Error 10698 Virtual machine could not be live migrated to virtual machine host

Hi all,
I am running a fail over cluster of
Host:
2 x WS2008 R2 Data Centre
managed by VMM:
VMM 2008 R2
Virtual Host:
1x windows 2003 64bit guest host/virtual machine
I have attempted a live migration through VMM 2008 R2 and im presented withe the following error:
Error (10698)
Virtual machine XXXXX could not be live migrated to virtual machine host xxx-Host01 using this cluster configuration.
(Unspecified error (0x80004005))
What i have found when running the cluster validation:
1 out of the 2 hosts have an error with RPC related to network configuration:
An error occurred while executing the test.
Failed to connect to the service manager on 'xxx-Host02'.
The RPC server is unavailable
However there are no errors or events on host02 that are showing any probelms at all.
In fact the validation report goes on to showing the rest of the configuration information of both cluster hosts as ok.
See below:
List BIOS Information
List BIOS information from each node.
xxx-Host01
Gathering BIOS Information for xxx-Host01
Item Value
Name Phoenix ROM BIOS PLUS Version 1.10 1.1.6
Manufacturer Dell Inc.
SMBios Present True
SMBios Version 1.1.6
SMBios Major Version 2
SMBios Minor Version 5
Current Language en|US|iso8859-1
Release Date 3/23/2008 9:00:00 AM
Primary BIOS True
xxx-Host02
Gathering BIOS Information for xxx-Host02
Item Value
Name Phoenix ROM BIOS PLUS Version 1.10 1.1.6
Manufacturer Dell Inc.
SMBios Present True
SMBios Version 1.1.6
SMBios Major Version 2
SMBios Minor Version 5
Current Language en|US|iso8859-1
Release Date 3/23/2008 9:00:00 AM
Primary BIOS True
Back to Summary
Back to Top
List Cluster Core Groups
List information about the available storage group and the core group in the cluster.
Summary
Cluster Name: xxx-Cluster01
Total Groups: 2
Group Status Type
Cluster Group Online Core Cluster
Available Storage Offline Available Storage
Cluster Group
Description:
Status: Online
Current Owner: xxx-Host01
Preferred Owners: None
Failback Policy: No failback policy defined.
Resource Type Status Possible Owners
Cluster Disk 1 Physical Disk Online All Nodes
IP Address: 10.10.0.60 IP Address Online All Nodes
Name: xxx-Cluster01 Network Name Online All Nodes
Available Storage
Description:
Status: Offline
Current Owner: Per-Host02
Preferred Owners: None
Failback Policy: No failback policy defined.
Cluster Shared Volumes
Resource Type Status Possible Owners
Data Cluster Shared Volume Online All Nodes
Snapshots Cluster Shared Volume Online All Nodes
System Cluster Shared Volume Online All Nodes
Back to Summary
Back to Top
List Cluster Network Information
List cluster-specific network settings that are stored in the cluster configuration.
Network: Cluster Network 1
DHCP Enabled: False
Network Role: Internal and client use
Metric: 10000
Prefix Prefix Length
10.10.0.0 20
Network: Cluster Network 2
DHCP Enabled: False
Network Role: Internal use
Metric: 1000
Prefix Prefix Length
10.13.0.0 24
Subnet Delay
CrossSubnetDelay 1000
CrossSubnetThreshold 5
SameSubnetDelay 1000
SameSubnetThreshold 5
Validating that Network Load Balancing is not configured on node xxx-Host01.
Validating that Network Load Balancing is not configured on node xxx-Host02.
An error occurred while executing the test.
Failed to connect to the service manager on 'xxx-Host02'.
The RPC server is unavailable
Back to Summary
Back to Top
If it was an RPC connection issue, then i shouldnt be able to mstsc, explorer shares to host02. Well i can access them, which makes the report above is a bit misleading.
I have also checked the rpc service and it has started.
If there is anyone that can shed some light or advice me oany other option for trouble shooting this, that would be greatley appreciated.
Kind regards,
Chucky

Similar Messages

How to Fix: Error (10698) The virtual machine () could not be live migrated to the virtual machine host () using this cluster configuration.

