ERROR 14614 on Front End when testing with Remote Connectivity Analyzer

Hello forum
Does the Lync Remote Connectivity Analyzer not support 128 encryption?
Reason im asking is the following:
When I test my Lync edge server. I get the following error on the RCA result page: RegisterException.
After this error on the RCA, the event 14614 is logged on my Standard Edition Front end server.
INFO:
User authentication with NTLM protocol failed with error SEC_E_UNSUPPORTED_FUNCTION. This indicates a potential mismatch between security policy settings on the client and server computers.
Cause: This error can occur if the settings in "Network security: Minimum session security for NTLM SSP based (including secure RPC) clients" policy on the client computer are not the same as the settings in the "Network security: Minimum
session security for NTLM SSP based (including secure RPC) servers" policy on this server. By default, the "Require 128-bit encryption" setting is disabled for computers running Windows Server 2008, Windows Vista, Windows Server 2003,
Windows 2000 Server, or Windows XP. For computers running Windows 7 or Windows Server 2008 R2, this setting enabled by default.
Resolution:
Ensure that the "Network security: Minimum session security for NTLM SSP based (including secure RPC) clients" policy settings on the computers from which users log on are the same as "Network security: Minimum session security for NTLM SSP based
(including secure RPC) servers" policy settings on this server.
All of our Lync servers are running on Windows 2012 R2. So why this error from the RCA?

Please check your settings on the client and on the server.
I know, this is a old blog info, but it discribed the problem.
http://blogs.technet.com/b/rogulati/archive/2011/04/30/lync-2010-ntlm-sec-policy-mismatch-error-cannot-sign-from-xp-clients.aspx
http://blog.ucomsgeek.com/2011/01/lync-2010-ntlm-client-authentication.html
regards Holger Technical Specialist UC
Thanks for the answer, but in this case the "Client" is the Remote Connectivity Analyzer. So my question was, why is it not working with that? Does the RCA not support 128 bit?

Similar Messages

Urgent!!Error in the front end when trying to view a report

Hi All,
I am getting this error when I am trying to view a report in the front-end.
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)
Please let me know if you have any ideas.
Thanks.
Vinay Sai Konduru

Have a look at your login crenditals in the Connection Pool.
Regards
John
http://obiee101.blogspot.com/

The Lync Server Front-End service terminated with service-specific error %%-1008124893.

Hello, everyone
I've installed Lync Server 2010. There was no error during installation. But when i start Lync Server Front End Server, i'm getting following error:
The Lync Server Front-End service terminated with service-specific error %%-1008124893.
In event viewer:
The evaluation period for Microsoft Lync Server 2010 has expired. Please upgrade from the evaluation version to the fully licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Cause: The evaluation period for Microsoft Lync Server 2010 has expired.
I've upgraded Lync Server according to http://technet.microsoft.com/en-us/library/gg521005.aspx?ppud=4
Also I've installed all Lync Server updates.
But I still could not start Lync Front End Sever. How can I solve this problem?
Thanks

Hi,
Can you try to run
start-cswindowsservice -report c:\report.html
and post the report so we can have more information about your problem ?
Regards,
Adrian TUPPER - ABC Systemes - http://thelyncexperience.blog.com/ If answer is helpful, please hit the green arrow on the left, or mark as answer Thank you

The installation of SAP Front-End components failed with 95 errors.

I tried to install SAP GUI 7.20 on Windows Vista X64. And I got this error message:
The installation of SAP Front-End components failed with 95 errors.
This 7.20 version used to run on this operating system fine. I reinstalled the OS, and now I got this.

Hi,
I suppose you reinstalled the same OS.
Did you install the JSDK (java) afterwards. As you must be aware Java is a pre-requisite for the SAP Frontend.
Also make sure you have set the environment variables after installing java.
Further documentation, the SAP installation manual can be found in the u201CDOCUu201D folder of the installation software.
Regards,
Rohan.

