Error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT

error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT nfs sharing

Never mind, I already found the solution myself.
What I did wrong was:
- not copying the master image to the nbi folder
- selecting the netinstall-restore.dmg image as source to copy to my HD.
The thing is, when you create a netinstall image for 10.5, the image itself is already included in the netinstall image so you don't have to do anything else.
With the 10.4 image however, you also have to copy the master image to the NetBootSP0 directory.
In the *.nbi folder contains an netinstall-restore.dmg file. But that is only to boot you to netrestore, it's not the image itself.
Other alternative is to copy the images to another folder that you share with AFP and adjust the configuration of netrestore like described in this manual:
http://www.shellharbourd.det.nsw.edu.au/pdf/misc/osxrestoringnet.pdf
This manual was also how I figured out that I forgot to copy the image to the NetBootSP0 folder.

Similar Messages

Images won't open in my gmail or websites can anybody help me? this happend when i updated to the newest version of Firefox

Question
Images won't open in my gmail or websites can anybody help me? This happen when I updated to the newest version of Firefox

If images are missing then check that you aren't blocking images from some domains.
See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
* Check the permissions for the domain in the current tab in Tools > Page Info > Permissions
* Check that images are enabled: Tools > Options > Content: [X] Load images automatically
* Check the exceptions in Tools > Options > Content: Load Images > Exceptions
* Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images)
There are also extensions (Tools > Add-ons > Extensions) that can block images.
* [[Troubleshooting extensions and themes]]

One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

Wow, have seen Files do that, but a whole Folder as I recall!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Viewing Excel Files using Tomcat - Problem with caching

Hi all,
A small part of an application I'm writing has links to Excel files for users to view/download. I'm currently using Tomcat v5 as the web/app server and have some very simple code (an example is shown below) which calls the excel file.
<%@ page contentType = "application/vnd.ms-excel" %>
<%
response.setHeader("Pragma", "no-cache");
response.setHeader("Cache-Control", "no-cache");
response.setDateHeader("Expires", 0);
response.sendRedirect("file1.xls");
%>
This all works except but I'm having one big problem.
The xls file (file1.xls) is updated via a share on the server so each month, the xls file is overwritten with the same name but with different contents. I'm finding that when an update is made to the xls file and the user then attempts to view the new file in the browser they recieve only the old xls file. It's caching the xls file and I don't want it to. How can I fix this so that it automatically gives the user the new updated file.
The only way I've managed to get Tomcat to do this is to delete the work directory and delete the file from my IE temp folder and then restart Tomcat - this is a bit much!
Any help would be greatly appreciated.
Thanks.

I'd a problem with caching a few years back, for a servlet request which returned an SVG file.
As a workaround, I ended up putting appending "#" and a timestamp / random number after it. The browser assuming each request was new, and didn't use the cache.
Eg.
http://myserver/returnSVG.do#1234567
where 1234567 is a timestamp / random.
Not sure whether you can do this on a file based URL... but maybe worth a shot...
regards,
Owen

How to import .mov files that wont play in QT (but play with vlc player)

I have a batch of .mov files of which QT only plays the audio (video is blank) - same thing when I try to open in Final Cut Express HD. I am able to open these with VLC player. How do I convert these files so that I can edit them in FCE? I am suspecting maybe these are HD files and the problem is related to that.

cthoxie wrote:
.. interesting to learn a drawback of FCE to FCP, one not mentioned to me by the Apple sales associate ..
perhaps, it was 'too self-evident' for the sales-person, that FCE is meant for camcorder-imports with a few consumer formats only, DV (as from miniDV), HDV, AVCHD (=last two get converted automatically to AIC) - done.
.. in my main area, iMovie, we permanently read, how people are surprised, that those editors are made _by concept_ as camcorder-editors, not 'file-editors' .. Apple/mov='editable by Apple/FCE' is a fallacy ..

When i try submitting my RSS feed for a podcast itunes says we are experiencing technical difficulties...... why is this and when will it be fixed?

when i try submitting my RSS feed for a podcast itunes says we are experiencing technical difficulties...... why is this and when will it be fixed?

