Error 32812 (Specified Tag Name not Defined) from FP Read

I built an application using LabVIEW 7.1 and FieldPoint 4.1. It
performed well until about a week ago. Suddenly, I started getting
error 32812 (Specified Tag Name Not Defined) when doing an FP Read to
read all the channels on an FP-RLY-420. This is installed at a
client's site, but my client assures me that nothing changed in the
computer configuration. There is a dual serial card installed (SIIG
Cyberserial DualPCI dual 16550
RS232 Serial I/O Card), which does seem to cause problems (mouse jumps
erratically), and I wonder if this card could be contributing to the
problem, but I'm not sure why I would get the specific error message
I'm getting.
In looking for info on the problem, I did find an article on
registering the MIS files, but I have tried selecting "Find Devices"
through MAX while logged on as an admin, and the error still occurs.
If anyone has any ideas as to what could be causing the problem, it would be greatly appreciated.
Thank you,
Jason

Hello Jason,
I think that the error you are seeing could be caused by either 1) a
mismatch between the tag names saved on your computer and the actual
channel names on the module, or 2) a problem with how the serial port
is communicating with the module (only applies if you are using a
serial communication module, as opposed to an Ethernet module).
For the first issue, you have already tried to reconcile any
differences in tag names by reregistering the MIS files. Since
that didn't work, I would recommend trying to recreate your entire
FieldPoint system in Measurement & Automation Explorer (MAX),
including the IAK file. I know it is kind of extreme, but I would
recommend just deleting your FieldPoint configuration in MAX, deleting
the IAK file, and resetting the address and recreating your
configuration.
I think that troubleshooting a serial communication problem could be a
little more difficult. I would recommend browsing through the
following documents for some possible troubleshooting ideas.
FieldPoint Serial Network Module Common Problems
Let us know if this solves the problem or if you have any further question.
Regards,
Travis Gorkin
Applications Engineering
National Instruments
www.ni.com/support

Similar Messages

Error 32812: specified tag name not found

Hello,
I've just started using LabView 7.1 (under Windows) with a Compact Fieldpoint and developed a small data acq. test program. I've built an install and installed the program on another PC. I've also installed MAX onto the target PC and loaded up the Fieldpoint iak file into MAX. Everything worked fine the first time I did this and my program communicated with the Fieldpoint. Now, I've just installed a new version of my program and I'm getting an error 32812 specified tag name not found when I use the FP Read.vi.
Any ideas what is wrong? I presume that my iak file has the wrong tags in it? But it's the same one saved from my development PC! I did notice a slight difference in the versions of MAX, my development PC has
3.1.1.3003 and the target PC has 3.1.0.3021. If this is the problem where do I find an updated install for MAX
Many thanks
Mike

Hello Mike-g
This is a common error. Checkout the following Knowledge base for more information on how to deal with it:
http://digital.ni.com/public.nsf/websearch/02EB73D02715981A8625682B00774F8F?OpenDocument.
Hope it helps...

Error:"The specified tag name was not found"

Hello:
My problem is the FieldPoint error message in LabWindows/CVI v6.0.
When hook up with Ethernet module(FP-1600), NO Problem on the source code, specially item Name "All". See the actual code.
if(status = FP_CreateTagIOPoint (ServerHandle, resourceName, deviceName, "All",&IOPointHandle))
But When hook up with RS-232C Module(FP-1000), occured error. The error code is 32812, that means "The Specified tag name was not found."
What makes this error? Why item name "All" makes the error when using FP-1000?
Please help me.
Thank You.

Make sure the resourceName and deviceName match what is in FieldPoint Explorer. See the following KB:
http://digital.ni.com/public.nsf/websearch/02EB73D02715981A8625682B00774F8F?OpenDocument
Also, I have seen this error when targetting serial modules with FieldPoint Explorer open. Make sure FP Explorer is closed.

Swf-version can be specified when using SDK 3.6? [ Error #1065: Variable JSON is not defined ]

I've been using playerglobal.swc of flash player 11 and SDK 3.6.
ReferenceError: Error #1065: Variable JSON is not defined
can be solved by setting -swf-version to 13. (http://forums.adobe.com/message/3933620#3933620)
However, swf-version is not available in SDK 3.6.
Can native JSON be used?
Otherwise, can com.adobe.serialization.json.JSON be used without name conflict?
JSON (from ...\flex_sdk_3.6\frameworks\libs\player\11\playerglobal.swc(JSON))
com.adobe.serialization.json:JSON (from ...\as3corelib.swc(com/adobe/serialization/json/JSON))

anyone know the answer to this?
how are we supposed to use the new player features with using the 3.x SDK?

