Error:0xc000000f on windows 8.1

Im having this problem with my laptop went turn no it does not goes to the windows screen.i have recovery also doesn't work it ..it this error:0xc000000f
Please help me.

This should come in handy:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03847367
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • Help! Error 0xc000000f after changing the hard drive!

    Please help. I have gone through this entire forum and NOTHING is working for me. My HP G42-303DX Notebook is only a few years old. I accidentally dropped it and apparently the harddrive broke. I purchased a new one and installed it. Forgetting that I received NO back-up or recovery discs,  I purchased the ones from the HP website. As soon as I got them, I installed it. After all recovery discs were installed I got the following error:
    ==============================================================================
    Boot Manager:
    Windows failed to start. A recent hardware of software change might be the cause. To fix the problem:
    1.Insert your Windows installation disc and restart the computer.
    2.Choose your language settings, and then click "Next".
    3.Click "Repair your computer."
    If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
    Status: 0xc000000f
    Info: The boot selection failed because a required device is inaccessible.
    ===============================================================================
    I have done ALL the testing and everything comes out as "passed". I decided to remove the final disc, but then I noticed that my notebook was not ejecting the disc. Also, I cannot boot from the disc drive. I have reset my computer hundreds of times and it will not eject it. I have pressed F10 as per the other sites, changed the boot order etc etc and I still get the same error (above) and the disc drive will not open and/or will not be recognized by the notebook.
    Stupid question to all the experts out there, but I thought the recovery discs included windows? Yes or no?
    Any help you guys can give me I would greatly appreciate it. I am desperate. Again, I have read forum after form and I still cannot fix this. My work is very strict and have blocked numerous websites, even some to pay my utility bills on. But my work computer is the only computer I have access to.
    Please help!!! I really don't want to resort to going to a tech company to get my laptop fixed.

    Hello sincityjenn,
    Welcome to the HP Forums.
    I see that you're trying to get your Notebook up and running after replacing the harddrive and are running into an error. I will try to help you with this.
    I would like you to read over this document: Looking for HP Recovery Discs or an HP USB Recovery Drive?
    This statement at the start of the document should asnwer a question you had "An HP recovery solution can be used to return a computer's software configuration to its original condition". This imply's that you already have the OS on the computer.
    What you would need is an installation disk for Windows, and to actually re-install the OS. If that doesn't work then you may actually wanna call support and run the situation by them to see what options are availible to you.
    HP Technical Support, North America 1-800-474-6836. For all other regions click here.
    http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Compaq presario C500 error 0xc000000f

    Hi all,
    i have a c500 compaq presario working well  but few days a go a got this error 0xc000000f.
    i have vista installed on my computer and now i need to reinstall windows but i don't have the dvd.
    how can i find the dvd or cd?
    thanks for answer me.
    Federica

    You can call HP to order Recovery Media for your machine>> Contact HP
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Error in installing windows 2008 r2 sp 1 element not found

    error in installing windows 2008 r2 sp 1 element not found

    Hi,
    As Akash G says, would you please let us know the complete error message or provide a screenshot? It will help
    us to go further.
    In addition, would you please let me confirm whether install the Windows Server 2008 R2 Service Pack 1 via
    Windows Update, or download the installation package and then install manually?
    Please refer to the following article and check if can help you to solve this issue.
    The error 0X80070490(Element not found) when you are installing a service pack or update
    http://blogs.technet.com/b/asiasupp/archive/2011/06/20/the-error-0x80070490-element-not-found-when-you-are-installing-a-service-pack-or-update.aspx
    By the way, you can also install the Service Pack 1 in
    Clean Boot mode manually. Then please check if install successfully.
    Hope this helps.
    Best regards,
    Justin Gu

  • When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes.  Not a fix.  Help?

    When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes.  Not a fix.  Help?

    after perusing other subjects with playback issues: 
    this is the fix: 
    -Launch Control Panel - Double click Quicktime, If you do not see quicktime, look on the top left side of control panel and switch to classic view. This will then allow you to see Quicktime.
    -Now click the advanced tab and click on Safe Mode GDI Only, Apply, then ok.

  • Error while updating window 8.1

    error code 8024402c windows update ran into a problem.

