Error 403 while executing Web Service through Web Service Navigator

Hello All,
I am trying to execute "Create Sales Order" Web Service from WS Navigator. After filling all the input parameters and clicking on execute button, I get a error message
Failed Invalid Response code (403)
I know the execution is not reaching the back end proxy class. Any inputs on what could be causing this issue?
Regards,
Abhishek

Hi Abhishek,
Error code 403 means that the [access is forbidden.|http://en.wikipedia.org/wiki/HTTP_403]
This means that the user access that is being used to access the Web Service / Backend Proxy does not have enough authorizations to perform the action.
Check this user id, and its roles.
Regards,
Alka.

Similar Messages

  • Invalid element RenderOptionsSpec - CB error while calling Output Service through web service

    Hi,
          I am trying to call generatePDFOutput from Output Service through web service.
    I have generated the proxy class using RAD webservice client option by http://10.235.0.232:8080/soap/services/OutputService?wsdl
    here is my code
    OutputServiceServiceLocator outputService =new OutputServiceServiceLocator();URL serviceURL =
    new URL("http://10.235.0.232:8080/soap/services/OutputService?blob=base64");OutputServiceSoapBindingStub outputClient =
    new OutputServiceSoapBindingStub(serviceURL, outputService); 
    ((javax.xml.rpc.Stub) outputClient)._setProperty(javax.xml.rpc.Stub.
    USERNAME_PROPERTY,DSC_CREDENTIAL_USERNAME);((javax.xml.rpc.Stub) outputClient)._setProperty(javax.xml.rpc.Stub.
    PASSWORD_PROPERTY,DSC_CREDENTIAL_PASSWORD); 
    //Reference XML data to merge into the PDF document
    BLOB inData =new BLOB();inData.setBinaryData("Input xml in bytes");
    formName =
    "/AdobePOC/Forms/sample.xdp"; 
    //Set PDF run-time options
    PDFOutputOptionsSpec pdfOptions =new PDFOutputOptionsSpec();pdfOptions.setFileURI(
    "repository://"); 
    RenderOptionsSpec renderOptions =
    new RenderOptionsSpec();renderOptions.setCacheEnabled(
    true); 
    BLOBHolder generatePDFOutputPDFDoc =
    new BLOBHolder();BLOBHolder generatePDFOutputMetaDataDoc =
    new BLOBHolder();BLOBHolder generatePDFOutputResultDoc =
    new BLOBHolder();OutputResultHolder outResultHolder =
    new OutputResultHolder(); 
    //Create a PDF Document
    outputClient.generatePDFOutput(TransformationFormat.PDFA, formName,"repository://", pdfOptions, renderOptions,inData, generatePDFOutputPDFDoc,generatePDFOutputMetaDataDoc, generatePDFOutputResultDoc,outResultHolder);
    return generatePDFOutputResultDoc.value;
    I am getting the following error while executing the above code.
    09 17:05:05:407 IST] 00000028 SystemErr R AxisFault
      faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userExceptionfaultSubcode:
    faultString: 
    org.xml.sax.SAXException: Invalid element in com.adobe.livecycle.output.client.RenderOptionsSpec - CBfaultActor:
    faultNode:faultDetail:
    {}faultData:<ns1:exception xmlns:ns1="http://adobe.com/idp/services" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/><ns2:message xmlns:ns2="http://adobe.com/idp/services">Invalid element in com.adobe.livecycle.output.client.RenderOptionsSpec - CB</ns2:message>
    {http://xml.apache.org/axis/}hostname:A1AIGMD02018
     [6/25/09 17:05:05:407 IST] 00000028 SystemErr R org.xml.sax.SAXException: Invalid element in com.adobe.livecycle.output.client.RenderOptionsSpec - CB[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.message.SOAPFaultBuilder.createFault( 
    SOAPFaultBuilder.java:222)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.message.SOAPFaultBuilder.endElement( 
    SOAPFaultBuilder.java:129)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.encoding.DeserializationContext.endElement( 
    DeserializationContext.java:1087)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
    [6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown Source)
    [6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch( Unknown Source)
    [6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
    [6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
    [6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
    [6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
    [6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
    [6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.xerces.jaxp.SAXParserImpl.parse(Unknown Source)
    [6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.encoding.DeserializationContext.parse( 
    DeserializationContext.java:227)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.SOAPPart.getAsSOAPEnvelope( 
    SOAPPart.java:696)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.Message.getSOAPEnvelope( 
    Message.java:435)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke( 
    MustUnderstandChecker.java:62)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.client.AxisClient.invoke( 
    AxisClient.java:206)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.client.Call.invokeEngine( 
    Call.java:2784)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.client.Call.invoke( 
    Call.java:2767)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.client.Call.invoke( 
    Call.java:2443)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.client.Call.invoke( 
    Call.java:2366)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.axis.client.Call.invoke( 
    Call.java:1812)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.adobe.idp.services.OutputServiceSoapBindingStub.generatePDFOutput( 
    OutputServiceSoapBindingStub.java:579)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.adobe.idp.services.WebOutputService.call( 
    WebOutputService.java:70)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.aig.dbg.cto.service.webService.controller.ServiceCallThroWebService.call( 
    ServiceCallThroWebService.java:13)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.aig.dbg.cto.service.webService.controller.WebServiceHandler.perform( 
    WebServiceHandler.java:92)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.struts.action.ActionServlet.processActionPerform( 
    ActionServlet.java:1787)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.struts.action.ActionServlet.process( 
    ActionServlet.java:1586)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at org.apache.struts.action.ActionServlet.doGet( 
    ActionServlet.java:492)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.aig.dbg.cto.service.publishing.controller.PubServlet.doGet( 
    PubServlet.java:42)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at javax.servlet.http.HttpServlet.service( 
    HttpServlet.java:743)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at javax.servlet.http.HttpServlet.service( 
    HttpServlet.java:856)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.service( 
    ServletWrapper.java:966)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest( 
    ServletWrapper.java:478)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest( 
    ServletWrapper.java:463)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest( 
    WebApp.java:3129)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest( 
    WebGroup.java:238)[6/25/09 17:05:05:427 IST] 00000028 SystemErr R at com.ibm.ws.webcontainer.WebContainer.handleRequest( 
    WebContainer.java:811)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.ws.wswebcontainer.WebContainer.handleRequest( 
    WebContainer.java:1433)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.ws.webcontainer.channel.WCChannelLink.ready( 
    WCChannelLink.java:93)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination( 
    HttpInboundLink.java:465)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation( 
    HttpInboundLink.java:394)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete( 
    HttpICLReadCallback.java:102)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted( 
    AioReadCompletionListener.java:152)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.io.async.AbstractAsyncFuture.invokeCallback( 
    AbstractAsyncFuture.java:213)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.io.async.AbstractAsyncFuture.fireCompletionActions( 
    AbstractAsyncFuture.java:195)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.io.async.AsyncFuture.completed( 
    AsyncFuture.java:136)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.io.async.ResultHandler.complete( 
    ResultHandler.java:194)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.io.async.ResultHandler.runEventProcessingLoop( 
    ResultHandler.java:741)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.io.async.ResultHandler$2.run( 
    ResultHandler.java:863)[6/25/09 17:05:05:437 IST] 00000028 SystemErr R at com.ibm.ws.util.ThreadPool$Worker.run( 
    ThreadPool.java:1510)
    Please help me to fix this error.
    Thanks in advance
    Lavanya.

