECC), is it also recommended to install in D drive (separate from the OS)?
In this case, should I install both Solution Manger and IDES in D drive?
Or what is the best combination where I should install these two systems?
Thanks,
KC -
Can anyone explain difference b/w Schedule Manager and Solution Manager
Hi,
Is there any difference b/w schedule manager and solution manager or both are same. Plz do reply at the earliest.
thanks,
sureshDear Suresh,
Schedule Manager (SCMA):
Schedule Manager automates your routinue task. It facilitate the definition, scheduling, execution, and review of tasks that are executed on a regular basis, such as period-end closing.
Solution Manager - The SAP Solution Manager supports you throughout the entire lifecycle of your solutions, from the Business Blueprint thru configuration to production operation. It provides central access to tools methods and preconfigured content, that you can use during the evaluation, implementation, and productive operation of your systems.
Implementation of the mySAP Business Suite
· All phases of the implementation project (Business Blueprint, Configuration) are performed centrally in the Solution-Manager system.
· Central project documentation repository in the Solution Manager
· Integrated Project Administration allows you to manage planning schedules, human resources and other project data.
Customizing Synchronization
· The Customizing Scout, with which you can compare customizing in various SAP components, e.g. an ERP system with SAP MDM
· The Customizing Distribution, with which you can synchronize customizing in various SAP components.
Test
· You can use the Test Workbench to organize and perform tests at the end of a project phase.
· Reuse of the project structure for process-oriented tests
Global rollout
Integrated authoring environment, with which customers and partners can create their own templates, which they can reuse in subsidiaries, e.g. in a global rollout
E-Learning management
Creation of training material and learning maps (computer-supported self-tuition courses) to train end users after the implementation of new functions
Solution Monitoring
· Central system administration
· Analyze your system landscape with Service Level Reporting
· System monitoring in real time
· Business Process Monitoring
Services
Access to programs and Services, which help you to monitor and optimize the performance and availability of your system landscapes, and minimize your operational system risks
Service Desk
Solution support with workflow to create and handle problem messages
Change Management
Management of change requests, with workflow for the monitoring and audit of changes and transports in your system landscape, with the Change Request Management.
Regards,
Naveen. -
Feature in ERP 2005/ECC6 for MM & SRM
Dear all
Kindly let me know the link for Feature available in ERP 2005/ECC6 for MM & SRM
Regards
M.Chandra mohanHi
check following
/thread/170347 [original link is broken]
The only difference between ECC5 and ECC6 is that additional components like mySAPCRM, mySAPPLM, mySAPSCM, mySAPSRM are added in ECC6.0. HR was already a part of ECC5.0.
http://abdurohman.wordpress.com/2007/06/29/whats-new-in-ecc5-and-ecc6-ecc7/
http://service.sap.com/instguides.
Vishal... -
Pagefile for SAP Erp2005 and Solution Manager 4.0
Hi all,
I've installed SAP ERP2005 and Solution Manager 4.0 on the same server with Windows 2003 Standard 32bit.
The RAM on this server is 3325MB.
How many paging file I must configure???
At the moment I configured the pagefile size as defined in the installation guide:
1 RAM + 8GB that is 12285MB.
Is it correct????
For both instance I set the PHYS_MEM parameter to 2328 (70% of the RAM)...is it correct??
P.S. How to calculate the [BE] parameters??
