Error 1047 w/ Labview 8.20: Labview failed to send variable to the script server

Hello,
I have found similar questions, but with previous versions of Labview and Matlab and no resolution. Could someone please enlighten me? I'm using Matlab 7.4.0 (2007a) and Labview 8.2 and this is the error I get when I try to input a 1D array into a matlab script node.
Thank you much.
Message Edited by johng3 on 02-11-2008 01:20 PM

Hello Johng3,
Regarding error 1048 you are getting, please refer to this knowledgebase, which explains why this happens.
Eli S.
National Instruments
Applications Engineer

Similar Messages

  • Error 1047 in LabVIEW 8.2: LabVIEW failed to send variable to the script server. Server:""

    I am working with the evaluation version of labVIEW as well and I have run into another error.  I am using a MATLAB script node within a for loop and attempting to pass the for loop counter variable into the script.  When I run the code it brings up a 1047 error and says "LabVIEW failed to send variable to the script server. Server:"" ".  I looked up the error online which seems to have roots in a failed auto initialization of MATLAB.  Is there something that I can do in labVIEW to fix the problem or is it strictly a MATLAB error?  
    I really appreciate your help.

    I'm using Labview 8.6 and Matlab 7.9 2009b on windows 7 (64bit)
    when I tried to open the Lorenz Diff Eq.vi....it woes not work and gives the error
    Error 1047 occurred at LabVIEW:  LabVIEW failed to send variable to the script server. Server:"" in MATLAB script node - Lorenz Diff Eq.vi
    I think there is no inital communication for opening the MATLAB server
     any can help?
    A.Hakim

  • LabVIEW FPGA was unable to contact the Compile Server at "localhost" on port 96.

    Hi,
    The following error occured when i am trying to compile my design on labview fpga 8.6, and the error reads as follows.
    "LabVIEW FPGA was unable to contact the Compile Server at "localhost" on port 96. The server name or port may be incorrect, a firewall may be blocking communications with the server, or the configured timeout may be too low. You may reconfigure Compile Settings by clicking the Configure button or try contacting the Compile Server again by clicking the Retry button. Click the Cancel button to abort." 
    Can ane one help me in sorting out this error.,
    Regards
    KalyanSuman KV 

    This should solve it

  • Error: Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.

    Hello,
    I have a lightswitch web-application in development, which I need to copy from one computer to the other. I have tried doing it both through Git and by simply copying the solution and opening the project on another machine. The project builds without errors,
    but when I try to debug it, it opens a web-browser, loads to 100% and pops up an error - Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.
    Now, I have tried repairing Visual Studio on my machine, reinstalling .NET framework and setting  <basicAuthentication enabled="false" /> in web.config, yet it still does not run.
    When using Fiddler, it shows an error while loading the application - "HTTP/1.1 500 Internal Server Error" , which I honestly don't know what it means.
    The application uses ComponentOne and Telerik modules, but they are both installed on both machines. 
    The application does run perfectly on the original machine, but it is not working on any other one.
    Both machines are using Win 8.1 and Visual Studio 2013 Update 4.
    I have tried to look this up online, but most people's problem are when they are deploying the app, not just debugging. I would be really happy for any help with this issue.
    Thanks!

    I have the same problem on one of my development machines. Whenever I create a new project, the System.IdentityModel.Tokens.Jwt nuget package is not referenced properly. The project compiles correctly but you are not able to debug as I get the same error
    as you.
    If you open up your references and there is an error next to any of your references make sure that you correct them. In the case of the jwt reference error, I have to remove the jwt reference and then add it back from the packages folder.
    This may not be your problem but could point you in a direction?

