ERP6.0 installation error: require help

hi everyone,
i am installing erp6 sr3 abap+java on linux rhel5 and oracle10.2.0.2.
i am stuck with phase 12 "create database"..... the error is below:
ERROR 2011-01-20 11:39:24.936
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/orafiles/SE0/origlogA/cntrl/cntrlSE0.dbf'
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 2
what i have tried;
1) gave permissions to owner and group
2) gave 777 to /orafiles(after 3 days of unsuccessful attempts)
3) linux kernel parameters set according to note 1048303
4) hard soft limit for nofile set appropriately
5) fs.file-max parameter set accordingly
6) sqlplus show parameter control_file points to the right locations
7) IBM java paramaters set
8) umask 022 set
9) tmp, TMP variables set
please can anyone help, im running out of ideas
Thank you.
Edited by: Shanser on Jan 20, 2011 2:36 PM

i did give 777 to /orafiles .... but still same error...   this is wat i really dont understand, why inspite of giving 777 it is not able to create....
the file system is :
/dev/vg0/rootvol        /                       ext3    defaults        1 1
/dev/vg0/usr            /usr                    ext3    defaults        1 2
/dev/vg0/freespace      /freespace              ext3    defaults        1 2
/dev/vg0/tmp            /tmp                    ext3    defaults        1 2
/dev/vg0/export         /export                 ext3    defaults        1 2
/dev/vg0/var            /var                    ext3    defaults        1 2
LABEL=/boot             /boot                   ext3    defaults        1 2
tmpfs                   /dev/shm                tmpfs   defaults        0 0
devpts                  /dev/pts                devpts gid=5,mode=620 0 0
sysfs                   /sys                    sysfs   defaults        0 0
proc                    /proc                   proc    defaults        0 0
/dev/vg0/swapa          swap                    swap    defaults        0 0
/dev/vg0/swapb          swap                    swap    defaults        0 0
/dev/vg0/swap2          swap                    swap    defaults        0 0
/dev/vg0/swap1          swap                    swap    defaults        0 0
/dev/vg001/usrsapSE0           /usr/sap/SE0                  ext3    defaults        1 2
/dev/vg002/usrsaptrans         /usr/sap/trans                   ext3    defaults        1 2
/dev/vg003/sapmnt              /sapmnt                   ext3    defaults        1 2
/dev/vg004/sapstage            /sapstage                    ext3    defaults        1 2
/dev/vg005/oraunix             /oraunix                     ext3    defaults        1 2
/dev/vg006/orafilesSE0             /orafiles/SE0                      ext3    defaults        1 2
/dev/vg007/oraarchiveSE0             /oraarchive/SE0                      ext3    defaults        1 2
/dev/vg008/orabackupSE0             /orabackup/SE0                       ext3    defaults        1 2
/dev/vg009/swap01                  swap                    swap    defaults        0 0

Similar Messages

Envy 5640 - Windows Vista Driver Installation Error - Please Help

Hi
Having problems installing the supplied (and downloaded) driver for our new HP Envy 5640 on my daughters Sony Vaio running Vista.
The printer is up and running and working perfectly on our iOS and OSX Mac devices.
The PC can see and communicate with the Printer.
But when I go to install the supplied (and the downloaded) driver/software it comes up with the following error:
<<
Install Failed
The software required for your printer could not be installed.
For more information click the Details button below.
DETAILS...
The unsuccessfull instalation will be cleaned up, and then you will be guided through searching for and applying a solution to this issue.
>>
Then when DETAILS... button pressed:
<<
Installation Error
Key not valid for use is specified state.
>>
I haven't entered a key, nor a state? I'm in the UK.
Any ideas?
Thanks in advance
Dave

Hello there! Welcome to the forums @Stodgy70
I understand you're facing troubles when installing your Envy 5640 on a Windows Vista system.
After researching the error you're receiving, I would suggest creating a new User Account on the computer and ensuring it has Administrator Privileges, and trying the installation again from there.
Here is the direct link for you to download and install the printer on Windows Vista:
HP ENVY 5640 e-All-in-One Printer series Full Feature Software and Drivers
Please let me know the results, have a great weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Garageband installation error please help??