Front-End Loopback Test on Catalyst 2955 causes connected hardware to "die"

I have recently purchased a Cisco Catalyst model WS-2955C-12 switch. During POST (boot), the console reports that the switch undergoes what is known as a "FRONT-END LOOPBACK TEST". During this test the 14 port lights on the device light up amber for a moment, connectivity is lost, and after a second or two the lights go off and connectivity returns. We've found that the moment the lights go off at the end of this test, if we have a specific device (with a specific ethernet chip) directly connected to the switch the ethernet chip is adversely affected by this test - the device "goes dark" and is not capable of communicating with anything (including other switches, routers, etc...) until it is power-cycled. What exactly does this FRONT-END LOOPBACK TEST do, and what does it send across the wire that could be causing my ethernet chip onboard the device to go bonkers?
Thanks!
-Danny

Cisco IOS Release 12.1(22)EA1 runs on Catalyst 2955, Catalyst 2950, and Catalyst 2940 switches.
Review the new software features, open caveats, and resolved caveats sections for information specific to your switch. The information in this document refers to all the switches, unless otherwise noted.
These release notes include important information about this release and any limitations, restrictions, and caveats that apply to it. To verify that these are the correct release notes for your switch:
If you are installing a new switch, refer to the Cisco IOS release label on the rear panel of your switch.
If your switch is running, you can use the show version user EXEC command. See the "Finding the Software Version and Feature Set" section.
If you are upgrading to a new release, refer to the software upgrade filename for the Cisco IOS version.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12122ea1/ol554602.htm

How Front End pool deals with fail over to keep user state?

   Hello to all, I searched a lot of articles to understand how Lync 2010 keeps user state if a fail happens in a Front Pool node, but didn't find anything clear.
     I found a MS info. about ths topic : " The Front End Servers maintain transient information—such as logged-on state and control information for an IM, Web, or audio/video (A/V) conference—only for the duration of a user’s session.
This configuration
is an advantage because in the event of a Front End Server failure, the clients connected to that server can quickly reconnect to another Front End Server that belongs to the same Front End pool. "
    As I read, the client uses DNS to reconnect to another Front End in the pool. When it reconnects to an available server, does he lose what he/she was doing at Lync client? Can the server that is now hosting his section recover all
"user's session data"? Is positive, how?
   Regards, EEOC.

The presence information and other dynamic user data is stored in the RTCDYN database on the backend SQL database in a 2010 pool:
http://blog.insidelync.com/2011/04/the-lync-server-databases/ If you fail over to another pool member, this pool member has access to the same data.
Ongoing conversations and the like are cached at the workstation.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

FireFox message of my bank website using 5 years: you can tell Firefox to start trusting this site's identification. Even if you trust the site, this error could mean that someone is tampering with your connection. Don't add an exception

FireFox message of my bank website using 5 years: you
can tell Firefox to start trusting this site's identification.
Even if you trust the site, this error could mean that someone is
tampering with your connection. Don't add an exception

send me email

General Error has occured.Object does not exist error in the front end

Hai,
In the rpd , I have imported 2 new tables to the exisiting connection pool from 2 diferent schemas and used those 2 tables to the existing model in the physical layer and given joins .
I did everything till the presentation layer and when I am trying to pull data from the added table in the front end it is giving me error saying that the oject does not exist.
Also I tried to see the data in the physical layer in rpd and the same error came up
Any solutions please

863997 wrote:
Hai,
In the rpd , I have imported 2 new tables to the exisiting connection pool from 2 diferent schemas and used those 2 tables to the existing model in the physical layer and given joins .
I did everything till the presentation layer and when I am trying to pull data from the added table in the front end it is giving me error saying that the oject does not exist.
Also I tried to see the data in the physical layer in rpd and the same error came up
Any solutions pleaseOnce again you are invited to How to extract the keys from the ER STUDIO.
Seriously: I am genuinely interested in why members of the BI and eBS community with no history of using the APEX forum persistently use this as a dumping ground for off-the-wall requests. If we can find this out then there might be a (remote) possibility of getting something changed on OTN to prevent it and avoid wasting everyone's time.

Front-end web servers with different OS

Hi everybody,
is it possible to build a SharePoint farm with front-ends with different OS (W2k8R2 & W2012)?
Thanks in advance,
Sergio Calleja

There should be no issues in having two WFEs running with different operating systems. If MOSS 2007 version can successfully support a mix environment of having two different OS on WFE then why not SharePoint 2013.
But I recommend to set a test environment first and test your mixed setup environment. This will gain you more confidence and sure possibility to implement it on production. Else I see no compatibility issues even if you directly implement the mixed WFE
environment on SharePoint 2013 production.
Please remember to upvote if it helps you or
click 'Mark as Answer' if the reply answers your query.

How to display error message in front end application

Hi Expert,
I have one concurrent program that used to activate and deactivate the responsibilities ,
I want that if any error occured in this program then how can I display the error message in application front end.
Thanks in advance.

