Erp2cod.opportunity.replicate gives error in HCI

Hello,
We have configured Opportunity followup from COD to ERP, which works fine and creates the relevant Inquiry and Sales Order, but the followup gives issues in HCI.
I am facing an error message in HCI, when message comes in from ERP to COD for the scenario Opportunity replicate.
"Response was of unexpected text/html ContentType.  Incoming portion of HTML stream: (none)"
I have tried 'compress message' in the Adapter specific setting. But it did not work. The message does not show in HCI at all.
Message Processing Log{
  ContextName = com.sap.scenarios.erp2cod.opportunity.replicate
  IntermediateError   = true
  MessageGuid = AFNCzMSfl9LELIbW0jwOxAaCarSA
  OverallStatus = FAILED
  ReceiverId = COD_
    Children [
    Invoked endpoint{
      Cxf.EndpointAddress = https://iflmaptxxxxx-hxxx.intaas.hana.ondemand.com/cxf/ERP/COD/COD_OPPT_CONF.ORDERS05
      Error = Inbound processing in endpoint at https://iflmaptrxxxx-hxxx-intaas.hana.ondemand.com/cxf/ERP/COD/COD_OPPT_CONF.ORDERS05 failed with message "[CXF][Transport][HttpException]:HTTP response '500: Internal Server Error'", caused by "Response was of unexpected text/html ContentType.  Incoming portion of HTML stream: (none)"
Could anyone help in this regard.
Regards,
Sangeeta

HI,
check you actual endpoint in HCI - https://iflmaptrxxxx-hxxx-intaas.hana.ondemand.com/cxf/ERP/COD/COD_OPPT_CONF.ORDERS05 can't be correct.   (or did you put in the iflmaptrxxx-hxxxx).   
If you go to the Operations view - select your IFLMAP  and services- you can see the real end points - for example: https://iflmaptakt9sodw004avtdmo-sodw004.bsn.neo.ondemand.com/cxf/ERP/COD/COD_OPPT_CONF.ORDERS05_BLR
This end point needs to map what's in your RFC destination- I think your SM59 entry is wrong.
Here is a SM59 example:
If you didn't get a message in HCI, then it couldn't reach the endpoint. 
-ginger

Similar Messages

  • RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

    HelloThank's for your helpsI hope this document is helpfulBest Regards,
    Date: Sun, 22 Jun 2014 17:10:17 -0700
    From: [email protected]
    To: [email protected]
    Subject:  when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
        when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
        created by Anoop9178 in Adobe Reader - View the full discussion
    Hi,
    Would it be possible for you to share the document?
    Regards,
    Anoop
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
         To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Reader by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

    thank's for reply and your help
    i did the step's that you told me but  i still have the same problem
                                     i have the latest v.11.0.7
    i
    i disable the protected mode

  • ITunes new version doesn't open at all. Gives error message

    I downloaded 7.4.3 version of iTunes and it doesn't open at all. Gives error message. "iTunes has encountered a problem and needs to close."
    I have previous version of iTunes in my spare HD, in the same computer, and it works perfectly fine.
    I have unistalled and re-installed again and again many times including with the help of Apple Support help in the phone and came up with no clues of what's going on.
    How can I get a previous version of iTunes to download to my PC? I have looking for a place on Apple's website where I could probably have my issue resolved, but I found nothing.
    Thank you.

    Thanks to Jim Zack, the problem is solved.
    If you're having this problem, go find the solution at the following page and read Jim's suggestion.
    http://discussions.apple.com/thread.jspa?threadID=1155613

  • Report server gives error

    i have installed oracle 9i AS (EE)on NT,
    Now i want to display reports in pdf/HTML on web broswer. For that i am trying to run report tester page given through broswer it is showing one page having Button(run report), when i click on that, it gives error unable to connected to database, and request rejected by report server. WHY ???
    i want to display reports through JSP How it can be done? Does anybody knows it?
    Naresh
    null

    Please check at http://<server>/dev60html/runrep.htm for follwings :
    01. your test.rdf must be in report60 folder
    02. your db must contain scott user
    03. connect string must be tested and give the same inplace of test
    04. your webhost may contain a dot, please check this should be the same as yours
    hope this will help
    bye !

  • Report builder error after applying sql server 2008R2 SP3 when click on report builder gives error like 'Application validation did not succeed. Unable to continue.