[CS4] ReferenceError: Error #1065: Variable {ClassName} is not defined

A few days ago I decided to give Matrix3D a try, so I changed my publish setting to target flash player 10, and just to be safe, I hit the test movie magic combo (ctrl-enter) and got the dreaded Error #1065 all over the screen, so, ok, I thought I'll pass on Matrix3D for now, flipped the publish setting back to flash player 9 and I was a happy camper again.
Just now, publishing for flash player 9 fails with the same result. This happens _right after_ a successful build, I moved a few movie clips around on the stage, re-test, and got myself an Error #1065 wall of text in the output window.
Funny fact: this only happens with "test movie" (ctrl-enter). If I "debug" (ctrl-shift-enter) the movie, it compiles and runs just fine with no problem whatsoever.
All the class has been tested to work just before the incident.
Has anyone got this problem before?

Just an update here:
I copied the entire library of my fla and put it in a fresh
fla file. My original fla has nothing on the main timeline so I
figured I'd just rebuild the thing.
So, upon compiling the first time in it's new fresh file, I
get this compiler error:
, Line 1: 5005: Unknown error optimizing byte code.
Good. No longer do my symbols cause Reference Errors, I
thought to myself. After pursuing this error on the forums, I
gathered I just need to restart the flash ide. I did so, and went
to rebuild the fresh fla...
One single line in the output window:
ReferenceError: Error #1065: Variable ComponentShim is not
defined.
After wiping the tears from my eyes, I've come to post here
again in hopes someone can help me.
Here is my directory structure and names of files:
/public_html/
/webdev/
/game/
/MarbleMaze2/
/Game.as
/marblemaze.fla
/Maze.as
/MazeConstants.as
/Boards.as
marblemaze.fla has no document class specified in the
Document Class field, just a few lines of actionscript that creates
a new Game() on frame 1.

ReferenceError: Error #1065: Variable {ClassName} is not defined

Hi,
I am getting the following error for each of around 520
symbols in my library when I run my .fla file in Flash CS4:
ReferenceError: Error #1065: Variable {ClassName} is not
defined.
My .fla does not use a document class nor are any of my
classes using the same name. Any ideas on what the problem could
be?

Just an update here:
I copied the entire library of my fla and put it in a fresh
fla file. My original fla has nothing on the main timeline so I
figured I'd just rebuild the thing.
So, upon compiling the first time in it's new fresh file, I
get this compiler error:
, Line 1: 5005: Unknown error optimizing byte code.
Good. No longer do my symbols cause Reference Errors, I
thought to myself. After pursuing this error on the forums, I
gathered I just need to restart the flash ide. I did so, and went
to rebuild the fresh fla...
One single line in the output window:
ReferenceError: Error #1065: Variable ComponentShim is not
defined.
After wiping the tears from my eyes, I've come to post here
again in hopes someone can help me.
Here is my directory structure and names of files:
/public_html/
/webdev/
/game/
/MarbleMaze2/
/Game.as
/marblemaze.fla
/Maze.as
/MazeConstants.as
/Boards.as
marblemaze.fla has no document class specified in the
Document Class field, just a few lines of actionscript that creates
a new Game() on frame 1.

BMR-SS backup fails with error "the specified network name is no longer available"

We are running DPM 2012 SP1 on a Windows Server 2008 R2 system, backing up a Windows Server 2012 system that is a DC. The agent version is 4.1.3417.0. Both the DPM server and the DC are physical systems - brand new HP Proliant 360's.
When creating the replicas for the 2012 server the first time, the backups work fine, and then for a day or so after that. After a couple of days, the BMR-SS backups fail with the error "the specified network name is no longer available".
I can watch the backup happening in the Windows Server Backup console on the protected server - the BMR backup goes up to 99% and then fails. BMR backups on all the other servers are working - we have a mix of Win2008R2 and Win2012.
Here is what I have tried:
I can connect to the UNC path on the backup server without a problem during and after the backup is happening.
Tried reinstalling the DPM agent.
Tried backing up directly from the protected server to another server's network share, which worked.
I can copy multiple gigabyte files directly from the protected server to the DPM file share without a problem (the same one that DPM uses for the replica)
Tried turning off the SCEP real-time protection during the backup.
Any help would be appreciated - thanks.
KW

llo Boudewijn
I followed Boudewijn's suggestion.
The Windows 2012R2 servers had no recovery partition in disk C. I created one (400MB) following http://support.microsoft.com/kb/2930294/en-us and
DPM system restore worked. But just once.
So this is not the solution to the problem......
Is no one else having issues with DPM bare metal protection of Windows 2012R2 servers?

Exception fault: ReferenceError: Error #1065: Variable ::_fileSystemType is not defined. - ?