I am unable to live migrate via SCVMM 2012 R2 to one Host in our 5 node cluster. The job fails with the errors below.
Error (10698)
The virtual machine () could not be live migrated to the virtual machine host () using this cluster configuration.
Recommended Action
Check the cluster configuration and then try the operation again.
Information (11037)
There currently are no network adapters with network optimization available on host.
The host properties indicate network optimization is available as indicated in the screen shot below.
Any guidance on things to check is appreciated.
Thanks,
Glenn

Here is a snippet of the cluster log when from the current VM owner node of the failed migration:
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RHS] Resource Virtual Machine Configuration VMNameHere called SetResourceLockedMode. LockedModeEnabled0, LockedModeReason0.
00000b6c.00001a9c::2014/02/03-13:16:07.495 INFO [RCM] HandleMonitorReply: LOCKEDMODE for 'Virtual Machine Configuration VMNameHere', gen(0) result 0/0.
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RHS] Resource Virtual Machine VMNameHere called SetResourceLockedMode. LockedModeEnabled0, LockedModeReason0.
00000b6c.00001a9c::2014/02/03-13:16:07.495 INFO [RCM] HandleMonitorReply: LOCKEDMODE for 'Virtual Machine VMNameHere', gen(0) result 0/0.
00000b6c.00001a9c::2014/02/03-13:16:07.495 INFO [RCM] HandleMonitorReply: INMEMORY_NODELOCAL_PROPERTIES for 'Virtual Machine VMNameHere', gen(0) result 0/0.
00000b6c.000020ec::2014/02/03-13:16:07.495 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RES] Virtual Machine Configuration <Virtual Machine Configuration VMNameHere>: Current state 'MigrationSrcWaitForOffline', event 'MigrationSrcCompleted', result 0x8007274d
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RES] Virtual Machine Configuration <Virtual Machine Configuration VMNameHere>: State change 'MigrationSrcWaitForOffline' -> 'Online'
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RES] Virtual Machine <Virtual Machine VMNameHere>: Current state 'MigrationSrcOfflinePending', event 'MigrationSrcCompleted', result 0x8007274d
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RES] Virtual Machine <Virtual Machine VMNameHere>: State change 'MigrationSrcOfflinePending' -> 'Online'
00000e50.00002080::2014/02/03-13:16:07.510 ERR   [RES] Virtual Machine <Virtual Machine VMNameHere>: Live migration of 'Virtual Machine VMNameHere' failed.
Virtual machine migration operation for 'VMNameHere' failed at migration source 'SourceHostNameHere'. (Virtual machine ID 6901D5F8-B759-4557-8A28-E36173A14443)
The Virtual Machine Management Service failed to establish a connection for a Virtual Machine migration with host 'DestinationHostNameHere': No connection could be made because the tar
00000e50.00002080::2014/02/03-13:16:07.510 ERR   [RHS] Resource Virtual Machine VMNameHere has cancelled offline with error code 10061.
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] HandleMonitorReply: OFFLINERESOURCE for 'Virtual Machine VMNameHere', gen(0) result 0/10061.
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] Res Virtual Machine VMNameHere: OfflinePending -> Online( StateUnknown )
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] TransitionToState(Virtual Machine VMNameHere) OfflinePending-->Online.
00000b6c.00001a9c::2014/02/03-13:16:07.510 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] rcm::QueuedMovesHolder::VetoOffline: (VMNameHere with flags 0)
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] rcm::QueuedMovesHolder::RemoveGroup: (VMNameHere) GroupBeingMoved: false AllowMoveCancel: true NotifyMoveFailure: true
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] VMNameHere: Removed Flags 4 from StatusInformation. New StatusInformation 0
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] rcm::RcmGroup::CancelClusterGroupOperation: (VMNameHere)
00000b6c.00001a9c::2014/02/03-13:16:07.510 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.000021a8::2014/02/03-13:16:07.510 INFO [GUM] Node 3: executing request locally, gumId:3951, my action: /dm/update, # of updates: 1
00000b6c.000021a8::2014/02/03-13:16:07.510 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.00001a9c::2014/02/03-13:16:07.510 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.000022a0::2014/02/03-13:16:07.510 INFO [RCM] moved 0 tasks from staging set to task set. TaskSetSize=0
00000b6c.000022a0::2014/02/03-13:16:07.510 INFO [RCM] rcm::RcmPriorityManager::StartGroups: [RCM] done, executed 0 tasks
00000b6c.00000dd8::2014/02/03-13:16:07.510 INFO [RCM] ignored non-local state Online for group VMNameHere
00000b6c.000021a8::2014/02/03-13:16:07.526 INFO [GUM] Node 3: executing request locally, gumId:3952, my action: /dm/update, # of updates: 1
00000b6c.000021a8::2014/02/03-13:16:07.526 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.000018e4::2014/02/03-13:16:07.526 INFO [RCM] HandleMonitorReply: INMEMORY_NODELOCAL_PROPERTIES for 'Virtual Machine VMNameHere', gen(0) result 0/0.
No entry is made on the cluster log of the destination node.
To me this means the nodes cannot talk to each other, but I don’t know why.
They are on the same domain. Their server names resolve properly and they can ping eachother both by name and IP.