    Hodmi, Thanks for your reply.
    If i set RenderOptionsSpec values its not throwing Invalid element RenderOptionsSpec - CB error but its throwing ALC-DSC-000-000 internal error
    [6/26/09 17:11:35:021 IST] 00000029 SystemErr R AxisFault
    faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userExceptionfaultSubcode:
    faultString: 
    com.adobe.livecycle.output.exception.OutputException: ALC-DSC-000-000: com.adobe.idp.dsc.DSCException: Internal error.faultActor:
    faultNode:faultDetail:
    {}faultData:<ns1:result xmlns:ns1="http://adobe.com/idp/services" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
    {http://xml.apache.org/axis/}hostname:A1AIGMD01299
     [6/26/09 17:11:35:021 IST] 00000029 SystemErr R  
    com.adobe.livecycle.output.exception.OutputException: ALC-DSC-000-000: com.adobe.idp.dsc.DSCException: Internal error.[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.message.SOAPFaultBuilder.createFault( 
    SOAPFaultBuilder.java:222)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.message.SOAPFaultBuilder.endElement( 
    SOAPFaultBuilder.java:129)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.encoding.DeserializationContext.endElement( 
    DeserializationContext.java:1087)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
    [6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown Source)
    [6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch( Unknown Source)
    [6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
    [6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
    [6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
    [6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
    [6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
    [6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.xerces.jaxp.SAXParserImpl.parse(Unknown Source)
    [6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.encoding.DeserializationContext.parse( 
    DeserializationContext.java:227)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.SOAPPart.getAsSOAPEnvelope( 
    SOAPPart.java:696)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.Message.getSOAPEnvelope( 
    Message.java:435)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke( 
    MustUnderstandChecker.java:62)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.client.AxisClient.invoke( 
    AxisClient.java:206)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.client.Call.invokeEngine( 
    Call.java:2784)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.client.Call.invoke( 
    Call.java:2767)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.client.Call.invoke( 
    Call.java:2443)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.client.Call.invoke( 
    Call.java:2366)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at org.apache.axis.client.Call.invoke( 
    Call.java:1812)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at com.adobe.idp.services.OutputServiceSoapBindingStub.generatePDFOutput( 
    OutputServiceSoapBindingStub.java:579)[6/26/09 17:11:35:111 IST] 00000029 SystemErr R at com.adobe.idp.services.WebOutputService.call(WebOutputService.java)
    [6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.aig.dbg.cto.service.webService.controller.WebServiceHandler.perform( 
    WebServiceHandler.java:76)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at org.apache.struts.action.ActionServlet.processActionPerform( 
    ActionServlet.java:1787)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at org.apache.struts.action.ActionServlet.process( 
    ActionServlet.java:1586)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at org.apache.struts.action.ActionServlet.doGet( 
    ActionServlet.java:492)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.aig.dbg.cto.service.publishing.controller.PubServlet.doGet( 
    PubServlet.java:42)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at javax.servlet.http.HttpServlet.service( 
    HttpServlet.java:743)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at javax.servlet.http.HttpServlet.service( 
    HttpServlet.java:856)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.service( 
    ServletWrapper.java:966)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest( 
    ServletWrapper.java:478)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest( 
    ServletWrapper.java:463)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest( 
    WebApp.java:3129)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest( 
    WebGroup.java:238)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.webcontainer.WebContainer.handleRequest( 
    WebContainer.java:811)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.wswebcontainer.WebContainer.handleRequest( 
    WebContainer.java:1433)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.webcontainer.channel.WCChannelLink.ready( 
    WCChannelLink.java:93)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination( 
    HttpInboundLink.java:465)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation( 
    HttpInboundLink.java:394)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready( 
    HttpInboundLink.java:274)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators( 
    NewConnectionInitialReadCallback.java:214)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete( 
    NewConnectionInitialReadCallback.java:113)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted( 
    AioReadCompletionListener.java:152)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.io.async.AbstractAsyncFuture.invokeCallback( 
    AbstractAsyncFuture.java:213)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.io.async.AbstractAsyncFuture.fireCompletionActions( 
    AbstractAsyncFuture.java:195)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.io.async.AsyncFuture.completed( 
    AsyncFuture.java:136)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.io.async.ResultHandler.complete( 
    ResultHandler.java:194)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.io.async.ResultHandler.runEventProcessingLoop( 
    ResultHandler.java:741)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.io.async.ResultHandler$2.run( 
    ResultHandler.java:863)[6/26/09 17:11:35:121 IST] 00000029 SystemErr R at com.ibm.ws.util.ThreadPool$Worker.run( 
    ThreadPool.java:1510)
    Please help me to fix this also.
    Thanks in advance
    Lavanya.