    Hi All,
    I applied SQL server 2008 R2 SP3 recently but report builder doesn't work since then
    When click on report builder gives error like 'Application validation did not succeed. Unable to continue.
    and when I try to see details the error summary like following:
    +File, Microsfot.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
    this is urgent.
    Please reply me asap.
    thanks a lot in advance.
    Regards,
    Nik
    Regards, Naman

    Hi nikp11,
    According to your description, you recently updated SQL Server 2008 R2 to SP3, Report Builder doesn’t work since then the error occurs: "Application validation did not succeed. Unable to continue".
    This is an known issue in SSRS 2008 R2 SP3 that Microsoft has published an article addressing this issue. It is not planning to release a fix for this issue. But we could implement one of the following workarounds:
    Install and run Report Builder 3.0 of SQL Server 2008 R2 RTM.
    Install and run Report Builder of SQL Server 2014.
    Uninstall Service Pack 3 then uninstall Service Pack 2 and then reinstall Service Pack 3.
    Reference:
    Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch
    Thank you for your understanding.
    Best Regards,
    Wendy Fu

  • When i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th

    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ?
    if you can help me thank's
    [email address removed by host]

    thank's for reply and your help
    i did the step's that you told me but  i still have the same problem
                                     i have the latest v.11.0.7
    i
    i disable the protected mode

  • After upgrading to Lion Image Capture does not work, even though it is intel software.  Gives error 9931.  What gives?

    After upgrading to Lion, Image Capture does not work, even though it is intel software.  Gives error 9931.  What gives?

    Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
    Didn't used to be this way before Lion/10.7.
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • How to give error message for the screen element text field when wrong i/p

    How to give error message for the screen element text field when wrong i/p
    when wrong input given
    eg. 
    I have a text box with SBOOK-CARRID
    so when user give wrong entry in text box i.e LG
    then I should give some error stating that the the input is invalid or not available ,
    now it showing the error of standard messages,
    i want manual message to be displayed when error comes.
    Thank you,
    Regards,
    Jagrut Bharatkumar Shukla

    Hi all,
    Thank you for your valuable reply,
    but the thing is that its a screen field,
    i.e text box not a selection screen
    i created in screen layout
    with name sbook-carrid
    now i want to get error message display if wrong i/p is given
    thank you.
    Regards,
    Jagrut bharatkumar Shukla,

  • How to Update a clob column..it gives error string literal too long

    I am trying to update a clob column of a table but it gives error string literal too long plz tell me what's the issue
    ORA-01704: string literal too long

    Peeyush wrote:
    I am trying to update a clob column of a table but it gives error string literal too long plz tell me what's the issue
    ORA-01704: string literal too longThere's a problem with my car. It won't start. Why won't it start? Please tell me!
    Oh wait, you can't, because I haven't given you nearly enough information...
    In other words, if you would like help in trying to work out where you've gone wrong, you should provide a small enough example of your code that demonstrates the error. We might then actually stand a chance of being able to help you!

  • SSAS Tabular - Adding Column to a table gives error "Object reference not set to instance of object"

    If I make changes to a table in SSAS Tabular Visual Studio, the newly added column gives error as "Object
    reference not set to instance of object"

    Hi VikasJain13,
    According to your description, you get the "Object reference not set to instance of object" error when adding columns in Tabular. Right?
    Generally, it throws this error when the internal code is accessing the property of an empty object. As you mentioned it happens when you make changes on a table, mostly it means that table is already a empty object. Please re-process your tabular to see
    if this table is still existing. 
    If you have any question, please feel free to ask.
    Simon Hou
    TechNet Community Support

  • GI installtion gives error while executing root.sh for ASM diskgroup

    Dear Gurus,
    We are implementing a 2 node RAC configuration with ASM on vmware and openfiler on LINUX RHEL 6.2. We started our installation with grid infrastructure. While executing root.sh on node 1 it gives error diskgroup cannot be mounted and no alterntions perfomed as below.
    +[main] [ 2012-10-04 05:38:33.150 PDT ] [UsmcaLogger.logException:173] SEVERE:method oracle.sysman.assistants.usmca.backend.USMDiskGroupManager:mountDiskGroups+
    +[main] [ 2012-10-04 05:38:33.151 PDT ] [UsmcaLogger.logException:174] ORA-15032: not all alterations performed+
    ORA-15017: diskgroup "CRS" cannot be mounted
    ORA-15088: diskgroup creation incomplete
    +[main] [ 2012-10-04 05:38:33.338 PDT ] [UsmcaLogger.logException:175] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-15032: not all alterations pe+
    rformed
    ORA-15017: diskgroup "CRS" cannot be mounted
    Note:- we are not using ASMLib. We presented the LUN's to oracle binaries with Multipathing.