Could not find a valid Java virtual machine to load

On a fresh copy of CFMX8, when I run updater 7, it responds
'Could not find a valid Java virtual machine to load'.
This is being installed on a Win2K3 server and this is on a
'freshly minted' POC box solely for the purpose of
installing/testing CFMX8 to determine how it compares to our
CFMX6.1 environment.
You will notice that it is NOT being installed in the default
directory:
JRun Version Information
Vendor Macromedia
Product Name JRun 4.0
Build Number 108487
Version Full Version
License Type Trial License
Serial Number JRD400-69341-58259-30688
JRun 3.x Serial Number
Restricted to Single IP No
Installation Root D:\ISG\software\jrun4
Expiration Date Mar 29, 2008
Evaluation Days Remaining 29
JDK path (JAVA_HOME): D:/ISG/software/jrun4/jre
I do find it curious that I can run the Updater 6, and it
seems to behave properly (it finds the VM). I ran it just as a
test, then wiped everything to start over from scratch. For some
reason do I need to direct Updater 7 to the installation that I did
not have to do in Updater 6?
Thank you in advance for your assistance - Jacques

tried executing the following cmd, below is the following error:
<<command i executed>>
C:\Program Files\Java\jre1.5.0_09\bin>java -classpath "C:\Program Files\Java\jre1.5.0_09\lib\javaws.jar" com.sun.javaws.Main https://<IPddr>:8443/sample.jnlp
Can you pls let me know how it can be resolved?Umm.. I am not sure, but I will start with
a question. Why not do it this way?C:\Program Files\Java\jre1.5.0_09\bin>javaws https://<IPddr>:8443/sample.jnlp

Hyper-V on Windows 8.1 64 bit, "Could not send keys to the virtual machine"

Hi,
I newly installed Windows 8.1 (not an upgrade, fresh install from corporate network) on a Dell Precision T7600 workstation and enabled the Hyper-V feature with the matching management. I created a couple of 2 GB RAM, 2 virtual CPUs VMs and am trying to install
Windows Server 2k8R2 and 2k12 on them. After a network boot, during the first couple dialog boxes for Windows setup, I am unable to use the keyboard. When I try to boot from an ISO, the VM get stuck on a black screen "Starting Windows". In either
case if I use the VM connection window menu to paste from clipboard or send ctrl+alt+del, I get the error:
Virtual Machine Connection
Could not send keys to the virtual machine.
Interacting with the virtual machine's keyboard device failed.
I search online for this error and did not find others experiencing it.
I tried to shutdown and reset both VMs, I stopped and restarted the Hyper-V service. Neither helped. I am not sure what other step I can take at this point.
Also, I configured a virtual switch as external network on one of the two Intel network adapters. Both connect to a gigabit switch. "Allow management operating system to share this network adapter" is checked. Both VMs are on the same virtual switch.
Senior Soft. Dev. Eng. | Microsoft IT | Microsoft Corporation