  • Error while Submiting Support message through Web browser

    Hi Gurus
    I am geting error while submiting Support message through Web browser i.e BSP . Please find the error message below
    "Error: The system could not create the message because of an RFC connection "NONE " error Service-specific Csutomizing missing for transaction ZLFN"
    Note: ZLFN is our Service Desk Message type.
    Any ideas where i am doing wrong?
    Points will be rewarded
    Thanks
    Bhaskar

    Hello,
    check if when you configured your new transaction type ZLFN you have included a corresponding entry in view CRMC_SERVICE_H.
    If the transaction type is missing in this view, you have this error.
    Regards,
    Raquel Cunha

  • An error occcurred on line 105 while executing script 'MOM Backward Compatibility Service State Monitoring Script"

    We've been getting the following error for some time now.
    An error occurred on line 105 while executing script 'MOM Backward Compatibility Service State Monitoring Script'
    Source: Microsoft VBScript runtime error
    Description: The remote server machine does not exist or is unavailable: 'GetObject'
    One or more workflows were affected by this.
    Workflow name: System.Mom.BackwardCompatibility.ServiceStateMonitoring
    Instance name: server.domain.local
    Instance ID: {INSTANCE}
    Management group: GROUP
    Unfortunately the instance in question has since been decommissioned and simply does not exist any more. 
    We're currently on a repeat count of over 350,000 and I would REALLY like to get it stopped. I've had a look at adding an override but that points to the management server rather than the instance itself.
    Does anyone have any suggestions?
    thanks in advance!

