Error 1706 No valid source could be found for adobe reader x

Error 1706 No valid source could be found for productAdobe reader X (10.1.4) Install cannot continue.
On programs that need adobe reader, the page will not come up.
I tried to restoring my system to a point before when adobe was working, and tried to reinstall adobe reader.
the download stops at 80% and reports: cannot find file  AdbeRdr1010_en_us(1).msi

Remove your current installed Reader using http://labs.adobe.com/downloads/acrobatcleaner.html
then download and run the full installer from http://get.adobe.com/reader/enterprise/

Similar Messages

  • HP Scanjet G4050. Get "Error 1706.No valid source could be found for product ScannerCopy...."

    I just bought a new Scanjet G4050 and when I try to install the software I get an error message and the software will not install. Error message is:"Error 1706.No valid source could be found for product ScannerCopy. The Windows Installer cannot continue." During the install, I was prompted to enter a CD or other location to load ScannerCopy.
    I had an older version of this same Scanjet G4050 working on my PC about a year ago. My PC is running Vista 64.
    Any ideas how I can get the software to successfully load? Any ideas of where I can get this "ScannerCopy" that the software is asking for? 

    Remove your current installed Reader using http://labs.adobe.com/downloads/acrobatcleaner.html
    then download and run the full installer from http://get.adobe.com/reader/enterprise/

  • SMAsetup.msi - Network Resource Error & Error 1706 "No Valid Source for SMA"

    Hi all,
    I recently did a system migration update for my r61e, but it didn't complete. I kept getting an error about SMAsetup.msi not being found. Now every time I start my laptop, the install tries kicking off & then I get the same errors (see below). I've google searched this & found very little to point me in the direction of resolution, so if anyone can tell me how to fix this that would be great.
    Michael.
    Error 1: The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package SMAsetup.msi (I clicked OK to no avail, & I searched my computer for SMAsetup.msi but again to no avail. Google search yielded nothing of use also).
    Error 2: Error 1706. No valid source could be found for Product System Migration Assistant. The Windows Installer cannot continue. (I searched Google for this but could find no helpful info).
    Moderator Note; subject edited.

    Hi everybody,
    I am so gald to give you the best solution on this problem,
    Just download System Migartion Assistance from Lenovo website and choose Uninstall, then reboot your PC !
    That's all,
    please give me your feedback if this soultion worked,
    Thanks,
    Majid

  • No valid sequence could be found for the set of patches adobe acrobat x standard (10.1.3)

    I have tried updating and/or repairing Adobe Acrobat X standard but receive the error message "no valid sequence could be found for the set of patches" I am using adobe acrobat x standard (10.1.3) running windows 7.The software came pre-installed and so I have the CD key but no CD. Thanks Nick

    Hi Anoop.
    I have tried the Help>Check for updates option and receive the same error message accompanied by error code 1648 (not sure if this helps). I have tried Help>Repair & Control Panel>Repair and receive the same "no valid sequence could be found for the set of patches".
     

  • Cannot update.  Get error message 1648, "no valid sequence could be found for the set of patches."

    Cannot update.  Get error message 1648, "no valid sequence could be found for the set of patches."

    Uninstall the corrupt Reader version using http://labs.adobe.com/downloads/acrobatcleaner.html then download and install the latest Reader from http://get.adobe.com/reader/enterprise/

  • No valid sequence could be found for the set of patches

    I get the following error message when installing Acrobat 8.0 Standard:
    "Windows Installer" No valid sequence could be found for the set of patches."
    The CD installed with no problems on another PC. Both PC are running XP Pro SP2. The virus scanner was disabled before installation. I also had uninstalled a older version of Acrobat and Reader before installation. Even attempted to install by launching the setup.exe file.
    Thanks.
    George

    This appears to be caused when nls codepages are missing from Windows..
    I use nLite to clear items out of my installations, and because these entries are missing, it fails to install. Apparently Microsoft Office has the same issue..
    I don't have a solution yet, but I am searching. This should help Adobe answer the question, though..