Hi,
Can you find any information in event log about this issue?
Based on my research, it seems that the Dll file related to Hyper-v was corrupted.
I suggest you try using the following command to repair your system.
1.Open an elevated command prompt: press Win+X, then click Command Prompt(Admin),and press Enter.
2.At the command prompt, type the following command, and then press ENTER:
Dism /Online /Cleanup-Image /RestoreHealth
Regards,
Kelvin hsu
TechNet Community Support

Virtual Machine could not be started because the hypervisor is not running

Hi
I have installed Windows Server 2012 Standard Edition with a GUI. Default configuration, nothing special.
Whenever I want to turn on any machine inside of Hyper-V, the following error message appears:
"Virtual Machine could not be started because the hypervisor is not running"
Whenever this happens, I run the following command:
bcdedit /set hypervisorlaunchtype Auto
and reboot the Server. After a reboot, all Virtual Machines can be started without Problems. However, as soon as I shut down the Server instead of rebooting it, the Problem happens again and I need to enter the command again and reboot.
Now my question is how to solve this Problem. I never had this Issue with Windows Server 2008 R2, maybe there are some differences regarding the Hypervisor in Server 2012. How can I make sure the Hypervisor is always on, even after a Shutdown? Thanks in
Advance

Hi,
Please check whether you have event log with ID 3112.
Hyper-V requires hardware support, including: an x64 CPU; VT (Intel) or AMD-V (AMD) hardware extensions; No eXecute (NX)/eXecute Disable (XD) and full BIOS support for hardware virtualization.
Check if the computer meets the hardware requirements, use the appropriate utility for your CPU manufacturer.
If the computer meets the requirements for Microsoft virtualization software, see the video titled
Hypervisor is not running error: How to fix
, which demonstrates how to change the system BIOS on a computer to enable support for virtualization. Make sure DEP and CPU virtualization is enabled in BIOS. (http://go.microsoft.com/fwlink/?LinkId=163578
Also, check that
Boot Configuration Data (BCD) store is set to start the hypervisor, and then restart your physical computer.
The BCD store contains boot configuration parameters and controls how the operating system is started in Windows Vista and Windows Server 2008 operating systems. These parameters were previously in the Boot.ini file (in BIOS-based operating
systems) or in the nonvolatile RAM (NVRAM) entries (in Extensible Firmware Interface-based operating systems).
You can use the Bcdedit.exe command-line tool to update BCD store with the correct launch options as referenced in the error, and then restart the server. Bcdedit.exe is located in the \Windows\System32 directory by default.
For more information please refer to following MS articles:
Event ID 3112 — Hypervisor Operation
http://technet.microsoft.com/en-us/library/dd581879(v=ws.10).aspx
You receive the error message "virtual machine could not start because the hypervisor is not running" in Windows Server 2008 or Windows Server 2008 R2
http://support.microsoft.com/kb/2490458
Troubleshooting Event ID 3112 "The virtual machine could not be started because the hypervisor is not running."
http://social.technet.microsoft.com/wiki/contents/articles/194.hyper-v-troubleshooting-event-id-3112-the-virtual-machine-could-not-be-started-because-the-hypervisor-is-not-running.aspx
Lawrence
TechNet Community Support

Java Virtual Machine "Could not find main method" what do i do?