[BE] = maximum possible number of user calculated from the size of physical main memory
Thanks in advanced
MorenoI agree with Yaroslav,
you should NOT set those values:
em/initial_size_MB |---- [PM] |---- [PM] |Mbyte |
|--- em/max_size_MB |--- 20000 |--- 100000 |Mbyte |
| em/address_space_MB |----- 512 |----- 4096 |Mbyte |
|---- ztta/roll_first |------- 1 |------- 1 |Byte |
|--- ztta/roll_area |--- 2000000 |--- 3000000 |Byte |
| ztta/roll_extension | 2000000000 | 2000000000 |Byte |
| abap/heap_area_dia | 2000000000 | 2000000000 |Byte |
| abap/heap_area_nondia | 2000000000 | 0 |Byte |
| abap/heap_area_total | 2000000000 |[PM]*1048576 |Byte |
|- rdisp/ROLL_MAXFS | [BE] * 100 | [BE] * 100 |8KB Block |
|--- rdisp/ROLL_SHM | [BE] * 100 | [BE] * 100 |8KB Block |
|--- rdisp/PG_MAXFS |--- 32768 |--- 32768 |8KB Block |
|----- rdisp/PG_SHM |
so... that [BE] value is not to be used. -
User synchronization issue between Active Directory and Solution manager.
Requirement:
Synchronize the users between Active directory and solution manager system.
<u>What we did:</u>
1. Created RFC connection (LDAP_RFC) for LDAP connector.
2. Created new LDAP connector that utilize the RFC (LDAP_RFC).
3. Created new logical LDAP Server(CUA).Here we have to maintain the connection
details to the physical directory.
4. We maintained the communication user that is used by the LDAP connector to bind the LDAP Directory Server.
5. In transaction LDAPMAP specific SAP data fields, we mapped to the desired
directory attributes.
6. Testing from LDAP transaction working fine. We are able to see the attributes and
values from Active directory.
<b><u>Issue:</u></b>
When executed the program RSLDAPSYNC_USER for user synchronization from t-code se38 with below selection .
LDAP Server = CUA (created earlier)
LDAP Connector = LDAP_RFC (RFC connection created created ealier)
In the tab: (Object that exist both in the directory and in the Database:)
Selected: Compare Time Stamp.
In the tab: (Objects the only exist in the Directory.)
Selected : Create in Database.
In the tab(Objects that only Exist in the Database:
Selected: Ignore Object.
Result from the report shows that connection to LDAP server is fine and 0(zero) objects in Directory.
The program does not create any new user in the Solution Manager system.
Any help on this issue greatly appreciated.
Thanks & Regards,
Harishwhere did you see this error ? is there anymore details.
i think the account you are using for Sync does not have Replicate Directory Changes permission in AD. follow below article and give Replicate directory changes permission.
http://technet.microsoft.com/en-us/library/hh296982(v=office.15).aspx
Thanks, Noddy -
EP and Solution Manager Via Webdispatcher
Solution Manager Via Webdispatcher
Dear All,
We have installed the Webdispatcher 7.4 and did the SSL setup and maintained necessary parameters to access our Portal and ECC systems from internet and its working fine for indepedent Java and ABAP stack.
Now when we are trying to access the solution manager via webdispatcher using webgui, it opens but when its calling the webdynpros like solman_setup, the page is not openning. The same case is in our portal system also, when its calling the webdynpro of backend system its not openning.
During our analysis we found the urls are called from the local machine to the backend host (ABAP) directly and there is no where its communicating the webdispatcher.
Can you please guide me what kind up setup can be done to access the Portal and solution manager complete functionality via webdispatcher.
I have checked many posts on the forum and was totally confused on the solution approches. So trying to filter it down to do a proper setup which is feasible to our landscape and infra team.
FYI Our Solman is on 7.1 SPS10 and portal is on 7.4, OS windows
Looking forward for your valuable inputs
Thanks & Regards,
SatyabratThanks Samuli,
I tried it..its working for solman but in my ECC (NW 7.31) its not working for web dynpros. Its going to hostname:8001 port and not redirecting to webdispatcher.
Pleae let me know if I am missing something.
Thanks & Regards,
Satyabrat -
How to start installing CRM, ERP and SOLUTION MANAGER on a VM
Dear all,
It has been some years now that I installed a CRM and ERP system (this was in the days of dual stack ). Now I see that dual stack is depricated and that everything runs on a Netweaver base.