  • Failed to set Subscriptions on the WSUS Server. Error:(-2147467259)Unspecified error

    Recently restored SCCM 2012 SP1 from Sever 2008 R2, to Server 2012 R2. I had Updates Publisher installed on old 2008 Server with Firefox and Chrome imported into Configuration Manager. Since I have upgraded I am no longer able to sync updates with Microsoft.
    WCM.log says:
    Category Product:44048288-2aac-b2b5-3730-fc020622ea05 (Firefox) not found on WSUS
    Category Product:cc5cb1bb-6b87-94ae-f96a-f758195112a7 (Chrome) not found on WSUS
    Subscription contains categories unknown to WSUS.
    Failed to set Subscriptions on the WSUS Server. Error:(-2147467259)Unspecified error
    STATMSG: ID=6603 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=wdlsccmpri.aarcorp.com SITE=AAR PID=2788 TID=4668 GMTDATE=Mon Feb 17 18:22:43.654 2014 ISTR0="wdlsccmpri.aarcorp.com" ISTR1=""
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=
    I have gone to deselect these products from syncing in Administration> Site > Configure Site Components >Software Update Point Products Tab.  They are not there. Any help on getting SCCM to sync updates would be greatly appreciated.

    PROBLEM
    =========
    Unable to sync after moving the Primary site server to different OS.
    CAUSE
    =======
    Issues with the product and classification setup in the SUP after the restore.
    RESOLUTION
    ===========
    Ran below query to check if we have reference to Firefox and Chrome categories in the database.
    QUERY:
    select CategoryInstance_UniqueID, CategoryInstanceName
    from fn_ListUpdateCategoryInstances(9) cat
    where cat.AllowSubscription=1 and cat.IsSubscribed=1 and cat.IsParentSubscribed=0
    order by cat.CategoryInstance_UniqueID
    RESULT:  [Along with other products we found Chrome and Firefox]
    Product:44048288-2aac-b2b5-3730-fc020622ea05  Firefox
    Product:cc5cb1bb-6b87-94ae-f96a-f758195112a7 Chrome
    Ran Select Query
    select * from CI_CategoryInstances where categoryinstanceid in
    (select categoryinstanceid  from CI_LocalizedCategoryInstances where LocaleID = 9 and CategoryInstanceName = 'Firefox'or
    CategoryInstanceName = 'Chrome')
    RESULT:
    CategoryInstanceID CategoryInstance_UniqueID CategoryTypeName DateLastModified SourceSite ParentCategoryInstanceID IsDeleted rowversion
    16777523 Product:cc5cb1bb-6b87-94ae-f96a-f758195112a7 Product 2013-11-27 21:05:23.000 AAR 16777522 0 0x0000000006B08673
    16777549 Product:44048288-2aac-b2b5-3730-fc020622ea05 Product 2013-11-27 21:05:23.000 AAR 16777536 0 0x0000000006B08676
    Ran Select Query
    select * from CI_LocalizedCategoryInstances where LocaleID = 9 and CategoryInstanceName = 'Firefox'or
    CategoryInstanceName = 'Chrome'
    RESULT:
    CategoryInstanceID LocaleID CategoryInstanceName rowversion
    16777523 9 Chrome 0x0000000006B08674
    16777549 9 Firefox 0x0000000006B08677
    We did find Chrome and Firefox items in the database.
    We need to delete these items in the database.
    We used below queries to delete the reference from the database.
    delete from CI_CategoryInstances where categoryinstanceid in
    (select categoryinstanceid  from CI_LocalizedCategoryInstances where LocaleID = 9 and CategoryInstanceName = 'Firefox'or
    CategoryInstanceName = 'Chrome')
    delete from CI_LocalizedCategoryInstances where LocaleID = 9 and CategoryInstanceName = 'Firefox'or
    CategoryInstanceName = 'Chrome'
    After deleting performed Scheduled Sync. Was successful

  • Non-SysAdmins get error 18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.

    I have a SQL 2008 R2 system (10.50.4000) where I'm having problems connecting any user that is not a SysAdmin.  Example: I setup a new SQL Login to use Windows Authentication and grant that user db_datareader on the target database.  The user attempts
    to connect using Excel client or Access or SQL Management Studio and receives Error 18456.  The SQL Server Logs shows Error 18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
    The strange part is that if I temporarily grant the user the sysadmin server role then the user can connect successfully and retrieve data.  But, if I take away that sysadmin server role then the user can no longer connect but again receives the Error
    18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
    We've turned off UAC on the client machine to see if that was the problem, but no change.
    I have dropped and re-added the user's SQL Login (and the related database user login info).  No success.
    The Ring Buffers output shows:
    The Calling API Name: LookupAccountSidInternal
    API Name: LookupAccountSid
    Error Code: 0x534
    Thanks for any help.
    -Walt

