Error 131 Transaction rolled back by lock wait timeout

Hello all,
I was trying to run apriori, and then HANA writer in my database.
Apriori executes directly, and then I configure and try to execute HANA Writer. But it keeps executing for more than half an hour, and then gives the following error: Error 131 Transaction rolled back by lock wait timeout. Lock timeout occurs while waiting TABLE_LOCK of mode EXCLUSIVE.
Bimal suggested me to reduce the data to be analysed, so then I reduced it to a pretty small part and executed again.
It gave me the same error after more than 30 minutes waiting executing.
after having this error, I tried just execute apriori, but with a filter of 5 transactions and than it worked. After that I tried to visualize the results, and got the following error:
It means that my HANA memory is full?
I got the view from HANA:
Regards!
Error 131 Transaction rolled back by lock wait timeout 

Hi Jurgen,
I'm a developper for PAL from Shanghai team.
Could you please provide some details information about this case:
-          How many records did you use ?
-          What’s the value of “MIN_SUPPORT” and “MIN_CONFIDENCE” did you use ?
The algorithm of apriori will consume much memory when the input data is very large and min_support is low.
So I suggest you set “MIN_SUPPORT” and “MIN_CONFIDENCE” as 0.9 firstly, check if it can output result.
Thanks,
Peng

Similar Messages

  • SQL message: transaction rolled back by lock wait timeout; SQL 131

    Hi,
    There is a table which already has about 77 lakh records. The modify on it gives the following error.
    SQL error "SQL code: 131" occurred while accessing table "/PSMP/D_UACTID".
    (runtime error DBSQL_SQL_ERROR)
    (SQL statement:MODIFY /psmp/d_uactid FROM TABLE lt_uactid.)
    Did anyone face this kind of an issue. If yes, kindly share the learning.
    Thanks and Regards,
    Madhura Lobo

    Hi,
    I have already given the modify query in the initial post above. Here is the table structure.
    MANDT                     CLNT 3
    CUST_ID                  CHAR 10
    SYS_NUM                CHAR 18
    CNTXT_ID                INT4 10
    SAR_ID                     CHAR 30
    UYEAR                      CHAR 4
    UQUAR                      CHAR 1
    CUST_NAME             CHAR 35
    SYS_ID                      CHAR 3
    SYS_NAME               CHAR 40
    SAR_NAME               SSTRING 255
    TOTAL_NR                INT4 10
    USED_NR                  INT4 10
    Once again the SQL statement: MODIFY /psmp/d_uactid FROM TABLE lt_uactid.
    Regards,
    Madhura Lobo

  • Error: [129]: transaction rolled back by an internal error:  [129] transaction rolled back by an internal error: exception 141000274: exception 141000274: TRexUtils/ParallelDispatcher.cpp:275 message not found; $message$=

    Hello Gurus,
    I have a couple of calculation views in HANA and each of them has text fields (like Employee Name, Country Name etc.).
    As part of my project requirement, I have join those two views and get all the fields that exist in them.
    When I am doing so, I am getting a weird error as shown below.
    Error: [129]: transaction rolled back by an internal error:  [129] transaction rolled back by an internal error: exception 141000274: exception 141000274:
    TRexUtils/ParallelDispatcher.cpp:275
    message not found; $message$='TSR HTKD JFSDFM'
    Please check lines: 59,
    Upon, researching further, I could see that the value 'TSR HTKD JFSDFM' is the value in text field of Employee Name.
    I did try to increase the length of the field and change the data types but nothing has worked.
    Could you please help me in getting this one resolved.
    Thanks,
    Raviteja