    Hi Steven,
    There are for option for us to override a monitor ot rule:
    For all objects of class:             
    Class            
    When you select this option for your override, the override settings apply to all objects in the class at which the rule or monitor is targeted.
    For a group            
    When you select this option for your override, the override settings apply only to members of the group. The rule or monitor without the override settings continues to apply to all objects in the targeted class except for those objects that are also members
    of the group used for the override.
    When you create a group, you save it to an unsealed management pack. However, an element in an unsealed management pack, such as an override, cannot reference an element in a different unsealed management pack, such as a group. If you are going to use a group
    to limit the application of an override, you must either save the group to the same unsealed management pack as the override, or you must seal the management pack that contains the group.
    For a specific object of class:             
    Class            
    When you select this option for your override, the override settings apply only to the specified object. The rule or monitor without the override settings continues to apply to all other objects in the targeted class.
    For all objects of another class            
    When you select this option for your override, the override settings apply only to objects of a class other than the targeted class. The rule or monitor without the override settings continues to apply to all objects in the targeted class.
    Did you try to override it for a specific object of class?
    Regards,
    Yan Li
    Regards, Yan Li

  • Error while executing the payroll through transaction code PC00_M40_CALC

    Dear Sir/ Madam,
    While executing the payroll through the transaction code PC00_M40_CALC , i am getting the error as mentioned below :
    "Division by zero not performed "
    Calculation rule X0133****5            RTE = ISDIVP DIVID ARR ZERO=A   ADD
    I am not able to resolve this error. So request to guide me on this.
    Thanks & regards,
    vijaya.s.c.
    Moderator message: wrong forum, please have a look in the (I guess) ERP HCM forums.
    Edited by: Thomas Zloch on Jan 24, 2012

    Hi,
    Maintain have you changed any x013 rule?
    If not, just maintain attendance/time events then process the payroll.

  • App-V 5: Error encountered while executing command Mount-AppvClientPackage

    I am getting this error in which no Google search reveals anyone else as having reported it anywhere.  In fact, after having posted this, it was the only search result that came up with either of these two event ID's or errors.
    I am trying to sequence an in house application. It's a manual install. The application runs perfectly prior to creating the package so I am not sure what this "specified file" is that it can't find.  It says to refer to the AppV Client Event
    Log for more details. This event was *IN* the AppV Client Event Log and there was another event along side it.
    Event ID 9001
    Error encountered while executing command Mount-AppvClientPackage -PackageId eb77be98-bc44-45fd-a0e5-95e0c315808b -VersionId c5013ec7-0456-401b-b99e-d988d97bfa55. Error: Application Virtualization Service failed to complete requested operation. 
    Operation attempted: Mount Package. 
    Windows Error: 0x80070002 - The system cannot find the file specified
    Error module: Streaming Manager. Internal error detail: 74F0262C80070002. 
    Please consult AppV Client Event Log for more details.
    Event ID 14016
    The package {eb77be98-bc44-45fd-a0e5-95e0c315808b}
    version {c5013ec7-0456-401b-b99e-d988d97bfa55} could not be mounted
    because the network connection has been lost or is unavailable.  Check your network connection and try again.
    The network connection is still quite alive on the client and the firewall is disabled on the App-V server. I can still reach and view the xml file when browsing to the web service on the App-V server.  I can also run Sync-AppVPublishingServer from
    powershell without error.
    For more inside info on the app: 
    1. It is a manual install. A directory is simply copied to the hard drive manually.
    2. An ocx file gets registered from the Syswow64 directory.
    3. MySQL 5.1.13 client is installed.
    4. Shortcuts are created.
    5. A system DSN is created using C:\Windows\SysWOW64\odbcad32.exe
    6. The app runs perfectly on the sequencer prior to creating and publishing.
    UPDATE:
    Get-AppVClientPackage reveals this:
    PackageId            : eb77be98-bc44-45fd-a0e5-95e0c315808b
    VersionId            : c5013ec7-0456-401b-b99e-d988d97bfa55
    Name                 : Tietan
    Version              : 0.0.0.1
    Path                 : \\wuspappv01\appv1\TietanProd\Tietan.appv
    IsPublishedToUser    : True
    UserPending          : False
    IsPublishedGlobally  : False
    GlobalPending        : False
    InUse                : False
    InUseByCurrentUser   : False
    PackageSize          : 217155655
    PercentLoaded        : 0
    IsLoading            : False
    HasAssetIntelligence : True
    The path is accessible from the client server. I can see the file. It's there.

