Error 5007: an actionscript file must have...

Hi all, I am new to AS3 and just ran in to this problem.
I am trying to have actionscript 3 and greensocks tweenlite change the alpha properties of another file on roll over.
I can do it using just pure actionscript 3; however when I try to use Tweenlite I run in to this error:
5007: An ActionScript file must have at least one externally visible definition
The code I have used is:
image = mc that has the rollover function added to it;
info = mc that has it's alpha set to 0 and I am trying to get it to tween to 1 in 0.5 seconds.
import com.greensock.*;
import com.greensock.easing.*;
image.addEventListener(MouseEvent.MOUSE_OVER, over);
image.addEventListener(MouseEvent.MOUSE_OUT, out);
function over(event:MouseEvent):void{
TweenLite.to(info, 0.5, {alpha:1});
function out(event:MouseEvent):void{
TweenLite.to(info, 0.5, {alpha:0});
What am I doing wrong?
Thanks in advanced!

Thanks Kglad =)
This advice is true. 
I read about it on another forum but your advice would have helped me too 

Similar Messages

  • 5007 an actionscript file must have at least one externally visible definition

    Hi,
    I am quite new to Adobe Flash professional, and I am trying to edit a FLA file.
    after edition I try to publish it to the same directory, and I just published it swf as I dont need the html file.
    it keeps showing the above error and when I play my published new swf it keeps blinking!
    does anyone know what is the problem?
    Thanks

    At the minimum, .as file should have below code to publish as document class.
    package
                    import flash.display.MovieClip;
                    public class ClassName extends MovieClip
                                    public function ClassName()
                                                    // constructor code

  • Forte compile error java source files must have a .java suffix

    Hello Guru's,
    I am using Forte for Java release 2.0 build 1160, and Java SDK 1.3.1.
    When I try to compile a project in Forte I get the following error :
    "fastjavac: java source files must have a .java suffix C:\Program"
    I have looked at the source files and they do hav .java suffix!
    If this is not the correct form can someone point me in the right direction. If this is a correct forum then help is very much appreciated.
    Cheers...Harki

    Hi,
    Try to compile like this:
    javac yourfile.java
    Hope this helps you.
    Cheers.....Dinesh

  • Bursting Error : ZIP file must have at least one entry

    Hai All,
    I am trying to Burst report in 11.5.10.2 instance. When tried bursting it the it got the following error.
    XML Publisher: Version : 11.5.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    XDOBURSTREP module: XML Publisher Report Bursting Program
    Current system time is 04-JUN-2009 12:40:16
    XML/BI Publisher Version : 5.6.3
    Request ID: 387463
    All Parameters: ReportRequestID=387460:DebugFlag=Y
    Report Req ID: 387460
    Debug Flag: Y
    Updating request description
    Updated description
    Retrieving XML request information
    Node Name:ERP
    Preparing parameters
    null output =/d02/appluat/uatcomn/admin/out/UAT_erp/o387463.out
    inputfilename =/d02/appluat/uatcomn/admin/out/UAT_erp/o387460.out
    Data XML File:/d02/appluat/uatcomn/admin/out/UAT_erp/o387460.out
    Set Bursting parameters..
    Temp. Directory:/tmp
    [060409_124018651][][STATEMENT] Oracle XML Parser version ::: Oracle XDK Java 9.0.4.0.0 Production
    [060409_124018653][][STATEMENT] setOAProperties called..
    Bursting propertes.....
    {user-variable:cp:territory=US, user-variable:cp:ReportRequestID=387460, user-variable:cp:language=en, user-variable:cp:responsibility=50352, user-variable.OA_MEDIA=http://erp.adgs.ae:8030/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=387460, user-variable:cp:locale=en-US, user-variable:cp:user=GVU, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=387463, user-variable:cp:org_id=103, user-variable:cp:reportdescription=Pension Fund}
    Start bursting process..
    Bursting process complete..
    Generating Bursting Status Report..
    --Exception
    ZIP file must have at least one entry
    java.util.zip.ZipException: ZIP file must have at least one entry
         at java.util.zip.ZipOutputStream.finish(ZipOutputStream.java:292)
         at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.zipOutputFiles(JCP4XDOBurstingEngine.java:534)
         at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:292)
         at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
    Can anyone please help me on this..
    Regards

