Error 10401 occurred at AI Hardware Config, when using AI Acquire Waveform vi

I can successfully run applications that use the AI Sample Channel vi, however when I use the AI Acquire Waveform vi the following errors are generated:-
Error -10401 occurred at AI Hardware Config, followed by
Error -10401 occurred at AI SingleScan.
All applications have been developed using Labview 6.0.2, on an NT machine.  The applications are then run (or atleast attempted to be run) using the Labview Run-Time Engine on a different NT machine.
The driver software I am using is the NI-DAQ Native Data Acquisition Driver Software Version 6.1.

Hi,
I've found a Knowledge Base on the NI website describing some situations where this problem occurs:
http://digital.ni.com/public.nsf/websearch/46F78EDD19BA0CC386256CEE007201FC?OpenDocument
That error code is generally seen when something has changed in the DAQ card's configuration, or the drivers are not installed properly. It's strange that this is showing up only on certain functions for your application.
Also try having a look through the DAQ troubleshooting pages on the website:
http://www.ni.com/support/daq/
Regards,
Mark Lee
National Instruments

Similar Messages

  • 'Error -10401 Occurred at AI Clock Config' When Running Certain Examples ...

    I tried following the suggestion given earlier on the website link http://digital.ni.com/public.nsf/3efedde4322fef198​62567740067f3cc/50f8faa83c79f07f862569f90041855b?O​penDocument
    So I changed the Channel A to 0 and Channel B to 1, but still get the same error. I am doing a VI on my own that is getting the same error so I am very confused.

    Hello;
    I don't have detail on what exactly you are trying to accomplish there.
    Can you give me more details such as what board you are using, what you need to accomplish, etc?
    Meanwhile, the error -10401 occurs if you are trying to address a device that is not present. If MAX cannot see the DAQ card or you have changed the device number of the card, you will get this error. So, I recommend you first use MAX to do basic testing with the board, and check if the device number you are setting at the LV VI corresponds to the device number MAX assigned to that board.
    Hope this helps.
    Filipe

  • Error -10401 occurred at AI Group Config - in relation to USB-6008

    I'm attempting to run a simple vi that uses AI Aquire Waveforms.vi to input voltage data that I have coming in from the USB-6008 DAQ.  However, when I try running the program, I receive the error:
    Error -10401 occurred at AI Group Config
    Possible reason(s):
    NI-DAQ LV:  The specified device is not a National Instruments product, the driver does not support the device (for example, the driver was released before the device was supported), or the device has not been configured using the Measurement & Automation Explorer.
    And I'm not sure how to fix it.  In MAX, the device seems to be working properly and everyhting seems to work fine in the test panel, so I'm slightly at a loss.  I'm running Labview 7.1, and installed NI-DAQmx 7.5 which came with the USB-6008.

    Never mind.  I'm new to Labview, and didn't realize that I could not use the traditonal Data Aquisition components with the USB-5008 (I didn't even realize that NI-Daqmx was different).

  • Help with Error -10401 occurred at AO Group Config

    I am receiving the error: "Error -10401 occurred at AO Group Config" and have been unable to fix it. 
    Some background: This is someone else's program who has since left, so I am not very familiar with it. It was running fine a little while ago, until the PCI-GPIB card broke.  We got a new GPIB card (essentially the exact same model; the old one was 183619B-01; the new one is 183617K-01) and now this error appears every time I try to run it. 
    I believe this is being thrown by the "AO Config.vi" in my VI Hierarchy.  From reading other forums, such as this: http://digital.ni.com/public.nsf/allkb/46F78EDD19BA0CC386256CEE007201FC and this: http://forums.ni.com/t5/LabVIEW/Change-in-PCI-Device-Number/m-p/2312186#M726679, it seems it may be a problem with properly assigning device numbers.  (The new GPIB card  may have been assigned a new device number while the program is calling the old one).  However, the solution offered is to right-click on the device in MAX and change the device number, but when I right-click I am not given that option (see attached image). On the other hand, it could also be some sort of driver problem.  
    I am running LabVIEW 8.2.1 and Measurement and Automation Explorer 4.2.1.3001 on Windows XP SP2.  Any help is greatly appreciated.  
    Attachments:
    error.PNG ‏89 KB
    right click.PNG ‏77 KB
    hierarchy.PNG ‏94 KB