    Hello,
    If you execute get-appvclientpackage
    And then check what is the value for Path for the package you have an issue with.
    Most likely the error message means that the file in Path isn't reachable.
    As indicated here;
    The package {eb77be98-bc44-45fd-a0e5-95e0c315808b}
    version {c5013ec7-0456-401b-b99e-d988d97bfa55} could not be mounted
    because the network connection has been lost or is unavailable.  Check your network connection and try again.
    Nicke Källén | The Knack| Twitter:
    @Znackattack

  • Error during Portal Setup: An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount

    Error:
    Configure Portal Setup
    An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6
    This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
    Errors in the Log:
    MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
    CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
    MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
    CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
    I cannot get past this error. I am running Sharepoint Foundation 2010 with Sp1. This is on a Windows Server 2008 R2 Server +Sp1.
    Any ideas?
    David Baur

    I finally figured this out, The issue was that I had put in the Self Service Portal Computer Name and Service account into the Service Manager SQL as SysAdmin, once I removed it flew through just fine.
    David Baur

  • An error occurred while executing a custom action:_PopulateUserRoles

    I am trying to install Service Manager 2012 RTM onto a brand new server 2008r2. The purpose is to replace the other Data Management server that is giving me problems upgrading to service pack1. I go through the setup and connect to the SQL server and
    the database that has my existing DM. I am using the same credentials and everything is the same. It goes all the way to the end and I get an error :
    An error occurred while executing a custom action:_PopulateUserRoles
    This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this roll

    After this error, I reran setup and used the domain admin account instead of the Service Manager Admins group I created in AD. The  error did not happen again, but I did get the "Setup cannot complete - RollbackCleanup"
    error. This was fixed by following this link: "http://www.cireson.com/scsm/scsm-an-error-occurred/" and this MS article: "http://support.microsoft.com/kb/922918/en-us".
    These are the steps (I had to create the DWORD 32 bit):
    Click Start, click Run, type regedit, and then click
    OK.
    Locate and then click the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
    In the right pane, locate the ServicesPipeTimeout entry.
    Note  If the ServicesPipeTimeout entry does not exist, you must create it. To do this, follow these steps:
    On the Edit menu, point to
    New, and then click DWORD Value.
    Type ServicesPipeTimeout, and then press ENTER.
    Right-click ServicesPipeTimeout, and then click Modify.
    Click Decimal, type 60000, and then click
    OK.
    This value represents the time in milliseconds before a service times out.
    Restart the computer.
    Hope this helps!
    BR,
    Robert
    Robert

  • An unknown error occurred while executing the PowerShell script:

    Hello all,
    Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
    Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
    When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
    to exit and go back into VMM in order to get anything else to run.
    The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
    An unknown error occurred while executing the PowerShell script:
    The connection to the VMM management server scvmm2.mmmmmm.com was lost.
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Try the operation again. If the issue persists, contact Microsoft Help and Support.
    ID: 27235
    This is what I get in Events
    Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
    Log Name:      Microsoft-Windows-PowerShell/Operational
    Source:        Microsoft-Windows-PowerShell
    Date:          4/9/2015 3:27:04 PM
    Event ID:      4100
    Task Category: Executing Pipeline
    Level:         Warning
    Keywords:      None
    User:          mmmmmm\paufra
    Computer:      tools-francis.mmmmmm.com
    Description:
    Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
    Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
    service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Context:
            Severity = Warning
            Host Name = Default Host
            Host Version = 4.0
            Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
            Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
            Engine Version = 4.0
            Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
            Pipeline ID = 16
            Command Name = Get-SCReplicationGroup
            Command Type = Cmdlet
            Script Name =
            Command Path =
            Sequence Number = 91
            User = mmmmmm\paufra
            Shell ID = Microsoft.PowerShell
    User Data:
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
        <EventID>4100</EventID>
        <Version>1</Version>
        <Level>3</Level>
        <Task>106</Task>
        <Opcode>19</Opcode>
        <Keywords>0x0</Keywords>
        <TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
        <EventRecordID>285</EventRecordID>
        <Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
        <Execution ProcessID="2344" ThreadID="4076" />
        <Channel>Microsoft-Windows-PowerShell/Operational</Channel>
        <Computer>tools-francis.mmmmmm.com</Computer>
        <Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
      </System>
      <EventData>
        <Data Name="ContextInfo">        Severity = Warning
            Host Name = Default Host
            Host Version = 4.0
            Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
            Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
            Engine Version = 4.0
            Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
            Pipeline ID = 16
            Command Name = Get-SCReplicationGroup
            Command Type = Cmdlet
            Script Name =
            Command Path =
            Sequence Number = 91
            User = mmmmmm\paufra
            Shell ID = Microsoft.PowerShell
    </Data>
        <Data Name="UserData">
        </Data>
        <Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
    Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
    service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    </Data>
      </EventData>
    </Event>

    Hi Sir,
    First , please try to run the VMM configuration analyzer on that computer :
    http://www.microsoft.com/en-us/download/details.aspx?id=41555
    In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
    http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • SCSM2012 Beta installation problem: An error occurred while executing a custom action:_PopulateUserRoles

    I'm installing the SCSM2012 Management Server
    component on a SQL dev box.  During the installation, the very last step (Import Management Packs) fails with this error:
    An error occurred while executing a custom action:_PopulateUserRoles
    This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
    I've already verified that the account I'm logged in with has SA access to the SQL database.  Windows 2008 R2 firewall is turned off.....
    Has anybody else run into this problem?

