Error 0xE8000004 when trying to sync iphone 4S with Itunes

Hi,
I need help. When I connect my Iphone 4S on my macbook pro with I tunes I get a message saying that an unkown error 0eXE8000004 has occured and that I should try again later. I restarded my iphone, my computer, changed the 23 pin cable, changed the USB port but I always have this problem. Finally I decided to do a complete reset of my iphone but I still have the same issue.
Can someone help me?
Best regards,
Arnaud

Check this document: http://support.apple.com/kb/TS3297
The origin of this error is that you are trying to sync with the wrong version of iTunes. However, in this case it might be indicating a corrupt file. Does it always stop at the same picture? If so, try deleting the picture from the folder and syncing again.

Similar Messages

  • Error -39 when trying to sync ipod touch with itunes

    Does anyone know how to fix this??? I am trying to sync pics to my ipod touch and this is what error comes up. The error comes up when just trying to sync the ipod to itunes?? any help would be appreciated.
    Thanks

    Check this document: http://support.apple.com/kb/TS3297
    The origin of this error is that you are trying to sync with the wrong version of iTunes. However, in this case it might be indicating a corrupt file. Does it always stop at the same picture? If so, try deleting the picture from the folder and syncing again.

  • Get error message when trying to sync iphone to puter that says"cannot connect because apple mobile divise is not started? what do i do?

    get error message when trying to sync iphone to puter that says"cannot connect because apple mobile divise is not started? what do i do?

    Restart your computer and the iPhone. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.

  • Error -39 when trying to Sync iPhone (1 gen, 2.2)

    Hi All,
    A couple a days ago I started getting a *Error -39* when trying to sync my iPhone (1 gen, 2.2), any idea why is that and how do I sort it out? I've already tried rebooting my UMB and re-installing iTunes.
    Can anyone say what is the -39 referring to? Unfortunately Sir Google has no idea.
    Kind regards,
    Oskar

    Ok figured it out. Apparently I tried to sync a file that has been corrupted in some way. Clearing synchronization and setting up a new one resolved the problem.

  • "Entitlements are not valid" error message when trying to sync ipa file from iTunes to iPad

    Is anyone else getting this error message, "Entitlements are not valid",  when trying to sync .ipa file from iTunes to iPad?
    The issue I'm having is getting the ipa file that was built by the 'Adobe Flash Packager for Iphone' installed into my iPad.
    So, I have a swf file that works and was able to publish it into the Android Market.  I then compiled and build the same flash project with the Packager for Iphone into an .ipa file.  But when I try and install this .ipa file into my iPad to do my testings, i'm getting the error message. 
    I would like to test my ipa file in my iPad device before submitting it to the Apple Store.
    Any help would be appreciated. thank you.

    Developing for iphone can be amazingly complicated and frustrating.  (even before you start coding).  The process of having to create a Certificate, to approving the Certificate, to Assigning the deviceIDs to the certificate, to creating the AppIDs, to creating the provisioning profiles and then creating the .p12 file... is just too tedious. 
    I solved the problem of the "Entitlements are not valid".   The AppID i had set in the iPhone Developer Portal did not match that of the AppID i had set in the Adobe Flash CS5 -> Publish Settings.  (ie. com.yourdomainname.yourappname).  After I re-entered my AppID and compile, i was able to sync the .ipa file into my ipad. 
    I wish the error message had been a little more descriptive.  Could have saved me a whole day.
    I hope this helps others.  But my guess is, if you don't set the 40 character device ID correctly, or the email in the signingcertificate correctly, you'll get this same generic error message.

  • Error message when trying to sync iPhone 3GS.

    After updating my iPhone 3GS with the newest iOS and restoring it, I now get this message when trying to sync the iPhone 3GS
    The iPhone “iPhone” could not be synced because the sync session failed to finish. Have recently purchased 4S and need to convert.
    Will this cause problems? Thanks

    Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
    So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

  • Getting error -50 when trying to sync iphone 5 to computer

    Recently I've been getting error code -50 when trying to sync my iPhone 5 to my computer when It's plugged in via usb cable. What' is this code?

