Error 29 using final cut pro X ?

How to burn a DVD in Final Cut Pro X ? I keep getting error code -29 .

This has been reported here a few times.
The solution in this thread may (or may not) apply to your project.
Russ

Similar Messages

Comparing video quality of AVCHD BluRay discs using Final Cut Pro Share vs Compressor

Up front, I will admit to being a newbie when it comes to using Final Cut Studio 3 and would appreciate some feedback from the Apple forum experts.
I have spent a lot of time trying to determine how to achieve an optimum group of Compressor 3.5.2 settings so that the playback video quality of an AVCHD BluRay disc is equal to or better than one created by using the simpler auto settings of FCPro Share, version 7.0.2.
When using Compressor’s auto/default maximum settings, I experienced the same error message reported in:
Error MessageDuring Creation of Blu-ray Disc in FCP and Compressor 3.5
https://discussions.apple.com/message/12073794#12073794
I have since made some Compressor AVCHD Discs with smaller bit rate settings and compared video quality with a single FCP Share AVCHD disc. Both seem to be equal in providing a very good video when viewed on my new Panasonic DMP BDT 310 BluRay player. However, the Compressor AVCHD discs show some motion artifacts not present with the FCPro Share version, especially when scrolling text or when objects are moving through the field of view, and visible artifacts are seen from a stationary chain link fence and other lattice work in the background of the video sample.
My sample video used for the comparisons between Compressor and FCP Share discs is a 21 minute duration home movie, originally captured from a mini DV, Canon HV30 1080i camcorder using ProRes HQ encoding(1440x1080), and dragged into FC Pro 7.0.2 timeline where 10 chapter markers have been inserted.
To create an AVCHD disc using FCPro Share, Markers are used to set the IN and OUT points, Select IN to OUT from the timeline, pull down File Menu Share, Select Create BluRay from options in pop out Share pane, and designate output device along with picture files for Background, Logo, and Title options. When these are completed, click on Export. My 21-minute video required almost two hours for encoding including about 10 minutes for burning. This accomplished on an iMac 3.06 GHz Intel Core 2 Duo.
To prepare this same 21-minute video for use with Compressor, I again Select IN to Out from the FCPro timeline, but this time use File Export as a QuickTime Self Contained movie including Chapter markers. Then Open Compressor, choose Create BluRay from Template pane, right click on the down arrow in the Batch window and load the QT self contained movie file. From there I went to the Inspector window and tried various combinations of bit rate settings along with Frame Encoder options such as Better or Best motion parameter controls.
I have tried the following combinations of Bit rate settings along with varying Frame Encoder controls and burned an AVCHD disc for each example:
Example A
Compressor set to 6 Mbps Average and 8Mbps Maximum, Frame Encoder settings OFF. Approximately 4 hours to encode although the time remaining estimator indicated a larger value of ~7 hours; not an accurate estimator at all.
Example B
Compressor set to 6 Mbps Average and 8Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motionadaptive)” settings. Approximately 4 hours to encode, not the 13 hours that were estimated.
Conclusion: Comparing A & B Compressor versions, Disc B showed some improvements in reducing motion artifacts over Disc A.
Example C
Compressor set to 13 Mbps Average and 15 Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motion adaptive)” settings. Multipass checked. DeInterlace was checked. Unknown hours to encode; about 8 hours done overnight..
Conclusion: Disc C showed some minor improvements reducing motion artifacts over Disc B
Example D
Compressor Auto settings,i.e., 15 Mbps Average and 17 Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motion adaptive)” settings. Multipass checked. Approximately 12 hours to encode, done overnight. Inserted disc next morning after the overnight encoding was completed, and a few minutes later an error message pane appeared that the maximum bit rate had been exceeded. This message was consistent with the Apple posted thread referenced above. Unfortunately the long overnight encoding was wasted.
It seemed to me that the best Compressor settings for suppressing the motion artifacts were displayed by the disc burned in Example C, i.e., 13/15 Ave/Max Mbps with“Better” Motion settings in the Frame Encoder.
However, when this disc was compared to the AVCHD Disc burned using the FCPro Share, the latter still seemed much better. I do not know what the auto bit rate values are as set in FC Pro, but for me, the quality is quite good AND the motion artifacts are significantly reduced, especially evident with the scrolling text.
Sorry about this long post, but I thought the detail would be necessary for the experts, and maybe helpful to others trying to get started in this BluRay arena. Did I misuse Compressor? I think the sample video exported as a self contained QT movie was the right thing to do? Not sure where I went wrong.
Thanks in advance for Feedback and Recommendations. For now, I’m going to stay with the simpler process using Final Cut Pro Share function.
BoBo