    I don't see anything indicative in the setup log.  The setup seems to get all the way to the part where it installs the management packs.  Then right after that is when the installation fails and it rolls back.
    From the setup log, towards the end:
    Property(S): ACTIONSUSER = NETWORK SERVICE
    Property(S): ACTIONSDOMAIN = NT AUTHORITY
    Property(S): ACTIONSUSER_FOR_DB = NETWORK SERVICE
    Property(S): ACTIONSDOMAIN_FOR_DB = NT AUTHORITY
    Property(S): SOURCEDIR = C:\SCSM\SCSM2012_Beta\Setup\Server\
    Property(S): SourcedirProduct = {295201AE-EAB6-416C-8252-7C065243EF55}
    Property(S): ProductToBeRegistered = 1
    MSI (s) (9C:54) [17:33:22:951]: Note: 1: 1708
    MSI (s) (9C:54) [17:33:22:951]: Product: Microsoft System Center Service Manager 2012 -- Installation failed.
    MSI (s) (9C:54) [17:33:22:959]: Windows Installer installed the product. Product Name: Microsoft System Center Service Manager 2012. Product Version: 7.5.1354.0. Product Language: 0. Manufacturer: Microsoft Corporation. Installation success or error status:
    1603.
    MSI (s) (9C:54) [17:33:23:010]: Deferring clean up of packages/files, if any exist
    MSI (s) (9C:54) [17:33:23:013]: MainEngineThread is returning 1603
    MSI (s) (9C:20) [17:33:23:061]: RESTART MANAGER: Session closed.
    MSI (s) (9C:20) [17:33:23:061]: No System Restore sequence number for this installation.
    === Logging stopped: 11/7/2011  17:33:22 ===
    MSI (s) (9C:20) [17:33:23:065]: User policy value 'DisableRollback' is 0
    MSI (s) (9C:20) [17:33:23:065]: Machine policy value 'DisableRollback' is 0
    MSI (s) (9C:20) [17:33:23:065]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (9C:20) [17:33:23:065]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (9C:20) [17:33:23:066]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (9C:20) [17:33:23:067]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (s) (9C:20) [17:33:23:067]: Restoring environment variables
    MSI (s) (9C:20) [17:33:23:089]: Destroying RemoteAPI object.
    MSI (s) (9C:28) [17:33:23:089]: Custom Action Manager thread ending.
    MSI (c) (C8:B4) [17:33:23:144]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (C8:B4) [17:33:23:175]: MainEngineThread is returning 1603
    === Verbose logging stopped: 11/7/2011  17:33:23 ===

