Error 4 when updating the text data

When i am trying to load the data using IP i am facing the issue Error 4 when updating the text data.Please suggest me
Edited by: srikanth reddy612 on Dec 15, 2011 12:45 PM

hi srikanth,
you might have selected given lowercase data
and please check in the Infoobject the lowercase Checkbox is unchecked then it will allow you to update from IP.
also check in the Datasource fields tab whether particular field is unchecked with lowercase.
if checked all records you are pushing will have to be in uppercase.
thanks
Sankaresh S

Similar Messages

Error when tranfering the text data

Hi all
I am getting an error when transfering the text data thru flat files .
It is asking " No transfer structure available for the source system ," and saying that 0langu is not assigned to source syatem.I am working on 3.5.
pls suggest me.
thanks in advance
karna

here are teh steps:
1) craete source system in BW as say Flat_file
2) go to inforsource --? create inforsource --> right clik on infosource and say assign datasource
3) select flat_file here and say YES
4) then for flat file, trnafer structure mapping has to be done manually. so in trs struc screen ,go to datasource tab and enter your corresponding infoobject.
5) then go to tranfer rule tab and propose the rule.
If it helps, please assign points. In case of doubt, please get back
Regards
Pankaj

Error when extracting the text data

Hi all
I am getting an error when transfering the text data thru flat files .
It is asking " No transfer structure available for the source system ," and saying that 0langu is not assigned to source syatem.I am working on 3.5.
pls suggest me.
thanks in advance
karna

hi,
you have to decline 0LANGU, STTXT(short text), MDTXT(medium text),
LGTXT(long text), and respective key field(primary key) of attribute for
text data source. give the above five info object's in transfer structure for
text data source and activate it.
if helpful provide points
regards
harikrishna.N

Error when reading the access data(URL,user, password) for Adapter Engine

Hi,
We are getting this error in production system
"SXMBSysErrorAlerts, Category INTERNAL, Error code: AE_DETAILS_GET_ERROR error text: Error when reading the access data (URL, user, password) for the Adapter Engine".
Please tell what can be the cause of error. Where are the access data (URL, user, password) for the Adapter Engine read from?
Its urgent. We are in support project.
regards,
john

Hi jhon,
please check the following threads to resolve the problem.
AE_DETAILS_GET_ERROR
Error : no_adapter_engine_found: Unable to find Adapter Engine
regards
mahesh.

Read error when reading the master data of 0EMPLOYEE on demand, attribute 0

Hello All,
While loading data for HR data source 0HR_PA_OS_1 i am getting the below error message..
Error 1 in update.
Read error when reading the master data of 0EMPLOYEE on demand, attribute 0COMP_CODE
Please let me know how can it be resolved.
Regards
Rohit Parti

The problem occurs during data load from R/3. It was not occuring before. When I go to check the PSA contents I get a runtime error - GETWA_NOT_ASSIGNED.
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32821).
This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.

RPLDAP_EXTRACT - Error when updating the LDAP directory

I am connecting SAP IdM 7.0 to SAP HCM via VDS.
So far:
The VDS responds to LDAP browser, the connection tests from SAP GUI are succesful.
I can execute my copy of the standard report LDAPEXTRACT46C in SAP GUI and can see what data is exported.
I get the "Error when updating the LDAP directory" error when trying to execute the RPLDAP_EXTRACT program.
An error occurred during creation of one or more data records in the LDAP directory. The error has been logged in the system used to export data to the LDAP directory.
You can find logs in the database tables TLDA_LOG (HR-LDAP: Non-Exported Data Records) and TLDA_MSG (Error Messages About Data in Table TLDA_LOG). Table TLDA_LOG contains data records that could not be exported; table TLDA_MSG contains the corresponding messages.
I didn't see anything that makes sense in tables mentioned in the error message above.
I have some questions as the documentation supplied with IdM is bit brief; According to the configuration guide I don't need to have any mapping in VDS like "conversion of internal attributes" or "conversion from internal attributes", has anyone else entered the mapping in VDS?
Any pointers in going forward?
Edited by: pasikuikka on Oct 20, 2009 11:01 AM

Hi Pasikuikka,
just a few questions:
Have you checked TA HRLDAP_MAP? (Each field must have its expression in the LDAP-Target)
Have you checked TA LDAPMAP? (Each field must have its expression in the LDAP-Target)
Maybe there are attributes listed in the query, but not in the HCM-Staging-Area in the Identity Center.
Have been new attributes created in the HCM-Staging-Area and, if so, are they connected to the right Entry-Type (MX_HCM_Employee or something like that)?
Hope this puts you on the right track.
Kind regards,
Achim Heinekamp

Error when activating the master data

Hi
I am getting the following error when activating the master data. when using IDOC as transfer method in transfer rules
<b>Error while creating table 'EDISEGMENT' entry '/BIC/CIRB0CLASS_NUM_TEXT'</b>
If anyone came across this kind of problem plz share the solution.
Regards
Annie

