Error 2 for write/read access to a file. File = /usr/sap/SID/SYS/global/999

hi
when i am checking update statistics in db13 it is not creating any log information, and more over it is creating error in sm21 like
Error 2 for write/read access to a file. File = /usr/sap/<SID>/SYS/global/999JOBLG/0001X06000603X23459.
can any one help me.
regards
subhani.

Duplicate post
Read and Follow the Forum Rules

Similar Messages

PDF files are stored to /usr/sap/ SID SYS/global

True or False --> When a PDF file is generated from within SAP the spool file is stored in /usr/sap/<SID>SYS/global
After a recent upgrade to ECC 6 I'm noticing that a large number of SPOOL* files are in the global directory. Each spool file has 3 components a SPOOL.cfg, SPOOL.xfd and a SPOOL*.ps file .When I examine the spool number using SP01 I see that these jobs all have an output type of PDF. Only files of type PDF appear in the global directory. It does not matter which output device is used. No output device in my system is defined to write to the global directory. Everything is set up to store files to the database.
My assumption is that the generation of a PDF format requires a temporary storage area to convert the data from the "Device Type" setting for the printer (such as Postscript or HPGL) to the PDF format and that the /usr/sap/<SID>SYS/global directory is used for this purpose.
Is there a parameter setting that allows me to modifiy this "conversion" location?

Assumptions:
---> You are running on Unix - I don't have instructions for Windows, but they would be analogous
---> Your System ID is TX1
---> 2Gb is big enough to hold your Adobe files
1.) Create a 2Gb file system named /AdobeFiles
2.) Create the required directories under this new file system
- For example: /AdobeFiles/300ADSP
3.) Verify that the user <sid>adm can write to the directory created in step 2
4.) Apply SAP note 1327372
5.) Rename the filesystems that SAP note 1327372 creates
- For example: mv /usr/sap/TX1/SYS/global/300ADSP   /usr/sap/TX1/SYS/global/300ADSP-ORG
6.) Create a symbolic link for the required directory to the directory created in step 2
- For example: ln   -s   /AdobeFiles/300ADSP /usr/sap/TX1/SYS/global/300ADSP
7.) Test your link
cd /usr/sap/TX1/SYS/global/300ADSP
touch TestFile
cd /AdobeFiles/300ADSP/TestFile
Your file should have been created in /AdobeFiles/300ADSP

File system /usr/sap/SID full

Hello All,
File system /usr/sap/SID getting full
I have rese trace from SAP level but still file system rapidly increasing...
below 2 files rapidly incrasing more space in file system
hostname:sidadm 136> du -sk dev_server1
31400   dev_server1
hostname:sidadm 136> pwd
/usr/sap/SID/DVEBMGS02/work
more dev_server1
[Thr 76096] * LOCATION    SAP-Gateway on host xxxx / sapgw02
[Thr 76096] * ERROR       registration of tp SLD_NUC from host xxxx not allowed
[Thr 76096] *
TIME        Sat Mar 27 13:05:32 2010
[Thr 76096] * RELEASE     700
[Thr 76096] * COMPONENT   SAP-Gateway
[Thr 76096] * VERSION     2
[Thr 76096] * RC          720
[Thr 76096] * MODULE      gwxxrd.c
[Thr 76096] * LINE        3766
[Thr 76096] * COUNTER     60935963
[Thr 76096] *
[Thr 76096] *****************************************************************************
[Thr 76096] *** ERROR => SAP_CMACCPTP3: wrong rqtype SAP_ACCPTP [r3cpic_mt.c 10240]
[Thr 75582]
Please help me to solve permently
Regards
Mohsin

Hi Gaurav,
I got the issue, problem was that the reginfo and secinfo on my ABAP system which was connected to my JAVA system, it was not allowing the requests to pass through and hence it was not getting registered. I deactivated the parameters of reginfo and secinfo and its now working fine.
I will look into the issue of where i went wrong with reginfo/secinfo

Portal can not work with abnormal increased /usr/sap/SID file space

hi experts,
I got a problem today on our HR portal.
At first I can't login the nwa, then I checked tha OS of portal, I saw that the file system /usr/sap/SID's used spaces increase very quickly, though I increase the free spaces for emergency use, the portal still can not work and the free space is still missing. I just solved by restart the SAP service.
Did anyone face the same problems before?
System information
OS --> AIX v5.3
Database --> Oracle 10.2.0.2
SAP --> netweaver 2004s SP12.

