(Error 1415) when connecting NANO to PC and open ITUNES HELP

SO i UDPADATED the newest version of itunes and reconnect my nano and it still says "corrupted" whenever i connect my nano to pc and open the itunes...... WHAT SHOULD I DO!!!

I have been ejecting it. This problem only began recently. I read through about 30 pages of this forum and found someone postoing about the same problem. They said it may be McAfee Viruscan in the background.I'll check that out.

Similar Messages

My iPhone 6 is disabled as I have forgotten my passcode. I have not synced it with any other device/icloud, etc. When I connected it my MacBook and opened iTunes, that is also asking for passcode. Pl help.

My iPhone 6 is disabled as I have forgotten my passcode. I have not synced it with any other device/icloud, etc. When I connected it my MacBook and opened iTunes, that is also asking for passcode. Pl help.

Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode

IPOD CORRUPTED (error 1415) when connecting to pc HELP!

whenever i connected my ipod to my pc and open my itunes, it says "corrupted" and ask me to restore the ipod. Then i tried to restore it but then it says "Unknown Error 1415"...So i reinstall/repair the itunes, restart my computer several times,reconnect the ipod to the computer.... btw, i have the newest version of ITUNE!!!BUT YET IT STILL DOESNT WORK!!!! SO WHAT DO I DO!!!!!!!!!!!

I am having the same problem as well with my 80GB classic. The syncing will start and then freeze at various points during the process. I have received the error -53 message and others as well after this. I have restored my ipod at least 50 times. Once I get the ipod corrupted message, vista will give me a message stating there are disk errors on the ipod drive. I have scanned the drive twice (which takes hours) and just when it is about to be done i get a message "windows unable to complete the format". I tried disabling the USB 2.0 ports to where they "aren't 2.0" and that didn't work either.
I have tried winamp, floola and anapod as well. I get similar errors on those systems as well.
I thought it might be my OS or vista but I borrowed an older ipod mini 4GB and it synced over 500 songs just fine. I also tried an ipod shuffle 1GB and it synced fine as well. I brought my ipod over to a friend's house who has an older computer that runs XP and doesn't have USB 2.0 and it synced music fine.
I have spent hours searching the internet and trying various things. This is the only post I have found so far that people are having the exact same problems as I am. I am just wondering if it is my computer or ipod classic that is the problem.
Thanks for any assistance.

Error message when connecting Nano to computer - please help!

I just started getting an error message when I try to disconnect my Ipod Nano from my computer after it's done charging/updating. The message tells me the device can't be stopped because other programs are utilizing files on my nano.
I tried restarting my computer, but it froze. It's happened twice now and I have had to disconnect it when it says not to. Please help!

I have been ejecting it. This problem only began recently. I read through about 30 pages of this forum and found someone postoing about the same problem. They said it may be McAfee Viruscan in the background.I'll check that out.

USB Power Error Message When Connecting NANO

Windows XP Pro on desktop computer gave an error message that the USB port power too high or something to that effect. This has happened three times with Nano. Purchased the Nano only two days ago. I also connected the Nano to my Windows laptop to charge and it bucked the laptop battery and shut it down. Is this normal? Should I just return the Nano?

Normally the error you get is about the port not having enough power, so I don't know how it could be too high. Not sure what you mean by "bucked the battery" either, but it doesn't sound good. If it were me, I'd consider swapping the iPod for a new one to see if it's defective.

Windows 8.1 probably the disc is full- error message when i try to save and open a file i downloaded.

I am trying to download a program from the internet and I save it to my download folder. when I try to save it or open it, I get an error message saying probably the disc is full. this is a new computer with plenty of disc space available.

I am trying to download a program from the internet and I save it to my download folder. when I try to save it or open it, I get an error message saying probably the disc is full. this is a new computer with plenty of disc space available.
how much free space on C: do you have available?
you may need a NAS to move some previous downloads too etc
Corsair Carbide 300R with TX850V2
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 660 Ti FTW Signature 2 (GK104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Professional x64
Microsoft Wireless Desktop 2000 & Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play!