    Pl help me is there any way to overcome this error, when supplier email address is present then , bursting file works fine, if supplier address is null , then it is giving me error , please find the error also.........
    Bursting XML File ...........
    <?xml version="1.0" encoding="UTF-8"?>
    <xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
    <xapi:request select="/XXDBD_POPRPOP_SA/LIST_G_INIT_INFO/G_INIT_INFO/LIST_G_HEADERS/G_HEADERS">
    <xapi:delivery>
    <xapi:email server="mailgate.XXX.com" port="25" from="[email protected]">
    <xapi:message id="emailpo" to="${CP_VENDOR_EMAIL}" cc="[email protected],[email protected]" attachment="true"
    subject="Purchase Order No: ${POH_PO_NUM}">
    Please find attached PO ${POH_PO_NUM}.
    Regards,
    </xapi:message>
    </xapi:email>
    </xapi:delivery>
    <xapi:document output="Purchase Order ${POH_PO_NUM}" output-type="pdf" delivery="emailpo">
    <xapi:template type="rtf" location="xdo://XXDBDPO.XXDBD_POXPRPOP_SA1.en.US/?getSource=true" filter=".//G_HEADERS[CP_VENDOR_EMAIL !='']"></xapi:template>
    </xapi:document>
    </xapi:request>
    </xapi:requestset>
    ERROR Generated from bursting file ............Pl help me...........its urgent .............
    XML/BI Publisher Version : 5.6.3
    Updating request description
    Retrieving XML request information
    Preparing parameters
    Set Bursting parameters..
    Bursting propertes.....
    {user-variable:cp:territory=US, user-variable:cp:ReportRequestID=529232, user-variable:cp:language=en, user-variable:cp:responsibility=20707, user-variable.OA_MEDIA=http://usncx054.XXX.com:8015/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=N, user-variable:cp:parent_request_id=529232, user-variable:cp:locale=en-US, user-variable:cp:user=RAJULAT, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=529233, user-variable:cp:org_id=84, user-variable:cp:reportdescription=DBD Printed Purchase Order Report English, user-variable:cp:Dummy for Data Security=Y}
    Start bursting process..
    Bursting process complete..
    Generating Bursting Status Report..
    --Exception
    ZIP file must have at least one entry
    java.util.zip.ZipException: ZIP file must have at least one entry
    at java.util.zip.ZipOutputStream.finish(ZipOutputStream.java:304)
    at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.zipOutputFiles(JCP4XDOBurstingEngine.java:534)
    at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:292)
    at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
    Thanks

  • [solved] "Error - all files must have permissions of 644 or 755"

    Hello,
    when I try to update an AUR package, I get the error message:
    Error - all files must have permissions of 644 or 755.
    How can I find out which file in the tree is causing that problem?
    And what is the cleanest way to change that? Change permissions via chmod in the pkg dir?
    Last edited by Carl Karl (2015-04-02 07:55:56)

    A right there! (I thought INSIDE the phg...) Thanks, solved.
    Last edited by Carl Karl (2015-04-02 07:55:31)

  • Erro in bursting ZIP file must have at least one entry

    Hi All ,
    i am using bursting utility for xmlp report ,but getting the following error
    --Exception
    ZIP file must have at least one entry
    java.util.zip.ZipException: ZIP file must have at least one entry
         at java.util.zip.ZipOutputStream.finish(ZipOutputStream.java:304)
         at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.zipOutputFiles(JCP4XDOBurstingEngine.java:534)
         at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:292)
         at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
    i have no clue y this error is coming ,any hint would be very helpful,
    Thanks in advance
    thanks
    Pratap

    Hi All
    i got resolved this error (Erro in bursting ZIP file must have at least one entry) ,was doing very silly mistake i was using the template name instead of Data Definition code name in location string
    location= ' '
    so the ZIP file error is removed ,now getting one more error after this ,which i am not able to under stand
    --Exception
    /tmp/011211_023243126/xdo1_164902_2.pdf (No such file or directory)
    java.io.FileNotFoundException: /tmp/011211_023243126/xdo1_164902_2.pdf (No such file or directory)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(FileInputStream.java:106)
         at java.io.FileInputStream.<init>(FileInputStream.java:66)
         at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.zipOutputFiles(JCP4XDOBurstingEngine.java:532)
         at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:299)
         at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
    Please help me on this
    Thanks
    Pratap