    Hi,
    I am exactly facing the same issue:
    Error: [129]: transaction rolled back by an internal error:  [129] transaction rolled back by an internal error: exception 141000274:
    But i found a fix :-) .....
    This may be a very late reply but it would help people who desperately searching for an answer for this issue.
    I used CAST function .. The problem is, we are selecting data from table and of course we dont know the size of the data (attribute) @ runtime. We assign the length by looking at the table attr length or view op attr length. But what happens is the junk data which exceeds the limit of the allocated space hence we get this error.
    So i used CAST function to truncate the excess junk values (may be spaces).
    Example:
    I have a ATTR view of date in the format YYYY-MM-DD which means 10 char size.
    In my CALC view I have created date OP column of VARCHAR(10) but I get the above error for no reason. Eventhoug i am 100% sure about my ATTR date would be max of 10 char my CALC view is failing @ runtime.
    So i did a CAST on date as CAST(my_date as varchar(10)) and the magic happend. It works .......
    But you need to be careful in using this because if you use CAST you may lose data. Careful. In my case i dont.
    Somebody from HANA team should look at this issue from SAP and solve this. I am sure it is a serious bug from HANA (eventhough i am using SAP HANA SP09 Rev 92 the most latest as of today !!!!!!!!!! )
    Enjoy....
    Thanks & Regards
    Prakash K

  • Transaction rolled back by an internal error

    Hello
    I am wrting a stored procedure .
    In that i wrote a while loop.
    The Requirement is even though any exception is caught it should continue.
    If ant exception is occured I am getting the error transaction rolled back by an internal error and execution exits.
    But it should continue.
    I am not using any transactions.
    Please help me.

    Hi,
    I am exactly facing the same issue:
    Error: [129]: transaction rolled back by an internal error:  [129] transaction rolled back by an internal error: exception 141000274:
    But i found a fix :-) .....
    This may be a very late reply but it would help people who desperately searching for an answer for this issue.
    I used CAST function .. The problem is, we are selecting data from table and of course we dont know the size of the data (attribute) @ runtime. We assign the length by looking at the table attr length or view op attr length. But what happens is the junk data which exceeds the limit of the allocated space hence we get this error.
    So i used CAST function to truncate the excess junk values (may be spaces).
    Example:
    I have a ATTR view of date in the format YYYY-MM-DD which means 10 char size.
    In my CALC view I have created date OP column of VARCHAR(10) but I get the above error for no reason. Eventhoug i am 100% sure about my ATTR date would be max of 10 char my CALC view is failing @ runtime.
    So i did a CAST on date as CAST(my_date as varchar(10)) and the magic happend. It works .......
    But you need to be careful in using this because if you use CAST you may lose data. Careful. In my case i dont.
    Somebody from HANA team should look at this issue from SAP and solve this. I am sure it is a serious bug from HANA (eventhough i am using SAP HANA SP09 Rev 92 the most latest as of today !!!!!!!!!! )
    Enjoy....
    Thanks & Regards
    Prakash K

  • Transaction rolled back......soa 11g

    I have a bpel process 1 which calls bpel process 2. Bpel process 2 is a file write. In my instance bpel process 2 is called and the file is written successfully. but bpel process 1 gets errored out with no errors being displayed. The bpel process 1 has a red colour at the point where it invokes the child process. and also a line saying transaction rolled back.
    But there is no error in the child process instance
    Please do suggest me the solution.

    The issue may be due to the transaction timeout, verify the configured timeouts and the processing time of the process B.
    Try increasing Sync Max Time Out and the other timeouts accordingly and test it.
    Refer the below URL for the details of configuring the timeouts.
    http://www.albinsblog.com/2011/11/oracle-soa-11g-configure-transaction_20.html
    Regards
    Albin I

  • C#  TransactionOption.RequiresNew ORA-24761 Transaction Rolled Back

    Hi all,
    I am working on Web service in C# with VS 2005. I am using IIS 5.1, Oracle 10g.
    Problem:
    I used
    [WebMethod(TransactionOption = TransactionOption.RequireNew)]
    [AutoComplete]
    with each Web Method of web service. If something goes wrong inside the web method i use ContextUtil.SetAbort() to abort the transaction else ContextUtil.SetComplete()
    Now after getting some problem while executing a web method, next time when i call any web method oracle terminates the transaction passing error "ORA-24761 : Transaction rolled back". But if again, i try the same call, its got executed with no problem!
    Any kind of help, will be appreciated, its urgent.