Hi,
This happens when your archive log file of the application increases,
Check the folder usr/sap/sid/instance/j2ee/cluster/server0/log/archive folder this is the reason for your disk space increase. Just take a backup and delete the files in the archive folder (except temp folder).
The deletion of older archive files is not handeled by SAP, you have to manually delete the archive logs.
Regards,
Vamshi.

/usr/sap/QAS/SYS/exe/run/startdb: Terminating with error code 12

Hi Experts,
We have made a system copy from Production to Quality and it has been done successfully. Now we are able to open the database manually. But when we are trying to start SAP it is not connecting the database base and it is giving error which is given below :
/home/qasadm/startdb.log
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 4764729344 bytes
Fixed Size                  2035312 bytes
Variable Size            2432700816 bytes
Database Buffers         2315255808 bytes
Redo Buffers               14737408 bytes
Database mounted.
Database opened.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
Mon Apr 12 10:45:40 IST 2010
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
    Notify Database Administrator.
/usr/sap/QAS/SYS/exe/run/startdb: Terminating with error code 12
^C
root@bsltest # tail -f /home/qasadm/startdb.log
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
Mon Apr 12 10:55:53 IST 2010
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
Mon Apr 12 10:56:22 IST 2010
starting database
SQL*Plus: Release 10.2.0.2.0 - Production on Mon Apr 12 10:56:22 2010
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 4764729344 bytes
Fixed Size                  2035312 bytes
Variable Size            2432700816 bytes
Database Buffers         2315255808 bytes
Redo Buffers               14737408 bytes
Database mounted.
Database opened.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
Mon Apr 12 10:56:42 IST 2010
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
    Notify Database Administrator.
/usr/sap/QAS/SYS/exe/run/startdb: Terminating with error code 12
Kindly see the logs and request you to kindly help us how it will resolve this issue.
Regards,
Jitendra

We have made a system copy from Production to Quality
After client copy sap schema had been changed thats why its not connecting.
fyi: Client copy and system copy both are different
schema had been changed thats why its not connecting
This is one of the post installation step after doing a system copy(reffer the ssytem copy guide)
Problem has resolved
Great, suggest you to close this thread
Regards,
Nick Loy

How do I resolve the "insufficient data for image" error for Adobe reader 11.0.04?

How do I resolve the "insufficient data for image" error for Adobe reader 11.0.04?

Hi Johnkel1524,
Please refer : http://helpx.adobe.com/acrobat/kb/insufficient-data-image.html
Also try updating to 11.0.5 and check.

"Error for command 'read sector'"...help please

I'm trying to install Solaris 10 on an x86 machine. During the initial install I get that for about 3 minutes, then it says exceeds maximum number of tries, and goes on with the install...why is this happening, the hd is a clean drive that used to have ubuntu working fine on it.
Error:
error for command 'read sector' error level: fatal

hi woms
bad news: its time to check warranty-status of your drive.
to be 100% sure, that the drive is defective, download the diagnostic sw from the manufacturers homepage.
@ rukbat
as the drive is recognized as a generic-ata, the chance for IDE should be >90%.
(sorry, couldn't resist ;-) :-) )
cheers, jenny
the sweater of a woman fits perfect,
when the men gasp for air. ;-)

Unable to access application /usr/sap/ SID /DVEBMGS42/exe/jlaunch

I have a SAP System which has AS-ABAP installed.
I am in the process of isntalling java add in . I am getting the following error .Pls help
Unable to access application /usr/sap/<SID>/DVEBMGS42/exe/jlaunch
I logged in as root user and also as <SID>adm , but did not work
Please help

if u r on a unix platform go to the directory /usr/sap/<SID>/DVEBMGS42/exe/ and see for the permisions using ls-l
if there are permisiions missing try giving them
u can use # chmod 777 *
but this will access to all files to every user in the system.
Edited by: jet l.....i on Feb 8, 2008 3:24 PM

File system /usr/sap/hostctrl/work getting full rapidly

Dears,
Recently We have installed PI 7.1 on AIX 6.1 and database is Oracle 10g.
Everything is working fine but we are facing one strange issue with it.
Our file system /usr/sap/hostctrl/work is getting full again and again,I checked that there is a file dev_saphostexec that is taking maximum space,At present its of 15 GB.
So please suggest how to solve this problem.
Shivam