TS1368 Extremely frustrated with error message when trying to download apps and updates. HELP please!

I have been trying to download a couple of apps and keep getting the message "cannot connect to iTunes." This is nonsense because I can access both the app store and iTunes directly. I've downloaded other items today with no problem. Now all of a sudden I'm getting this error whenever I try to download an app or update an existing one. And it doesn't help that that it practically takes an act of congress to access a human being to ask a simple question. I would very much appreciate any help I can get in resolving this issue. I have already tried rebooting my iPad and my software is up to date. Haven't tried it with my iPhone yet. Thanks.

You can't use Safari to download iPad apps. Only use iTunes/App Store.
 Cheers, Tom

My phone is stuck on the "connect to itunes" screen, but when i plug it in and open itunes, my device does not pop up.

please help me!!

I have an iPhone 5, just updated software as per itunes notice. the phone is now stuck in the "connect to itunes" mode on the phone, therefore not even started up completly.#
I am going on holiday in 4 hours and need this ............ thanks iphone for screwing it up again

I just got my internet turned back on, and planned on updating my iPod to ios 5. However, when I plugged it in and opened iTunes, iTunes did not show it under devices, even after I updated iTunes to 10.6. It's like it isn't connected.

My iPod says it is carging, but iTunes doesn't say it is. It doesn't even have a devices category on the sidebar.

When I plug it in, it tells me, " iTunes has detected an iPod in Recovery Mode. You must restore this iPod before it can be used with iTunes." I don't have an option to back it up, only to restore it. I'm going to be annoyed if it erases everything, it never told me it would do this if I updated....

My iphone 4s got the error 11 when trying to update software while in itunes help!!

Help!!!!! While trying to update my iphone 4 in itunes, it crashed and i got the error message 11!!! Nothing is happening, it won't restart, I can't turn it off. Nothing will recognize it!!!

It is an entry in the Hosts file. It is not a file.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.

Error message when connecting to iTunes says my new iPad 4 can't be connected as it requires version 10.7 or later. Surely a new iPad already has the latest version, and if it doesn't how do I get it?

Error message when connecting to iTunes says my new iPad 4 can't be connected as it requires version 10.7 or later. Surely a new iPad already has the latest version, and if it doesn't how do I get it?

Not the iPad - your computer must be running iTunes 10.7 in order to sync. It has nothing to do with iTunes on the iPad.
You can download iTunes for your computer here.
http://www.apple.com/itunes/

I have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

i have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

When I connect my iPod nano 7th gen. to my computer and open itunes, there is a message that says the iPod could not be detected. Does anybody know how to fix this issue?

When I connect my iPod nano 7th gen. to my computer and open itunes, there is a message that says the iPod could not be detected. Does anybody know how to fix this issue?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4. Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
7. Check for third-party software conflicts.

When i connect my iphone to my laptop and open itunes it shows my iphone has nothing on it(no music, no movies, etc...) then when i try to sync it says iphone is is full and can only put in a selected amount of songs

when i connect my iphone to my laptop and open itunes it shows my iphone has nothing on it(no music, no movies, etc...) then when i try to sync it says iphone is is full and can only put in a selected amount of songs. Take in mind this is my first time to sync with this laptop(HP 15 ENVY) and as well my laptop is just brand new. just got it a week ago. so how do i fix this prob. and also when i open my itunes store and then view my account it says error occurred either debug it through Microsoft visual studio or close program. I tired copying all the .dll files to the itunes folder didn't help

I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535

Error message when connecting to Itunes

Keep getting this error message when connecting.
[IMG]http://img813.imageshack.us/img813/2214/ipod.png[/IMG]
I have uninstalled and reinstalled twice now.
Its an Ipod Touch 8GB with front and back camera.
Thanks

If pic doesnt work it says
"This Ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install Itunes again."

(Error 1415) when connecting NANO to PC and open ITUNES HELP

Similar Messages

Maybe you are looking for