    Hello,
    Do you have support with Oracle? If so, I would suggest opening an SR and reference bugs 5410059, 5353967, and 4432906. In some cases not using connection pooling has been a workaround.
    Regards,
    Mark

  • Lock wait timeout: Could not commit JPA transaction

    We are using MySQL v5.1.67 under Solaris (SmartOS) in a zone. We are using Java EE and Jetty as our servlet container (Hibernate, Ehcache). Sometimes we get: "Could not commit JPA transaction; nested exception is javax.persistence.RollbackException: Error while commiting the transaction" and then "Lock wait timeout exceeded; try restarting transaction". We have the database as one file instead of one file per table. The file is large about 20 GB. There are millions of rows in many tables. One table has 30 million rows. Some table has varchar(255)s. Some others have texts. It seems like cells in the database has been broken. Because if you try to update the same entry in the DB you get a "Lock wait timeout exceeded; try restarting transaction", just by issuing a MySQL query. The problem persists until you restart the DB server. Sometimes they start appearing again after a while. Now they seem to come more and more often. There are a lot of threads in the Java EE .war application. We send more and more JMS messages. There is also PHP-code accessing the database. How do we stop this problem from occuring?

    I don't think it's threads deadlocking. I've seen this problem many times before and I've always been able to fix it by restarting the MySQL-server. Then it executes normally day after day. Then something special happens and then it fails every day until I restart mysql. I've also encountered the same problem using the test database I have on my local machine. Only one job executes, the one I'm testing. First it works every run. Something special happens usually triggered by errant code. I fix the error. The job continues to fail with the same message "Could not commit JPA transaction; nested exception is javax.persistence.RollbackException: Error while commiting the transaction". If try to do a simple UPDATE SQL query accessing exactly the row that's been corrupted, I get a lock wait timeout. But if I restart the database it starts working again. The update works and the Java job works both locally and on the server. But now a special job has experienced more severe problems of this nature. I restart mysql and the job works when triggered manually but not when triggered chronologically on schedule. Actually all failed first and then a few worked but most failed. It's the same job executing multiple times.