Hi I'm very new to java and for my class we are to make an applet and make a class. I figured out how to do it but the Java Virtual Machine gives me an error when I go to run the applet."Could not find the main method. Program Will exit!" . I am using Jbuilder8 personal to compile the code. Using j2sdk1.4.0_03. Could someone tell me how to fix this? Or what I'm doing wrong?
Here is my code.
package assignment5;
Program: Program 5.2
Author: Will W.
Date: 02/20/03
Description: Create a student class that holds the
student name, student ID, phone and number of units
completed. Create methods and a applet to input data
Dispay the student name, student ID, phone, units
completed in a text area.
import java.applet.*;
import java.awt.event.*;
import java.awt.*;
public class Assignment5Applet extends Applet implements ActionListener
     //Create Components
     //TextFields
     TextField txtName = new TextField(25);
     TextField txtId = new TextField(15);
     TextField txtPhone = new TextField(15);
     TextField txtUnits = new TextField(4);
     //TextArea
     TextArea txaList = new TextArea(20,40);
     //Button
     Button btnAdd = new Button("Go");
     //Labels mostly debugging purposes.
     Label lblOutput = new Label();
     Label lblNumberProcessed = new Label();
     Label lblError = new Label();
     public void init()
          //Create the interface for the applet
          Panel pnlLayout = new Panel(new GridLayout(5, 2));
          pnlLayout.add(new Label("Name:"));
          pnlLayout.add(txtName);
          pnlLayout.add(new Label("Student Id:"));
          pnlLayout.add(txtId);
          pnlLayout.add(new Label("Phone #:"));
          pnlLayout.add(txtPhone);
          pnlLayout.add(new Label("Num Units:"));
          pnlLayout.add(txtUnits);
          add(pnlLayout);
          add(btnAdd);
          add(txaList);
          txtName.requestFocus();
          btnAdd.addActionListener(this);
          txtName.addActionListener(this);
          txtId.addActionListener(this);
          txtPhone.addActionListener(this);
          txtUnits.addActionListener(this);
     public void actionPerformed(ActionEvent evt)
                //Variables to hold the data in the textboxes
          String strName;
          String strId;
          String strPhone;
          String strUnits;
          try
               //Get the data
               strName = txtName.getText();
               strId = txtId.getText();
               strPhone = txtPhone.getText();
               strUnits = txtUnits.getText();
                        //Instantiate a student object
                        Student aStudent = new Student(strName, strId, strPhone, strUnits);
                        //Use get student to get the output
                     txaList.append("Output:" + aStudent.getStudent());
               lblOutput.setText("");
          catch(NumberFormatException e)
               lblOutput.setText("Error");
}The my student class
package assignment5;
* Program: Student.java
* Author: Will W.
* Date: 02/20/03
* Descrip:
* Student Class for Assignment5Applet.java
* Contains one constructor and 5 other methods
* for the class
public class Student
        //Class Variables
        private String strName;
        private String strId;
        private String strPhone;
        private String strUnits;
        private String strOutput;
        //Constructor
        public Student(String strNewName, String strNewId, String strNewPhone, String strNewUnits)
          setName(strNewName);
          setId(strNewId);
          setPhone(strNewPhone);
          setUnits(strNewUnits);
        //Methods
        public void setName(String strNewName)
                //Assign new value to private variable
                strName = strNewName;
        public void setId(String strNewId)
                strId = strNewId;
        public void setPhone(String strNewPhone)
                strPhone = strNewPhone;
        public void setUnits(String strNewUnits)
                strUnits = strNewUnits;
        public String getStudent()
                //Put the output together
                strOutput = strName + "\n" + strId + "\n" + strPhone + "\n" + strUnits;
                return strOutput;
}Everythings seems to compile correctly without errors it's just when I execute to the running program that the Java Virtual Machine throws me that error saying it can't find the main method.

Java Virtual Machine "Could not find main method" what do i do?
Ok Ok OK I got the solution for you ,this is what you do you put your hands inbetweenj you leggs and run around in a circle can scream me nuts me nuts me nuts are on fire,then come back and tell use if the problem is solved or not
Good luck hehehehe:P

Virtual machine could not be started because hypervisor is not running

I am having trouble starting a VM. I am suspecting that it might be due to my hardware. I have a Dell Optiplex 755 A09. Processor is Intel Duo Core E4500 @2.2Ghz Hyperthreading = No and 2 mb cache. I had this computer given to me, but would like to run Hypervisor on it if possible. Can the processor be upgraded, if so, what would I have to purchase in order to make hypervisor work?