Thank You, Brad, for responding; glad to hear I'm not the only one having similar Compressor issues.
You may have hit on something. Perhaps Compressor's use of H.264 encoding was the reason for my motion artifacts? And perhaps Final Cut Pro Share retains the 1440x1080 quality as it burns the AVCHD BluRay disc?
I had Toast 10 for less than 30 days a couple of years ago, and was lucky to get a refund.
What version of Toast do you have? Wondering if new Toast 11 has improved previous bugs, especially upgrading its Chapter text, pictures, music. I would go back to Toast if it came close to mirroring DVD Studio Pro, or even iDVD capabilities.
Thanks,
BoBo

How to use Final Cut Pro with multiple user accounts?

Hi,
I want to use Final Cut Pro on a clean user account. How do I set it up? How can I access my old FCP library and still work on it from multiple users?
Also, I want my DropBox account to back-up my media. Any tips?

I use external drives as backup. But I don't trust them. And in case of fire or what ever...It is of no use...
But I agree on your comment about DropBox. It would have been the perfect solution though.
What else is there?
I have a 2TB HD but these projects are huge and still growing - so I have to move my projects to several external drives. So maybe I should just work directly from external drives and skip the partition of the computers main drive? I am thinking of the disadvantage of reducing the total storage of the disk.

I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Pro

I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Project that is HD, and tried reconnect media with original HD movies (video), the sequence project got distorted for all the text, shapes used and all.. everything changed its orientation and scale.. Is there a way by which I can preserve my work done on DV PAL and switch it preserving its proportions, scale and orientation, but on a HD project sequence?? Appreciate your help and advice..

Yes. A couple of ways that might work.
First Way
What you need to do is load one of your hd clips in the viewer and edit into a new HD sequence. Does it display correctionly?
OK, select the clip in the hd timeline and copy (command-c). Now go to the HD sequence with the material that's distorted. Select all (command-a) and paste attributes (option-v) and choose basic motion and distort. That should maek things work. What won't work is anything that you've adjusted as far as basic motion or distort in your PAL sequence. That I'm pretty sure you'll have to redo.
Second Way.
Choose your original PAL sequence and do a Media Manage changing the sequence preset to the appropriate HD paramenters with the media offline. You then should be able to reconnect these clips with your original HD media.

I have been using Final Cut pro v6 without any problems but recently had to reinstall. Since then I can't open and view all my Quicktime clips. They appear white in timeline which means you can hear audio but not view picture. Any tips?

I have been using Final Cut Pro without any problems - v6 - for ages. I recently had a hardware issue and had to reinstall the software. Since then I can't open most of my QT clips in my fcp project. They appear as white clips - audio only no pictures. There are a few QT clips you can view as regular thumbnail images and they play ok. What's the issue? I have fcp v6.0.6 and QT v7. Any thoughts on what to do next?

Yes I did software updates which updated fcp to 6.0.6 and QT to version 7.7. That's as far as updates have taken me although i have requested daily updates. I forgot to say the clips don't play in QT view either. Again sound but no pictures when they are played.

How to use Final Cut Pro

How do you use Final Cut Pro which I might start using on my Mac Mini

Step 1: Read through the manual/help files. Pay particular attention to system requirements and set up.
Step 2: Install the application.
Step 3: Do some tutorials.
Step 4: Refer to the manual/help files when you run into questions while working on the tutorials.
Step 5: Capture or import footage into your first real project.
Step 6: Use what you learned from the manual/help files and tutorials to edit your video.
-DH

How to use Final Cut pro with external hard drive?

I have too little space on my computer so I have to use final cut pro x with an external hard drive, but whenever I have the hard drive plugged in and Final cut going, my computer goes very slow. I just upgraded to 16gb ram... but can't seem to run FCP x while an external hard drive is plugged in. FCP just freezes up and I have to force quit.

craigbuckley wrote:
all the files and events in final cut are still on my internal, so my internal drive is still full.... Do I have to go and delete everything off my internal?
In addition to the excellent advice to keep your media on an external HDD, you need to make sure that your system (boot) drive has a decent amount of free space if you want to have a satisfactory editing experience. Many people recommend not going below 20% free space. That's especially so for the boot drive, but as you fill up the external, its performance will also slow. Ideally, we would have separate media and backup drives,
You don't need to "delete everything". Rather, you first figure out what needs to be moved. You copy those files to the other drive and then verify that all the files you copied are in two locations. At that point you can delete those files from your boot drive.
Good luck.
Russ

I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help

I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help

It would depend on how old your IMac is, how mush memory you have, it it can be upgraded by OWC, etc. I have a 2006 Macbook Pro and would NOT put Mavericks on it or espeacially FCP 10.1.1 on it because the most memory it can have is 4 GB. You need at least 8 GB to work with Final Cut Pro 10.1.1. IMHO.
I would try to find a copy of Final Cut Express perhaps.
Does this answer your question?