    Yes, you understand correctly.  The user is logging onto a workstation (not the server) with a Windows Authenticated id.  The user is using either Excel or Access or SSMS and connecting to the server using a Windows Authenticated SQL Login account.
     If the account has sysadmin role (which is only for testing) then the connection is successful.  If I take away sysadmin role from the account then the connection is unsuccessful and the SQL Server Log shows Error
    18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
    (SQL Authentication is not an option here.  I must use Windows Authentication).
    Any other troubleshooting assistance you can offer would be appreciated.  Thanks.
    -Walt 

  • Failed to set Subscriptions on the WSUS Server

    We are running SCCM 2012 R2; synchronization of updates is not working.
    The SUP is running on a Windows 2008 R2 server and it is not the Site Server.
    Below I have some log data. I have already tried uninstalling and reinstalling WSUS.
    WCM.log
    Starting WSUS category sync from upstream... SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:22 PM 4488 (0x1188)
    Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:27 PM 4488 (0x1188)
    Attempting connection to WSUS server: cobalt.ad.northcentral.edu, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:27 PM 4488 (0x1188)
    Successfully connected to server: cobalt.ad.northcentral.edu, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:27 PM 4488 (0x1188)
    Successfully refreshed categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:53 PM 4488 (0x1188)
    Attempting connection to WSUS server: cobalt.ad.northcentral.edu, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:53 PM 4488 (0x1188)
    Successfully connected to server: cobalt.ad.northcentral.edu, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:53 PM 4488 (0x1188)
    Category Company:94d731de-22a6-4458-dc4d-b5267de026fc (Adobe Systems, Inc.) not found on WSUS SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:53 PM 4488 (0x1188)
    Subscription contains categories unknown to WSUS. SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:53 PM 4488 (0x1188)
    Failed to set Subscriptions on the WSUS Server. Error:(-2147467259)Unspecified error SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:53 PM 4488 (0x1188)
    STATMSG: ID=6603 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ALGAE.ad.northcentral.edu SITE=NCU PID=1204 TID=4488 GMTDATE=Tue Jan 06 19:14:53.974 2015 ISTR0="cobalt.ad.northcentral.edu" ISTR1=""
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:53 PM 4488 (0x1188)
    Waiting for changes for 59 minutes SMS_WSUS_CONFIGURATION_MANAGER 1/6/2015 1:14:53 PM 4488 (0x1188)
    wsyncmgr.log
    Found active SUP SUP.ad.domain.tld from SCF File.SMS_WSUS_SYNC_MANAGER 
    1/6/2015 1:10:45 PM    4576 (0x11E0)
    Sync failed: WSUS update source not found on site NCU. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSourceSMS_WSUS_SYNC_MANAGER           
    1/6/2015 1:10:45 PM          
    4576 (0x11E0)
    STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=Siteserver.ad.domain.tld SITE=NCU PID=1204 TID=4576 GMTDATE=Tue Jan 06 19:10:45.260 2015 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source
    not found on site NCU. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0SMS_WSUS_SYNC_MANAGER         
    1/6/2015 1:10:45 PM          
    4576 (0x11E0)
    Sync failed. Will retry in 60 minutes        
    SMS_WSUS_SYNC_MANAGER 1/6/2015 1:10:45 PM           
    4576 (0x11E0)
    Setting sync alert to active state on site NCU    
    SMS_WSUS_SYNC_MANAGER 1/6/2015 1:10:45 PM     
    4576 (0x11E0)
    Sync time: 0d00h00m00s   SMS_WSUS_SYNC_MANAGER
    1/6/2015 1:10:45 PM          
    4576 (0x11E0)
    WSUSCtrl.log
    Failed to create instance of Microsoft.SystemsManagementServer.WSUS.WSUSServer. error = Unspecified errorSMS_WSUS_CONTROL_MANAGER        
    1/6/2015 12:39:11 PM        
    4888 (0x1318)

    Blank out/remove all of the categories you have configured in ConfigMgr on the Software Update Point. Then run a full synchronization from the console. This will synch up all available categories without trying to subscribe to any. Then, you can go back
    re-select the categories that want (after the full synch completes) and perform another full synch.
    Right now, you are trying to subscribe to a category that doesn't exist.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • EAP-TLS or PEAP authentication failed during SSL handshake to the ACS serve