At some point in time my GarageBand started giving me and installation error, it says " please ensure this product has been installed properly" if i hit ok i get that message a couple more times and then another message that says "registry error". After i click ok i get this same message about 4 times and then GarageBand hangs there forever until I click the icon again and then it opens fine.
I have reinstalled the software several times and updated with any updates neccessary with no success. I also have Protools installed on my mac. I never had a problem running both, and I am not sure where these errors came from or how to fix them.
I have a 2009 Macbook Pro 13" 2.4, with 4gig Ram and am running Mac OSX Version 10.6.8 with iLife11
Also not for sure if this is related to the errors but everytime I import a stereo mp3 it plays only to the left side. The right side is very week and barely noticable.The wave form on the track shows up that way as well. What may be causing this?

I looked at the Protools site: http://avid.force.com/pkb/articles/en_US/compatibility/en352429
You are having protools 7.4 and mbox; both are officially not supported for Snowleopard, see
Pro Tools 7.4.2 is not officially qualified with Mac OS X 10.5.5 and higher.
and
Not Compatible with Mac OS X 10.6
Pro Tools 8.0.3 software and higher does not support some retired products:
Original Mbox
Your Protools may be causing these messages - check the Console what you see there.

ITunes 8 Installation Error PLEASE HELP!!

Ok, I know that this problem has been posted before and the last post was April of 2008.
I recently bought an iPod Touch (16gb 2nd gen)and I have downloaded the software for iTunes 8 on and I am attempting to install it. When I get into the installation process, I receive an error message that says:
An error occurred during the installation of assembly ‘Microsoft.VC80.CRT, publicKeyToken=”ifc8b3b9a1e18e3b” (etc). Please refer to Help and Support for more information. HRESULT:0x8007054F. The installation process is then "rolled back".
Now, even though iTunes will still install onto my computer and appear to function, it will not sync with my iPod Touch. When I plug in my iPod to sync with iTunes, I get this message:
"This iPod cannot be used because the required software is not installed. Run the iTunes installer to removed iTunes, then install iTunes again."
I uninstalled iTunes and reinstalled it and the SAME thing happens! I have NO IDEA WHAT TO DO, and I need any help I can get. I have followed all of the information found on different forums online and it either didn't work, or I didn't understand the computer lingo. If anyone knows a solution OR if anyone has had the same issue and found a solution, PLEASE HELP! I didn't get this iPod to not be able to use it!
HELP!

Hi M2i7guel,
Welcome to Apple Support Communities.
It sounds like there is an issue installing iTunes and other Windows updates on your PC. The article linked below provides troubleshooting suggestions that will resolve most issues like the one that you've described.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
I hope this helps.
-Jason

DTM 6.0 sync error 2753 and windows installer errors, please help

I have tried install and uninstall over 5 times with the same errors
, this is what happens when i install
when i start to install DTM 6 on Win7 64bit, first message i get says.
Windows Installer, Pending Microsoft Visual C++ 2008 Redistributable, it tried to install this but then says failed to install even though its already installed, therefore i cancel this carry on with the install which completes.
Now when i run the application and click on back up, i get a box saying The error message says, " The feature you are trying to use is on a network resource that is unavailable". It is looking for the Apploader.msi file in the C:\Documents and Settings\user\Application Data\Research In Motion\BlackBerry\ directory.. i have tried looking for Apploader.msi but it does not exist so i have to cancel, if i keep pressing cancel it does eventually backup. but i can not sync as every time i try to setup the sync config setting i get a error message. error 2753 The file MsOutlookApiProxy64.exe D9D285E5_C9F0_4101_A12C_555AE1C1593F is not marked for installation
I have tried searching the web but no one can help, Like you say what the point if i can't sync.
Please if anyone can help fix this, i would regard them as genius
Solved!
Go to Solution.

Hi beeman,
Try clean uninstalling then reinstalling the Blackberry Desktop Software 6.0 following this KB article. http://bbry.lv/da1SoE
Hope this helps,
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Adobe After Effects Cs6 Installation Error. HELP!

When i do my installation of Adobe After effects cs6, i install as trial version, because i want to see what it is like, and i do everything like everyone says, and then it stops at 2 percent saying Installation Failed and it comes up with these solutions, and i did them all about 5 times and it STILL wont work! SOMEBODY HELP!
And it also saidthis in the error summary:
Payload '{0A1E2FE2-B2AD-42F4-9C74-641853FB093A} Photoshop Camera Raw 7 6.0.98.0' information not found in Media_db.

I have exactly the same problem when installing CS6 Trial.