Hi! I'm stuck with debugging our AIR Application since it does crash very hard. After days of tracking down at least one point where the app crashes on AIR 3.5, 3.7 and AIR 3.8 beta (you see - I tried...).
AIR 3.5 finally reports this console output:
ScrollerTouch.onTargetMouseDown()-F true // A
ScrollerTouch.onTargetMouseDown()-I // B
targetV [object ScrollPane] // C
CRASH! // D
Exception fault: ReferenceError: Error #1065: Variable ::_fileSystemType is not defined.
          at global/trace()[int:49]
          at de.superclass.control::ScrollerTouch/onTargetMouseDown()[/path/to/.../ScrollerTouch.as:381]
          at de.superclass.control::ScrollerTouch/onTargetMouseDown()
The code snipped:
trace("ScrollerTouch.onTargetMouseDown()-F", _scrollHorizontal ); // A
switch ( _scrollPolicyVertical )
case ScrollPolicy.ON:
trace("ScrollerTouch.onTargetMouseDown()-G");
_scrollVertical = true;
                                        break;
case ScrollPolicy.OFF:
trace("ScrollerTouch.onTargetMouseDown()-H");
_scrollVertical = false;
                                        break;
case ScrollPolicy.AUTO:
trace("ScrollerTouch.onTargetMouseDown()-I"); // B
default:
                                                  trace( "targetV", targetV ); // C
                                                  try
                                                            trace( "targetV.height", targetV.height );
                                                  catch( e: Error )
                                                            trace( "CRASH!" ); // D
                                                  _scrollVertical = Boolean( targetV.height < targetV.contentHeight ); // line 381
trace( "targetV.xxx" );
                                                  trace( "targetV.contentHeight", targetV.contentHeight );
return;
So accessing targetV.height somehow crashes very hard (app quits) but I have no clue at all. Actually, this code worked for a long time...
So please, what is ::_fileSystemType ?