    We are running the LWAPP (2006 wlc's and 1242 AP's) and using the ACS 4.0 for authentication. Our users are
    experiencing an issue, where they are successfully authenticated the first time, however as the number of them is increasing, they're starting to drop the connections and being prompted to re-authenticate. At this point, they are not being able to authenticate again.
    We're using PEAP for the authentication and Win XP SP2 clients as the supplicants. The error message that we are seeing on the ACS for that controller is "EAP-TLS or PEAP authentication failed during SSL handshake to the ACS server"...Not sure if this error msg is relevant since we have other WLC's that are working OK and still generating the same error msg on the ACS...
    Thanks..

    Here are some configs you can try:
    config advanced eap identity-request-timeout 120
    config advanced eap identity-request-retries 20
    config advanced eap request-timeout 120
    config advanced eap request-retries 20
    save config

  • Messaging Server 3.6 fails to start even though the Administration Server says "Success"

    Messaging Server 3.6 fails to start even though the Administration Server says
    "Success". There are no entries in the log to help explain what has happened.
    <P>
    Any failure to start Messaging Server via Administration should be analyzed by
    starting the server with /etc/NscpMail.
    <P>
    # /etc/NscpMail start
    19991219004527:Dispatch:Notification:Network Module (IMAP4-Server) Failed the verify environment test.
    Module not Loaded.
    Startup Problem:
    Problem Gaining Unique Lock
    Netscape Messaging Server Exiting!
    <P>
    This error is caused by an inability to create the .netscape.mailID file
    inside the top level of the postoffice.
    <P>
    # cd /var/spool/postoffice
    # ls -la
    total 30
    dr-x------ 8 nobody nobody 512 Dec 19 01:06 .
    drwxrwxr-x 13 root bin 512 Feb 12 1999 ..
    drwx------ 2 nobody nobody 1536 Dec 19 01:04 config
    drwx------ 2 nobody nobody 512 Dec 19 01:04 control
    drwx------ 3 nobody nobody 512 Dec 19 01:04 deferred
    drwx------ 2 nobody nobody 512 Dec 19 01:04 hold
    drwx------ 2 nobody nobody 5120 Dec 19 01:04 log
    drwx------ 2 nobody nobody 512 Dec 19 01:04 messages
    -rw-r--r-- 1 root other 183 Apr 12 1999 sie.conf
    -rw-r--r-- 1 root other 6 Dec 19 01:04 socket.dat
    <P>
    NOTE: The "." entry is the same as ls -l /var/spool/postoffice
    <P>
    # chmod u+w .
    # /etc/NscpMail start
    # ls -la
    total 32
    drwx------ 8 nobody nobody 512 Dec 19 01:04 .
    drwxrwxr-x 13 root bin 512 Feb 12 1999 ..
    -rw------- 1 nobody nobody 5 Dec 19 01:04 .netscape.mailID
    drwx------ 2 nobody nobody 1536 Dec 19 01:04 config
    drwx------ 2 nobody nobody 512 Dec 19 01:04 control
    drwx------ 3 nobody nobody 512 Dec 19 01:04 deferred
    drwx------ 2 nobody nobody 512 Dec 19 01:04 hold
    drwx------ 2 nobody nobody 5120 Dec 19 01:04 log
    drwx------ 2 nobody nobody 512 Dec 19 01:04 messages
    -rw-r--r-- 1 root other 183 Apr 12 1999 sie.conf
    -rw-r--r-- 1 root other 6 Dec 19 01:04 socket.dat

    Hi,
    Please check if you have disabled the autodisconnect feature of the Server service. On Windows servers it can be configured through the Autodisconnect registry key.
    \HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\
    CIFS and SMB Timeouts in Windows
    http://blogs.msdn.com/b/openspecification/archive/2013/03/19/cifs-and-smb-timeouts-in-windows.aspx
    Based on the research, as the open shared folder is in a SMB session, the default timeout for SMB session is 15 minutes. If the SMB session is inactive for 15 minutes the server will send a TCP reset to close the SMB connection. Until the
    Autodisconnect timer is reached, the server will send an NBT keep-alive packet every two minutes. If a client or server application is not written to properly handle network delays, it may terminate the session prior to the default timeout
    period.
    For more detailed information, please refer to the thread below:
    Session doesn't close Shared Folder
    https://social.technet.microsoft.com/Forums/en-US/54f658c8-3d41-4beb-9a2f-47b054a11b7a/session-doesnt-close-shared-folder?forum=smallbusinessserver
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Failed to send email report ,The transport failed to connect to the server