SAP BW Installation Error - Please Help

Hello Everyone,
I'm trying to install SAP SEM BW 7.00 in one of the servers that we have. During installation, In the Installation Master I'm selecting the central system from the following
SAP NetWeaver 2004s Support Release 2
>
SAP Systems
>
MS SQL Server
>
Central System
>
Central System Installation
I'm able to select the settings and the installation proceeds as usual, however during the 29th phase of the installation, "Check DDIC Password" fails and an error message is thrown which says
"Test Logon to SAP system BW1 Failed. Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct."
Initially I though I have to manually start the instance in SAP MMC and started it, even then it gives the same error message, then I doubted that I might have entered the password incorrectly during initial setup, so I formatted the system and started installation again, no use again, it is giving the same error message.
I'm not sure what could possibly be wrong.
I would really appreciate if someone could help with with this issue. looking forward to hear some possible solutions.
Thank you.
Best Wishes,
Jegan
Edited by: Jegan Azhagesan on Nov 24, 2008 8:42 PM
Edited by: Jegan Azhagesan on Nov 24, 2008 8:43 PM

Hello Warren,
I tried to login and change the ddic password, it is not allowing me to login. It says username or password is incorrect.
In client 001, it says "too many failed attempts and password logon no longer possible, even though that was the first time that I tried to login through GUI"
I assume that it gives this error because the installation has tried to check ddic password and failed. Let me know if there is anything else that I can do to solve this issue.
Thanks,
Jegan

Oracle BI Publisher Installation error - please help

Hi,
I am trying to install Oracle BI Publisher 10.1.3.4.1 for Windows x86... I downloaded it from Oracle website and unzipped on my local machine. When I click on setup.exe file, Oracle Universal Installer screen appear (kind of command prompt) and it check installer requirements (highlighted in bottom) and disappear automatically....nothing happen after this... no log..no error... i don't understand what happening.
If anybody knows this issue then please let me know how should i installed this oracle product
==================
Using paramFile: C:\Documents and Settings\sjaiswa\My Documents\Downloads\Oracle_Business_Intelligence_Publisher_Standalone\install\oraparam.ini
Checking installer requirements...
Checking operating system version: must be 4.0, 5.0, 5.1, 5.2 or 6.0. Actual 5.1 Passed
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
Checking Temp space: must be greater than 500 MB. Actual 278727 MB Passed
Checking swap space: must be greater than 500 MB. Actual 1024MB Passed
All installer requirements met.
===================

Thanks everyone... please ignore this post... i got answer myself. The problem was coming due to blank space between directory name. I changed temp directory location in system variable and now setup in running fine.

Premiere Pro Installation errors! Help me!

I disables my firewall, Kaspersky , I'm the administrator of my computer and I tryed "Run As Administrator". but that didn't help.
I'm using a 32-bit Windows 7.
The installation stops very close to the start and says Installation Failed
The error code:
Adobe Premiere Pro CS4
Error:
Error 1625. This installation is forbidden by system policy. Contact your system administrator.

Hi,
I'm sorry you're running into problems installing Premiere. Would you mind reposting this issue over on the Premiere forums?
Thanks,
Chris

Netweaver 2004s Preview Installation Error - Any Help Appreciated.

Trying to install the Netweaver 2004s Preview Edition.
The following error (in the log file) occurs after pointing to the Java Cryptographic Extension Policy Archive (zip) file and clicking 'next'.
===============================================
ERROR 2007-01-04 00:26:04
FJS-00003 TypeError: this._name has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 8987: ???)
ERROR 2007-01-04 00:26:21
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
===============================================
Any help is appreciated.
Rajendra.

Hi,
Drop me a mail to [email protected] I will send you the NW04s installation guide.
regards,
Ranjeet

BDS v7 Installation Error 1721 HELP!

Whenever I try to install BDS v7.1 It's giving me an error 1721. I know what it means. I tried almost everything to fix this issue, to Windows installer, DLL and etc... but i can't seem to install the software. This has never happened to me when installing a software.
This all happened after doing a complete clean uninstall with my previous BDS v7.0
This is for my Bold 9900.
Please don't reply with a external KB link telling me to read it because i've read everything.
Help me out please.