Hi
I solved the problem. AFter changing from PSA to IDOC, i just saved first and activated. it got activated. But thanks for the response.
There are no short dumps in ST22
Regards
Annie

Error when reading the access data for the Adapter Engine

We are getting the following error in XI. It started on Jan 22 and resolved on Jan 23 automatically. Nothing has been changed and we don't able to understand how problem started and how it resolved:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.xpd.dbcixpd</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.xpd.dbcixpd</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.xpd.dbcixpd</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Pls suggest if anyone has gone thru same problem.
Regards
Amar

I got the same problem while using RFC lookup.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.tx1.netweaver</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.tx1.netweaver</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.tx1.netweaver</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any idea ,when we get this error usually.

Error when reading the DDIC-data for table

Hi Tobias
We upgraded from DMIS 2011 SP04 to SP07. We are in development system.
To test initial load, we stopped replication for an existing table and then started replication for the same table.
Mass transfer id connects ECC system to BW on HANA system.
Replication errored with the following message:
Error when reading the ddic-data for table MARD (RFC destination DWACLNT010).
Looking for your guidance.
Kind Regards
Kamaljit Vilkhoo

Was able to solve using oss note 1972533.

Error when generating the text environment

Hi Friends,
When iam logging on to SAPGUI iam able to lauch the gui but no text elements are being displayed the screen is completely blank and when i try to execute any transaction or perform any action.. the following error is getting displayed.
Err:sapgui:620
Error when generating the text Environment.
Please provide me the necessary help.
Regards
Khaiser

Hi,
Just a suggestion (not sure it will work) - upgrade your SAPGui to the latest one e.g. 7.10 or patch it.
Do you see text elements if accessing the sytem using DE language ?
Regards,
Mike

Error when updating the data from DSO to cube

Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
Annie

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

Error when initializing the Transaction data From ODS to CUBE.

Hi,
   we have initialized the load from source system to ODS. the load was successful, and when loading from ODS CUBE(initialization). it is giving the following message.
No SID found for value '0000436038' of characteristic 0CUST_SALES.
We have updated the master data of 0CUST_SALES (DELTA UPDATE).
but still getting the same message when updating the data packets from PSA. I am unable to find the reason.
Please let me know is there any other solution.
with regards,

Hi A.H.P,
   I have loaded master data for all the objects you have mentioned( atributes and texts). but still data packets are not getting updated. it is giving the message.
   i have also tried the elementary tests and combined tests of 0CUST_SALES, in RSRV. there were no errors found.
these data targets were newly implemented. would it be problem with routines or any other means.
Please let me know ASAP.
with regards.

Error when Updating the posted AR Document

Hi all
When i try to update the due date in the Posted AR Document it gives me an error stating that "This entry already exists in ADO1 Table(ODBC)"...
But i can update the same in the super user login... I thought it was an authorization problem... But the user updated few documents... for the rest he gets this error...
Marikannan

Hello Marikannan,
Please run the checking query:
Select T0.docentry, T0.objtype, T1.docentry
from ADO1 T0 Left join ADOC T1 on
T0.Docentry = T1.docentry and T0.objtype = T1.objtype and
T0.loginstanc = T1.loginstanc
where T1.docentry is null
If there is any result from this query, I think you should create a support ticke and send it
to the SAP Support Center.
Regards
Helen

Getting error when updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1

Hi,
I`m getting error message like "None of the apps in your project can be activated in the target. The manifest file of one or more apps contain API sets or Office applications that are not supported by
the target Office client. To debug those apps, update manifest files to exclude any unsupported API sets or Office applications, and then start the project again. Alternatively, you can debug your apps by using Office 365 as a target." when when
updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1 in manifest file though i have added host elements.
any help in this regard is highly appreciated
Thanks,
Santosh Sutar

Hi Satosh Sutar,
Based on the description, you got the error message when you update the apps from version 1.0 to 1.1.
From the error message, it seems the menifest include some settings no allowed in the new version. Would you mind sharing more detail about how you update the project?
And here is an article about updating apps for Office and menifest schema files in the project for your reference:
How to: Update the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error when updating BP Master Data

We need to update the BP Tax setup in the Business Partner Data. We just want to change the default withholding tax code and for some BP's we need to define it as suybject to withholding tax. After we did the changes when we click the 'UPDATE' button this error appears:Tax Code should be valid for A/P [ Business Partner - Tax Group ] [Message 3502-28].
Please help us resolve this issue.
Thanks.

Hi Eric,
Thanks for your immediate reponse.
The BP was defined as payment consolidation but they are not using consolidating BP. No consolidating BP was assigned on this BP.
The Note is not the scenario the client is encountering.
Is there any other resolution that could help us solve the issue.
Thanks.

Error 4 when updating the text data

Similar Messages

Maybe you are looking for