    HI i have to automate my report using sub
    1.I have configured SMTP server in the configuration settings
    2. I have created subscitption using my report,But i here i will found one error.
    Please find the 
    failed to send email report ,The transport failed to connect to the server
    and can u please help me out for this
    when i check in the loge files it will show this error below
    No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. ;

    I have change the settings as u suggested but still not able to send the mail .
    its shows me the same error mesg
    <Header>
      <Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
      <Locale>English (United States)</Locale>
      <TimeZone>W. Europe Standard Time</TimeZone>
      <Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__02_10_2015_03_44_06.log</Path>
      <SystemName>WEGDACM1</SystemName>
      <OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
      <OSVersion>6.1.7601</OSVersion>
      <ProcessID>10420</ProcessID>
      <Virtualization>Hypervisor</Virtualization>
    </Header>
    rshost!rshost!28d0!02/10/2015-03:44:06:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
    rshost!rshost!28d0!02/10/2015-03:44:06:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
    rshost!rshost!28d0!02/10/2015-03:44:06:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
    servicecontroller!DefaultDomain!28f4!02/10/2015-03:44:06:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
       at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
    filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
       at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
    rshost!rshost!28d0!02/10/2015-03:44:06:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
    rshost!rshost!28f4!02/10/2015-03:44:06:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
    servicecontroller!DefaultDomain!28f4!02/10/2015-03:44:06:: i INFO: Recycling the service from the default domain
    rshost!rshost!28f4!02/10/2015-03:44:17:: i INFO: Application domain type WindowsService statistics: created: 10, unloaded: 10, failed: 0, timed out: 0.
    appdomainmanager!DefaultDomain!28f4!02/10/2015-03:44:17:: i INFO: Appdomain:12 WindowsService_10 started.
    library!WindowsService_10!28f4!02/10/2015-03:44:17:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    servicecontroller!WindowsService_10!28f4!02/10/2015-03:44:17:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
    error. 
    resourceutilities!WindowsService_10!28f4!02/10/2015-03:44:18:: i INFO: Reporting Services starting SKU: Enterprise
    servicecontroller!WindowsService_9!28f4!02/10/2015-03:44:18:: i INFO: Service controller exiting.
    appdomainmanager!DefaultDomain!28f4!02/10/2015-03:44:18:: i INFO: Appdomain:11 unregistered.
    appdomainmanager!DefaultDomain!28f4!02/10/2015-03:44:18:: i INFO: Appdomain:11 WindowsService_9 unloading.
    appdomainmanager!DefaultDomain!e24!02/10/2015-03:44:18:: i INFO: AppDomain:11 0 pending unload(s)
    library!WindowsService_10!19f0!02/10/2015-03:44:18:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    library!WindowsService_10!19f0!02/10/2015-03:44:18:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
    error. 
    library!WindowsService_10!19f0!02/10/2015-03:44:18:: e ERROR: ServiceStartThread: Attempting to start service again...
    library!DefaultDomain!1ca8!02/10/2015-10:55:23:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    This is my Logfile can u pls go through it and resolve my issue.

  • Proc_getObject with nolock causes "read operation on a large object failed while sending data to the client"

    SharePoint 2013 code for the SharePoint Config database stored procedure dbo.proc_getObject has been changed from SharePoint 2010 with the difference of select with nolock.
    I am seeing numerous Error 7886, Severity-20 errors nightly:
    "A read operation on a large object failed while sending data to the client. A common cause for this is if the application is running in READ UNCOMMITTED isolation level. This connection will be terminated."
    Here I have commented out "with (nolock)" to 'fix' the error and to align the store proc with SharePoint 2010 code : 
    ALTER PROCEDURE [dbo].[proc_getObject]
    @Id uniqueidentifier,
    @RequestGuid uniqueidentifier = NULL OUTPUT
    AS
    SET NOCOUNT ON
    SELECT
    Id,
    ParentId,
    ClassId,
    Name,
    Status,
    Version,
    Properties
    FROM
    Objects --with (nolock)
    WHERE
    Id = @Id
    RETURN 0
    How is this stored procedure called and for what use?
    Why did Microsoft make this change to SharePoint 2013 - some performance gain through dirty reads at the cost of stability? Or what could be a reason for this to happen that can be fixed?