Hi and Welcome to the Community!
I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Minisap Installation error Please help

Hi,
I am trying to install Minisap 6.20 on my PC but the installation stops at 91% with the following error
Info: DBR3LICENSECREATE SyCoprocessCreate 2 718
Creating coprocess C:\MiniWAS\saplicense ...
Info: DBR3LICENSECREATE ExecuteDo 2 718
RC code form SyCoprocessWait = -112 .
Error: DBR3LICENSECREATE ExecuteCheck 2 718
Exit code from C:\MiniWAS\saplicense: -112.
Error: DBR3LICENSECREATE InternalInstallationDo 2 718
Phase failed.
Error: DBR3LICENSECREATE InstallationDo 2 718
Phase failed.
Error: Main {} 2 718
Installation aborted.
There are the things which have already been done
a. MS Loopback adapter has been configured fine
b. 10.10.0.10 <computer name > has been added in the etc\hosts file.
c. Have tried to install the Sap licence manually using SAPLICENSE -Install ( It installs ok)
d. Have tried to resume the installation too many times
f. Have disabled all security features on the PC during installation.
Not sure why this is not working, I had installed the same SW before the format on the PC. For some strange reason this refuses to work and the installation dosent go past 91%. Please help!!!
Thanks,
Poornima

Hello Every One,
Thanks for looking into this.
However the problem I solved the problem by myself.
The downloaded file is ok. Hence the md5sum mentioned in my below message is accurate. I created another administrator user in windowsXP and tried to install from that user's login.The installation was successful. And now I can access the database from both the logins (the old and the new).
I hope above will help anyone in future.
Rgds,

Os x installation errors please help

Hi i appologize from now if i posted this in the wrong place but i have looked around and cant find anything to help me out i have a 15inch macbook pro with no operating system at all. It had 10.5.7 version of operating system x but my sisters friend who is computer illeterate thought he could install 10.6 but he was wrong he ended up deleting the operating system which leaves my sister without her laptop ive tried installing 10.6 but it tells me that it cannot install then quits but every forum i go to tells me that it should work with this laptop
MacBook pro 3.1
intel core 2 duo
2.2 GHz
Number of processors: 1
Number of cores: 2
Memory: 2 gb
L2 cache: 4mb
please help i am stuck with a 1500 dollar laptop that isnt working

The installation disk I´m tryin with is from an 15-inch Macbook Pro I`ve recently bought. The system is snow leopard and I´m trying to install it in my macbook 13 Mac Os X 10.5.5 (originallay leopard) I don´t know if that´s a problem. I´m not using an update dvd. I think the problem is going by the post Mac fix it.
I read that anyone who has a macbook intel could install snow leopard so I decided to try but it´s too hard. Thanks for trying to helping us.
PD. Sorry about my english

Installation error please help me out

hi experts , i have error during installation of ecc 6.0 on mssqlserver -2005 & ms-sqlserver-2003 (64bit) the error
occure during abap import package phase error is as follows
D:\usr\sap\DTP\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 2 error(s)
D:\usr\sap\DTP\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20091224032247
IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(RFF) ERROR: invalid checksum in data file "E:\SAP ECC 6.0SR3mssql\ERPexport16\EXP3\DATA\SAPSSEXC.003"
             current table was "REPOSRC"
(DB) INFO: REPOTEXT created
(DB) INFO: REPOTEXT~0 created
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "REPOTEXT"
(SQL error 0)
(RFF) ERROR: invalid checksum in data file "E:\SAP ECC 6.0SR3mssql\ERPexport16\EXP3\DATA\SAPSSEXC.003"
             current table was "REPOSRC"
(DB) INFO: REPOTEXT created
(DB) INFO: REPOTEXT~0 created
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "REPOTEXT"
(SQL error 0)
error message returned by DbSl:
Invalid input parameter values. Check the status values for detail.
(DB) INFO: RODIR created
(DB) INFO: RODIR~0 created
(IMP) INFO: import of RODIR completed (7935 rows) #20091224030904

2 different issues here :
Issue no. 1
> IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
> (IMP) INFO: DBSL will be used
>
for this what i can suggest you is set BCP_LOB=1 in your environment to use -loadprocedure fast
Issue no.2
> (RFF) ERROR: invalid checksum in data file "E:\SAP ECC 6.0SR3mssql\ERPexport16\EXP3\DATA\SAPSSEXC.003"
>              current table was "REPOSRC"
> (DB) INFO: REPOTEXT created
>
problem in software... download software from service marketplace and try again ....or you can give a shot again by making Export path short ...
best of luck !
-Rohit

SAP BC Installation - Error - Please help

Hi Experts,
While installing SAP BC Developer (4.7 version), I am getting an error
<b>
Error: Please use an absolute path instead of C:\</b>
Any ideas on how to resolve this?
Thanks!

Hi,
Chk this link
SAP BC 4.7 Installation
Thanks
Srinivas

ERP6.0 installation error: require help

Similar Messages

Maybe you are looking for