Hi Paul,
In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
Regards,
Noel

Can't printing in front-end when implement LOCL access method 'G'

We are implementing ECC5.0 and print Purchase Order in normal status.But in recent,user print PO by long printer name with some trouble.So we check the notes,and it recommand us to implement access method 'G'.It seems every thing is OK on front-end printing.Still not work for printing PO on front-end output immediate.If we choose short printer name and access method 'F',it work fine.But SAP will no longer develop method 'F'.Please advise it.

SAP PO is using background printing. SAP frontend print doesn't support background printing.
As per SAP Frontend document, You cannot perform front-end printing in the background, as there is not connection to the front end.
For this, you need to configure network printer.
Thanks,
Miral.

SAPGUI 7.10 New ABAP Front End Editor Problem with CTRL + 5

Hi Guys,
I am using SAPGUI 7.10 patch 19 with new front-end editor and I am not able to use CTRL + 5 (on Numeric pad) to select whole program. As soon as I change the editor to use old front end editor I am able to use CTRL + 5.
Please help me to incorporate CTRL + 5 in New frond end editor.
Thanks,

Try <ctrl>+a
Regards, Uwe

Date/Time erros when working with Database Connectivity toolkit

Hi!,
We are observing errors with date/time when working with LV. The error occurs when the system datetime format is set such that day precedes month (e.g. dd/mm/yyyy). Our VI uses LV 7.1, Database Connectivity 1.0 and SQL Server 2000 on a Win2000 machine.
Problem details
Our database in SQL server has a table having columns with data type "datetime"
If the system date format (as set in control panel) is "mm/dd/yyyy", the 'insert into database' vi works fine. This function inserts the date and time (among other things) into the above mentioned table.
However, when the system datetime is set to dd/mm/yyyy we start receiving error that date and time is beyond range for dates in which the date had the day field greater than 12 (e.g. 23/10/2005). With the same settings, if the date is such that day field is equal or less than 12 (e.g. 03/10/2005), we do not receive an error but the date is interpreted as 10 March 2005 rather than 03 September 2005.
Clearly LV (or is it SQL) is mistaking the day field as month.
We have taken care that when sending and receiving date, the format date and time string is set as per system settings.
Thus, if system setting is "dd/mm/yyyy" our format string is "%d/%m/%Y"
And if the setting is "mm/dd/yyyy" our format string is"%m/%d/%Y"
Any help on problem cause and cure is welcome.
Thanks,
Gurdas
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

Hi Xu,
You answer led me to some very interesting fact finding on how SQL server handles date and time. I have attached a zip file which contains webpages that throw more light on this issue.
The attached pages tell me that SQL has an inbuilt date/time reference format. The default in mm/dd/yyyy. Which explains why my VI worked when I used that format to write to SQL.
However there is a catch:
SQL expects the date/time to be in its inbuilt reference format when you WRITE data to SQL. If the date/time is in a different format, better tell SQL about it by using say the SET command you mentioned.
BUT what about the date/time format when you are reading data from SQL?
Our finding is that SQL sends date/time string in the system date format when you READ from SQL !!! That is very surprising behaviour (why differentiate between write and read?).
Is our finding correct?
So, we adopted the following simple strategy (yet to be fully tested):
1) Whenever we write date/time to SQL, the string is formatted as mm/dd/yyyy. Presently, the user's SQL server is in the default state. Caveat is that if the user changes SQL date/time from default (which is mm/dd/yyyy) to anything else, our software will give errors. But then he changed it ;-)
2) When we read date/time from SQL we format the string as per system date/time format.
I know this is not very robust coding. But assuming the user keeps his SQL in the current setting, should we expect smooth working?
In other words, are there any errors and/or flaws in our strategy?
Thanks,
Gurdas
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

"PLS-00201: identifier 'JAVA_XA.XA_START_NEW' must be declared" when deploying with XA connection pools

I get the error message "PLS-00201: identifier 'JAVA_XA.XA_START_NEW' must
          be declared" when I try to deploy a J2EE application which uses XA pools and
          TX datasources.
          I am not sure how to setup my system for running with XA. I have tried to
          see what other people have done in this new group and copied from them.
          My connection pools looks like this:
          <JDBCConnectionPool
          DriverName="oracle.jdbc.xa.client.OracleXADataSource"
          MaxCapacity="5" Name="alba"
          Properties="user=<user>;url=jdbc:oracle:thin:@haux01:1526:UTV8;password=<pas
          sword>;dataSourceName=alba"
          RefreshMinutes="60" Targets="myserver"
          URL="jdbc:oracle:thin:@haux01:1526:UTV8"/>
          My data sources look like this:
          <JDBCTxDataSource JNDIName="alba_ora817_localsl"
          Name="alba_ora817_localsl" PoolName="alba" Targets="myserver"/>
          The database is oracle 8.1.7.2.0
          The reason I started trying to use XA in the first place was when I tried to
          connect to two databases in the same transaction. I then got an error
          message saying: java.sql.SQLException: Connection has already been created
          in this tx context for pool named <first pool name>. Illegal attempt to
          create connection from another pool: <second pool name>. As I have
          understood, XA pools should fix this problem.
          /Eirik