    Hi,
    Could you please have a share with the full error messages here?
    We may first take use of Windows Update Automated Troubleshooter.
    Fix Microsoft Windows Update Issues
    For the other steps, please take a check into the above article.
    Best regards
    Michael Shao
    TechNet Community Support

  • Error while using window.open() in JSP page

    I am getting error while using window.open() in my JSP page.
    This is code in my JSP page,
    <h:commandLink onclick="loadContextSensitiveHelp(#{setNewDayStatusBean. cycleStatusViewObject.helpUrl});" value="Help">
    function loadContextSensitiveHelp(helpPageName) {
    top.consoleRef=window.open('#{facesContext.externalContext.requestContextPath}/main/patient/helpPageName','myconsole',
    'width=350,height=250'
    +',menubar=0'
    +',toolbar=0'
    +',status=0'
    +',scrollbars=1'
    +',resizable=0')
    top.consoleRef.document.close()
    I am getting the following error in my browser,
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    org.apache.jasper.JasperException: /SetNewDayStatus.jsp(69,34) #{..} is not allowed in template text
         org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:40)
         org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
         org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:102)
         org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:711)
         org.apache.jasper.compiler.Node$ELExpression.accept(Node.java:935)
         org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
         org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
         org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:838)
         org.apache.jasper.compiler.Node$CustomTag.accept(Node.java:1507)
         org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
         org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
         org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2392)
         org.apache.jasper.compiler.Node$Root.accept(Node.java:489)
         org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
         org.apache.jasper.compiler.Validator.validate(Validator.java:1737)
         org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:178)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:306)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:273)
         org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:428)
         com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:444)
         com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:116)
         com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:106)
         com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
         com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:144)
         javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
    note The full stack trace of the root cause is available in the Apache Tomcat/6.0.13 logs.
    Anyone help me to solve this issue. Thanks............................

    I am getting error while using window.open() in my JSP page.
    This is code in my JSP page,
    <h:commandLink onclick="loadContextSensitiveHelp(#{setNewDayStatusBean. cycleStatusViewObject.helpUrl});" value="Help">
    function loadContextSensitiveHelp(helpPageName) {
    top.consoleRef=window.open('#{facesContext.externalContext.requestContextPath}/main/patient/helpPageName','myconsole',
    'width=350,height=250'
    +',menubar=0'
    +',toolbar=0'
    +',status=0'
    +',scrollbars=1'
    +',resizable=0')
    top.consoleRef.document.close()
    I am getting the following error in my browser,
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    org.apache.jasper.JasperException: /SetNewDayStatus.jsp(69,34) #{..} is not allowed in template text
         org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:40)
         org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
         org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:102)
         org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:711)
         org.apache.jasper.compiler.Node$ELExpression.accept(Node.java:935)
         org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
         org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
         org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:838)
         org.apache.jasper.compiler.Node$CustomTag.accept(Node.java:1507)
         org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
         org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
         org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2392)
         org.apache.jasper.compiler.Node$Root.accept(Node.java:489)
         org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
         org.apache.jasper.compiler.Validator.validate(Validator.java:1737)
         org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:178)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:306)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:273)
         org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:428)
         com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:444)
         com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:116)
         com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:106)
         com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
         com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:144)
         javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
    note The full stack trace of the root cause is available in the Apache Tomcat/6.0.13 logs.
    Anyone help me to solve this issue. Thanks............................

  • ITunes update error 7 (windows error 1114) on Windows Vista Home Premium SP2

    I have been trying to update iTunes for the past month. I admit that I had not been keeping up with the updates for about a year but now that I want to update it, I am getting an error.
    Computer: hp Pavilion dv6700 Notebook PC, Intel Core2 CPU T8100 at 2.10 GHz
    OS: Windows Vista Home Premium, Service Pack 2
    iTunes update error 7 (Windows error 1114)
    error message from Windows:
    Runtime Error!
    Program: C:\Program Files\iTunes\iTunes.exe
    R6034 Application has made an attempt to load the C Runtime Library incorrectly. Please contact applications support (that is Apples iTunes) team for information.
    I am also getting C Runtime Library error message about once a day since I tried to update iTunes.
    What do I do?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Urgent help needed on writing errors in to windows events application logs

    Hi all,
    we have web based application. Whenever there is critical errors encounters in our application we need to write that errors in to windows
    event viewer, application logs. Please help me on how to do this.
    do we have any specific API for this ?
    thanks in advance
    Shivakumar

    You should use WinAPI to do so. Asking in JNI forum (or specialized WinAPI forum) for more details is good idea I think.

