Error -200609 occurred at DAQmx Write: Selected Buffer Size Too Small

Question

Hello, I'm writing some simple test VI's that I will eventually build upon to make an externally clocked analog output VI. I started with a very simple program to output finite samples using the onboard clock with the DAQmx Timing.VI. When I run the program, I almost immediately get an error. The error message is below.
Error -200609 occurred at DAQmx Write (Analog DBL 1Chan 1Samp).vi:1
Possible reason(s):
Generation cannot be started, because the selected buffer size is too small.
Increase the buffer size.
Conflicting Property
Property: Output.BufSize
Corresponding Value: 1
Minimum Supported Value: 2
Task Name: _unnamedTask<1C>
I have used DAQmx VI's before in similar applications and never encountered this error. Additionally, I read at the link below that DAQmx Timing.VI should be generating the buffer automatically. Any ideas as what could be causing this?
Specs:
Windows 7
Labview 2012
PCIe-6353 as DAQ board
Below is a picture of my block diagram and the VI is attached.
Solved!
Go to Solution.
Attachments:
FiniteSamplesTest.vi ‏18 KB

Answer 1

Oops. Just realized my very silly mistake: I forgot to add the Start Task VI. I did so and it works as designed.