My question is now the following;
Can someone please tell me how to proceed to install these 3 SAP components on 1 server, each on its own virtual machine?
I suspect that I will first have to install the OS (RHEL 5.6 64 bit) and then I will have to install the DB (Oracle 11.2i). After this I start the installation of the SAP component or is there someting I need to do to get the Netweaver part on the server first?
And where can I find EXACTLY which files I need to download from the SAP site for each component, because the CRM part for instance has a ton of files and there is nowhere an indication that says '"this is the normal installation package".
Kind regards,
David> I suspect that I will first have to install the OS (RHEL 5.6 64 bit) and then I will have to install the DB (Oracle 11.2i). After this I start the installation of the SAP component or is there someting I need to do to get the Netweaver part on the server first?
not quite right.
You start sapinst, it will proceed a number of sections and then request you to install the database. Do not install the database before. This is also convered in the respective installation guide.
> And where can I find EXACTLY which files I need to download from the SAP site for each component, because the CRM part for instance has a ton of files and there is nowhere an indication that says '"this is the normal installation package".
This depends on how you use the CRM system, whether you use componnets, that require Java or not.
All that is covered in the installation and master guides. Yes, they are big and yes, they contain a lot of redundant information. But don't expect to start a program and do next-next-finish.
I would start with Solution Manager becaues you will need that system to generate installation keys for the other systems.
Markus -
Problem with Aris and Solution Manager
Hi,
I'm trying to synchronize Aris and SAP Solution Manager.
I'm doing installation and configuration following Administration Guide
chap. 7 from Aris for Netweaver guide, but, I have a problem when I
try to transfer projects from Aris to SolMan.
In the main ARIS menu from ARIS Business Architecture for SAP NetWeaver>
Aris Network>LOCAL>Synchronization>Maingroup, a SAPLogon screen appears
to logon to SolMan system, ask for Client, User and PWD.
I put the same user/pwd that I use to logon to SolMan, but ARIS cannot
connect to, an error message appears "User or password incorrect".
Does anyone have idea about this problem??
ThanksMariana,
try changing your password to all CAPS in Solman.
regards,
Jason -
Install ECC 6.0 and Solution Manager on same server Error (MaxDB/Linux)
I have installed Solution manager on one server and then ECC 6 also in the same server with another SID. during the installation it errored out at phase "SLD configuration" with UME error , J2EE_ADMIN locked etc..we checked the user id and noticed it got locked in ECC 6 system and we unlocked it.
But after the ECC installation the solution manager java engine is not coming up error with "com.sap.security.core.ume.service failed" error. Prior to the ECC installation the Solution Manager J2EE was working.
thanks in advance
Mathewerror in the /j2ee/cluster/server0/log/defaultTrace.1.trc
is as follows
#1.5#00137256A483001E0000001700006F190004163784D40864#1150327614343#com.sap.engine.core.Framework##com.sap.engine.core.Framework#######SAPEngine_System_Thread[impl:5]_61##0#0#Fatal#1#/System/Server#Plain###Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.#
When I looked at using jcmon the dispacher is up and the server0 and SDM is down -
Integration of new BPM (NWDS EHP1) and Solution Manager process graphics
Hi Experts,
we are trying to use Solution Manager for our client's process documentation. Now, Solution Manager generates a graphic which unfortunately is almost unusable (no lanes, no transaction link, just visio-like graphic). Even the old ASAP 4.6C graphic tool was better and more interactive.
On the other hand the new BPM in NW Developer Studio EHP1 Composition Environment seems to provide a perfect graphical tool for process modeling and documentation.
Does anybody know if there is a (future?) possibility to integrate these two tools?
As an alternative, does anybody have an idea how to get better Solution Manager process graphics?
Michael MeissnerI also digged a little into this topic since I was wondering about the different modeling techniques SAP currently provides and how they will be integrated in the future.