  • No valid sequence could be found for the set of patches."adobe 10.1.1"

    Tried to up grade when I was asked to a while ago and when I did nothing would work, so I uninstalled the old adobe reader and tried again and got the message " no valid sequence could be found for the set of patches" the download continues and says it has installed but it hasent. everything I use needs adobe reader for me to see statment's etc so I cant get any thing to work I tried removing everything I could belonging to adobe and tried to install again but this just keeps happening. im running on windows xp 32 bit its just a home computer.
    Please can you help me.

    The following article while old fixed the issue for me. Registry editing is required so please backup your registry before making any changes.
    http://support.microsoft.com/kb/913754
    A reboot was required before reinstall of Reader succeeded.

  • Successfully downloaded and installed Adobe Reader on my PC ... ( Windows 7 home premium (64 bit) OS).  Cannot print adobe documents... Error message indicates need to install plug-in for adobe reader for windows 7 home premium (64 bit) OS               

    Cannot print adobe documents ... Error message indicates a need to install plug-in for adobe reader.
    Please advise how/where to locate the required adobe reader plug-in...
    Thank you,
    Joe Curcio

    What is the full and exact message you are getting?
    If the PDF contains Rich Media, the Flash Player plugin may be required: http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player.exe

  • Reader 10.1.1 install error--"No valid sequence could be found for the set of patches."

    At 96% completion of Reader install Windows gives above error msg. I close that window, then new window says "Installation complete." I click finish. New window opens with "Installation successful - you are now running Adobe Reader." Yet Reader does not show up as installed; unable to open pdfs. Thanks for any help.

    Solution provided by pwillener on similar problem was tried. Reader downloaded, installed and seems to be working fine now.............   Many thanks !! 

  • No valid source of supply found for material ABC plant Plant1

    Hi ,
    I am using the Tcode kkf7 (product cost collector ) for costing a material XYZ(finished prod) , it throughts an error that the material ABC  which is an sub assembly of XYZ of type E has no valid source of supply.
    Regards,
    Reddy

    hi
    you have to maintain purchase info records for subcontracting material, TCODE Me11, procurement type in material master F, special procurement type 30.
    In the costing variant assigned check valuation variant strategy for subcontracting
    krishna

  • Acrobat X Standard "No valid sequence could be found for the set update. Error 1648"

    I'm getting this error trying to install an update.
    I followed this process:
    1. Cleanup Acrobat (http://labs.adobe.com/downloads/acrobatcleaner.html).
    2. Delete everything from C:\ProgramData\Adobe\ARM
    3. Delete C:\Windows\Installer\10e2413d.msp
         [I didn't do this step. No file with this name exists in this folder. I know it's hidden. I can see the folder and a bunch of other files].
    4. Install Acrobat X Standard.
    The install went perfectly. The update did not. Tried twice, including reboots.
    Any help is appreciated. But I have no technical knowledge. Easy, step-by-step instructions please.
    PS Windows 7, Office 2013, Intel i7, 8GB RAM, system is running excellently... except for this.
    Thank you,
    Thomas Scott

    Bill and all,
    I tried the steps I outlined above for the third time, more carefully going step-by-step and a reboot between each. The update installed this time.
    I was using the update from Help > Check for Updates... Is that the right way to do it?
    Good idea on the anti-virus. I have Microsoft Security Essentials. It's never interfered with my Adobe Acrobat or Photoshop updates before. But certainly can't hurt to turn that off to be sure it's not causing a problem this time.
    I just did a reboot and selected Help > Check for Updates... again. No updates available and running 10.1.9. So it went to the latest update all by itself.
    Thanks for the advice. I'm replying here for that and so others with the same problem may have one possible solution.
    Sincerely,
    Tom Scott

  • No valid BOM could be found

    After costing i have got some errors for some of the materials..
    FOr a material A, the error is No valid BOM could be found for material B( here B is a component of A).
    Like this for many materials,many errors..
    Some of the materials are with HALb and some are ROH...
    If its only halb,THen i could get a reason... but it s having ROH also..
    Please help me out in understanding..