  • Urgent help needed on writing errors in to windows application logs

    Hi all,
    we have web based application. Whenever there is critical errors encounters in our application we need to write that errors in to windows
    event viewer, application logs. Please help me on how to do this.
    do we have any specific API for this ?
    thanks in advance
    Shivakumar

    You should use WinAPI and followed functions: RegisterEventSource(), ReportEvent() and may be some more. It was some time ago as I deal with...

  • Installer encountered an error: 0x80096002 on windows 8.1

    hello,
    I am trying to install  Windows Installer 4.5 [windows6.0-KB942288-v2-x64] on windows 8.1 which is pre-requisite for installation of "Microsoft® SQL Server® 2008 Express with Advanced Services"
    I am getting below error while installing Windows Installer 4.5
    "Installer encountered an error: 0x80096002 on windows 8.1"
    I tried to add the feature "Windows Identity Foundation 3.5" in order to resolve the issue
    But it didn't help
    PLs assist
    Thanks
    Padol

    Hi Padol,
    Since the issue regards Widows 8.1. I will help you move  the question to the related forums at
    http://social.technet.microsoft.com/Forums/en-US/home?forum=w8itprogeneral . It is appropriate and more experts will assist you.
    Thanks for your understanding and support.
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

    The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares. 
    When the Volume Shadow Copy service was running under the context of System, this was the error logged:
    “failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
    Which is likely due to not having permissions to write to the network location. 
     This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
      Then the error changed to this:
    “failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
    HRESULT 0x8078006b
    DetailedHRESULT 0x8004230f
    ErrorMessage %%2155348075
    BackupState 12
    VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
    BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
    TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
    DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
    FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
    /></VolumeInfo>
    We aren’t really seeing anything that gives any hint on what the issue is. 
    Any ideas?  Thanks in advance!

    We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free. 
    We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there). 
      If we try another network location, we receive the exact same error. 
     This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
    Thank you for the link. 
    Looking in: 
    Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
    But it doesn’t seem to give any more details: 
    Log Name:     
    Microsoft-Windows-Backup
    Source:       
    Microsoft-Windows-Backup
    Date:         
    7/8/2013 8:00:12 PM
    Event ID:     
    5
    Task Category: None
    Level:        
    Error
    Keywords:     
    User:         
    SYSTEM
    Computer:     
    servername.edu
    Description:
    The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
    Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
    <Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
    <EventID>5</EventID>
    <Version>3</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
    <EventRecordID>30</EventRecordID>
    <Correlation />
    <Execution ProcessID="3028" ThreadID="3996" />
    <Channel>Microsoft-Windows-Backup</Channel>
    <Computer>servername.edu</Computer>
    <Security UserID="S-1-5-18" />
      </System>
      <EventData>
    <Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
    <Data Name="HRESULT">0x8078006b</Data>
    <Data Name="DetailedHRESULT">0x8004230f</Data>
    <Data Name="ErrorMessage">%%2155348075</Data>
    <Data Name="BackupState">12</Data>
    <Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
    <Data Name="BackupTarget">\\servername\BACKUP</Data>
    <Data Name="NumOfVolumes">2</Data>
    <Data Name="VolumesInfo">&lt;VolumeInfo&gt;&lt;VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
    IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /&gt;&lt;VolumeInfoItem
    Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
    NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /&gt;&lt;/VolumeInfo&gt;</Data>
    <Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
    <Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="PrepareBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="PrepareBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupWriteStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupWriteEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="DVDFormatStartTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="DVDFormatEndTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="MediaVerifyStartTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="MediaVerifyEndTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupPreviousState">2</Data>
    <Data Name="ComponentStatus">&lt;ComponentStatus&gt;&lt;/ComponentStatus&gt;</Data>
    <Data Name="ComponentInfo">&lt;ComponentInfo&gt;&lt;/ComponentInfo&gt;</Data>
    <Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SystemStateBackup">&lt;SystemState IsPresent="0" HResult="0" DetailedHResult="0" /&gt;</Data>
    <Data Name="BMR">&lt;BMR IsPresent="0" HResult="0" DetailedHResult="0" /&gt;</Data>
    <Data Name="VssFullBackup">false</Data>
    <Data Name="UserInputBMR">false</Data>
    <Data Name="UserInputSSB">false</Data>
    <Data Name="BackupSuccessLogPath">
    </Data>
    <Data Name="BackupFailureLogPath">
    </Data>
    <Data Name="EnumerateBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="EnumerateBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="PruneBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="PruneBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupFlags">0x9</Data>
    <Data Name="ComponentInfoSummary">&lt;ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /&gt;</Data>
      </EventData>
    </Event>