I m using HP Prolient BL460C Blade Server with Intel Xeon(R) E 5450 @3.00 GHz.
and facing problem with the error "the
virtual machine could not be started because the hypervisor is not running"
I tried following in BIOS:
- No-Execute Memory Protection - Enabled
- Intel Virtualization Technology - Enabled
but I get Blue Screen, after that I came through link below to change the registry setting mentioned by Rajiv as above, and thx to him I did not face Blue Screen after that...(Dont really know what Blue Screen has to do with Hibernate/sleep mode)
http://www.computers.nepalesemap.com/index.php?topic=1554.0
I shutdown and cold-booted the server properly.
But still I am still at the same point "the
virtual machine could not be started because the hypervisor is not running"
Some
more suggestions ?
Warm
Regards

HT3275 I get the following message - "Time Machine could not complete the backup." "Unable to complete backup." "An error occurred while creating the backup folder.""

I get the following message - "Time Machine could not complete the backup." "Unable to complete backup. An error occurred while creating the backup folder.""
This MAC is partioned with Windows 7 with only 50 gig devoted to Windows so my son can play Flight Simulator X on the machine.
I have a WD Passport External Hard Drive for the Back Up
I have spoken with WD Tech Support and they have been fantastic but I still keep getting this message. Any thought?
Maxx

Reboot the TC.. it sometimes gets lost on the network.. are you still actually using 10.6.8 as the problem is more prevalent on Lion and ML it seems is no better.
You might find reset of the TC is needed. change the names to short, no spaces pure alphanumeric.
Reset the TM to the new name.. use the A4 in Pondini's great KB.
http://pondini.org/TM/Troubleshooting.html

HT3275 For the past several days, I have been getting this message during backups: Time Machine could not complete the back up. The backup disk image "Volumes/Data/iMac.sparsebundle" could not be accessed (error-1).

For the past several days, I have been getting this message during backups:
Time Machine could not complete the back up. The backup disk image "Volumes/Data/bhoppy2's iMac.sparsebundle" could not be accessed (error-1). When I click on the 'help' icon on the message, it reverts to a blank page, and I cannot find anything online regarding the term 'sparsebundle.' In addition, I cannot access previous backups any longer.
Help?

See C17 in Time Machine Troubleshooting by Time Machine guru Pondini:
http://pondini.org/TM/Troubleshooting.html

My Time Machine keeps repeating the error message "Time Machine could not complete the back- The back-up disk image "/Volumes/Data/User's iMac.sparsebundle" could not be accessed (error -1). How can I fix this?s/

My Time Machine could not complete the back-up. The error message says "The backup disk image "/Volumes/DataUser's iMac.sparsebundle" could not be accessed (error-1). How can I fix this problem?

Welcome to the Apple Support Communities
See > http://pondini.org/TM/C17.html

I get this error message when I try to back up my laptop: Time machine could not complete the backup. The backup disc image "/Volumes/Data/Lou Ann Buesing's Mac Book Pro. sparse bundle is already in use. Anyone know how to fix it?

I get this error message when I try to back up my laptop:
' Time machine could not complete the backup. The backup disc image "/Volumes/Data/Lou Ann Buesing's Mac Book Pro. sparse bundle' is already in use. "
Anyone know how to fix it?

Reboot the TC.. Sometimes you need to reboot the whole network.
This is what comes of Lion and then made worse in Mountain Lion of Apple not spending enough time to fix the bugs.
Read C12 in pondini.
http://pondini.org/TM/Troubleshooting.html
C17 can be related I think.

HT1218 ?My time machine could not complete back up. Says backup disk image"/volumes/data/name's iMac.sparsebundle" could not be accessed error 1??