    Hi bh424,
    I would make sure that you have updated drivers as you mentioned. If you are using TDAQ make sure to reset the device driver mentioned in the KB you listed.
    Another thought would to be to remove and readd the device in MAX to refresh it, and potentially change the naming in your program to reference a new named device. If you cannot rename the device in MAX you could look at repointing the device in your code.
    Are you able to communicate with the device at all in MAX through simple queries? From the right click screenshot it looks like *IDN did not communicate properly.
    Have you also refreshed the list or rebooted your machine?
    http://digital.ni.com/public.nsf/allkb/23B5918E5604915B86256C2B005F4D70?OpenDocument
    I would first ensure you can communicate with the new card in MAX alone. Here are some troublehsooting steps if that is not the case:
    http://digital.ni.com/public.nsf/allkb/A80DBFCCAC36EBDE862562C80058856E?OpenDocument
    There is also the possibility that the card is broken as well. If it was indeed purchased from a 3rd party vendor, there is less we know about the card or what could have been done to it before you acquired it.
    Regards,
    James W.
    Applications Engineer
    National Instruments

  • Error has occured please try again later when using youtube

    I have reinstalled the flash plugin numerous times and it fixes the issue for a short while then it comes back. I am not sure what else I can do to fix this. Its very annoying. I see there is something about cookies with this issues but not sure how to do that fix. I watch a lot of youtube videos and I am going to have to resort to using google chrome instead of FF.

    Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Press and hold Shift and left-click the Reload button.
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I obtain error -10003 from AI hardware config when I use AC coupling

    I am using a function generator to make a sine wave and I want to obtain the data. However, there is an error 10003 at AI hardware config when I use AC coupling and I am not sure why?
    Attachments:
    Motor_Current_Measurement2.vi ‏133 KB

    What model DAQ board are you using. There's only a couple from NI that support AC coupling.

  • The error "-10401" occurred in the current database connection "LCA"

    Hi everyone,
    I installed livecache 7.7 with scm7.0,when i did postinstallation  Initialization or run t-code lca03,i got error dump as below.now the livecache states is good.in scm server I not installed package Lcapps.please help give your advise,thank you so much.
    untime Errors         DBIF_DSQL2_SQL_ERROR
    xception              CX_SY_NATIVE_SQL_ERROR
    ate and Time          01/20/2010 03:26:32
    Short text
        An SQL error occurred when executing Native SQL.
    What happened?
        The error "-10401" occurred in the current database connection "LCA".
    How to correct the error
        Database error text........: "Conversion of parameter/column (1) would tru
         data"
        Database error code........: "-10401"
        Triggering SQL statement...: "EXECUTE PROCEDURE "APS_PLAN_VERSION_GET""
        Internal call code.........: "[DBDS/NEW DSQL]"
        Please check the entries in the system log (Transaction SM21).
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:

    Hi Natalia,
    thanks for you much help,the livecache version is 7.7.02,so I will try to upgrade to 7.7.04,thank you.
    Server Utilities    d:/sapdb/programs      7.7.02.08     64 bit    valid
    DB Analyzer         d:/sapdb/programs      7.7.02.08     64 bit    valid
    PCR 7301            d:/sapdb/programs      7.3.01.21               valid
    PCR 7500            d:/sapdb/programs      7.5.00.42     64 bit    valid
    SAP Utilities       d:/sapdb/programs      7.7.02.08     64 bit    valid
    APO LC APPS         d:/sapdb/k1p/db/sap    6.00.004      64 bit    valid
    Base                d:/sapdb/programs      7.7.02.08     64 bit    valid
    Redist Python       d:/sapdb/programs      7.7.02.08     64 bit    valid
    JDBC                d:/sapdb/programs      7.6.03.02               valid
    Messages            d:/sapdb/programs      MSG 0.5010              valid
    ODBC                d:/sapdb/programs      7.7.02.08     64 bit    valid
    SQLDBC 77           d:/sapdb/programs      7.7.02.08     64 bit    valid
    Database Kernel     d:/sapdb/k1p/db        7.7.02.08     64 bit    valid
    Loader              d:/sapdb/programs      7.7.02.08     64 bit    valid
    SQLDBC              d:/sapdb/programs      7.7.02.08     64 bit    valid
    Fastload API        d:/sapdb/programs      7.7.02.08     64 bit    valid
    SQLDBC 76           d:/sapdb/programs      7.6.01.15     64 bit    valid