    Hi,
    You are running the cost estimate of a finished product which finally comes out based on some raw materials and semi finished goods from a Production Order.  This cost estimate is linked to a costing sheet which calculates the raw material consumed
    for production and its production cost.  These costs are settled through the cost component structure OKTZ.  Each of the
    production order is linked to Bill of Materials that is all those materials which are required for production and the production
    process operations are defined in Routing.  Each of these production orders carries a costing variant planned and costing variant actual to calculate the cost.  The costing variant has its own attributes like valuation variant, date control etc.  The valuation variant defines in what sequence the material has to be valuated and the costing sheet is assigned to this valuation variant for the plant.
    Further, BOM usage and routing are assigned in the valuation variant.
    The valuation variant checks the materials during your costing run, to take the price and whether it is one of the component in
    the bill of materials for the production order.  Hence during costing run if the materials is not one of the component in BOM, it cannot
    run the cost estimate properly.
    Best Regards,
    Sadashivan

  • Project Server 2010 - Unable to open project, no valid Project Detail Page could be found for the project error

    I have a workflow being deployed for the first time on a farm. When I create a project with an EPT connected to the workflow it runs and can enter the required field in a PDP.  Then I Submit the workflow to go to the next stage and I get the "Unable
    to open project, no valid Project Detail Page could be found for the project" error.  After that the project is stuck on the same error.  All of the 18 stages have PDP and Schedules assigned to them.
    Any ideas on why the workflow cannot see the PDPs?  Is there a farm permissions that I am missing?  Thanks!

    Hi David,
    It starts to be a bit technical for me, but here is what I found on the web (seems to be an authentication issue with Sharepoint 2010):
    http://social.technet.microsoft.com/Forums/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the
    http://social.msdn.microsoft.com/Forums/silverlight/en-US/5cc70ff6-50d9-4cd3-b092-12007f4e495b/response-message-contenttypebindingtype-mismatch
    http://stackoverflow.com/questions/5263150/the-content-type-text-html-charset-utf-8-of-the-response-message-does-not-match
    Hope it will help you going forward in resolving your issue.
    Guillaume Rouyre - MBA, MCP, MCTS

  • I*sqlplus: Internal error (no valid library could be found)

    Hello
    I have installed Oracle 8.1.7 on Windows NT
    and Oracle 8.1.7 on Sun Sparc Solaris.
    On Windows NT, I have installed i*sqlplus.
    However, when connecting from browser
    in the index file
    I've given a valid username/password of
    a database in Oracle 8.1.7 on Sun Sparc
    and a connect string to the database
    on Oracle 8.1.7 on Sun Sparc.
    This connect string is created using
    Net 8 assistant and this connect string
    is on the Windows NT with Oracle 8.1.7.
    However, instead of connecting I
    am getting the error
    Internal error : (no valid library could be found)
    Can you please help me?
    Thanks

    Cyril,
    Can you connect to the database using the command line version of SQL*Plus? If so, you're using the correct syntax.
    It sounds like iSQL*Plus is not set up correctly. Do you have the necessary 8.1.7 components on the NT machine (Oracle HTTP Server, Net8, SQL*Plus)?
    Review the installation documentation, and/or post more specific information on your set up.
    Alison
    iSQL*Plus Team

  • ISQL*Plus: Internal error (no valid library could be found)

    I install iSQL*PLUS on middle tier (9i AS 1.0.2.1) according to documentation, when I trying to connect I am getting Internal error (no valid library could be found). The TNSNAMES.ORA file is correct.
    Any suggestions will be highly appreciated.

    My first suggestion is to use the HTTP listener on the RDBMS bundle. This is what iSQL*Plus 8.1.7 Beta was built for.
    The HTTP servers on the iAS and Database releases require mods to be compiled differently.
    - CJ

Maybe you are looking for