I changed the code again but the app keeps crashing. This is what XCode-Console says:
Jul 4 21:25:48 iRad-3 ReportCrash[1206] <Notice>: Formulating crash report for process APP_NAME[1191]
Jul 4 21:25:48 iRad-3 backboardd[26] <Warning>: BKSendGSEvent ERROR sending event type 3001: (ipc/send) invalid destination port (0x10000003)
Jul 4 21:25:48 iRad-3 backboardd[26] <Warning>: BKSendGSEvent ERROR sending event type 3001: (ipc/send) invalid destination port (0x10000003)
Jul 4 21:25:48 iRad-3 backboardd[26] <Warning>: BKSendGSEvent ERROR sending event type 3001: (ipc/send) invalid destination port (0x10000003)
Jul 4 21:25:48 iRad-3 ReportCrash[1206] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
Jul 4 21:25:48 iRad-3 com.apple.launchd[1] (UIKitApplication:APP_NAME_SPACE[0x469][1191]) <Warning>: (UIKitApplication:APP_NAME_SPACE[0x469]) Job appears to have crashed: Segmentation fault: 11
Jul 4 21:25:48 iRad-3 backboardd[26] <Warning>: Application 'UIKitApplication:APP_NAME_SPACE[0x469]' exited abnormally with signal 11: Segmentation fault: 11
Jul 4 21:25:48 iRad-3 ReportCrash[1206] <Notice>: Saved crashreport to /var/mobile/Library/Logs/CrashReporter/APP_NAME_2013-07-04-212547_iRad-3.plist using uid: 0 gid: 0, synthetic_euid: 501 egid: 0
Jul 4 21:25:55 iRad-3 kernel[0] <Debug>: launchd[1207] Builtin profile: container (sandbox)
Jul 4 21:25:55 iRad-3 kernel[0] <Debug>: launchd[1207] Container: /private/var/mobile/Applications/CDA04278-5D34-4609-BE71-D66FB16794C1 (sandbox)
Jul 4 21:25:56 iRad-3 kernel[0] <Debug>: launchd[1208] Builtin profile: PasteBoard (sandbox)
Jul 4 21:25:56 iRad-3 backboardd[26] <Warning>: CoreAnimation: updates deferred for too long
Jul 4 21:25:56 iRad-3 backboardd[26] <Warning>: CoreAnimation: timed out fence 2685b
And here's the Crash Log:
Jul 4 21:25:48 iRad-3 ReportCrash[1206] <Notice>: Formulating crash report for process APP_NAME[1191]
Jul 4 21:25:48 iRad-3 backboardd[26] <Warning>: BKSendGSEvent ERROR sending event type 3001: (ipc/send) invalid destination port (0x10000003)
Jul 4 21:25:48 iRad-3 backboardd[26] <Warning>: BKSendGSEvent ERROR sending event type 3001: (ipc/send) invalid destination port (0x10000003)
Jul 4 21:25:48 iRad-3 backboardd[26] <Warning>: BKSendGSEvent ERROR sending event type 3001: (ipc/send) invalid destination port (0x10000003)
Jul 4 21:25:48 iRad-3 ReportCrash[1206] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
Jul 4 21:25:48 iRad-3 com.apple.launchd[1] (UIKitApplication:APP_NAME_SPACE[0x469][1191]) <Warning>: (UIKitApplication:APP_NAME_SPACE[0x469]) Job appears to have crashed: Segmentation fault: 11
Jul 4 21:25:48 iRad-3 backboardd[26] <Warning>: Application 'UIKitApplication:APP_NAME_SPACE[0x469]' exited abnormally with signal 11: Segmentation fault: 11
Jul 4 21:25:48 iRad-3 ReportCrash[1206] <Notice>: Saved crashreport to /var/mobile/Library/Logs/CrashReporter/APP_NAME_2013-07-04-212547_iRad-3.plist using uid: 0 gid: 0, synthetic_euid: 501 egid: 0
Jul 4 21:25:55 iRad-3 kernel[0] <Debug>: launchd[1207] Builtin profile: container (sandbox)
Jul 4 21:25:55 iRad-3 kernel[0] <Debug>: launchd[1207] Container: /private/var/mobile/Applications/CDA04278-5D34-4609-BE71-D66FB16794C1 (sandbox)
Jul 4 21:25:56 iRad-3 kernel[0] <Debug>: launchd[1208] Builtin profile: PasteBoard (sandbox)
Jul 4 21:25:56 iRad-3 backboardd[26] <Warning>: CoreAnimation: updates deferred for too long
Jul 4 21:25:56 iRad-3 backboardd[26] <Warning>: CoreAnimation: timed out fence 2685b
And here's the Crash Log:
Incident Identifier: 17615510-16A5-43B9-B8A5-2ED2C5A2EEBA
CrashReporter Key:   3f85661334bfff23c2d4128bc63674d30647c15b
Hardware Model:      iPad3,3
Process:         APP_NAME [1191]
Path:            /var/mobile/Applications/CDA04278-5D34-4609-BE71-D66FB16794C1/APP_NAME.app/APP_NAME
Identifier:      APP_NAME
Version:         ??? (???)
Code Type:       ARM (Native)
Parent Process: launchd [1]
Date/Time:       2013-07-04 21:25:47.935 +0200
OS Version:      iOS 6.1.3 (10B329)
Report Version: 104
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x4095e008
Crashed Thread: 0
Thread 0 name: Dispatch queue: com.apple.main-thread
Thread 0 Crashed:
0   APP_NAME        0x008c71c8 0x1000 + 9200072
1   APP_NAME        0x005284ac 0x1000 + 5403820
2   APP_NAME        0x007b5edc 0x1000 + 8081116
3   APP_NAME        0x00002928 0x1000 + 6440
4   APP_NAME        0x0045f128 0x1000 + 4579624
5   APP_NAME        0x0045f5f8 0x1000 + 4580856
6   APP_NAME        0x0045eeb4 0x1000 + 4578996
7   APP_NAME        0x0045eab4 0x1000 + 4577972
8   APP_NAME        0x003d98d8 0x1000 + 4032728
9   APP_NAME        0x003c59c0 0x1000 + 3951040
10 APP_NAME        0x00443d24 0x1000 + 4468004
11 APP_NAME        0x009d5448 0x1000 + 10306632
12 APP_NAME        0x009d509c 0x1000 + 10305692
13 APP_NAME        0x009d4ad0 0x1000 + 10304208
14 APP_NAME        0x009d6618 0x1000 + 10311192
15 APP_NAME        0x00cf4d40 0x1000 + 13581632
16 APP_NAME        0x00a5f418 0x1000 + 10871832
17 APP_NAME        0x008d810c 0x1000 + 9269516
18 APP_NAME        0x009b45ac 0x1000 + 10171820
19 APP_NAME        0x009b5140 0x1000 + 10174784
20 UIKit                         0x347ff51e -[UIWindow _sendTouchesForEvent:] + 314
21 UIKit                         0x347ec7fc -[UIApplication sendEvent:] + 376
22 UIKit                         0x347ec116 _UIApplicationHandleEvent + 6150
23 GraphicsServices              0x364e05a0 _PurpleEventCallback + 588
24 GraphicsServices              0x364e01ce PurpleEventCallback + 30
25 CoreFoundation                0x329b9170 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE1_PERFORM_FUNCTION__ + 32
26 CoreFoundation                0x329b9112 __CFRunLoopDoSource1 + 134
27 CoreFoundation                0x329b7f94 __CFRunLoopRun + 1380
28 CoreFoundation                0x3292aeb8 CFRunLoopRunSpecific + 352
29 CoreFoundation                0x3292ad44 CFRunLoopRunInMode + 100
30 GraphicsServices              0x364df2e6 GSEventRunModal + 70
31 UIKit                         0x348402fc UIApplicationMain + 1116
32 APP_NAME        0x008f5c0c 0x1000 + 9391116
33 APP_NAME        0x00d2b0e0 0x1000 + 13803744
Thread 1 name: Dispatch queue: com.apple.libdispatch-manager
Thread 1:
0   libsystem_kernel.dylib        0x3ad76648 kevent64 + 24
1   libdispatch.dylib             0x3aca6974 _dispatch_mgr_invoke + 792
2   libdispatch.dylib             0x3aca6654 _dispatch_mgr_thread$VARIANT$mp + 32
Thread 2 name: WebThread
Thread 2:
0   libsystem_kernel.dylib        0x3ad75eb4 mach_msg_trap + 20
1   libsystem_kernel.dylib        0x3ad76048 mach_msg + 36