  • Application error 0xc0000409 occured at location 0x004120cb comes when click on pdf

    application error 0xc0000409 occured at location 0x004120cb comes when click on pdf
    I have installed Foxit as well as Adobe XI.
    PC is XP, SP3

    This forum is only to discus the forums themselves or to comment on them.
    Try the Adobe Reader forum:
    http://forums.adobe.com/community/adobe_reader_forums

  • Why do videos embedded in facebook and livejournal posts say "an error has occurred, please try again later" when I click on them?

    Videos embedded in facebook and livejournal posts say "an error has occurred, please try again later" when I click on them. (This doesn't happen in Internet Explorer.) I have the latest flash player, and the only firewall in use is Windows Firewall. Popups are blocked.

    mgpainter wrote :
    prince2012 wrote:
    Hi mgpainter
    Welcome to the Community
    Sorry I am not a RIM employee, But still regarding your problem have a look at this RIM Knowledge Base to resolve the error .Try it and see if it resolves your problem : KB25882 .
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Thanks for the welcome and the reply!
    I looked at KB25882 and my settings are good, so that didn't help.
    I had this problem over a year ago, and someone at RIM found a bit set that shouldn't have been set and fixed it (that is my terminology for what happened).
    I am really looking for a way to contact RIM directly.  I hate going through the mill with my carrier to get it escalated to RIM for resolution......  <sigh>
    Hi mgpainter 
                                Most easiest way to Contact RIM is through your Carrier but as you don't prefer that than there is another way of support called Incident Based Support but just want to inform you that its not free.If you want have a try  BlackBerry Incident Based Support .
    Good Luck
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • [Forum FAQ] Troubleshooting "An error has occurred during report processing" message when viewing SCCM reports

    Symptom:
    When you view a report with SCCM, you may encounter the following error message:
    An error has occurred during report processing.
    Under the details box, you can see the detailed error information as below:
    System.Web.Services.Protocols.SoapException: The report server has encountered a configuration error. Logon failed for the unattended
    execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. Logon failed for the unattended execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException:
    Log on failed. Ensure the user name and password are correct. ---> System.ComponentModel.Win32Exception: The user name or password is incorrect
    at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
    at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
    Figure 1 is the screenshot of the error message in SCCM:
    Figure 1.
    Cause:
    According to the detailed error message, it indicates that “The report server has encountered a configuration error. Logon failed for the unattended execution account.”
    and “The user name or password is incorrect”, so this issue would be caused by the mismatched credential stored in report server.
    Solution:
    To solve this issue, you can follow the steps below:
      1.
    Access Report Manager URL on your reporting server.
    From figure 2, you can see that the URL for Report Manager is
    http://SCCM:80/Reports
    in our lab environment. You can check your Report Manager URL in Reporting Services Configuration Manager.
    Figure 2.
      2.
    Find out the date source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} and access it.
    Figure 3.
    3. Test connection (Figure 4)
    You can have a test connection to check whether the credentials stored in the report server are correct or not.
    Figure 4.
    4.
    Modify the password or choose another authentication method
    If you want to change the password, please make sure that password is the same as the one that you have set for that user account in the domain.
    5. Confirm connection
    After you change the password, you can test connection again. From figure 5, we can see that connection created successfully.
    Figure 5.
    After all the steps above, there is no error message when viewing the report. (Figure 6)
    Figure 6.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    ok . the user name is sccm.admin this user have the assignment to run as a services, he is a domain admin, on the sql server this user have the sysadmin, i create the reporting with the Reporting Services Configuration Manager, and on the Database i use
    the sccm.admin to create the new database, on the Service Account i use sccm.admin user, also this user have local administrator on the SCCM server, + i give him the dbreader on All the database on the SCCM server witch it also the SQL server, i add the sccm.admin
    on the reporting web the system role and check the all settings give him full permissions
    do i make my self clear ? (my English is not so bright )
    now from the SCCM 2012 console , some reports run perfectly, and some run and trow this error at me
    Microsoft.Reporting.WinForms.ReportServerException
    An error has occurred during report processing. (rsProcessingAborted)
    Stack Trace:
       at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
       at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
       at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
       at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
       at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
       at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
    this poor gay have the same problem
    An error has occurred during report processing. (rsProcessingAborted)