  • Remote or transactional roll back exception

    Hi All,
    I have deployed CMP2 entity bean to SUN ONE with Oracle as DB. There is no problem while retrieving/updating values to the table. But throws following
    exception while adding values to the table.
    Exception from the server log is below:
    SEVERE: EJB5071: Some remote or transactional roll back exception occurred
    com.sun.jdo.api.persistence.support.JDOFatalInternalException: Got an unknown ex
    ception.
    NestedException: java.lang.NullPointerException
    at com.sun.jdo.spi.persistence.support.sqlstore.SQLStateManager.updatePe
    rsistent(Unknown Source)
    at com.sun.jdo.spi.persistence.support.sqlstore.impl.PersistenceManagerI
    mpl.beforeCompletion(Unknown Source)
    at com.sun.jdo.spi.persistence.support.sqlstore.impl.TransactionImpl.not
    ifyBeforeCompletion(Unknown Source)
    at com.sun.jdo.spi.persistence.support.sqlstore.impl.TransactionImpl.com
    mitBefore(Unknown Source)
    at com.sun.jdo.spi.persistence.support.sqlstore.impl.TransactionImpl.bef
    oreCompletion(Unknown Source)
    at com.sun.ejb.containers.ContainerSynchronization.beforeCompletion(Unkn
    own Source)
    at com.sun.enterprise.distributedtx.J2EETransaction.commit(Unknown Sourc
    e)
    at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(Unk
    nown Source)
    at com.sun.ejb.containers.BaseContainer.completeNewTx(Unknown Source)
    at com.sun.ejb.containers.BaseContainer.postInvokeTx(Unknown Source)
    at com.sun.ejb.containers.BaseContainer.postInvoke(Unknown Source)
    at com.siptech.pdf.ejb.config.session.ConfigSessionBean_EJBObjectImpl.se
    tCountry(ConfigSessionBean_EJBObjectImpl.java:558)
    at com.siptech.pdf.ejb.config.session._ConfigSessionBean_EJBObjectImpl_T
    ie._invoke(Unknown Source)
    at com.sun.corba.ee.internal.POA.GenericPOAServerSC.dispatchToServant(Un
    known Source)
    at com.sun.corba.ee.internal.POA.GenericPOAServerSC.internalDispatch(Unk
    nown Source)
    at com.sun.corba.ee.internal.POA.GenericPOAServerSC.dispatch(Unknown Sou
    rce)
    at com.sun.corba.ee.internal.iiop.ORB.process(Unknown Source)
    at com.sun.corba.ee.internal.iiop.RequestProcessor.process(Unknown Sourc
    e)
    at com.iplanet.ias.corba.ee.internal.iiop.ServicableWrapper.service(Unkn
    own Source)
    at com.iplanet.ias.util.threadpool.FastThreadPool$ThreadPoolThread.run(U
    nknown Source)
    at java.lang.Thread.run(Thread.java:536)
    WARNING: CORE3283: stderr: java.lang.NullPointerException
    WARNING: CORE3283: stderr: at com.sun.jdo.spi.persistence.support.sqlstore.
    sql.generator.UpdateQueryPlan.addConstraint(Unknown Source)
    WARNING: CORE3283: stderr: at com.sun.jdo.spi.persistence.support.sqlstore.
    sql.generator.UpdateQueryPlan.addBasetableConstraint(Unknown Source)
    WARNING: CORE3283: stderr: at com.sun.jdo.spi.persistence.support.sqlstore.
    sql.generator.UpdateQueryPlan.processStatements(Unknown Source)
    WARNING: CORE3283: stderr: at com.sun.jdo.spi.persistence.support.sqlstore.
    sql.generator.UpdateQueryPlan.build(Unknown Source)
    WARNING: CORE3283: stderr: at com.sun.jdo.spi.persistence.support.sqlstore.
    model.ClassDesc.getUpdateQueryPlanForUpdate(Unknown Source)
    WARNING: CORE3283: stderr: at com.sun.jdo.spi.persistence.support.sqlstore.
    model.ClassDesc.getUpdateQueryPlan(Unknown Source)
    WARNING: CORE3283: stderr: at com.sun.jdo.spi.persistence.support.sqlstore.
    SQLStoreManager.executeBatch(Unknown Source)
    WARNING: CORE3283: stderr: at com.sun.jdo.spi.persistence.support.sqlstore.
    SQLStateManager.updatePersistent(Unknown Source)
    WARNING: CORE3283: stderr: at com.sun.jdo.spi.persistence.support.sqlstore.
    impl.PersistenceManagerImpl.beforeCompletion(Unknown Source)
    WARNING: CORE3283: stderr: at com.sun.jdo.spi.persistence.support.sqlstore.
    impl.TransactionImpl.notifyBeforeCompletion(Unknown Source)
    WARNING: CORE3283: stderr: at com.sun.jdo.spi.persistence.support.sqlstore.
    impl.TransactionImpl.commitBefore(Unknown Source)
    WARNING: CORE3283: stderr: at com.sun.jdo.spi.persistence.support.sqlstore.
    impl.TransactionImpl.beforeCompletion(Unknown Source)
    WARNING: CORE3283: stderr: at com.sun.ejb.containers.ContainerSynchronizati
    on.beforeCompletion(Unknown Source)
    WARNING: CORE3283: stderr: at com.sun.enterprise.distributedtx.J2EETransact
    ion.commit(Unknown Source)
    WARNING: CORE3283: stderr: at com.sun.enterprise.distributedtx.J2EETransact
    ionManagerOpt.commit(Unknown Source)
    WARNING: CORE3283: stderr: at com.sun.ejb.containers.BaseContainer.complete
    NewTx(Unknown Source)
    WARNING: CORE3283: stderr: at com.sun.ejb.containers.BaseContainer.postInvo
    keTx(Unknown Source)
    WARNING: CORE3283: stderr: at com.sun.ejb.containers.BaseContainer.postInvo
    ke(Unknown Source)
    WARNING: CORE3283: stderr: at com.siptech.pdf.ejb.config.session.ConfigSess
    ionBean_EJBObjectImpl.setCountry(ConfigSessionBean_EJBObjectImpl.java:558)
    WARNING: CORE3283: stderr: at com.siptech.pdf.ejb.config.session._ConfigSes
    sionBean_EJBObjectImpl_Tie._invoke(Unknown Source)
    WARNING: CORE3283: stderr: at com.sun.corba.ee.internal.POA.GenericPOAServe
    rSC.dispatchToServant(Unknown Source)
    WARNING: CORE3283: stderr: at com.sun.corba.ee.internal.POA.GenericPOAServe
    rSC.internalDispatch(Unknown Source)
    WARNING: CORE3283: stderr: at com.sun.corba.ee.internal.POA.GenericPOAServe
    rSC.dispatch(Unknown Source)
    WARNING: CORE3283: stderr: at com.sun.corba.ee.internal.iiop.ORB.process(Un
    known Source)
    WARNING: CORE3283: stderr: at com.sun.corba.ee.internal.iiop.RequestProcess
    or.process(Unknown Source)
    WARNING: CORE3283: stderr: at com.iplanet.ias.corba.ee.internal.iiop.Servic
    ableWrapper.service(Unknown Source)
    WARNING: CORE3283: stderr: at com.iplanet.ias.util.threadpool.FastThreadPoo
    l$ThreadPoolThread.run(Unknown Source)
    WARNING: CORE3283: stderr: at java.lang.Thread.run(Thread.java:536)
    Thanks,
    Muthu.