Well, I can't see any problem with the feed, and the episode media file is correctly referenced and plays. Incidentally you do have a 'copyright' tag - it says 'Wippenberg'.
When a podcast feed is rejected, corrected and resubmitted there is a minor bug in the Store which causes you to be told that the podcast has already been submitted (which is true but irrelevant - it's really meant to prevent duplicates). To get round this you need to make a small change to the title - for example you could add a hyphen and space before 'Podcast'. You can always change it back once it's been accepted.
The other issue might be the content. The reason given for rejection tends to be technical issues, whatever the actual reason is. I haven't listened to your podcast, so I can't comment directly. Possible reasons for rejection are unacceptable content, sexual content or strong language when the 'explicit' tag is not said to 'yes', and copyright infringement: a lot of people fall over this one by including 'mixes' or indeed full plays of commercially issued recordings without having written permission from the copyright owners or alternatively a valid Podcast Licence (not available in all countries, possibly only the USA). I have no idea whether this might be an issue with yours.

: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

Hi   .
    I was creating the pass the values t in temp tables though s sis package vs2012 .
  First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
   exec USP_GETMP02333
   go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one   executive sql
In 2<sup>nd</sup> excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2<sup>nd</sup> excutive ql task .
Iam getting this type of errors,
                [Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help me

Arthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon.

Using a IP191 monitor, have random horizontal streaks on display - have no problem with other browsers; also no problem with FF on other family PC's

Using a IP191 monitor, have random horizontal streaks on display - have no problem with other browsers; also no problem with FF on other family PC's.
These "streaks" appear to be area of too high frequency scanning; they can be cleared by scrolling up and/or down.

hello, maybe that's an issue with hardware acceleration - please try [[Upgrade your graphics drivers to use hardware acceleration and WebGL|updating your graphics driver]], or in case this doesn't solve the issue or there is no new version available at the moment, disable hardware acceleration in the firefox ''menu [[Image:New Fx Menu]] > options > advanced > general''.

When I turn my Ipad3 on I get a message that states IPad is disabled.. connect to ITunes. I have done this and nothing happens. What else might I try?

When I turn my Ipad3 on I get a message that states IPad is disabled.. connect to ITunes. I have done this and nothing happens. What else might I try?

Force iPad into Recovery Mode
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times.

FaceTime won't accept the password which I wrote down some time ago and doesn't provide a "forgot your password" option. And when I try to create a new account it tells me that my email is already registered. What can I do to revise my password?

FaceTime won't accept the password which I wrote down some time ago and doesn't provide a "forgot your password" option. And when I try to create a new account it tells me that my email is already registered. What can I do to revise my password?

Hello Sheila,
Thank you for the details of the issue you are experiencing with FaceTime. It sounds like your Apple ID password is not being recognized.
You can reset your password using the steps in the following article:
Apple ID: If you forget your password
http://support.apple.com/kb/HT5787
You can contact the Account Security team if you are unable to reset your password using those steps:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT4848 Hi my name is Hajk and i got a friend that has a problem with her macbook, she gets a blue screen and cant log on. So i told her if she had an reinstall disk so that i could reinstall for her but she didn't get one with the macbook. what can she do

Hi my name is Hajk and i got a friend that has a problem with her macbook, she gets a blue screen and cant log on. So i told her if she had an reinstall disk so that i could reinstall for her but she didn't get one with the macbook. what can she do ?

If this is a fairly new Mac running either v10.7 Lion or v10.8 Mountain Lion she can use Lion or Mountain Recovery to repair the startup disk or reinstall OS X.

I am in a group chat with like 7 other people who all have smartphones. 6 of the people have iPhones, but the other person has android. I'm wondering if the iMessage works for the other 6, and my text count is only being accounted for by the android.

I am in a group chat with like 7 other people who all have smartphones. 6 of the people have iPhones, but the other person has android. I'm wondering if the iMessage works for the other 6, and my text count is only being accounted for by the android user. I have a monthly limit of 1000 text so I dont want to go over my plan by being in this group if the iMessage doesnt work because of that one android user.