  • Error encountered while executing the transform

    My message failed at orchestration with the following error. Kindly help in finding the issue.
    xlang/s engine event log entry: Uncaught exception (see the 'inner exception' below) has suspended an instance of service 'Ibox.UNEDIFACT.CODECO.Orchestration.CodecoDownload(df91e55f-c6aa-914d-f042-acdb45bdcaf4)'.
    The service instance will remain suspended until administratively resumed or terminated.
    If resumed the instance will continue from its last persisted state and may re-throw the same unexpected exception.
    InstanceId: cc8fac84-47dc-4d31-be15-80c9f86ffaac
    Shape name: CodecoMapping
    ShapeId: 32b0a92d-82f7-4b3a-8e22-a94b53bf2804
    Exception thrown from: segment 1, progress 22
    Inner exception: Error encountered while executing the transform Ibox.UNEDIFACT.CODECO.Orchestration.CodecoMap. Error:Transformation failed..
    Exception type: XTransformationFailureException
    Source: Microsoft.XLANGs.Engine
    Target Site: Void ApplyInMemoryTransform(System.Type, Microsoft.XLANGs.RuntimeTypes.TransformMetaData, System.Object[], System.IO.Stream[])
    The following is a stack trace that identifies the location where the exception occured
       at Microsoft.XLANGs.Core.Service.ApplyInMemoryTransform(Type mapRef, TransformMetaData trfMetaData, Object[] outParams, Stream[] inStreams)
       at Microsoft.XLANGs.Core.Service.ApplyTransform(Type mapRef, Object[] outParams, Object[] inParams)
       at Ibox.UNEDIFACT.CODECO.Orchestration.CodecoDownload.segment1(StopConditions stopOn)
       at Microsoft.XLANGs.Core.SegmentScheduler.RunASegment(Segment s, StopConditions stopCond, Exception& exp)
    Additional error information:
            Exception has been thrown by the target of an invocation.
    Exception type: TargetInvocationException
    Source: mscorlib
    Target Site: System.Object InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)
    The following is a stack trace that identifies the location where the exception occured
       at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
       at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at Microsoft.XLANGs.BaseTypes.CompiledXsltWrapperTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, XmlWriter results, XmlResolver resolver)
       at Microsoft.XLANGs.BaseTypes.CompiledXsltWrapperTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, Stream output, XmlResolver resolver)
       at Microsoft.XLANGs.Core.Service.ApplyInMemoryTransform(Type mapRef, TransformMetaData trfMetaData, Object[] outParams, Stream[] inStreams)
    Additional error information:
            Attribute and namespace nodes cannot be added to the parent element after a text, comment, pi, or sub-element node has already been added.
    Exception type: XslTransformException
    Source: System.Data.SqlXml
    Target Site: Void ThrowInvalidStateError(System.Xml.XPath.XPathNodeType)
    The following is a stack trace that identifies the location where the exception occured
       at System.Xml.Xsl.Runtime.XmlQueryOutput.ThrowInvalidStateError(XPathNodeType constructorType)
       at System.Xml.Xsl.Runtime.XmlQueryOutput.ConstructInEnumAttrs(XPathNodeType rootType)
       at System.Xml.Xsl.Runtime.XmlQueryOutput.WriteStartAttribute(String prefix, String localName, String ns)
       at <xsl:template name="compiler:generated"> (36)(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current, Double {http://schemas.microsoft.com/BizTalk/2003/var}var:v237,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v239, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v240, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v242, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v244,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v246, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v248, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v250, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v252,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v255, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v256, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v258, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v259,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v261, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v262, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v264, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v265,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v267, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v268, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v271, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v272,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v281, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v283, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v284, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v286,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v287, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v289, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v290, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v292,
    String {http://schemas.microsoft.com/BizTalk/2003/var}var:v295)
       at <xsl:template name="compiler:generated"> (12)(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
       at <xsl:template match="/s2:Root">(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
       at <xsl:template match="/">(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
       at Root(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime)
       at Execute(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime)
       at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlSequenceWriter results)
       at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer)
       at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, XmlWriter results, XmlResolver documentResolver)

    Hi,
    It is clearly an issue in your map. You can test your map out of Orchestration to make sure it is working.
    "Exception has been thrown by the target of an invocation" is a very generic exception. you
    need the inner exception to see the actual error. You can also try to test the map in the MapTester tool. It also shows also the inner exception. It's designed for BizTalk 2010 but with the .exe file you maybe also can test BizTalk 2006 maps,.
    http://code.msdn.microsoft.com/Execute-a-BizTalk-map-from-26166441
    If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Facing Problem while executing a command through WLST

    Hi,
    Iam using Weblogic 11g(10.3.2).Whenever I execute the below command in WLST on windows it is working fine.
    reassociateSecurityStore(domain="base_domain",admin="cn=orcladmin",password="welcome1",ldapurl="ldap://<hostname>:389",servertype="OID",jpsroot="cn=jpsroot_idm_idmhost1")
    But whenever i execute the same in Linux,it is throwing the error as below:
    wls:/base_domain/serverConfig> reassociateSecurityStore(domain="base_domain",admin="cn=orcladmin",password="welcome1",ldapurl="ldap://<hoistname>:389",servertype="OID",jpsroot="cn=jpsroot_idm_idm1")
    Traceback (innermost last):
    File "<console>", line 1, in ?
    NameError: reassociateSecurityStore
    Please suggest....
    Regards
    Pavan

    Facing Problem while executing a command through WLST

  • Receiving the error message while executing the Real Time DTP

    Hi,
    I am receiving the error message while executing the Real time DTP for Billing data.
    Error Message - Record filtered in advance as error records with the same key exist     RSM2     722
    When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
    Diagnosis
    The existing DTP requires a serialized update because fields are updated
    non-commutatively during the processing run (for example, MOVE).
    Therefore all new data records that have the same semantic key as
    incorrect records that have not yet been corrected in earlier requests
    or earlier data packages of the same request, are filtered out after the
    extraction in a special step. In this way the system ensures that
    incorrect data records are not repeated for your changes, which may not
    contain errors themselves.
    System Response
    The data record is not updated but is written to an error stack.
    Procedure
    Procedure
    Correct all incorrect data records and update them using an error DTP.
    Procedure for System Administration
    I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
    Regards,
    Ram

    Hi Arvindh,
    Its  write optimized DSO.. there is no option to generate SIDs.
    Hi Kiran,
    I checked the link u sent me. Here the main issue is..The function module is standard  and its not allowing me  to do enhancement  point..
    Any idea in using Badi's??
    Thanks all...