2   CoreFoundation                0x329b9040 __CFRunLoopServiceMachPort + 124
3   CoreFoundation                0x329b7d9e __CFRunLoopRun + 878
4   CoreFoundation                0x3292aeb8 CFRunLoopRunSpecific + 352
5   CoreFoundation                0x3292ad44 CFRunLoopRunInMode + 100
6   WebCore                       0x3891a500 RunWebThread(void*) + 440
7   libsystem_c.dylib             0x3acdf30e _pthread_start + 306
8   libsystem_c.dylib             0x3acdf1d4 thread_start + 4
Thread 3:
0   libsystem_kernel.dylib        0x3ad75eb4 mach_msg_trap + 20
1   libsystem_kernel.dylib        0x3ad76048 mach_msg + 36
2   APP_NAME        0x00480b04 0x1000 + 4717316
3   libsystem_c.dylib             0x3acdf30e _pthread_start + 306
4   libsystem_c.dylib             0x3acdf1d4 thread_start + 4
Thread 4:
0   libsystem_kernel.dylib        0x3ad8608c __psynch_cvwait + 24
1   libsystem_c.dylib             0x3acd7d2a _pthread_cond_wait + 642
2   libsystem_c.dylib             0x3ace1f14 pthread_cond_wait + 36
3   APP_NAME        0x00a33ad4 0x1000 + 10693332
4   APP_NAME        0x0097d9e0 0x1000 + 9947616
5   APP_NAME        0x00a33938 0x1000 + 10692920
6   APP_NAME        0x00a3398c 0x1000 + 10693004
7   APP_NAME        0x00a336b8 0x1000 + 10692280
8   libsystem_c.dylib             0x3acdf30e _pthread_start + 306
9   libsystem_c.dylib             0x3acdf1d4 thread_start + 4
Thread 5:
0   libsystem_kernel.dylib        0x3ad8608c __psynch_cvwait + 24
1   libsystem_c.dylib             0x3acd7d2a _pthread_cond_wait + 642
2   libsystem_c.dylib             0x3ace1f14 pthread_cond_wait + 36
3   APP_NAME        0x00a33ad4 0x1000 + 10693332
4   APP_NAME        0x0097d9e0 0x1000 + 9947616
5   APP_NAME        0x00a33938 0x1000 + 10692920
6   APP_NAME        0x00a3398c 0x1000 + 10693004
7   APP_NAME        0x00a336b8 0x1000 + 10692280
8   libsystem_c.dylib             0x3acdf30e _pthread_start + 306
9   libsystem_c.dylib             0x3acdf1d4 thread_start + 4
Thread 6:
0   libsystem_kernel.dylib        0x3ad866a4 __semwait_signal + 24
1   libsystem_c.dylib             0x3ace43ce nanosleep + 138
2   APP_NAME        0x00a33724 0x1000 + 10692388
3   APP_NAME        0x00913638 0x1000 + 9512504
4   APP_NAME        0x009135d8 0x1000 + 9512408
5   APP_NAME        0x00a33938 0x1000 + 10692920
6   APP_NAME        0x00a3398c 0x1000 + 10693004
7   APP_NAME        0x00a336b8 0x1000 + 10692280
8   libsystem_c.dylib             0x3acdf30e _pthread_start + 306
9   libsystem_c.dylib             0x3acdf1d4 thread_start + 4
Thread 7:
0   libsystem_kernel.dylib        0x3ad8608c __psynch_cvwait + 24
1   libsystem_c.dylib             0x3acd7d2a _pthread_cond_wait + 642
2   libsystem_c.dylib             0x3acd7aa0 pthread_cond_timedwait + 40
3   APP_NAME        0x00a33b54 0x1000 + 10693460
4   APP_NAME        0x000a7254 0x1000 + 680532
5   APP_NAME        0x00a33938 0x1000 + 10692920
6   APP_NAME        0x00a3398c 0x1000 + 10693004
7   APP_NAME        0x00a336b8 0x1000 + 10692280
8   libsystem_c.dylib             0x3acdf30e _pthread_start + 306
9   libsystem_c.dylib             0x3acdf1d4 thread_start + 4
Thread 8:
0   libsystem_kernel.dylib        0x3ad866a4 __semwait_signal + 24
1   libsystem_c.dylib             0x3ace43ce nanosleep + 138
2   APP_NAME        0x00a33724 0x1000 + 10692388
3   APP_NAME        0x008caff0 0x1000 + 9215984
4   APP_NAME        0x008cae08 0x1000 + 9215496
5   APP_NAME        0x00a33938 0x1000 + 10692920
6   APP_NAME        0x00a3398c 0x1000 + 10693004
7   APP_NAME        0x00a336b8 0x1000 + 10692280
8   libsystem_c.dylib             0x3acdf30e _pthread_start + 306
9   libsystem_c.dylib             0x3acdf1d4 thread_start + 4
Thread 9 name: com.apple.NSURLConnectionLoader
Thread 9:
0   libsystem_kernel.dylib        0x3ad75eb4 mach_msg_trap + 20
1   libsystem_kernel.dylib        0x3ad76048 mach_msg + 36
2   CoreFoundation                0x329b9040 __CFRunLoopServiceMachPort + 124
3   CoreFoundation                0x329b7d9e __CFRunLoopRun + 878
4   CoreFoundation                0x3292aeb8 CFRunLoopRunSpecific + 352
5   CoreFoundation                0x3292ad44 CFRunLoopRunInMode + 100
6   Foundation                    0x332773d0 +[NSURLConnection(Loader) _resourceLoadLoop:] + 304
7   Foundation                    0x332fae80 __NSThread__main__ + 968
8   libsystem_c.dylib             0x3acdf30e _pthread_start + 306
9   libsystem_c.dylib             0x3acdf1d4 thread_start + 4
Thread 10 name: com.apple.CFSocket.private
Thread 10:
0   libsystem_kernel.dylib        0x3ad86594 __select + 20
1   CoreFoundation                0x329bd1f2 __CFSocketManager + 674
2   libsystem_c.dylib             0x3acdf30e _pthread_start + 306
3   libsystem_c.dylib             0x3acdf1d4 thread_start + 4
Thread 11:
0   libsystem_kernel.dylib        0x3ad86d98 __workq_kernreturn + 8
1   libsystem_c.dylib             0x3acd4cf6 _pthread_workq_return + 14
2   libsystem_c.dylib             0x3acd4a12 _pthread_wqthread + 362
3   libsystem_c.dylib             0x3acd48a0 start_wqthread + 4
Thread 12:
0   libsystem_kernel.dylib        0x3ad8608c __psynch_cvwait + 24
1   libsystem_c.dylib             0x3acd7d68 _pthread_cond_wait + 704
2   libsystem_c.dylib             0x3aceb080 pthread_cond_timedwait_relative_np + 12
3   APP_NAME        0x00a7e558 0x1000 + 10999128
4   APP_NAME        0x00a7e200 0x1000 + 10998272
5   APP_NAME        0x00a7e0f8 0x1000 + 10998008
6   APP_NAME        0x00a33938 0x1000 + 10692920
7   APP_NAME        0x00a3398c 0x1000 + 10693004
8   APP_NAME        0x00a336b8 0x1000 + 10692280
9   libsystem_c.dylib             0x3acdf30e _pthread_start + 306
10 libsystem_c.dylib             0x3acdf1d4 thread_start + 4
Thread 13:
0   libsystem_kernel.dylib        0x3ad86d98 __workq_kernreturn + 8
1   libsystem_c.dylib             0x3acd4cf6 _pthread_workq_return + 14
2   libsystem_c.dylib             0x3acd4a12 _pthread_wqthread + 362
3   libsystem_c.dylib             0x3acd48a0 start_wqthread + 4
Thread 0 crashed with ARM Thread State (32-bit):
    r0: 0x4095e000    r1: 0x2fdfdf58      r2: 0x0052844c      r3: 0x2fdfdf1c
    r4: 0x00000221    r5: 0x084d8060      r6: 0x2fdfdf14      r7: 0x2fdfdf88
    r8: 0x2fdfdf20    r9: 0x000003fe     r10: 0x4095e000     r11: 0x00000000
    ip: 0x000002fc    sp: 0x2fdfdf10      lr: 0x005284b0      pc: 0x008c71c8
cpsr: 0x20000010
This immediately occurs when I touch and move a little on a specific display object which listens to Mouse-Events DOWN, MOVE to drag it's contents. I think it has something to do with the event system or so. But I'm absolutely blind I guess.
What could I do?