  • AN ERROR MESSAGE KEEPS POPPING UP IN MY CREATIVE CLOUD SAYING AN ERROR HAS OCCURED PLEASE TRY AGAIN. WHEN I TRY AGAIN THE MESSAGE STILL POPS UP.

    I am getting an error message popping up on my creative cloud stating that an error has occurred in downloading please try again. When I try again the message pops up again.
    What do you think the problem might be?

    AppMom if you are consistently receiving a download error then it is likely there is problems with your download.  Please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for more details on how to resolve download errors.

  • File error for improperly inserted or defective desk when using Word with text boxes PLEASE HELP!

    When I have a Word document opened that contains around 10 text boxes, I get..."A file error has occurred. Check your network connections or make sure the disk is properly inserted and not defective" causing the program to either quit automatically or freeze and require me to manually shut my computer down. This will occur about every 15 minutes and only when I am on a document with numerous text boxes. Also, I do copy and paste the text boxes from file to file and change the text accordingly.
    Operating System - Mac OSX 10.8.5
    Microsoft Word 2011 - Version 14.4.5
    File sizes - around 190 KB
    I have turned off track changes and smart cut and paste options, checked for duplicate fonts (none), verified both the Macintosh HD and Apple HDD Media disks (both said the disks were fine so I did not repair either). My husband mentioned something about allocating the working memory space of Word but not sure how that is done (and he is on Team PC ). PLEASE HELP!!!

    CPie wrote:
    o..k.
    I see that you have run out of helpfulness for this session, What the ....? I just told you to add your jtextfield to a jpanel or some other visible component to be seen.
    it is getting late here I will take my business elsewhere tomorrow rather than waiting up for a response which shows you realllly need to find something better to do! And thanks for the help earlier. That was actually useful whereas this wasn't, I'm sure you knew that already,You know that we are all volunteers here. Any time spent here helping you is time away from our friends and families. A little more appreciation is definitely in order or go somewhere else and pay for your help.

  • Error in Agilent 2k3k4k X-Series drivers when using examples that contains "read waveforms.​vi"

    Hi, all
    Something goes wrong when using agilent 2k3k4k drivers. Could anyone help me?
    Agilent DSO-X 2012A oscilloscope
    Drivers are download from:
    http://sine.ni.com/apps/utf8/niid_web_display.down​load_page?p_id_guid=9E84674573AF6AB8E0440021287E6A​...
    Each time when running examples:
    Agilent 2000 3000 X-Series Acquire Waveform.vi
    Agilent 2000 3000 X-Series Acquire Waveform continuously.vi
    Agilent 2000 3000 X-Series Acquire Multiple Waveform.vi
    Errors rise and the oscilloscope is crashed and needed to be shut down and restarted. It seems that the example can't pass the "Read Waveforms.vi" in the Block Diagram. The PrintScreen   is as follows:

    sagha wrote:
    According to the MAX they are correct (IVI driver for the Agilent 33519B downloaded from the NI website). When I run the IVI Initialize block any frequency, amplitude, offset, etc. settings on the function generator are reset to the default values. So, something is being sent to the instrument.
    However, I've also tried adding the General Error Handler block right after the Initializaiton block to cancel the -1073807339 error. Then, I add the IviFgen Configure Standard Waveform [STD] block to set the function generator frequency. The program throws an error that looks like a resource problem:
    "Error -1074130544 occurred at IviFgen IVI Error Converter.vi
    Possible reason(s):
    The session handle is not valid.
    Complete call chain:
        IviFgen IVI Error Converter.vi
        IviFgen Configure Standard Waveform [STD].vi
        <myViName.vi>
    What could be the reason for an invalid session handle? I've followed the NI tutorials on setting up IVI instruments in MAX and in LabVIEW.
    Okay, this is new information.  Nothing in your previous posts mention that the initialztion did anything at all besides return the timeout error.  The invalid session handle is because you closed the session.
    I'm having trouble following your descriptions.
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • Sync Error "An error has occurred please try again" with Contacts using Desktop Manager

    Hello,
    I've been trying to fix my Boss's sync issue for sometime. I hope some one can help.
    He has a BB Curve
    He uses Microsoft Entourage 2008 sync'd with Mac's Address Book
    His desktop manager is up to date
    When syncing contacts he gets "An error has occurred please try again"
    I went under advanced settings and click replace everything on blackberry device. That worked and his phone is now up to date with his address book however if you don't click "Replace.." the error still occurs.
    He fusterated because he wants to be able to sync back and forth not just from his computer to his phone. I hope this all makes sense and someone can help.
    Thank you

    demzi11 wrote:
    I have the same thing! I have no idea how to fix it
    Hi and Welcome to the Forums!
    Read the KB that Xandrex linked...it cures this situation in something like 75% of the time.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Hardware conflict when using ipod mini

    well this is something i have found out so hope it helps any one else.
    some USB ports won't work on some new machines (computers) when a copper jet DSL modem is installed.(this is the model i have and is a few years old) it causes the ipod to malfunction or not be reconised.
    when the copper jet modem is removed the ipod works fine. this as enabled two ipods with exclamation mark previously unable to reset, to now work fine with out problems.
    I don't know if it was just luck so if any one else has the exclamation mark try this and post whether it worked or not.
    hope this helps

    Do I have to authorize my laptop to be able to use iTunes and my ipod on it?
    Yes, to play iTunes purchased music, you'll need to authorize your laptop. You can authorize up to 5 computers at a time.
    So will this authorization screw these songs up?
    No, it will not affect them at all.
    can I leave my ipod in automatic mode or should I change it to manual mode when using two pcs?
    You need to use manual mode if you want to use your iPod with multiple computers. Neither computer can be in Automatic Sync mode.
    This article should explain how to use the iPod with multiple computers:
    http://docs.info.apple.com/article.html?artnum=61675

Maybe you are looking for

  • Pictures taken with the instant camera short cut on the iPod touch 4G do not show up in the camera roll

    My girlfriend has an iPod touch 4G.  She recently installed iOS 5 and is now having problems with the camera.  When she takes a picture after launching the camera from the lock screen, the photo never appears in her camera roll.  The photo appears in

  • Request is successfully but datarecords are not loaded into the InfoCube

    Hai Im loading the data into the 0PUR_C01 from the two datasources 2LIS_02_ITM and 2LIS_02_SCL. First im trying to  load the data from the 2LIS_02_ITM int the InfoCube 0PUR_C01. Then request is loaded successfully and im getting the reporting symbol

  • How to restore keychain?

    I was having problems logging into my iMac after sleep (I enter a password after a set interval), so it was suggested I reset my default keychain. That worked, but now all my Transmit passwords are gone. The message when I reset says "Your current de

  • Confirmation of delivery via EDI (SHPCON) incl. actual pick quantity & GI

    My client makes use of a logistics service provider. Based on the delivery a dispatch order is sent (SHPORD) Idoc type DELVRY03. The logistics service provider receives the dispatch order, picks the materials and confirms the actual picked quantities

  • Classic Environment and Tiger

    Hello, all. I installed Tiger about a month ago. (I was previously on 10.2.8.) Ever since then, I can't open any OS 9 applications. When I try to open one, I get this message: "Classic needs to update files in System Folder on Macintosh HD. These fil