Error 1600 depends on what?

hey guys just wanted to know that if i try to restore my ipad 3 to 5.1.1 .. it shows error 1600,, so will it show this error if i try to restore to 6.0.1 which is the latest firmare?

Similar Messages

TS1363 My Itunes says that my Ipod is in recovery mode and needs to be restored but then it doesn't restore because of an error 1600! What do I do?

Help me please!

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
http://support.apple.com/kb/TS3694#error1601

Makeing subforms visible depending on what is selected from the dropdown

Good day all;
Looks like I am batting “0” today. For some reason I am not able to get a number of things to work today… Maybe I should just write this day off as a loss..;>))
Any way; I am trying, without success to get sub forms to become visible depending on what is selected from a dropdown. I have tried using “switch” (see below) but I end up getting the famous “Syntax” error.
I have also tried an “if” (see below) statement, but that did not seem to work either.
What I would like to have happen is when a user selects 1 of 2 choices 1 of 2 sub forms becomes visible.
As well, if the user has initially selected the wrong dropdown and they select now select the correct one, I would like the incorrect sub form to become invisible again.
I would appreciate any help
switch (this.rawValue)
    case "2":
    staffing_inter.presence = "visible";
else
staffing_inter.presence = "hidden";
    break;
IF statement
if(this.rawValue = 2 )
    staffing_inter.presence = "visible"
else{
staffing_inter.presence = "hidden";

Thank you Jono and Niall;
I was looking through the forum and found a post by Niall that appears to be working; I was wondering if this should be used or the one that Jono has posted...
staffing_inter.presence = "hidden";
staffing_inter.preAsence = "hidden";
// Then show the appropriate one
if (this.rawValue == "2") {
staffing_inter.presence = "visible";
else if (this.rawValue == "3") {
    staffing_exter.presence = "visible";

I have an ipad 2, 16GB 3G WiFi, black screen, will not reset, restore or turn-on, keeps prompting error 1600 when trying to restore, but when other ipad 2 plugged in itunes works fine. Any idea's on how to resolve?

I have an ipad 2, 16GB 3G WiFi, worked perfectly, but now black screen, will not reset, restore or turn-on, keeps prompting error 1600 when trying to restore from recovery mode, but when other ipad 2 plugged in itunes works fine. Any idea's on how to resolve?
I have tried multiple laptops with both units, re-installed Itunes, same error message on one of the units but ok on the other. Thinking I have a defective Ipad 2, any ideas on what to do is greatly appreciated.

Tried Google? iPad error 1600

Is there a way to create a drop down menu with an automatic answer dependent on what is chosen?

Is there a way to create a drop down menu with an automatic answer dependent on what is chosen? An if-then statement perhaps? I am looking to add over 100 drop down options and would like to have a message automatically pop up depending one which option they chose. Thank you.

Hi,
You would use the skip logic to conditionally show form items based on the selection within the drop-down menu. Here's a link to a description of the feature in our help documentation:
http://help.adobe.com/en_US/formscentral/using/WSd789abd336388b1642c7fce012da94afe4f-8000. html#WS0faeceb8c23f5d60-774f03e3131ddc76d7d-8000
Regards,
Brian

I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

I downloaded Blue Fire Reader and it requested an adobe id. I clicked on the link that was in the error message stated http//adeactivateadobe.com. Found out that if the date and time on my Ipad is wrong that it won't let me download a book. I was off 5 hours. I reset my clock settings and adobe id let me download a book from the library. I am back to using Overdrive and adobe again on my ipad.
Thank you.

My iPod doesn't sync it keeps coming up with the message "The iPod 'iPod Nano' cannot be synced. An unknown error occurred (13019)." What does this mean and how can I fix it.

My iPod doesn't sync it keeps coming up with the message "The iPod 'iPod Nano' cannot be synced. An unknown error occurred (13019)." What does this mean and how can I fix it?

I am getting the same error message. Have you figured it out?

I renamed a power point a file and now when I try to open it it keeps giving me the error code -108. If I try to open or copy it say: The operation can't be completed because one or more required items can't be found. (Error code -43). What do I do?

I renamed a power point a file and now when I try to open it it keeps giving me the error code -108. If I try to open or copy it say: The operation can’t be completed because one or more required items can’t be found. (Error code -43). What do I do?

Post in Microsoft's Powerpoint (Mac) message boards.

Hi, We have an application built using HTMl 5 and Javascript running on IPad2, iOS5.1 Safari 5.1. When we try to download a file(.pvw file) in that application safari throws "Download failed" error. Please suggest what needs to be done.

Hi,
We have an application built using HTMl 5 and Javascript running on IPad2, iOS5.1 Safari 5.1.
When a file url is clicked instead of asking for Save or Open or Cancel options, the file gets opened on IPad by default.
Is this default behaviour which cannot be changed or can it be configured to ask user preference?
When we try to download a file(.pvw file -> a model file) in the above application, safari throws "Download failed" error.
Please suggest what needs to be done.
Regards,
Pramod

Safari on an iPad in general does not allow downloading of files. That's a safety precaution in the iOS SDK to keep unauthorized content off of iOS devices. Safari will open from the web site file types that it can handle, but direct downloading isn't normal behavior, and I don't believe the behavior can be changed, though you can try asking in the developer forum, either here or the one to which you have access as a member of Apple's iOS developer program.
Regards.