    Hi Muthu,
    from looking into SQLStateManager.updatePersistent, I doubt that we can run into an NPE here.
    Can you please send us the entire log file? BTW: It would be much easier for me to help you, if I could see line the numbers in the stack trace. Would it be possible for you to get an non
    optimized build and rerun your application?
    Thank you,
    -- markus.

  • Remote or transactional roll back exception occurred

    Hi,
    I am getting this message, anybody could help me?
    SEVERE ( 1166): EJB5071: Some remote or transactional roll back exception occurred
    com.sun.jdo.api.persistence.support.JDOFatalInternalException: Got an unknown exception.
    NestedException: java.lang.IndexOutOfBoundsException: Index: 1, Size: 1
    at com.sun.jdo.spi.persistence.support.sqlstore.SQLStateManager.updatePersistent(SQLStateManager.java:1012)
    at com.sun.jdo.spi.persistence.support.sqlstore.impl.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.java:1251)
    at com.sun.jdo.spi.persistence.support.sqlstore.impl.TransactionImpl.notifyBeforeCompletion(TransactionImpl.java:1115)
    at com.sun.jdo.spi.persistence.support.sqlstore.impl.TransactionImpl.commitBefore(TransactionImpl.java:743)
    at com.sun.jdo.spi.persistence.support.sqlstore.impl.TransactionImpl.beforeCompletion(TransactionImpl.java:646)
    at com.sun.ejb.containers.ContainerSynchronization.beforeCompletion(ContainerSynchronization.java:105)
    at com.sun.enterprise.distributedtx.J2EETransaction.commit(J2EETransaction.java:183)
    at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:310)
    at com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:1786)
    at com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:1585)
    at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:510)
    at br.com.inttegra.infra.businesslayer.ejb.ControllerBean_EJBObjectImpl.insert(ControllerBean_EJBObjectImpl.java:136)
    at br.com.inttegra.infra.businesslayer.ejb._ControllerBean_EJBObjectImpl_Tie._invoke(Unknown Source)
    at com.sun.corba.ee.internal.POA.GenericPOAServerSC.dispatchToServant(GenericPOAServerSC.java:569)
    at com.sun.corba.ee.internal.POA.GenericPOAServerSC.internalDispatch(GenericPOAServerSC.java:211)
    at com.sun.corba.ee.internal.POA.GenericPOAServerSC.dispatch(GenericPOAServerSC.java:113)
    at com.sun.corba.ee.internal.iiop.ORB.process(ORB.java:275)
    at com.sun.corba.ee.internal.iiop.RequestProcessor.process(RequestProcessor.java:83)
    at com.iplanet.ias.corba.ee.internal.iiop.ServicableWrapper.service(ServicableWrapper.java:25)
    at com.iplanet.ias.util.threadpool.FastThreadPool$ThreadPoolThread.run(FastThreadPool.java:283)
    at java.lang.Thread.run(Thread.java:536)