  • [0098]SQL*Plus encountered oracle error 100 while executing SQL Statement

    Hi,
    i'm trying to delete duplicate records from a table and running following script. this script is triggered from a unix script. it successfully deletes the records but in the last throws following error message,
    :[0098]SQL*Plus encountered oracle error 100 while executing SQL Statement:2:Investigation required:
    can anybody please help? below is the script.
    DECLARE
    --CURSOR FOR DUPLICATE ROWS
    CURSOR CUR_DUPLICATE_ROWS IS
    Select RMS_NOTE_ID, RMS_SUMMARY_NOTE_ID, count(*) cnt from PARTY_NOTE
    group by RMS_NOTE_ID,RMS_SUMMARY_NOTE_ID having count(*) > 1;
    var_date PARTY_NOTE.PARTY_NOTE_CREATED_DATE%TYPE;
    BEGIN
    FOR DUPLICATE_ROWS_REC IN CUR_DUPLICATE_ROWS
    LOOP
    delete from party_note
    where RMS_NOTE_ID= DUPLICATE_ROWS_REC.RMS_NOTE_ID
    and RMS_SUMMARY_NOTE_ID= DUPLICATE_ROWS_REC.RMS_SUMMARY_NOTE_ID
    and rowid not in (select max(rowid) from party_note
    where RMS_NOTE_ID= DUPLICATE_ROWS_REC.RMS_NOTE_ID and RMS_SUMMARY_NOTE_ID= DUPLICATE_ROWS_REC.RMS_SUMMARY_NOTE_ID);
    commit;
    END LOOP;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    NULL;
    WHEN OTHERS THEN
    DBMS_OUTPUT.PUT_LINE(SQLERRM);
    ROLLBACK;
    END;

    Try this:
    delete party_note
    where  rowid not in (select max(rowid)
                         from   party_note
                         group  by rms_note_id, rms_summary_note_id
    commit;No need for cursors and loops.
    And when that's completed, consider ALTERing the table to add a unique index (or even a primary key) so you'll never need to do this again.

  • XL reporter error occurred while executing report! Rows: 25203 Columns: 30

    An error occurred while executing report! Rows: 25203 Columns: 30 Unspecified error
    One user gets this error when trying to run a custom XL report. It works for other users(on different PCs). The user can run other XL reports successfully.

    Hello  pls
    follow below procedure
    start->my computer>cdrive>program files >sap>sap business one> remove these two files 1).AddOnsInstall.sbo and 2).AddOnsLocalRegistration.sbo and clear all ur %temp%Files,prefetch,recent files and restart and open sap then u will get connected to xl reporter add on. and u will not get any errors
    regards
    Jenny

Maybe you are looking for

  • ABAP webDynpro MS Office component usage throws -  Access via 'NULL' object

    I am trying to include MS office word in my custom ABAP webDynro application based on the sample SAP Package SIOS for all the MS office component usage. <br> In WDMODIFY method  , when the courser is reaching the point to call office component  it th

  • Why aren't my photos in an alfabetical order?

    The photos that I sync from my Windows computer are in an alfabetical order on this computer. When I sync this Photos to my ipad, the are not always in an alfabetical order ( I sync complete maps). How can I avoid that the photos aren't in an alfabet

  • Field level Routine

    Hi, I have field level routine in Update rules. IF /BIC/ZDOCINDREF <> 'G' ZPCONTRAT = 0CONTRACT. ELSEIF /BIC/ZDOCINDREF ='K' ZSALSCNT = 0CONTRACT. ENDIF. It giving syntax error;E:Field "/BIC/ZDOCINDREF" is unknown. It is neither in one of the specifi

  • Help! Since I updated to 10.4.6 I can't open pages!

    I have an imac 10.6.3.  Recently I updated to Leopard 10.4.6 and now I cannot open pages.  I get the error: The document " " cannot be opened.  I looked in applications on the harddrive and iwork version 4.0 is still there.  Does anyone know how I ca

  • ACE Module and Limiting Connections

    We currently use the ACE module to Load-balancing IPSEC connection into SPA's.  Since the SPA's only support 60 new connections per second.  I was looking for a way to limit the amount of connecitons from the ACE to the SPA's.