Very Strange: ReferenceError: Error #1065: Variable txtToonName is not defined.

I have a flash label on a movie clip with its instance name called 'txtToomName'. This object has existed, been successfully instantiated and used for over a year without any modifications. All of a sudden, during the getClassByName() call, I start getting an errors.
The actual error is:
ReferenceError: Error #1065: Variable txtToonName is not defined.
at mcToonInformation_Design/__setTab_txtToonName_mcToonInformation_Design_Layer1_0()
There are other objects on the movieclip, defined as buttons, that were derived from an object in the library that didn't have its linkage set. This had worked fine up til now where I could define a common object without linkage, create copies of that object on a movie clip and assign an instance name to allow access.
Once I changed my buttons to be an instance of an object in the library with linkage properties assigned they didn't give me an error. The problem now is that it doesn't seem to like the Label object which is by default an instance of an object in the library that does have linkage properties set and yet still doesn't like it.
Anyone have any idea what the heck is going on? There hasn't been any library changes made or CS5 updates applied since 8/16/2010, the date on flash.exe.
I am using CS5 ver.11.0.2.489
Any advise/direction/assistance would be greatly appreciated as this is a show stopper and adds hours upon hours of adjustments to an application that has been running fine for a long time.
Message was edited by: whornak
In an attempt to get beyond the previously mentioned error, realizing that it references 'tab', I made the label inaccessible and now receive the following error:
ReferenceError: Error #1065: Variable txtToonName is not defined.
at mcToonInformation_Design/__setAcc_txtToonName_mcToonInformation_Design_Layer1_0()

