Erro "validadation error: Table (IT_NFE_IMP)

Boa noite
Atualizamos o SP do GRC para o 15 e estamos em fase de testes. Não podemos atualizar para o 16, pois o go-live está marcado para domingo 14/11. Ainda não estamos trabalhando na versão 2.0... estamos realizando os testes para a versão 1.0
Ocorre que depois da atualização do SP e aplicação das notas referentes ao SP16 do GRC estamos tendo a mensagem de erro "validadation error: Table (IT_NFE_IMP)". O interessante é que estamosem contato com outros usuários SAP que fizeram o mesmo esquema que o nosso e não tiveram nenhum problema de validação durante os teses. Detalhe: temos uma BADI no GRC também ativada.
Alguém tem uma idéia do que pode ser??
Obs.: se eu tenho um erro de CEP para um fornecedor de importação o erro dá na mesma tabela, mas informa que é o formato do campo.
Desde já agradeço a ajuda.
Grata,
Denise

Bom dia Denise,
Mesmo que ainda não esteja trabalhando com o layout 2.0 recomendo que implemente as notas do SP16 no seu sistema.
Este erro que está enfrentando é corrigido pela SAP Note 1520853.
Veja histórico completo aqui : Problema de validação... Validation error: Table (IT_NFE_IMP) Missing entry
Atenciosamente, Fernando Da Ró

Similar Messages

ERROR TABLE INCLUSION

Hi,
I am using error table to capture the records that failed to load into the target table.
I have specified the data rules and the rule action is move to error for all the rules. Its row based generation and while executing the mapping, the error records are not getting into the error table and mapping stops when it reaches the maximum limit.
Where is the problem ? I couldnt figure out. Can anyone help ???
Thanks and Regards
Ela

OWB client version 10.2.0.1.31 and repository 10.2.0.1.0.
DB is Oracle 10g.
I specified the data rules in the object editor for the table and then specified the shadow table name. Then I dropped and recreated the table which resulted in the error table creation.

I cannot download the latest update for Adobe Muse CC. I have been directed to this formum. I have an erro message "ERROR Adobe Muse CC has encountered an error and will now exit. Please report the last few actions you took leading up to this error to th

II cannot download the latest update for Adobe Muse CC. I have been directed to this formum. I have an erro message "ERROR Adobe Muse CC has encountered an error and will now exit. Please report the last few actions you took leading up to this error to the Adobe Muse CC team. Trying to instantiate UID U4691 but lastAllocatedUID is only: 4491 OK"
I am very frustrated because Muse crashes when cannot download updatres.
I have been redirected to this forum from the 'Adobe Chat Team'
I am trying to complete a project for a client, this is the second time I have asked for help. Can anyone please help me I
I am using Windows 7. I am not sure if a response will come. I am new to forums. Do I wait or will someone contact me?
Deb Kelleher
[email protected]

Hi Deb,
Please accept my apologies for the inconvenience so far.
I am not sure if you already tried this, but in case not, try to update Muse via Creative cloud directly.
Start creative cloud application manager, if you dont have it, you can download it from here,
Adobe - Adobe Application Manager : For Windows : Adobe Application Manager
Login using your adobe id, once you are in, switch to Apps, and you should see the Update for Muse, click Update.
Let me know if you get any error or warning.
Thanks.

DML error table intermittently fails to generate error handling in package

Hi!
In OWB 11gR2 (11.2.0.1), we're seeing an issue when setting the DML Error table name on a target table. Sometimes, mostly on older and complex mappings, the error handling logic does not get generated when we deploy the mapping, and nothing is populated in the error tables for error conditions, though the errors display as warnings in the OWB UI.
When I create a new mapping that is very simple - one table loading another - setting the DML Error table name always results in errors being put in the error table. That's great, but that doesn't help us with our more-complex mappings that aren't logging errors.
We can't determine the cause of the issue. I can't see a difference in the configuration of the mappings that work and don't work. Generation Mode is All Operating Modes. Default Operating Mode is Set based fail over to row based. We've generated the error table using DBMS_ERRLOG.CREATE_ERROR_LOG. The target tables do not have primary keys.
I've tried synchronizing the target table operator in the mapping as another forum thread suggested. No change.
Has anyone else seen this issue or know of a workaround?
Thanks,
Jayce