  • Unable to install itunes error 7 and windows error 193

    I could not update my itunes. I have Windows 7. I got an error 7 and windows error 193.
    I followed itunes Microsoft.Net fix but it did not work.
    I get a message to reinstall. Itunes is successfully installed.
    But then there is a message that I need to reinstall and error 7.

    Hi

  • Error in creating windows 8.1 VMs from templates

    hello experts,
    I have created a template on  Windows 8.1 on SCVMM 2012 R2 (OS:Windows Server 2012) ,Now am try to create a Windows 8.1 VM on another Hyper-v Host where Windows Server 2012 r2 is installed but creation has got failed with error in job list :
    Error (2915)
    The Windows Remote Management (WS-Management) service cannot process the request. The object was not found on the server (hyper-v host name .com).
    WinRM: URL: [http://hyper-v host name.com:5985], Verb: [GET], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/virtualization/v2/Scvmm_EthernetSwitchPortInternalSettingData?InstanceID=Microsoft:Definition\1f59a509-a6ba-4aba-8504-b29d542d44bb\Default]
    Unknown error (0x80338000)
    Recommended Action
    Ensure that the VMM agent is installed and running. If the error persists, restart the virtualization server (hypr-v host name.com) and then try the operation again. 
    This error can also happen due to an older version of the VMM agent on the virtualization server. Ensure that the VMM agent is upgraded to the latest version, and then try the operation again.
    please help me to resolved the issues and use created windows 8.1 templates for deploy VMs on Windows server 2012 r2 Hyper-V host.
    Regards
    Richa KM

    I am running with an idea here that the key is here:  Scvmm_EthernetSwitchPortInternalSettingData
    Your virtual port profile.  You are defining a setting that does not exist.  (I am guessing at this since the only thing is an error message).
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.
    Disclaimer: Attempting change is of your own free will.

  • I have just got this error on my Windows 8.1 PC in Adobe Premiere Elements 13:"Premiere Elements has encountered an error" -- [c:\adobe\pre\main\mediacore\mediafoundation\api\inc\Keyframe/Keyframe.h-142]

    I have just got this error on my Windows 8.1 PC in Adobe Premiere Elements 13:"Premiere Elements has encountered an error" --> [c:\adobe\pre\main\mediacore\mediafoundation\api\inc\Keyframe/Keyframe.h-142]. I have found different solution on how to fix it, but it's still hard to find where to change "," to ".". When I try to change my .prel file to a .xml it all shows symbols, letters and numbers, not only numbers like a have seen others. I have a LLOOONNNGGG movie to fix. Can anyone help?

    Hoerup
    Thanks for the update. Sorry that the news was not better.
    There are several cases of keyframe error 142 being reporting, some for version 12 and some for version 13.
    In your case, we may be able to get some help from Adobe via its Adobe Chat since you have purchased, registered, latest version
    Premiere Elements.13. Let us see what Adobe Chat can do for us. Please click on the following link
    Contact Customer Care
    Premiere Elements
    Premiere Elements
    Adobe ID, Signing In
    Adobe ID, Sign In, Account Help
    Chat Panel
    If the link does not hold its set, then you will need to navigate to Chat Panel using the above links.
    As of a moment ago, the Chat Panel was seen to be active. The titles are not ideal, but they do lead
    to an active Chat Panel. I am hoping that the representative whom you reach can answer your question more
    fully or transfer you to an Adobe group which can.
    We will be watching for further developments.
    Best wishes
    ATR

Maybe you are looking for