    Hello, gdesign14.  
    Thank you for visiting Apple Support Communities.  
    I understand that you are receiving an error 50 when attempting to sync your iPhone.  Try restarting your iPhone, iTunes and then attempt the sync again.  
    Restart or reset your iPhone, iPad, or iPod touch
    If the issue persists, try the troubleshooting steps in the article below.  
    iTunes: Resolve USB-related alerts
    -Jason H.  

  • Error (-50) when trying to sync iPhone 5. Everything is up to date but I can not sync! HELP!!!!

    So I try to sync my iPhone 5 to my MacBook Pro.   I store my iTune library on my external drive to save space.    I have been getting Error (-50). HELP!!!!

    Hello, gdesign14.  
    Thank you for visiting Apple Support Communities.  
    I understand that you are receiving an error 50 when attempting to sync your iPhone.  Try restarting your iPhone, iTunes and then attempt the sync again.  
    Restart or reset your iPhone, iPad, or iPod touch
    If the issue persists, try the troubleshooting steps in the article below.  
    iTunes: Resolve USB-related alerts
    -Jason H.  

  • TS3694 error code1140 when trying to sync. my devices on itunes

    I keep getting an error code 1140 when trying to sync. my iphone or ipods to itunes .Can anyone help with this problem

    Download and install the iPhoto 9.4.1 update, which was just released today. It may be the answer to your problems:
    http://support.apple.com/kb/DL1598

  • Does anyone get failure EXC_BAD_ACCESS (SIGBUS) when trying to Sync your Ipad with Itunes ?

    Hello,
    I encounter a problem when trying to sync my iPad.
    The problem occurs after a few seconds when syncing and after that everytime when trying to open iTunes.
    I did not install anything in particular and have still over 20gb of free space on my hard disk.
    The first lines of the error message are displayed below.
    I have tried everything I found on the internet (such as deleting a specific font in my font library), but nothing really made the error disappear.
    Did anyone encounter the same problem and got rid of it ?
    thanks in advance,
    mathieu
    Process:         iTunes [2096]
    Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
    Identifier:      com.apple.iTunes
    Version:         11.0.4 (11.0.4)
    Build Info:      iTunes-1104004001000000~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [92]
    Date/Time:       2013-08-04 18:42:31.452 +0200
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          70280 sec
    Crashes Since Last Report:           54
    Per-App Interval Since Last Report:  13023 sec
    Per-App Crashes Since Last Report:   54
    Anonymous UUID:                      189400FA-CFC7-497D-BE9C-E3D180862647
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: 0x000000000000000a, 0x0000000020a33000
    Crashed Thread:  16
    Thread 0:  Dispatch queue: com.apple.main-thread
    0   libSystem.B.dylib                       0x95e49afa mach_msg_trap + 10
    1   libSystem.B.dylib                       0x95e4a267 mach_msg + 68
    2   com.apple.CoreFoundation                0x916e32df __CFRunLoopRun + 2079
    3   com.apple.CoreFoundation                0x916e23c4 CFRunLoopRunSpecific + 452
    4   com.apple.CoreFoundation                0x916e21f1 CFRunLoopRunInMode + 97
    5   com.apple.HIToolbox                     0x9759de04 RunCurrentEventLoopInMode + 392
    6   com.apple.HIToolbox                     0x9759dbb9 ReceiveNextEventCommon + 354
    7   com.apple.HIToolbox                     0x9759da3e BlockUntilNextEventMatchingListInMode + 81
    8   com.apple.AppKit                        0x968d7595 _DPSNextEvent + 847
    9   com.apple.AppKit                        0x968d6dd6 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 156
    10  com.apple.AppKit                        0x968991f3 -[NSApplication run] + 821
    11  com.apple.iTunes                        0x0017d76f 0x1000 + 1558383
    12  com.apple.iTunes                        0x0017d5e9 0x1000 + 1557993

    I have the same problem recently.
    I emailed them, and a tech/support person emailed me back and told me it was a potential third party app causing it.
    She said if you have any: web accelerators, firewall, or other stuff running it would cause it, but I tried to disable and unistall programs and still the same problem.
    Also I tried to uninstall and start fresh and same deal, even with a new stand alone version, same problem.
    I keep getting a bad kernel error when it crashes, check out here:
    Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000096
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
    And I have no idea how to fix? Can anyone help?
    