    Hi,
    Please make shure, that your sun-cmp-mappings.xml is correct. The exception in your message just indicates a problem executing a sql statement. Please look into your log file again if you could find another exception trace showing where the IndexOutOfBoundsException happens.
    Thanks,
    -- markus.

  • Finding the lock wait timeout in Oracle 11g

    Want to know how to find the lock wait timeout set on Oracle 11g

    Hi,
    To find number of seconds a distributed transaction waits for a lock:
    SELECT *
      FROM v$parameter
    WHERE NAME = 'distributed_lock_timeout';To find all parameter's related to lock you can use something like this:
    SELECT *
      FROM v$parameter
    WHERE NAME like '%lock%';Thanks,
    Shankar

  • Receiving 'OracleException ORA-24761: transaction rolled back errors

    Hi all,
    I am receiving the above error intermittently in our .NET application. The .NET apps makes heavy use of txns (using COM+), Oracle services for MTS, ODP.NET and is talking to a 9205 db.
    We have tried several combinations of timeout settings in DB and .NET sides (to no avail).
    Any suggestions why this error could be happening?
    Rgds,
    Prasanna

    I enabled ODP tracing but don't know what to look for. The trace files quickly grow to 100+ MB. Searched for strings error/fail/24761/(MTS)/back but couldn't find any useful information.
    Successful calls seem to start with:
    TIME:2003/ 3/10- 9:24:10:140 TID: cc4 (MTS) Enlistment result: 0
    Thanks,
    Armin

  • Regarding DB adapter transactions roll back

    Hi All,
    In a BPEL, using while loop i'm trying to insert records in a table(business table-Oracle XE DB). If any errors happen during the insertion, it should rollback the previous insertions happened in the business table and insert the error details in the log table.
    Example: Let's say 5 records need to be inserted in business table, after first two records get inserted successfully, due to invalid data, 3rd record fails to get inserted.
    Things i have done,
    1) I have a catch block to catch the errors
    2) I have an invoke activity in the catch block to invoke the DB adapter to insert error details in log table.
    3) Throw activity with bpelx:rollback to roll back the previous transactions.
    Question: After the error details get inserted in log table, since i have a throw activity with bpelx rollback, all the previous DB transactions including the log table insertion is getting rolled back. I don't want my log table record insertion to be rolled back, only the records which i have already inserted successfully in the business table needs to be rolled back.
    Can anyone let me know, how to handle such a situation? your response is greatly appreciated.

    You need to ensure that your process is working in a single transaction.
    You are correctly using the XA datasource.
    Next you need to ensure that you do not have a dehydration point in the process and if there is a call to another BPEL process they are in a same transaction.

  • Avoid transaction roll back using exception handler

    Hi everybody!
    I've created a proxy service in OSB using a DB adapter for polling from a database table. I've configured the service to be transactional with same transaction for reponse. The proxy has a route node that routes to a business service created from a db adapter for storing the polled data. Insert table has a db trigger associated wich raises a custom exception in certain cases. I need to catch that exception in the route exception handler to avoid the full transaction to be marked rolled back. For this, I've setup a response with failure action in the handler.
    After testing the service I realized that it's not working as expected as transaction is being rolled back when the trigger raises the exception (so registry is not marked as polled in source table).
    Could anyone explain me which action should be taken to avoid a rollback when handling exception?
    Best regards,
    Daniel.