Dear Mark,
I have read OSS Note SAP Note 1031096 - Installing Package SAPHOSTAGENT.
We are starting this week installing "Diagnostics Agent 711" on all SAP Netweaver 7.00 mananged system.
I have read the "Diagnostics Agent 7.11- Setup Guide".
In the "Installation Process", there is a step concerning the "Install the SAP Host Agent - Page 9".
I have read the "Installation_SAPHOSTAGENT.pdf" guide.
In the first page of this guide, it is written :
"You only need to download and install the host agent in the following cases :
- You want to centrally monitor a host that does not have an SAP component"
- You want to perform an upgrade to the SAP NetWeaver 7.1 for an SAP NetWeaver component".
In our productive envronment, we do have 2 clusters :
Cluster 01 is composed of 2 nodes.
Only "Databases" and "Central Services" of 5 SAP Systems are running.
There is no CI or SA
Cluster 02 is composed of 6 nodes.
Only CI and AS of 5 productive systems are running on theses 6 nodes.
My question :
Do we have to install a SAP HOST AGENT in nodes of cluster 01 ?
As written in "Downloading and Installating Package SAPHOSTAGENT" guide,
SAP HOST AGENT only need to be install on "host that does not have an SAP component".
Can we consider that "database" and "Central Service" are SAP Component or not ?
Thanks in advance for your feedback
Best regards
P. Cuennet

Managed System Config: Wily BC path /usr/sap/ SID /JC instance is not a directory for BI Java Instance

We are getting error message "Wily BC patch /usr/sap/<SID>/JC06 is not a directory while doing managed systems setup. System verification is successful. The Java directory should be /usr/sap/<SID>/J06 in our case, which is showing correctly in LMDB. Any idea?
I have done the usual resynch SLD, Rerun system verification and reset managed systems configuration etc.

Hi Tariq,
Please enter complete path like below and check :
/usr/sap/<ManagedSID>/<InstanceID>/ByteCodeAdapter
Also check below SAP note for details :
1943583 - Wily Agent Directory files are Missing after Network loss - Solution manager 7.1
Hope this helps.
Thanks & Regards,
Nisha

Error when Write/read Cluster in binary file.

hi all,
I implemented a code (using the Labview example) to save and read cluster data (see attached file). The write part works properly but when I want to read the file, there is an error : "Error 4 occurred at Read from Binary File in main_save_data_V2.vi; LabVIEW: End of file encountered'.
BUT the data are correctly open. Why is there such message? any suggestions?
thank you.
Cedric
Attachments:
main_save_data_V2.vi ‏19 KB

Instead of predicting how many clusters to read, just set the count in the binary read to -1. That will read all that it can and I got no error. Here is all you need in order to read the file.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Read clusters.png ‏12 KB

Terminal Error: Unable to read "/private/etc/cups/cups-files.conf" due to errors.

After finding out that my Kodak ESP C310 printer was no longer printing after installing OS X Yosemite, I tried entering these into the terminal to get the driver working again.
sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf'
sudo launchctl stop org.cups.cupsd
Nothing happened the first time I tried it, so I tried it again with still no luck. Now within seconds of opening the terminal I get this message :
" /private/etc/cups/cups-files.conf"
It pops up every few seconds, so it is practically impossible for me to type anything into the terminal without it popping up right in the middle. I tried the fix from the other discussion on this issue, and that didn't work. also I'm noticing that my printer isn't even added under "printers and scanners" anymore. I tried to re-add it, but I cannot without a driver that functions with 10.10.1
Any suggestions on how I should deal with this?