Wes

  • ITunes Unknown error (-53) when trying to sync iPhone in Windows 7

    I've done a bit of googling and didn't find anything that helped.
    I have tried:
    - resetting the iPhone
    - rebooting the OS
    - the disabling power save on the USB
    - installing a new version of iTunes (9.0.3.15)
    - installing iTunes over itself (9.0.3.15)
    - installing an older version of iTunes (9.0.0.70)
    The error occurs at the last stage, where iTunes says " Syncing "iPhone <name>" ".
    Phone was previously sync'd with my iTunes in XP before going to 7. I did choose to sync only with the new 7 system.
    The phone charges fine, and I can pull pictures off of it via Windows.
    Ideas?
    Message was edited by: jollyman78

    Jollyman,
    to sync your photos, you have a few options.
    If you have your TOP iTunes page set to "automatically" sync when logged on, it will search for the photos folder in your iTunes folder on your PC. If you have nothing in there, nothing will come out and whatever is already on your device will be synced to 'nothing' in you folder.
    I find it more useful to checkmark on the top iTunes page "manage music and photos manually". This will give you a little bit more control of where and which photos/in which folder on your PC you wish to update/sync.
    Once you've checkmarked it, you'll see a pop-up..."are you sure etc...it will erase blah blah blah". Click YES and APPLY (important).
    Now when you click in the left sidebar on your device's name (iPod, iPhone...whatever), click on the icon itself to take you to your device's homepage. In the top menu choose PHOTOS and choose in the dropdown menu the folder where you wish to keep ALL your pics/320x480-Images/Photos/ETC. that you have made your DESTINATION folder for UPDATES. This is important, because every time you'll sync your hardware, iTunes will search for that folder to locate any new updates/additions to that folder and considers it an update/sync. So make sure you always have ALL the things in that folder that you wish to see on your iPhone/iPod or whatever you are trying to update/sync.

  • TS4062 I am getting error msg when trying to sync-iPhone could not sync because the sync session failed

    I am trying to sync my iPhone and receiving the following message:  iPhone could not sync because the sync session failed
    I have tried walking through the set ups again, and cannot figure this out.  Any help out there?  Thank you.

    I seemed to have figured it out...... I hard reset my Iphone and rebooted my computer and it seemed to work. It also seemed there was a music file that was not being recognized, I just erased it and everything worked fine after that.... very strange but I am so glad I figured it out.....

  • Empty error dialog when trying to sync (Windows 7 x64 + itunes 9)

    Using Windows 7 Enterprise, 64bit and the latest x64 installer of iTunes (9.0.2.25) on a HP EliteBook 8530w.
    Whenever I open iTunes, click on my iPhone (3G) and then select the "Info" tab I get an empty error dialogs popping up: See screenshot http://img214.imageshack.us/img214/1582/ituneserror.png
    This dialog pops up a couple of times, one after the other. After I've dismissed them all, I can click sync and it appears to actually sync (both the phone and itunes tells me it's synchronizing). However, the empty dialog appears again during sync and once the sync has completed there hasn't been any changes to the phone
    What I'm trying to sync is calendar and contacts from MS Outlook 2007. It used to work perfectly on this same computer running XP... it all happened after I re-installed the OS and upgraded to Win7.
    I've searched through the internet and found various references to sync problems on vista/win7 on x64 although non of the symptoms seems to match mine (others were seeing bluescreens, frozen itunes etc.). Also, given the verbosity of the error dialog, it's quite hard to know what's wrong...
    Has anyone even seen this problem or am I alone with this?