[This|http://www.feedingthesapecosystem.com/2009/05/sapphire-09-part-ii-high-stakes-of.html] great blog entry about NW BPM also includes some comments about the future vision of integration between NW BPM and SolMan. It looks like in NW BPM 7.2 (planned for end of the year) there will be a "read-only" integration with SolMan processes while in the future there will be a bidirectional integration which means that BPM can import SolMan processes, enhance them and again export the models to SolMan. This is a great step further to the Common Process Layer SAP is referring in the [BPM Roadmap document|https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/003cf0a1-e8fa-2a10-7db5-ba245a663d9f&overridelayout=true].
Cheers,
Mane -
EP 6.0, SP11 and Solution Manager 3.2
Hi everyone,
Is it possible to do add EP satelite systms?
currently I am on solution manger 3.2, kernal 6.40 and
Enterprise Portal 6.0, Service Pack 11
I would really appreciate if anyone can answer this question and great points will be rewarded
thanks
DeepakI like to add enterprise portal atelite systems using solution manger 3.2, but I am not sure if it is doable for enterprise portal 6.0 sp11.
I like to monitor enterprise portal 6.0 sp11 using solution manager 3.2 and add satelite systems. I hope this is clear.
thanks
deepak -
CATT's and Solution Manager 3.2
Hi, i'm implementing SAP ECC 5.0 with SolManager 3,2.
In the SOLAR02 transaction, in the "test case" tab of a process step, i want to assign a Test Case of type "CATT";
Is it possible to assign a CATT already created in the Solution manager instance? I mean, i dont want to assign or create a CATT from another system.
Thanks in advance!Thank You Jonathan!
I already tried that, but the only objects i could set centrally for saving in the SolManager system are:
1. eCATT test configuration
2. Manual test cases
I could not assign standard CATT's to be saved centrally in the SolManager.
I do not know if this is a std feature (and CATT's could not be assigned to be saved centrally) or if i'm doing something wrong. Any help is most welcomed.
Thanks for your help.
Regards, -
Hi there,
we have a scenario with 2 XI (PI 7.0) Systems (<SIDa>, <SIDb>) with a central SLD for the whole system landscape.
In Solution Manager 4.0, in transaction SMSY (landscape components), one XI is registered as "SAP Exchange Infrastructure --> <SIDa> --> SAP Exchange Infrastructure" with Product Version "SAP Exchange Infrastructure 3.0". The other XI is registered as "SAP Netweaver --> <SIDb> --> Application Server ABAP" with Product Version "SAP Netweaver 2004s".
In my eyes that is wrong (shouldn't both of them be under the same entry?). What can be happened here? How should we resolve that? Could this setting result in problems with EWA or central monitoring?
Thank you,
MatthiasThanks for the answer!
Just that I get you right: Both XI systems have to be registered twice? Each as WEB AS ABAP and Exchange Infrastructure in Solution Manager?
Matthias
Maybe you are looking for
-
I can not open any email attachments-large or small. I had adobe and switched to internet explorer. I do not have any other choices on my computer to pick from other than word pad and it opened the attachment but was not readable.
-
How can i get rid of all of the "other" stuff on my ipod.
I can't get it and my ipod is over capacity because of the "other" stuff on there .
-
Explain plan on Update statement in function
All, I have an update statement in a function and my explain plan shows: "Optimizer" "Cost" "Cardinality" "Bytes" "UPDATE STATEMENT" "ALL_ROWS" "2" "1" "7" "UPDATE user.<table_name>" "" "" "" ""
-
Just moved to ISP PLUSNET and now loading web pages is dead slow
Just moved to ISP PLUSNET and now loading web pages is dead slow. Like loading google will sometimes take 30 seconds to 1 minute but it used to load in a fraction of a second on my previous ISP. Sometimes a new URL will take over a minute so I hit St
-
After right clicking the Firefox Icon, a window pops up above the icon with three sections in it. Two are titled, they are "Frequent" and "Tasks." The "Frequent" section each time I see it, has added previous sites that I have visited. This list then