Error (-200) // unable to open iTunes

I have encountered an error trying to open itunes and I cannot find any support on the apple site. The error is (-200) and it prevents me from openning the application altogether.
I have tried updating the software, deleting the application and re-installing, deleting the prefs, running disk utility (repairing permissions) – all to no avail.
Help anyone...?
eMac G4 1ghz   Mac OS X (10.2.x)  

Try here error 200  >  iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime

Similar Messages

  • ITunes error -200 unable to open

    Hi.
    Since today, I have throubles using Itunes (latest version) :
    When I try to open it, it says :
    I checked a few forums in vain... I tried to reinstall it... in vain...
    For information, the concerned machine is a macbookpro13" 10.7.1
    Please help !!!

    Try here error 200  >  iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime

  • Quick Time error and unable to open ITunes

    I updated my ITunes and now cannot open it. Message is Quick Time version 7.02 is installed. Itunes requires vs 7.0.3 or later. Reinstall Itunes. I did several times and still get this message.
    thanks.

    Hey Peggy,
    This is a post that I offered yesterday. The steps that I listed in the following post worked for me as I was able to access iTunes6 with QuickTime7. More importantly, my entire library was intact. Good luck! Here goes ...
    Hey troubled Podheads,
    I was one of the legion with problems in downloading iTunes6 and QT7 for Windows until I tried something (I must say that I am not a pc wizard and I don't know the technical reasons for why the following worked, it just did! So if there are any pc geeks out there, be sure to chime in). Anyway, this is what I did. First uninstall QuickTime if you do have it on your pc. If not, just go to the next step:
    Go to START, then RUN. Type in regedit and then click OK. Your REGISTRY EDITOR should open. You should see HKEYLOCALMACHINE in the scroll down menu on the left, with a small box to its left. Make sure that the inside of the box has a negative sign - this will open up the next set of subfolders. Next, make sure that the subfolder, SOFTWARE, has a negative sign in the small box to its left. Next, make sure that there is a negative sign in the box next to the subfolder entitled, Apple Computer, Inc. You'll see at least three subfolders: iPod, iTunes and QuickTime. Click once on the QuickTime folder until it is highlighted and then delete it. You will be asked if you want to delete QuickTime and its subfolders. Click ok and then close out the Registry Editor.
    Next, download the stand alone QuickTime 7 at this link (you may have to cut and paste this link to open this website):
    http://www.apple.com/quicktime/download/standalone.html
    When you download the stand alone QT7, you may get a couple of error messages (I did), but if you repeatedly click ok (like I did), the QT7 player should load with no problems.
    Again, I am no pc geek, but this worked for me and I have gained access to iTunes6 (with video capacity) and my complete library is intact. Nothing like trial and error!! Good luck -- I hope this works for all of you frustrated Podheads out there!

  • TS3212 Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any hel

    Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any help??
    Please!
    Thanks!

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • Runtime error - R6034 (Help unable to open Itunes)

    Hi All,
    After upgrade of Itunes I get the following error when trying to open Itunes
    Runtime error
    R6034
    An application has made an attempt to load the c runtime incorrectly
    Any ideas on what to do?
    Best regards,
    Mette

    Hi MettefromDXB,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
    Symptoms may include:
    "The program can't start because MSVCR80.dll is missing from your computer"
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    "Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    I hope this information helps ....
    Have a great day!
    - Judy

  • HT6001 After updated to iTunes 11.1.4 for windows vista , I was unable to open iTunes and it keep error message. My iphone unable to USB hotspot the internet to computer. Pls Help

    After updated to iTunes 11.1.4 for windows vista , I was unable to open iTunes and it keep error message. My iphone unable to USB hotspot the internet to computer. Pls Help

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • HT203175 "apple mobile device failed to start"  "verify that you have sufficient privileges to start system services" came up on windows XP upgrade to 11.1.4 and since have been unable to open itunes - uninstalled and tried reinstall to no avail - what to

    "apple mobile device failed to start"  "verify that you have sufficient privileges to start system services" came up on windows XP upgrade to 11.1.4 and since have been unable to open itunes - uninstalled and tried reinstall to no avail - what to do ? Ken

    I am having this same problem. I took Kappy advice on restarting the Apple Mobile Device Service, however that did not work. I got this message in a pop up window that came up immediately.
    Windows could not start the Apple Mobil Device Service on local computer.
    Error 1053  The service did not respond to the start or control request in a timely fashion.
    I have already uninstalled itunes, all the related programs and I cannot reinstall, this Apple Mobil Device message stops the install.
    Can anyone please help?