    Hi Athhek,
    If I set reply with success then both route node and system error handlers are executed. I get following response metadata
    <con:metadata      xmlns:con="http://www.bea.com/wli/sb/test/config">
    <tran:response-code      xmlns:tran="http://www.bea.com/wli/sb/transports">1</tran:response-code>
    </con:metadata>
    and also following error reaches system handler:
    <con:fault      xmlns:con="http://www.bea.com/wli/sb/context">
    <con:errorCode>BEA-382050</con:errorCode>
    <con:reason>
    Expected active transaction, actual transaction status: Marked Rollback
    </con:reason>
    <con:location>
    <con:path>response-pipeline</con:path>
    </con:location>
    </con:fault>
    When I set reply with error only route node handler is executed but I still get
    <con:metadata      xmlns:con="http://www.bea.com/wli/sb/test/config">
    <tran:response-code      xmlns:tran="http://www.bea.com/wli/sb/transports">1</tran:response-code>
    </con:metadata>
    Thank you.

  • Transaction roll back exception in setRollbackOnly in stateless bean

    Hello All,
    Im using WLS 5.1 SP9 on Win2k with Oracle 8.
    Flow:
    A stateless session bean with container-managed transaction uses
    entity beans to insert records into 3 tables, vide:
    Primary - CMP,
    Secondary - BMP,
    Tertiary - CMP
    If validation fails on the data thats coming in, error messages are
    sent back to the client and the transaction is set to roll back with
    the folliwng stmt :
    sessionContext.setRollbackOnly();
    Now there are 2 problems :
    1. Valid data is passed in: Though the operation seems to succeed from
    the front end, there aren't any records inserted into the Primary
    table. Secondary and Tertiary tables have the right data present in
    them.
    2. Invalid data is passed in: When the validation fails and the
    transaction is set to rollback, the following exceptions are thrown :
    Exception during commit of transaction: '1030642768442_27'
    weblogic.transaction.RollbackException: Transaction TxC (26691678, xid
    = 1030642768442_27, timeout = 60, txState = Rolledback, root = null
    has been rolled back.Reason: Unknown
    <!-- REST SNIPPED -->
    I searched this ng for previous posts on this problema and indeed
    found quite a few with the same problem. However, they referred to
    this problem as a bug in the earlier service packs of Weblogic such as
    4 and 5. I however use SP9, but still get the same problem.
    Anybody have any ideas on these problems and possible solutions?
    Thanks and regards,
    Pavan

    The problem seems to be related to the Adapter Engine but not sure about the exact reason. As per the last line of the log, either the channel reference was missing or there was some problem with the related service which could be viewed in visual admin. This could have occurred when the channel is initialized for the use. Restart helped because it may have restarted the related services.
    Regards,
    Prateek

  • HT5318 Itunes 10.6.3 will not install in my computer. It says that it has found errors and is rolling back the install. What can I do?  My laptop is also win7 and it did install there.

    I have a Windows 7 OS 64 bit, ZT desktopcomputer with 16meg memory. I have not been able to install any updates
    to itunes to my computer.  It downloads, but then when installing, it looks like it is going to complete the install
    and then it rolls back and says the errors occured and to try again.  I have a win7 64bit HP Laptop that installed
    the itune updates with no problem.  I have to sync my iphone to my Laptop as it will not work with my desktop.
    Please advise.
         Thanks,
               Roger

    Do you have any other drive connected, which has a copy of FCP X?
    I would make a copy of the application in some drive, just in case; then disconnect the drive, delete the application (could use FCS Remover to delete everything related).
    Then, try installing from the purchases tab in the App Store.

Maybe you are looking for