    I was finally able to make it work. I'm so happy.
    For some reason, perhaps it was pure desperation or maybe I had read it somewhere on the internet, I decided to set Outlook as my default mail application. Unbelievably, this made it work - the empty error boxes are gone and synchronization works like a charm.
    So, when Outlook asks if it should be default mailer, answer yes. You can also configure this in Outlook or in the Windows 7 start menu -> Default Programs -> Set your default programs -> Outlook.
    Just make sure that Outlook is default for everything it wants to be default to. My first attempt set it to "11 out of 13" and it wasn't until I selected to use it to "all file types and protocols that it can handle to default".
    Anyway, I'm a happy user now and hopefully this can help others who are experiencing the same issues

  • Why do I get an error message when trying to sync my ipads with my imac

    We have two ipads - version 2 I think - the last ones with the old style plug.  Both are running IOS 7.1.1  Over the last week, every time I try to sync either ipad with my imac (27" - about 18 months old) which is running OSX 10.9.2 I get the following error message.  "The Ipad cannot be synced. An unknown error has occurred (1723)"  In every case it takes a while for the error message to appear - the sync gives every impression of rolling along just fine through the various steps - when it reaches step 5 of 6 (syncing photos) it seems to hang up, then after a while the error message shows up. 
    Interestingly, there are no photos on the ipad, so nothing to sync to the imac, but I discovered all of this when I tried to sync some photos in the other direction, from iphoto to one of the ipads. All I got was the pin wheel of death. I am running the most current version of iphoto too.
    Any suggestions on how to fix this would be gratefully accepted.

    Can you create a test Project in PrE 9 and does that work. If so, close that Project and then Open it again in PrE 9.
    It could be as simple as your PrE 8 Projects just not Opening in PrE 9. There is often forward compatibility, but not always. It is usually best to finish Projects in the version, in which they were started.
    Good luck,
    Hunt

  • Empty error dialog when trying to sync (Windows 7 x64 + itunes 9 and 10)

    This post:http://discussions.apple.com/thread.jspa?messageID=11692653 describes my problem, but their solution did not work for me (setting Outlook as defauylt and use iTunes 9.2.0.61).
    Basically what happens is that every 10 minutes or so, an error box (empty) will pop up - I have auto sync enabled. Switching to manual will stop it of course, but when I manually sync the error occurs. What is strange is that as far as I can tell, my data IS syncing to Mobile Me. It's like the error ocurs regardless.
    Any other ideas on how to fix this?
    Details: Windows 7 64bit, iTunes 10 (tried 9.2.0.61), 8 GB RAM, 1TB HDD RAID 0, 2 drives 500GB each - Apple updates run weekly.

    I was finally able to make it work. I'm so happy.
    For some reason, perhaps it was pure desperation or maybe I had read it somewhere on the internet, I decided to set Outlook as my default mail application. Unbelievably, this made it work - the empty error boxes are gone and synchronization works like a charm.
    So, when Outlook asks if it should be default mailer, answer yes. You can also configure this in Outlook or in the Windows 7 start menu -> Default Programs -> Set your default programs -> Outlook.
    Just make sure that Outlook is default for everything it wants to be default to. My first attempt set it to "11 out of 13" and it wasn't until I selected to use it to "all file types and protocols that it can handle to default".
    Anyway, I'm a happy user now and hopefully this can help others who are experiencing the same issues

Maybe you are looking for

  • Video newbie needs help with multicam editing

    Hi all, My video editing experience is limited to a few iMovie projects, which you can view on YT (search for TheChampsTube).  For our final gig we did a 3 camera shoot, which was supposed to be produced by the videographer.  But he dropped the ball,

  • Flash Crashes on clicking import to stage

    I'm having an issue with a blank open document, clicking on 'import to stage' will crash the program or clicking on 'import to library' will crash the program.  I have tried uninstalling CS4 and re-installing CS4. The problem remains the same. Any id

  • Completion indicator vs. liquidating a funds reservation

    Hi all, Can someone clearly explain what the difference between liquidating a funds reservation versus marking the completion indicator or completing a funds reservation is? How does one liquidate a funds reservation? FMRE_SERLK or FMX6? fmz6? Finall

  • Photoshop photography program for PS CS4; CS5; CS6 users where  is it? 9,99/month

    Hi, I can´t find anymore the offer ADOBE made somewhere in September for existing Photoshop users. 9,99 Euros/month period. The offer was anounced for a period until 31st December 2013. Where is it? Has anybody a link? I can´t believe that Adobe buri

  • Port mirroring with ALOT of Drops Tx on a 5406zl

    Hi everybody. My first post here and I'm convinced that the questions I have will be easily answered by several of the true experts that reside here in the forum. Question #1. I've set up port mirroring this way on my HP procurve J8697A Switch 5406zl