Iphone 4, purhcased 4/12, reluctant to turn on after fully expended battery in the past, now will not power on, communicate w/ itunes, tried restore -error 3194, then error 1600. help me please...do I have a warranty?

I purchased an Iphone 4 in April of 2012. I always keep it on and charge it every night. I have had some trouble turning, a couple of times, in the past. It was simply reluctant to turn on after allowing the battery to be completely expended and has behaved the same way after being manually turned off. I have again allowed the battery to completly die and turn off the phone. This time it will not turn on at all. I have tried various combinations of pressing and holding home and power to no avail. I plugged it in to the computer, but Itunes will not recognize it as my phone. Itunes is labeling it "Iphone" and has requested that I restore the phone in order to use it with Itunes. Itunes states that "has detected an Iphone in recovery mode". I, reluctantly, attempted to restore the phone. After waiting quite a while on a "software update" to download, it said preparing Iphone for restore and then said "unable to restore Iphone, unknown error - 3194". I read, online, that I needed the most recent version of itunes in order to restore. So I upgraded Itunes and restarted the compluter. On the second, and all subsequent attempts to complete the restoration, I am prompted with a message stating "unable to restore IPhone, unknown error - 1600". My computer also attempted, and I believe, successfully, installed new device driver software for iphone4 (DFU mode). Any assistance would be greatly appreciated. Also is my phone, purchased 4/12, under any service or replacement warranty. I truly feel it should be easier to turn on and I did not even want to restore the phone, I just need to use it.
Thank you,
Geoffrey

I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?

Just upgraded to latest iTunes for Windows. Rebooted the PC as required. When I bring up iTunes I get a pop message saying "An unknown error occured (-42110)". What does that mean?

Just upgraded to latest iTunes for Windows. Rebooted the PC as required after the update. When I start iTunes I get a popup message saying "An unknown error occured (-42110)."
What does it mean?
How do I fix it?
Thanks!

Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s:
iTunes: Advanced iTunes Store troubleshooting

While importing a CD into my iTunes library I kept getting the following error message- iTunes library cannot be saved- An unknown error occurred (-54). What does this error mean and what can I do about it??

While importing a CD into my iTunes library I kept getting the following error message- iTunes cannot be saved- An unknown error occurred (-54). what does this error mean and what can I do about it??

The CD I imported (in the above post) is now not in my iTunes library. Any help would be appreciated .

I have a Windows 7 laptop, and recently the hardrive broke. I got it repaired and ever since, my ipod touch 4th gen does not connect to itunes and an unknown error (0xE8000012) appears. What do I do?

I have a Windows 7 laptop, and recently the hardrive broke. I got it repaired and ever since, my ipod touch 4th gen does not connect to itunes and an unknown error (0xE8000012) appears. What do I do?

try to restore in itunes bye putting in recovey mode turn the ipod off press the home button and plug in the ipod into the computer. an itunes shuld see it in recovery mode and click restore. and that should do the trick.

Can not update Photoshop CC (2014) and receive error message U43M1D206. What do I do?

Can not update Photoshop CC (2014) and receive error message U43M1D206. What do I do?

Bump
I am also having the same issue with a lot of the softwares i have downloaded. Its unable to download the initial patch update.

IPhone 3GS won't restore (error 1600 or "not eligible for this build") no apple logo, recognised in DFU mode.

My iPhone 3GS decided to turn itself off (on 30% battery) yesterday and hasn't turned on since. After some testing (hard resets, DFU mode), tiny umbrella recognises it in DFU mode, as does Redsn0w. neither devices can successfully kick the phone out of the restore loop.
The screen stays blank throughout, no apple logo, connect to itunes logo etc. however every now and then the charging sign will appear (empty battery with a little bit filled (red)). even if i unplug it from my iMac the charging symbol stays there.
once I get the phone in DFU mode iTunes recognises that there is a phone connected that needs to be restored, it doesn't matter if I click restore or option + restore the process will fail on Error 1600 or "this device is not eligible for this build".
My iPhone is not unlocked or jailbroken. Before the incident with the coffee I managed to synchronize and update its firmware as indicated by iTunes. The latest update for my iPhone was iOS 5 firmware. My intent is not to unlock or jailbrake the device, just to make it work again.
Here are some things I've tried since:
1. Exiting recovery mode via Tinyumbrella
2. Entering DFU mode via Redsn0w
3. Shift + Restore and using firmwares from 5.0 to 5.0.1 to upgrade my iPhone.
4. Remove hosts to my Host file (in relation to the "device not eligible for this build" issue)
5. Try redsn0w and use IPSW to see if it is recognized by iTunes (iTunes recognizes the iPhone but then at the very last minute shows error 1600.
6. Save SHSH files and use Tinyumbrella to uploaded them to my iPhone.
I would really appreciate if someone can help me on this. I might be doing something wrong or maybe not even considering the right steps to solve this issue. I don't know if there are missing drivers that are preventing the device from communicating with iTunes properly. Of some tool that can be used to correct this problem. It may or may not be fixable but I think it is worth the try.
Thanks very much.

please ignore the comment about coffee. Someone posted a very similar question apart from he spilt coffee on his phone, I didn't.

Error 1600 depends on what?

Similar Messages

Maybe you are looking for