I'm thinking of using Final Cut Pro to straighten slightly crooked footage and then re-import back to iMovie to complete the video. Does this have any impact on image quality?

I'm thinking of using Final Cut Pro to straighten slightly crooked footage and then re-import back to iMovie to complete the video. Does this have any impact on image quality?

As your rotate the image, you will begin to see black edges. So, as Tom implies, the image must be scaled up to hide those voids. If you shot 4k ad are editing in a HD timeline, no problem, lots of room to spare. If you shot 1080 and are editing in a 1080 timeline, you will run into issues at a certain point. However, if your 1080 project is going to be transcoded to 720 or ye olde DVD you won't notice any deterioration at all.

Has anyone burned 1080p blu-ray discs using Final Cut Pro alone?

I am in the market for a new computer. Currently I am a PC user who has burned Blu-Ray discs using Pinnacle. I am dissatisfied with that software because it hangs and crashes at critical moments in the rendering and burn process. I am considering switching to Mac but will only do so if I can burn true Blu-Ray movies which are playable in an ordinary Blu-Ray player.
I have read some of the discussions on this board and it is not clear to me whether it is yet possible to burn 1080p Blu-Ray discs playable on any Blu-Ray player using Final Cut Pro alone. Can someone confirm for me whether they have done this? Some users have indicated they can only output 720p using Final Cut Pro (which is not very satisfying). Others have indicated it is necessary to use Adobe Encore. If you have to use Adobe Encore to burn, why use Final Cut Pro at all? Why not use Adobe Premier Pro for editing and Encore for burning?

David S. wrote:
And yes you can author single track 1080p blu ray discs with Compressor 3.5.
But that's not what the OP asked, "using FCP alone."
Why not use Adobe Premier Pro for editing and Encore for burning?
Well, why not just put CS4 on your PC, especially considering you already have the BD hardware?
There is no truth to the rumor that applications running on Macintosh are any more stable than the same apps a PC; all systems crash.
bogiesan

How do you mark a section from the timeline to send to Compressor 4 using Final Cut Pro X?

I am trying to send just a certain piece from the Timeline to Compressor 4 using Final Cut Pro X and I can't figure it out. Please help!

jakelovesanna wrote:
The video itself is intirely 5 minutes, but the timeline goes to 24 hrs.
24 hours?
If you select the timeline and press Shift+Z do you see a lot of black space in the timeline? If so, you may have a huge gap clip (although I fail to understand how you achieved it). Click on it and if it can be selected, delete it with the Backspace Key (next to the = key).
Then press Shift+Z again.
If I've got this wrong, can you post a screen grab of your timeline?
Andy

HT5148 i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear. how do i get my video to play clear.

i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear again. how do i get my video to play clear and not fuzzy?

Same reply.

Having problem with spinning ball using final cut pro x with new macbook pro with retina screen

Having problem with spinning ball using final cut pro x with new macbook pro with retina screen

Update the software. There is no reason to run a two year old version.
Russ

HT4664 Can I use final cut pro X on " Mac mini" ?

Can I use final cut pro X on " Mac mini" ?

depending on what model: for sure yes, it does!
I did use FCPX on an old MacMini, c2d, 2.26GHz with 8GB Ram (using proxies made editing easy).
My actual work-horse is a MacMini i5, late 2012, 16GB Ram, plus some ext. usb3 drives = perfect for my needs! (costs vs. power)
I'm using two cheap 2.5" Toshiba 1TB usb3-drives, combined with MacOS' built-in DiskUtility as a Raid0 = 150mbps for under 100€ ... not professional (=raid0 contains a small risk of data loss), but again: best €-vs.-HP ratio

I am making a graduation video for my cousin using Final Cut Pro. I have photos layered over videos, and I was wanted to find out how you can add a border around the photos so they stand off of the video. Anyone know what I could do?

I am making a graduation video for my cousin using Final Cut Pro. I have photos layered over videos, and I was wanted to find out how you can add a border around the photos so they stand off of the video. Anyone know what I could do?

You would need an image editor to edit the images and add a border to the image first before importing them into Final Cut.
Cheapest and very good image editor?
PIxelmator.
Located in the Mac App Store. $14.99 USD.
Here is the Pixelmator website to give you an overview of the app.
http://www.pixelmator.com/
Good Luck!

Error 29 using final cut pro X ?

Similar Messages

Maybe you are looking for