Hi Eirik
          Is your Oracle database Server setup for XA? Check Oracle Docs on how to do
          that.
          you need to make sure this script is run on the server, initjvm.sql (It
          should be in your oracle installation rdbms scripts) and then grant select
          permission on dba_pending_transactions.
          hth
          sree
          "newsgroups.bea.com" <[email protected]> wrote in message
          news:[email protected]...
          > I get the error message "PLS-00201: identifier 'JAVA_XA.XA_START_NEW' must
          > be declared" when I try to deploy a J2EE application which uses XA pools
          and
          > TX datasources.
          > I am not sure how to setup my system for running with XA. I have tried to
          > see what other people have done in this new group and copied from them.
          > My connection pools looks like this:
          > <JDBCConnectionPool
          > DriverName="oracle.jdbc.xa.client.OracleXADataSource"
          > MaxCapacity="5" Name="alba"
          >
          >
          Properties="user=<user>;url=jdbc:oracle:thin:@haux01:1526:UTV8;password=<pas
          > sword>;dataSourceName=alba"
          > RefreshMinutes="60" Targets="myserver"
          > URL="jdbc:oracle:thin:@haux01:1526:UTV8"/>
          >
          > My data sources look like this:
          > <JDBCTxDataSource JNDIName="alba_ora817_localsl"
          > Name="alba_ora817_localsl" PoolName="alba" Targets="myserver"/>
          >
          > The database is oracle 8.1.7.2.0
          >
          > The reason I started trying to use XA in the first place was when I tried
          to
          > connect to two databases in the same transaction. I then got an error
          > message saying: java.sql.SQLException: Connection has already been created
          > in this tx context for pool named <first pool name>. Illegal attempt to
          > create connection from another pool: <second pool name>. As I have
          > understood, XA pools should fix this problem.
          >
          >
          > /Eirik
          >
          >

Can't transfer large files with remote connection

Hi all,
I'm trying to figure out why we can't transfer large files (< 20MB) over a remote connection.
The remote machine is a G5 running 10.4.11, the files reside on a Mac OS X SATA RAID. We are logged into the remote machine via afp with an administrator's account.
We can transfer files smaller than 20 MB with no problem. When we attempt to transfer files larger than 20 MB, we get the "The operation can't be completed because you don't have sufficient permissions for some of the items."
We can transfer large files from the remote machine to this one (a Mac Pro running 10.4.11) no problem.
The console log reports the following error:
NAT Port Mapping (LLQ event port.): timeout
I'm over my head on this one - does anyone have any ideas?
Thanks,
David

I tried both these things with no luck.
The mDNSResponder starts up right after the force quit - is this right?
The following is the console log, which differs from the previous logs where we had the same problem:
DNSServiceProcessResult() returned an error! -65537 - Killing service ref 0x14cb4f70 and its source is FOUND
DNSServiceProcessResult() returned an error! -65537 - Killing service ref 0x14cb3990 and its source is FOUND
DNSServiceProcessResult() returned an error! -65537 - Killing service ref 0x14cb2b80 and its source is FOUND
DNSServiceProcessResult() returned an error! -65537 - Killing service ref 0x14cb1270 and its source is FOUND
Feb 4 06:13:57 Russia mDNSResponder-108.6 (Jul 19 2007 11: 41:28)[951]: starting
Feb 4 06:13:58 Russia mDNSResponder: Adding browse domain local.
In HrOamApplicationGetCommandBars
In HrOamApplicationGetCommandBars
In HrOamApplicationGetCommandBars
Feb 4 06:23:12 Russia mDNSResponder-108.6 (Jul 19 2007 11: 41:28)[970]: starting
Feb 4 06:23:13 Russia mDNSResponder: Adding browse domain local.
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
[442] http://discussions.apple.com/resources/merge line 4046: ReferenceError: Can't find variable: tinyMCE
Thanks,
David

ERROR 14614 on Front End when testing with Remote Connectivity Analyzer

Similar Messages

Maybe you are looking for