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

How to set a keyboard shortcut for open with VLC player

Hey everyone!
I have reffered the earlier discussion upon creating a shortcut for the open with function and the below is the correct answer for it by using applescript editor submitted by Barney. However, I couldn't get past the 1st paragraph. It all just went over my head. Especially the "open (thefilelist) " part. Which filelist is being referred to here? All I want is a shortcut for opening files with .avi, .mpeg, and .3gp exts. with VLC player. Please help me out by providing the exact stuff I need to paste in the applescript.
Thanks
Ok, this one works both on the finder selection and as a droplet:
property htmlList : {"htm", "html"}
property htmleditor : "TextWrangler"
property textList : {"txt", "text"}
property texteditor : "TextEdit"
--property myappextlist: {"ext1","ext2","ext3"}
-- property myappsname: "myAppName" on run
tell application "Finder"
set the fileList to the selection
repeat with aFile in fileList
set theFile to aFile as string
my myOpen(theFile)
end repeat
end tell
end run on open (thefileList)
repeat with i from 1 to number of items in thefileList
set this_item to item i of thefileList
my myOpen(this_item)
end repeat
end open on myOpen(aFileAlias)
set theItemInfo to info for (alias aFileAlias)
if not folder of theItemInfo then
set theExtension to name extension of theItemInfo
if theExtension is in htmlList then
tell application htmleditor
open aFileAlias
activate
end tell
end if
if theExtension is in textList then
tell application texteditor
open aFileAlias
activate
end tell
end if
-- if theExtension is in myappextlist then
-- tell application myAppName
-- open this_item
-- activate
-- end tell
-- end if
end if end myOpen

Luds.R wrote:
I have reffered the earlier discussion
I have the feeling of dropping in in the middle of the conversation.
Anyway, try this
--script begins
property myVLC : "/Applications/VLC/VLC.app"
property myTypes : {"avi", "mpeg", "mpg", "3gp"}
on run
          my vlcTest(myVLC)
          tell application "Finder" to set fileList to selection
          my vlcOpen(fileList)
end run
on open fileList
          my vlcTest(myVLC)
          my vlcOpen(fileList)
end open
on vlcTest(myVLC)
          try
POSIX file myVLC as alias
          on error
                    display dialog "Sorry, could not locate VLC. Please add the correct POSIX path to the script." buttons {"Cancel"} default button 1
          end try
end vlcTest
on vlcOpen(fileList)
          tell application "Finder"
                    repeat with i in fileList
                              if name extension of i is in myTypes then open i using (POSIX file myVLC)
                    end repeat
          end tell
end vlcOpen
--script ends

Problem with iTunes. I have Windows 8 on a new laptop. Installed latest version of iTunes. Can play music in My Library but when I click on Itunes Store I get the message "iTunes has stopped working. A problem caused the program to stop working correctly.

I have a new laptop with Windows 8 as operating system. Installed latest version of iTunes ontop computer. I can play music in My Library but when I click on iTunes, I get the message " iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is available."
Anyone know what is the cause and if there is a resolution? Have tried to re-installing iTunes and have also tried restoring laptop to an earlier date.

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

X-Fi DD-DTS doesn't seem to work right playing DVD Movies with VLC Player or anything els

I have an X-Fi Platinum with the bay and When I try to Play a DVD with VLC Player And choose a/52 over s/pdif it sounds HORRID skipping and pausing and not functioning at all.. I must choose 5. channel to have Listenable Audio. The Same goes for AC3 Encoded Files If I chose A/52 over S/PDIF in VLC player it sounds like **bleep** and doesn't seem to decode it right. I must chose stereo 2 channel to listen to AC3 encoded video's.. NOTE The dolby Digital symbol DOES appear when i chose A/52 over S/PDIF so it does know it's a digital signal.. And I have the software set to USE hardware decoder and S/PDIF in Decode selected. NOW Here's something that REALLY makes me wonder wtf is wrong, I can connect my Home DVD Player or Cable Box over the Optical?in OR the S/PDIF in and the SOB works Fine, The Dolby Digital symbol comes up and everything sounds great! I get Dolby Digital surround no problem..Why in the heck does it not want to play DVD's using the A/52 over S/PDIF or any AC3 Encoded Files?What's the deal?And I am using windows XP Pro SP2 yadda yadda yadda?Message Edited by mbrown0420 on 07-25-20070:58 PM
Message Edited by mbrown0420 on 07-25-20070:58 PM

Only with VLC?
Same problem with PowerDVD, WinDVD?
VLC media player Forum:
http://forum.videolan.org/viewforum.php?f=4
Unplayable DTS/Dolby Output via A/52 over S/PDIF (Videolan forum)
http://forum.videolan.org/viewtopic....d=a&view=print
"In the preferences menu: (tab) Audio > Output modules > (check the "advanced options" box) choose "Win32 waveOut extension output" from the drop-list, save and restart VLC (by CloudStalker)"
http://lh3.google.es/rmorinr/Rqhsqp7cvhI/AAAAAAAAAfM/qtzo3E8-sQQ/s44/VLC_DTS_Options.JPG">
Message Edited by Rad-Wulf on 07-26-20070:47 AM

Error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT

Similar Messages

Maybe you are looking for