Upon attempted execution, after changing the setting you requested, the following is what I get.
ReferenceError: Error #1065: Variable lblCoinQty is not defined.
at mcToonInformation_Design/__setTab_lblCoinQty_mcToonInformation_Design_Layer1_0()[mcToonIn formation_Design::__setTab_lblCoinQty_mcToonInformation_Design_Layer1_0:1]
at mcToonInformation_Design()
at BPBGlobalFunctions$/getCasaMovieClipFromBulkLoader()[D:\Wayne\WizardBrewStudios\BackPackB uddys_Dev\BackPackBuddys_CS5_SFSX2\src\classes\BPBGlobalFunctions.as:167]
at com.bpb.ui::ToonInformationUI$/loadToonInformationUI()
at com.bpb::BackPackBuddys/onToonInformationLoadRequest()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at com.bpb.avatar::ExampleAvatar/onToonClick()
Cannot display source code at this location.
Another thing noticed is that the object that flash is having an issue making adjustments to is visible via the Variables window and has the tabindex property.

ReferenceError: Error #1065: Variable @namespace is not defined.

I am using FB4 but SDK 3.5. I created a webservice to call a webservice by .Net. The related codes are listed below
<mx:WebService id="ws"   wsdl="{URL_WSDL2}" fault="wsHandleFault(event)" useProxy="false" >
<mx:operation name="GetDistrict"
   resultFormat="object"
   result="GetDistrict(event)" />
<mx:operation name="GetStates"
   resultFormat="object"
   result="GetStates(event)" />
</mx:WebService>
private function LoadData():void {;
ws.getOperation("GetDistrict").send();
ws.getOperation("GetStates").send();
btnLoad.enabled = false;
However, I got runtime error:
ReferenceError: Error #1065: Variable @namespace is not defined.
at mx.rpc.xml::SchemaLoader/schemaImports()
at mx.rpc.wsdl::WSDLLoader/schemaImports()
at mx.rpc.wsdl::WSDLLoader/resultHandler()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at HTTPOperation/http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()
at mx.rpc::AbstractInvoker/http://www.adobe.com/2006/flex/mx/internal::resultHandler()
at mx.rpc::Responder/result()
at mx.rpc::AsyncRequest/acknowledge()
at DirectHTTPMessageResponder/completeHandler()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()
I really don't know how to fix it. Wish someone can share his/her experience. Thanks.

When creating a Web Service in .NET, specifically a WCF based Web Service, the auto generated code tends to have an empty namespace (for you to fill). If you specify a namespace for the service contract and behavior this tends to resolve the Flex issue.
e.g. in your .NET service or service interface code you can specify them as attributes and would look something like:
' VB
Imports System.ServiceModel
<ServiceContract(Namespace:="http://somedomain.com")>
<ServiceBehavior(Namespace:="http://somedomain.com")>
Public Class MyWebService
// C#
using System.ServiceModel;
[ServiceContract(Namespace:="http://somedomain.com")]
[ServiceBehavior(Namespace:="http://somedomain.com")]
public class MyWebService
Hope that helps someone!
(I realise this post is a bit old, but shows up high in Google for the error message, so have posted for the benefit of anyone finding it)

X79A-GD65 (8D) MSIHQ error 654 Specified path name or file name is invalid.

Hello,
First, excuse my poor english...
I would like to flash the 7760 v1.8 bios of my motherboard to install windows 8.1 on a crucial M500 480Go (yet, installing W8.1 after connect M500 on SATA1 6Go next to my M4 SSD with W7, causes errors during installation and I guess it is because i think the SSD is not correctly recognized by the bios and Windows 8.1 requires bios and ME updates.)
I download the last bios on MSI site (http://us.msi.com/product/mb/X79AGD65_8D.html#/?div=BIOS) and install MSIHQ Tool 1.25g software to make an USB stick for flashing as describe here : https://forum-en.msi.com/index.php?topic=116721.0
But when i point on the archive (3.1. Method 1: Processing a BIOS Archive Directly (ZIP/RAR)), MSIHQ can not open the archive and tell me: ERROR 654 Specified path name or file name is invalid.
Yet when I use the same method to flash my bios from 1.6 to 1.8, it had gone well ... What to do? Should I use the method described on the download page: http://fr.msi.com/files/pdf/Bios_update_SOPAll.pdf ?
Thank you and good day.

No, no... I know what a dual boot if it is what you say, I did it for years. I also made two differents drives with two separate systems boot : a Hdd with xp and boot.ini , and another with windows 7 and mbr. After installing the first OS first on a disc, you disconnect this HDD and connecting the second to receive the second OS. There is no dual boot because I did not boot on the same partition then let me choose between 2 OS placed on two differents drives or two partitions, but I boot well on two differents disks , each with their own boot files this just saves me the dual boot which I find too heavy. On a Gigabyte X48T -DQ6 with the F12 key , you choose what HDD boot . Same I think with the F11 key X79A - gd65 : "Press DEL key to enter Setup Menu , F11 to enter Boot Menu" and then you choose between booting on either disc. In the case cited above , it is then that we arrive on the mbr of windows 7 on a disc or boot.ini windows xp on the other. So you do not answer my question, it seems to me :-) I wonder if I'm clear, there ...;-)
thanks very much...