Which logic did you talk about ?
For the version 10, you will find the error table more on the insert statement such as:
INSERT INTO "TSALES"
("PROD_ID",
"SALES"."AMOUNT_SOLD" "AMOUNT_SOLD"
FROM
"SALES" "SALES"
LOG ERRORS INTO TSALES_ERR (get_audit_detail_id) REJECT LIMIT 50;Come from here:
http://blogs.oracle.com/warehousebuilder/2007/08/set_based_errors_dml_error_log.html
Then check the insert SQL generated.
Cheers
Nico

Find error table created using DBMS_ERRLOG

Hello,
I am working on Oracle 10.2.0.5 and have a requirement to log the Error records without allowing the Load process to fail. In order to achieve this, I have decided to use the DBMS_ERRLOG functionality provided.
However, there is a catch. The application has approx. 100+ database tables, which are loaded with data received in flat files, and many of them have length nearning 30 characters.
Now, DBMS_ERRLOG, will automatically create an error table corresponding to database table, but will only consider first 25 characters. And since, many tables have similar names differing only towards the end. Hence, my question is, Is there any data dictionary view which might store the underlying database table name?
I am aware of two options to achieve this:
1. Maintain a document to reference each Error table to its database table. This being a manual approach, I am trying to avoid it.
2. Use the USER_TAB_COMMENTS, which will store the table name in comment. Although I have seen this happening, but do not see this as sure-shot approach, since I do not remember reading this anywhere in documentation.
Can anybody suggest a better approach to manage the situation?

padders answer is a good one. I do not see the problem since you can create the error log tables with names of your choosing in any schema you want. Don't let oracle name the tables. Use SQL to create the PL/SQL for all your tables based on a tag you put in the table comments or based on another table with the table names to be logged.
DBMS_ERRLOG.create_error_log
    dml_table_name      => 'real_schema.my_thirty_character_table_name',
    err_log_table_name => 'my_thirty_character_table_name',
    err_log_table_owner => 'error_schema',
    skip_unsupported    => TRUE
Table_Name
Error_Table_Name
Error_SchemaHeader
my_thirty_character_table_name
my_thirty_character_table_name
error_schema
my_short_name
my_short_name_err_log
support
With so many tables I would write a generator to create all the error log tables and the DML (insert, update or merge statements) with error logging for all the tables based on the above table and maybe put the DML in an API package that can be called from your app.

Usage of Error Table in OWB mapping

WE uses ERROR tables to take care of defective items in a maping. We want the rows in the error-table to remain and acumulate for each loading. That is, we do not want to truncate between running the mapping. We have:
Truncate table error = NO
Roll-up errors = NO
But the table is truncated between each load anyway.
Does anyone have any experience of how to make the table not to truncated?
We are using OWB 11.2.0.1
/John

Hi John
This looks to be fixed in the 11.2.0.2 OWB patch.
The bug is 9661088, otherwise you'd have to move/process the errors before re-run.
Cheers
David

How to use error table in mapping level?

Hi all
Any one please tell me how to use error table in mapping level or how to handle the errors in mapping.
I am creating one error table in oracle but i dont know how to use it in mapping.
Thanks in advance.
Kumar

Hi Kumar,
You need to use Error Table along with the Data Rule .
Error tables are used with Logical error handlers (Data Rules). Detailed description on using data rules is explained in the following document
http://www.oracle.com/technology/products/warehouse/pdf/OWB10gR2_ETLandBusinessRules.pdf
In a nut shell usage of error tables is as follows.
1. Create a data rule associate it with a table (Target table or table in which you load data).
2. Use the table in a mapping as target table.
3. Deploy the table and mapping.
Now in the target schema one more table will be created with the name <target table name>_ERR. When a mapping is executed the data which violates the data rule gets into this error table.
The following has to be done to have error table name of customers choice.
1. Right click on the table and click configure.
2. Give the table name in "shadow table name" section.
3. Deploy the table.
4. Use this table in a mapping. Now in the mapping on this table properties in "Error Table Name" section the name of the table specified in "shadow table name" will be populated.
Thanks,
Sutirtha