  • Unable to open itunes after update

    unable to open itunes after update

    I had a user with the same issue after updates and I was able to resolve. 
    I copied QTMovieWin.dll from:  C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    to: C:\Program Files (x86)\iTunes
    I did so after uninstalling and re-installin, but I don't beleive that was necesssary.  Thanks to user thurdy.  This fix was from apple support for the error "iTunes stopped working".  Figured I'd give a shot and it ended up working.
    For reference the user was receiving the following errors exactly:
    "the procedure entry point ?fastfree@***@@YAXPAX@Z could not be located in the dynamic link library JavaScriptCore.dll"
    and
    "iTunes was not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error127)"

  • Unable to open iTunes...missing MediaToolbox.dll

    Unable to open iTunes. Get the missing MediaToolbox.dll error message. Have reinstalled iTunes and Quicktime. Nothing worked. Any ideas?

    Hey... I had the same problem! In one of the other forums, they suggested uninstalling Quicktime player and reinstalling it. The downloading from here
    www.apple.com/support/downlods/quicktime72forwindows.html
    and then launch iTunes... it worked for me just a few mins ago!
    Good luck!

  • I run windows 7.  Since updating itunes, I have been unable to open itunes.  I have uninstalled and reinstalled, and have chosen to run a administrator.  Itunes icon now displays a shield with yellow

    I run windows 7.  Have been unable to open itunes since updating last week.  I have uninstalled itunes and reinstalled, and have checked run as administrator, but still can no open.  I notice that there is now a shield with yellow and blue squares next to it, that i do not think were there before.

    many thanks, Mary.
    The ModName is ituneup.dll; the modver is 1.0.7.0.
    Do you have the TuneUp plugin installed for your iTunes? If so, I think your copy is causing the issue here. Try the following document:
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    ... does that help with the launch errors?

  • I upgraded my iPhone 5 to iOS7 and I am unable to open iTunes on my phone - the screen just never loads.

    I installed iOS7 on my iPhone5 and now I am unable to open iTunes - the screen just stays blank.
    I have checked date and time and wifi settings.
    Not sure what else to do.
    I do have iMatch active on my device and its working fine on my other iPohne with iOS7 installed.
    Any help please!

    Have you tried logging out of your account on your phone by tapping on your id in Settings > iTunes & App Store and then logging back in ? If it's still the same after that then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

  • N79 (Error message :Unable to open .File type not ...

    Dear nokia service manager,,
    Iam sivakumar using the nokia N79 handset.Iam getting the message like this (Error message :Unable to open .File type not supported)when i was trying to open the video file shooted by some other camera.I have tried changing the format of the file..but no use ..i dont get ant suitable software converter in the internet.So kindly look into this matter as i need this very uregently...
    hope its a mandatory feature as laptop and mobile interface are simple task nowadays in mobile...
    pls reply me..its very urgent...thanku..

    You could try Videora (http://www.videora.com/) - the downside here is that they have specific versions for specific phones, and sometimes it will makea file that plays perfectly in the desired phone but can't be shared to other models. The don't show a version for the N79, but try the N96 one because the N96 is the most similar OS to yours that they offer.

  • ERROR Message "UNABLE TO OPEN" and "E_IO_Cannot_Open"

    Trying to download 6 ebooks from Hive and I can download the acsm file but when I click that I get an error message "Unable To Open" and "E_IO_Cannot Open." The computer is authorised and uses Win 7 with ADE 3.  I tried ADE 4 but no better.  I have an older PC using Vista and ADE 2 and that will download okay but it is constantly being used so it is not convenient.  Does anybody know what's wrong?  Thanks.

    Hello,
    To try to help you, please, could you give some more informations ?
    - the operating system (XP/Vista), the edition ( Pro/Home...) and the service pack
    - usually, the installer installs the both files in C:\Program Files\Microsoft Sql Server\Samples. Is there any change in the location or have you moved the both files ?
    - could you check with the files explorer , that the 2 files are read-write and not read only( find one file, right-click on it, properties and in the 1st tabpage, you should see a checkbox read-only ( if checked , unchecke it ) ?
    - have you Sql Server Management Studio Express Edition ( at least SP1 ) ?
    If no, download it and use it to attach
    in the object explorer,
    click on your instance to expand it
    right click on databases
    in the contextual menu, click on attach
    in the new form,click on add
    you arrive on a second form : find your file , click on it, and OK
    it's the simplest way to attach ( the sp_-attach_db is complicated to type )
    the error messages are sometimes more clear in SSMSEE than in Sqlcmd
    Try also to attach ( thru SSMSEE or Sqlcmd but in using the windows authentification )
    NB: i hope that you are not trying to attach AdventureWorks on a remote instance and on a remote computer ( it would explain access denied )
    We are waiting for your feedback to try to help you more efficiently
    Have a nice day