Error: The specified procedure could not be found

Apparently the password expired on my Windows 7 BETA installation. Upon restart the system notifies me and asks for a new password. After confirming the password I get the error:
"The specified procedure could not be found"
I cannot log in at this point. The old password won't let me in and I can't change it. The administrator account I found is disabled by default.
Is there any way to log in?

Okay, here is your dilemma.
You cannot login to your only account and the local administrator account is in its default disabled mode.
There is a solution, albeit totally unsupported. Go to http://www.sysresccd.org/Main_Page and download the latest SystemRescueCd. Burn a CD from the ISO. When you boot with the SystemRescue CD, you will type ntpass and hit <enter>. From there, make sure you read the screens. You will have make selections depending on how you loaded Windows 7 (clean vs. upgrade vs. dual boot, etc). Using this disk, you CAN enable the local administrator’s account and login in.
I just did the procedure using Windows 7, build 7000 with SystemRescueCd 1.1.6.
Good luck.

Captivate 5 and preloader: Error #1065: Variable CPPreloader is not defined.

Hi,
If I add a preloader swf (any of those which ship with Captivate 5 - in \Gallery\Preloaders\AS3) - then when I publish the movie - the flash player throws an error:
ReferenceError: Error #1065: Variable CPPreloader is not defined.
Then (mostly) crashes the plugin (firefox) else carries on with the captivate movie.
If I remove the preloader - all is fine again. I've tried every preloader swf, pretty much every option I can think of in publish settings.
Windows 7 64, I've got Flash 10.2.153.1 (debug). It looks to me like an error in the code written by Captivate, but if that were the case, I'm sure I would find some mention of the problem or the var CPPreloader elsewhere!
Anyone else seen this? Know how to make it go away??
Cheers

Are you adding preloaders from these locations?:
C:\Program Files\Adobe\Adobe Captivate 5\en_GB\Gallery\Preloaders in 32bit systems
or
C:\Program Files (x86)\Adobe\Adobe Captivate 5\en_GB\Gallery\Preloaders in 64bit systems
You mention you're using the debug versiion of Flash Player. Have you tested the published output on a system that IS NOT using the debug Flash player, just a normal Flash Player version?

ReferenceError: Error #1065: Variable onMediaComplete is not defined.

Does anyone know what the following means and how I can stop it constantly cropping up -
ReferenceError: Error #1065: Variable onMediaComplete is not defined.
          at GoogleAnalytics/registerEvents()
          at GoogleAnalytics/initialize()
          at com.brightcove.api::CustomModule/onTemplateReady()
          at flash.events::EventDispatcher/dispatchEventFunction()
          at flash.events::EventDispatcher/dispatchEvent()
          at com.brightcove.api.modules::ExperienceModule/wrapEvent()
          at flash.events::EventDispatcher/dispatchEventFunction()
          at flash.events::EventDispatcher/dispatchEvent()
          at com.brightcove.player.api.modules::ExperienceAPI/onPlayerInstanceReady()
          at flash.events::EventDispatcher/dispatchEventFunction()
          at flash.events::EventDispatcher/dispatchEvent()
          at com.brightcove.player::PlayerInstance/onContentLoad()
          at flash.events::EventDispatcher/dispatchEventFunction()
          at flash.events::EventDispatcher/dispatchEvent()
          at com.brightcove.player.content::ContentManager/onContentLoad()
          at com.brightcove.player.services::PersistentResponder/onResult()

Good work!
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/865/cpsid_86551.html#prob1=uninst,os=m10.6,
See in each Browser which version of Flash it thinks it has...
http://kb2.adobe.com/cps/155/tn_15507.html
Then Test Adobe Shockwave & Flash Players...
http://www.adobe.com/shockwave/welcome/

ReferenceError: Error #1065: Variable TCMText is not defined.

All,
I am working on aniMAC running 10.7.2 with Flash CS6
I built a Flash file that has been running excellent, until now. Now I am getting the following error that I can not figure out and no one seems to have the answer. Can some one (maybe even Adobe) please reply with a reason and a solution as to why it is happening and what I can do to fix it?
ReferenceError: Error #1065: Variable TCMText is not defined.
Some people thought it might be a simple changing of text properties (from TLX text to Classic text) but this does not fix the issue. I have also changed my memory settings, but this does not work either.
Many thanks,
HD

click file>publish settings>swf>actionscript settings (the wrench icon)>library path>and change the default linkage combobox to "merged into code". retest.

Error 32812 (Specified Tag Name not Defined) from FP Read

Similar Messages

Maybe you are looking for