    GetObject retrieves any farm object that is selected (by ID). Changing this is obviously not supported, and NoLock was used to (help) prevent locks when performing a select query.
    I've never seen this issue, and would guess it is unique to your environment given this is such a core piece of the SharePoint infrastructure.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • An error occurred while sending mail. The mail server responded: 5.7.1 [P4] Message blocked due to spam content in message

    I have been using Thunderbird for a couple of years. On Friday 10 Apr my home email account stopped sending either new messages or replying to incoming emails. In addition I have Thunderbird get my work email and I can send and receive email just fine. I can also send email from my android phone and via the web.
    The message that has started coming up is the following:
    An error occurred while sending mail. The mail server responded: 5.7.1 [P4] Message blocked due to spam content in the message.. Please check the message and try again.
    I have tried reinstalling Thunderbird but nothing changed, I tried changing the port from 25 to 587 to 465 but nothing changed. I do not understand what is going on as on Wednesday Apr 8 everything was working just fine.

    I have just tried ringing RCN and they tell me that because I am not using an RCN email as such they can not help but he suggested that it was a filter in Thunderbird but I have not set any filters and can not see if there are any or how to change them. The only way sending my website url right now is to make it not look like a url. Where do I need to look to solve this as I first wrote last week everything was fine.

  • I can't send an e-mail from thunderbird, it was working well, suddenly it says the following message:An error occurred while sending mail. The mail server respo

    i can't send an e-mail from thunderbird, it was working well though , suddenly it says the following message:An error occurred while sending mail. The mail server responded An error occurred while sending mail. The mail server responded: (Alis-MacBook-Air.local) [46.138.187.135]:51054 is currently not permitted
    OR
    i have changed the port from 587 to 465 but still cannot send e-mail, it keep sending and sending for 5 minutes and respond is time out?

    Can you post your Troubleshooting Information?
    Help (Alt-H) - Troubleshooting Information

  • I cannot send mail. Been so for 2 days. Get the message: An error occurred while sending mail. The mail server responded: Access denied

    When I send message the reply is "Access Denied" and a bunch of gobbly-gook ending with please re-check message. What would I check for? The G-G is of absolutely no value to the human species.
    An error occurred while sending mail. The mail server responded: Access denied...3c61d9886161c1c1b119b169f84d0c00bd1d41014c8da58d391805d17cbcdccd89e9557dcc85058535d178217d0831cc6d65.... Please check the message and try again.
    So what now. Mozilla must be the offspring of Microsoft in that help NEVER HELPS, EVER.

    Hello,
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
    ''(If you're using an added theme, switch to the Default theme.)''
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.
    Thank you.

  • When I send mail, I keep getting this message. An error occurred while sending mail. The mail server responded: "JunkMail rejected - 71-12-190-31.dhcp.leds.al

    When I send mail, I keep getting this message.
    An error occurred while sending mail. The mail server responded: "JunkMail rejected - 71-12-190-31.dhcp.leds.al.charter.com ([127.0.0.1])
    [71.12.190.31]:52956 is in an RBL, see
    http://www.spamhaus.org/query/bl?ip=71.12.190.31". Please check the message recipient [email protected] and try again.
    How do I get rid of this problem?
    WNS

    Hi there,
    If you have a closer look at message you are receiving it already states the problem. The domain 71-12-190-31.dhcp.leds.al.charter.com is blacklisted by spamhaus.org (is in an RBL).
    Your TB is (my guess) setup to send the message directly to the recipient.
    As a rule of thumb the majority of mail sent from a dynamic dns address (the kind of address you are getting from your ISP) is blacklisted as a precaution against spam abuse due to virus/trojan infected PC's.
    Nothing you can change there. Stop sending the message directly and use your ISP's account instead.
    /Frans

Maybe you are looking for