  • HT4623 Unable to update applications installed.Error message "unable to connet iTunes" appears after installation icon hanging

    Since last two weeks I am unable to update my applications installed in iPad with iOS 6. Also no new app is getting installed. Installation icon appears but after some time error message "unable to connect iTunes " appears.Can some one guide me to solve this problem please?

    I've had similar problems. Whenever I try and update apps on the iPhone, the app would apparently download ok, but then not install. This didn't happen with new apps - only ones I was updating.
    I got around the issue by downloading the update in iTunes on my Mac, then deleting the app from the phone, then syncing. The problem with this method is that certain apps had saved settings which are lost when following this method.
    However... I seem to have fixed the issue after 2 months of trying.
    I followed the advice of this page:
    http://www.iphoneatlas.com/2008/09/10/itunes-8-workaround-for-5002-unknown-error -when-trying-to-update-apps/
    Then I repaired disk permissions and finally I completely erased and restored my iPhone BEFORE I synced it after the moving of the Mobile Applications folder.
    It's all working perfectly now and made my life much easier (especially with Aurora Feint updates), so I hope that this method works for some others.
    Good luck.
    Dom

  • One more solution for Silent Monitoring Windows 7 64-Bit - ERROR VOIP2037 Unable to open the NIC adapter for sniffing.

    Hi,
    we are using UCCX 8.5 SU3.
    After replacing the actual agent workstations with Windows 7 64-bit we had to face problems with the silent monitoring. (no sound at all and in the CSD the usual error popup "Silent Monitor-Session failed...").
    In the CAD logfile I found the errorcode. "ERROR VOIP2037 Unable to open the NIC adapter for sniffing. Please reconfigure the installation."
    After investigating the logfiles, starting postinstall.exe a hundred times and reading the Configuring and Troubleshooting VoIP Monitoring Guide.
    I just learnt about the wonderful tool nicq.exe.
    And so i found out that the driver spcd.sys wasn't installed.
    Check in the registry for "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SPCD"
    It seems to me that the "Cisco Supervisor Desktop.msi" never installs the driver one a Windows 7 64-bit.
    After starting the NICQ.EXE as administrator the driver is being installed.
    Test 1: Check Driver Status
    Driver not installed. Attempting to install it...
    Driver has now been successfully installed.
    SPCD Driver service is not running. Attempting to start it...
    SPCD Driver service is now running.
    Test 1: SUCCESS
    And after that the silent monitoring works again like a charm.
    Maybe that info help someone.
    kind regards, sebastian

    Excellent information, this has been driving me crazy for a while now.  Once i saw this info I was able to get it resolved rather quickly.
    +5 for you, (I tried to click it above but it would not let me.)

Maybe you are looking for

  • Just purchased a brand new mac and want to backup operating system to flash drive

    Hey everyone, I just took the plunge and got my first mac! I am wanting to backup the operating system onto a flash drive before I really get into using the computer in case anything happens (I tend to have bad luck) anyone know how to do this on a n

  • Error while running jBoss server from console

    I am facing a problem regarding running of Jboss server,When i am giving the run.bat command from my console a lot of lines of code is being displayed rapidly and the cursor is coming to a halt after giving the following message"[Error,Default] at ja

  • RegisterDatabaseChangeNotifications(Properties) error

    Hi, I have an unusual problem. When i try to register may DatabaseChangeNotification i get ORA-29972 error(user does not have privilege to change/ create registration) here is the code:           Properties prop = new Properties();           prop.set

  • Widgets won't sit on desktop...

    When first opening Dashboard I was able to mount widgets on the desktop. Now they "fly off" when I activate the desktop. What have I done???

  • PSE 12 does not start on iMac with Mavericks

    I just bought PSE 12 and installed it on my new (1 week old) iMac (late 2013, 21,5", 2,9 GHz, FusionDrive) with Mavericks. Installation worked fine and finished complete. When I double-click the PSE12 icon, it show up in the dock for 2 seconds and th