How to capture Field validation errors in the Error table in ODI 11g

Hello,
We are using ODI 11g (11.1.1.5) and the scenario is to read the data from a flat file (.txt) and do a bulk insert into MS SQL Server database table.
We need to capture the error records (if the source field size is greater than the target column size) into the error table. However the interface errors out at step "Loading - SrcSet0 - Load data (BULK INSERT)" with error message "SQLServer JDBC Driver][SQLServer]Bulk load data conversion error (truncation) for row 33, column 6" but these errors are not being inserted into the error table.
Is there a way to capture these errors in the error table? Below is the KM details.
LKM: LKM File to MSSQL (BULK)
CKM: CKM SQL
IKM: IKM MSSQL Incremental Update
FLOW_CONTROL is set to true for the IKM.
Thanks,
Krishna

Hello,
I had the same problem with ODI when I was trying BULK INSERT of the txt file into MS SQL. Check the cell(s) in your source file (txt) - it looks like the value in hte cell has hiding symbols: when pressing F2 tryng edit the value in the cell the coursor appared far to the right from the right end of the value. So, try to use backspace to delete the hiding symbols and verify the above. If avasrything is OK, then modify your txt file. Let me know if it works.
BTW , I've created procedure inside the MS SQL 2008R2, which BULK INSERTed records into temporary (#...) table and immediatelly, without any verification all the records were inserted into the final table in the DWH here is the statement:
if object_id('TEMPDB..#<table>','U') is not null drop table #<table>
CREATE TABLE [dbo].[#<table>]
[1] [varchar] (50) NULL,
[2] [varchar] (100) NULL,
[3] [varchar] (100) NULL,
[4] [varchar] (100) NULL,
[5] [varchar] (100) NULL,
[6] [varchar] (100) NULL,
[7] [varchar] (100) NULL,
[8] [varchar] (100) NULL,
[9] [varchar] (100) NULL,
[10] [varchar] (100) NULL,
[11] [varchar] (100) NULL
) ON [PRIMARY]
bulk INSERT #<table> FROM 'N:\<table>.txt'
with
(FIRSTROW=2,KEEPNULLS,CODEPAGE=1252,FIELDTERMINATOR='\t'
INSERT
INTO <table>
SELECT
* FROM #<table>
and it works! Let me also know if you find any other way around.
regards
Anatoli

Does "Target table" and "Error Table" need to be in same DB as OWB's?

We get the following error ORA-00600: internal error code, arguments: [opixrb-3], [1036], ORA-01036: illegal variable name/number at the time of OWB execution
OWB seems to successfully log the errors rows in the error table when a) target table and it’s b) error table are in the same database as OWB’s but throws ORA-01036 error when they are in a remote database from OWB's
Any one has any information about this please...? It will be of great help
Edited by: ghiyer on Jul 20, 2009 8:42 AM

Oracle has come back to us saying that
"DML error logging feature is not supported for distributed DML."
Bug 5698887 has more information about this.

Viewing form in Preview Mode Failed. Error: Table not found [131-183]

Hi,
I have created a user form in screen painter in SBODemo. Created UDT, UDF & Registered UDO through my SDK code.
Everything works fine.
But when i run my addon on any other DB, and open my custom form it gives an error : Table Not Found.
I have checked the UDT's , UDF's & my UDO, all are in place and getting created in the DB.
I tried checking the Form again in screen painter everything is in line. But when i try preview in screen painter it gives an error
Viewing form in Preview Mode Failed. Error: Table not found [131-183].
I can't figure out the issue, i have checked my codes & forms many times.
Regards
John

hi john smith,
Check your screen painter, probably some fields are defined without the "@" character in front.
for fields, check the "U_".
nd.Q

I am getting erro Server error 403 on the photosmart 5520.