The permissions and ownership on /private/etc/cups/cups-files.conf should be:
/bin/ls -leO@ /private/etc/cups/cups-files.conf
-rw-r--r-- 1 root _lp compressed 3297 Mar 8 2014 /private/etc/cups/cups-files.conf
See "man cups-files" for the format of the cups-files.conf file
The contents of the /private/etc/cups/cups-files.conf file should look like:
# "$Id: cups-files.conf.in 11203 2013-07-26 21:32:33Z msweet $"
# Sample file/directory/user/group configuration file for the CUPS scheduler.
# See "man cups-files.conf" for a complete description of this file.
# List of events that are considered fatal errors for the scheduler...
#FatalErrors config
# Do we call fsync() after writing configuration or status files?
#SyncOnClose No
# Default user and group for filters/backends/helper programs; this cannot be
# any user or group that resolves to ID 0 for security reasons...
#User _lp
#Group _lp
# Administrator user group, used to match @SYSTEM in cupsd.conf policy rules...
SystemGroup admin
SystemGroupAuthKey system.print.admin
# User that is substituted for unauthenticated (remote) root accesses...
#RemoteRoot remroot
# Do we allow file: device URIs other than to /dev/null?
#FileDevice No
# Permissions for configuration and log files...
#ConfigFilePerm 0644
#LogFilePerm 0644
# Location of the file logging all access to the scheduler; may be the name
# "syslog". If not an absolute path, the value of ServerRoot is used as the
# root directory. Also see the "AccessLogLevel" directive in cupsd.conf.
AccessLog /private/var/log/cups/access_log
# Location of cache files used by the scheduler...
#CacheDir /private/var/spool/cups/cache
# Location of data files used by the scheduler...
#DataDir /usr/share/cups
# Location of the static web content served by the scheduler...
#DocumentRoot /usr/share/doc/cups
# Location of the file logging all messages produced by the scheduler and any
# helper programs; may be the name "syslog". If not an absolute path, the value
# of ServerRoot is used as the root directory. Also see the "LogLevel"
# directive in cupsd.conf.
ErrorLog /private/var/log/cups/error_log
# Location of fonts used by older print filters...
#FontPath /usr/share/cups/fonts
# Location of LPD configuration
#LPDConfigFile launchd:///System/Library/LaunchDaemons/org.cups.cups-lpd.plist
# Location of the file logging all pages printed by the scheduler and any
# helper programs; may be the name "syslog". If not an absolute path, the value
# of ServerRoot is used as the root directory. Also see the "PageLogFormat"
# directive in cupsd.conf.
PageLog /private/var/log/cups/page_log
# Location of the file listing all of the local printers...
#Printcap /Library/Preferences/org.cups.printers.plist
# Format of the Printcap file...
#PrintcapFormat bsd
#PrintcapFormat plist
#PrintcapFormat solaris
# Location of all spool files...
#RequestRoot /private/var/spool/cups
# Location of helper programs...
#ServerBin /usr/libexec/cups
# SSL/TLS certificate for the scheduler...
#ServerCertificate /Library/Keychains/System.keychain
# SSL/TLS private key for the scheduler...
#ServerKey
# Location of other configuration files...
#ServerRoot /private/etc/cups
# Location of Samba configuration file...
#SMBConfigFile
# Location of scheduler state files...
#StateDir /private/etc/cups
# Location of scheduler/helper temporary files. This directory is emptied on
# scheduler startup and cannot be one of the standard (public) temporary
# directory locations for security reasons...
#TempDir /private/var/spool/cups/tmp
# End of "$Id: cups-files.conf.in 11203 2013-07-26 21:32:33Z msweet $".

Proxy error with subversion read access test

Hi,
I specified the following repository URL: [http://l0762.domain.local/svn/io_se/trunk] and added username/password for this subversion server.
I get the following error stack when doing 'Test Read Access':
Testing read access for repository [http://l0762.domain.local/svn/io_se/trunk..].
svn: PROPFIND of '/svn/io_se/trunk': 502 Proxy Error ( The ISA Server denied the specified Uniform Resource Locator (URL). ) ([http://l0762.domain.local|http://l0762.domain.local/])
svn: PROPFIND of '/svn/io_se/trunk': 502 Proxy Error ( The ISA Server denied the specified Uniform Resource Locator (URL). ) ([http://l0762.domain.local|http://l0762.domain.local/])
Access refused.
In the generic preferences settings for Web Browser and Proxy, I have specified the proxy server, port number and even username/password for this proxy. The "Test Proxy" works fine. The exception list contains the l0762.domain.local. I also tested with *.domain.local.
Any ideas?
Thanks,
Marcel
Edited by: mmeijn on Nov 20, 2008 2:48 PM

The problem is resolved by removing the proxy preference.

In sequence for write/read, value of wait time?

I made a sequence for write then read on a serial port.
Sometimes, the read string is not the entire one.
I put some wait time of 500ms in write sequence and wait time of 500ms in read sequence. Could it be the problem ?Is it possible to change the buffer size ?

Hi,
The buffer size is limited by the port itself. Consequently there really is no way to increase its size. Are you using VISA or the old serial VI's? One thing you may want to try is making your read time half the time of the write sequence. Also make sure that flow cotrol is working. With flow ctrl, you should never lose any information.
Hope this helps out.
Best Regards,
Aaron K.
Application Engineer
National Instruments

Where does the details of the files on usr/sap directories get saved?

hi,
when a (.dat) file is created by background job processing in the 'usr/sap/' directories, where does the details like last changed, last modified of these files get saved?
which table does these detiails get saved?
thanks,
swamy

Hi,
Transaction AL11 does exactly wat you are looking for,
it lost list of files present on the server SORTED on date and time.
and also u can use function module EPS2_GET_DIRECTORY_LISTING which contains a date/time stamp
Hope it helps u...

Error 2 for write/read access to a file. File = /usr/sap/SID/SYS/global/999

Similar Messages

Maybe you are looking for