Time Machine could not complete the backup.
The backup disk image "/Volumes/Data/Name's iMacsparsebundle" could not be accessed (error -1 )

I checked the pondini fixes and ended up doing the following - in case this could help someone else with OSX Lion and Time Capsule... http://pondini.org/TM/Troubleshooting.html
First, I downloaded and used Airport Utility 5.6 instead of 6.1 - BTW, I had to attempt download and installation THREE times before the program actually installed. Be persistant.
Pondini #5: It's possible some names (of all things!) may be a problem. See item C9. I had to re-name my Mac, Time Capsule, network, etc... to remove all apostrophes and spaces.
Pondini #7: If you have WD SmartWare installed on Lion, it's not compatible, per RoaringApps, and there are reports it can cause this problem as well. Use Western Digital's uninstaller, or delete the app from /Applications and the files com.wdc.WDDMservice.plist and com.wdc.WDSmartWareServer.plist from /Library/LaunchDaemons. There may also be a file in Library/Application Support.
I then had to shut down computer, unplug Time Capsule, unplug modem; plug everything in again, then reboot computer; then had to go to Apple- System Preferences- Network- and reselect my Time Capsule to connect to WiFi again.
Then opened Time Machine preferences again and attempted back up - it worked!

Time Machine Backup Error. Time machine could not delete the backup disk image .sparsebundle

Time Machine is giving an error message. Time Machine couldnt complete the backup. I am using the Seagate GoFlex Home. Error message states Time Machine could not delete the backup disk image "/volumes/Go Flex Home Backup/iMAc.sparsebundle". Does anybody have any ideas?

I have deleted all files in the Time Machine backup via Windows, Finder, and GoFlex UI.
I think this is your problem.. you need to follow the exact setup from seagate to get TM running again.. please read the manual... I do not have one but I do have another brand of NAS and setting up TM involves a fairly complex set of instructions.. because it is not a native Apple device.. your computer does not recognise it as TM capable.. you need to use the work around the manual will explain.

HT201250 My Time Machine is not backing up and gives me this error report, 'The backup disk image "/Volumes/Data/Valarie'siMac.sparsbundle" is already in use. Time machine could not complete backup. Can anyone help me?

My Time Machine is not backing up and gives me this error report:
The backup disk image "/Volumes/Data/Valarie'siMac.sparsbundle" is already in use
Time Machine could not complete backup
Can anyone help me?

Look at the discussion on the following forum:
https://discussions.apple.com/thread/3882138?start=0&tstart=0
The responses given there may help.

Preview Error: "no endpoint listening at net.pipe ... incorrect address or SOAP action ... could not be found on your local machine"

Hi
I am developing SSRS reports, suddenly now I am getting this error when I try to preview a report in the VS 2010 shell:
"This is a designer preview error, "There was no endpoint listening at net.pipe://localhost/PreviewProcessngServcie11108/ReportProcessng that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerExcelption,
if present, for more details. The pipe endpoint 'net.pipe://localhost/PreviewProcessing11108/ReportProcessing' could not be found on your local machine"
The error has come out of the blue, reports which I used to be able to preview, I can't preview anymore.
Anybody knows what to do to make it work again?

I tried to apply Mike Yin' answer on this thread
http://social.msdn.microsoft.com/Forums/en-US/38ff8d54-06aa-40c3-8916-378d5185320e/report-designer-preview-in-ssdt-throws-up-a-end-point-not-found-error?forum=sqlreportingservices
Suggestion 1:
Press WinKey+R , input “services.msc” in the Run box, and press enter.
In the local services list, find the “Net.Pipe Listener Adapter”.
If it is stopped, start it. If it is started, restart it.
I found that “Net.Pipe Listener Adapter” was not enabled, so I enabled it and started/restarted it. Now it works again :)

Error 10698 Virtual machine could not be live migrated to virtual machine host

Similar Messages

Maybe you are looking for