I am getting erro Server error 403 on the photosmart 5520. I tried a couple of fixed I saw on previous forum but didn't work. I tried to reset Print scan app on the printer but it's not there

What version of OS X? How is the printer connected? If via network, what router? Have you restarted the router by pulling its power plug momentarily?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Error Table not found ODBC -2004 [melding 131-183] when opening "Open documents"

Hello, we get an error on opening the screen "Open Documents" in SAP B1 9.00
It says : Error Table ................ not found ODBC -2004 [melding 131-183]
Everytime a different table gets mentioned: OAIB - OWHT - WLS1 - CSHS.
Last time when we created a new userprofile it was gone, but now after twoo weeks this error is back.
Does anyone know how we can create a solid solution ?
Thanks in advance - Jos Dielemans

Hi,
It is an application error. Please check SAP note:
2008925 - You cannot run the Open Item List report for Purchase Requests
Thanks & Regards,
Nagarajan

Error - Table not found

Hi Guys,
Error - TABLLE NOT FOUND
We are working on discovery server which comes preconfigured from SAP.
I am able to work on the standard repositories like products available on this server for syndication and importing, but when I am trying to create the new repository I am getting the error TABLE NOT FOUND. Getting this error after entering the DBMS Server, Login Details and Repository Name and Port details.
Thanks,
MS

Hi colleagues
You should check follow:
- DBMS-user can connect to DBMS from your workstation(where you run SAP MDM Console)
- DBMS-user has premissions(grants) according to "installation guide".
- restart SAP MDM Server
- update DBMS Settings
- create new repository
Regards
Kanstantsin

More than 50 rows in an error table?

Hello All,
In OWB 10.2.0.4 we are using the Error Tables (Shadow Table) functionality. This is working fine. However, during set based loading the number of errors that is logged into the error table is determined by the mapping configuration setting "maximum number of errors". You know, the one that has a silly default value of 50. This results in a bulk insert statement that has the following additional clause:
LOG ERRORS INTO MY_ERR (get_audit_detail_id) REJECT LIMIT 50
Now, this is what I would really want is:
LOG ERRORS INTO MY_ERR (get_audit_detail_id) REJECT LIMIT UNLIMITED
This is valid SQL, but I can't get the mapping configuration property to produce this value. It only accepts (positive) numbers. Any thoughts on how to get this to work?
Regards,
Ernst-Jan

Hi Ernst-Jan
The best you can do is pick a large number. Noo way to set UNLIMITED from the UI.
Cheers
David

OWB 10.2.0.1 - Error Table

Hi All,
how can I use successfully the Error Table in a Mapping ? I have created 2 table (t_source [col_1 varchar2(10)] and t_target [col_2 varchar2(5)] ). I have configured mapping as rowbased and created with DBMS_ERRLOG.CREATE_ERROR_LOG one error table for each table.
But when i run mpaing (who discards every records ) i obtein empty error table ?!!
What can i do ?
Thanks,
Marco
Oracle 10Gr2
OWB 10.2.0.1
Unix
Message was edited by:
Marco A.
Message was edited by:
Marco A.

Hi,
I have not tried to implement what has been said in the link, this link I had got from one of the replies in this forum.
One more approach you can try
For each of the object in OWB you can create data rules. There is a set of built-in data rules and also you can create your own set of data rules.
Once you have created these data rules on the fields of the table, you can deploy this table into your target schema. In the database, an error table is created for the table object.
Now when you use this table as a target in a mapping, click over the target table operator you will find the data rules node. Expand the node corresponding to the data rules for which you want error logging and then select 'MOVE TO ERROR' as Rule action.
Deploy the target table object and the mapping and execute it. Hopefully the rejections due to rule violations should get logged into error table, if you have set the Rule Action appropriately.
HTH
-AP

Erro "validadation error: Table (IT_NFE_IMP)

Similar Messages

Maybe you are looking for