    Put here relevant info of alertlog of ASM and CRS.
    Please format your text by using tag at begin and end of output.                                                                                                                                                                                                                                                           

  • Time Characteristics not become active gives error in BW 7.4

    Hi Experts
    We have imported IO's in BW 7.4. Some info Objects are active but some are not getting active specially Time Char.
    It gives error while activating. I am attaching the error image. I am looking forward experts input how these Time Info objects can activate.
    Thanks
    Sweta

    There may be inconsistencies with table entries for table 'RSDCHATHJ'. Please check them.
    Regards,
    Jagan

  • Playing mp4 audio gives error message "Video can't be played because the file is corrupt"

    Playing a particular mp4 audio file directly from a website link gives error message "Video can't be played because the file is corrupt". However other mp4 audio files from this same website do work correctly. What can I do to get all the the mp4 audio files to play directly from the same website? I must have the correct plugins, etc. since the other files play. This file is not playing from YouTube, is it on the website.
    Thank you for your help.

    What is the link to the site and file in question?
    MP4 files should be handled by Firefox itself, not a plug-in.
    # Click the ≡ Menu Button and choose Add-ons.
    # Click Plugins.
    # Set every plug-in to "Never Activate".
    # Try loading the file again. Is there any difference?
    You have two versions of Flash Player installed. Perform a clean installation of Flash Player as follows.
    # From the following page, save the uninstaller somewhere handy, like the desktop.
    #* [http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html#main_Download_the_Adobe_Flash_Player_uninstaller Uninstall Flash Player for Windows | Adobe Support]
    # From the following page, save the installer for other browsers. If you also use Flash Player in Internet Explorer, also save the ActiveX version.
    #* [http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#main-pars_text_4 Direct downloads of Flash Player for Windows | Adobe Support]
    # Exit all applications.
    # Run the uninstaller.
    # In Windows Explorer, try to open the following folders. If they still exist, delete them manually.
    #* <pre>C:\Windows\system32\Macromed\Flash\</pre>
    #* <pre>C:\Windows\SysWOW64\Macromed\Flash\</pre>
    #* <pre>%AppData%\Adobe\Flash Player\</pre>
    #* <pre>%AppData%\Macromedia\Flash Player\</pre>
    # Restart your computer.
    # Run the installer for other browsers.
    # Run the ActiveX installer if you downloaded it.

  • In Windows 7, iTunes  gives error message "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the phonon then try again.

    In Windows 7, iTunes  gives error message "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the phonon then try again."
    I have a iphone 4S. It has been activated on Win 7 computer and synced. But overnight this meassage reappears.

    I have same error except that i get it even when my phone is not connected.

  • While Changing the status system gives error

    Dear Experts,
    In Solution Manger,  While changing the status from Tcode SE38 with Program CRM_SOCM_SERVICE_REPORT system gives error.
    Document 8000002519 refused for technical reasons: ERROR_FREE
    Message no. SOCM_ACTION_LOG203
    Diagnosis
    The status value cannot be changed.
    The document may no longer be modifiable as a result of its status, or it may be being edited by another user.
    System Response
    This change transaction is skipped during report processing.
    Procedure
    Analyze the corresponding document during transaction processing and perform the status change manually if necessary.
    Also if i select the status as in process, then it executes sucessfully.  Please help me in this.
    Ramesh Jaiswal
    9867936636

    Hi Ramesh,
    Pls check your SP level because till SP17 this (CRM_SERV_REPORT) Tcode is not present
    I just checked.
    So it seems this is availabe only after SP18.... we can use the above report.
    Kindly confirm once you solve your problem.
    Dirk
    Can you please tell us a document which wil tel us what technical things have been changed in this new SP18.for e.g the source for this information.
    Regards
    Prakhar

Maybe you are looking for