  • ZipException: ZIP file must have at least one entry

    When I place a security constraint on jar files in a Tomcat server to prevent unauthenticated access to the jar files
    <security-constraint>
    <display-name>Security Constraint</display-name>
    <web-resource-collection>
    <web-resource-name>ee</web-resource-name>
    <url-pattern>*.jnlp</url-pattern>
    <url-pattern>*.jar</url-pattern>
    </web-resource-collection>
    our jnlp applications can no longer download the needed jar resources and I get the following exception. ( It works fine when I take jar files out of the security-constraint list.) Any suggestions on why this is happening and how to get this to work?
    Thanks.
    java.util.zip.ZipException: ZIP file must have at least one entry
         at java.util.zip.ZipOutputStream.finish(Unknown Source)
         at java.util.zip.DeflaterOutputStream.close(Unknown Source)
         at java.util.zip.ZipOutputStream.close(Unknown Source)
         at com.sun.deploy.net.HttpDownloadHelper.download(Unknown Source)
         at com.sun.deploy.cache.Cache.downloadResourceToTempFile(Unknown Source)
         at com.sun.deploy.cache.Cache.downloadResourceToCache(Unknown Source)
         at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
         at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
         at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
         at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
         at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
         at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
         at com.sun.javaws.LaunchDownload$DownloadTask.call(Unknown Source)
         at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
         at java.util.concurrent.FutureTask.run(Unknown Source)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)

    What am i missing here???
    ZipOutputStream zos = new ZipOutputStream(new FileOutputStream("out.zip"));
    void goDir(String dirName) {
    File dirObj = new File(dirName);
    if (dirObj.exists() == true) {
    if (dirObj.isDirectory() == true) {
    // create an array of File objects
    File[] fileList = dirObj.listFiles();
    for (int i = 0; i < fileList.length; i++) {
    if (fileList.isDirectory()) {
    goDir(fileList[i].getPath());
    else if (fileList[i].isFile()) {
    goZip(fileList[i].getPath());
    } // loop
    else {
    else {
    void goZip(String filePath) {
    try {
    FileInputStream fis = new FileInputStream(filePath);
    BufferedInputStream bis = new BufferedInputStream(fis);
    ZipEntry fileEntry = new ZipEntry(filePath);
    zos.putNextEntry(fileEntry);
    byte[] buff = new byte[1024];
    int len;
    while ( (len = bis.read(buff)) > 0) {
    zos.write(buff, 0, len);
    zos.closeEntry();
    bis.close();
    catch (java.io.IOException ioe) {
    ioe.printStackTrace()

  • RA Tcode KKA2 error KJ436 (Basic RA version must have valuation category )

    Hello,
    We are having an issue with Results Analysis and would appreciate some help. We are getting the error message shown below when running Tcode KKA2.
    We are using CO plan version 0 and it is set for actual and plan. The RA version (0) is marked as being relevant to settlement. These settings seems to address the error message but I guess we are missing something.
    Any help would be greatly appreciated.
    Thanks
    Joe Hailstone
    ERROR MESSAGE:
    Basic RA version must have valuation category "0" (operational valuation)
    Message no. KJ436
    Diagnosis
    If a version has actual data (see basic version setting), it must be relevant to settlement in results analysis (see maintenance of version of results analysis).
    If a version does not have actual data (see basic version setting), it cannot be relevant to settlement in results analysis (see maintenance of the version of results analysis).
    Procedure
    1. Check the basic version setting in the maintenance of the general versions.
    2. Modify the results analysis version to conform to the basic version setting.
    3. Turn the indicator Version relevant to settlement on or off, whichever is appropriate.

    Dear
    i am not received any input .
    Regards
    SAPFICO

  • Video file must have resulotion of...

    hi
    I have a PAL project and im trying to import a footage that has a diffarent resulotion a small quicktime movie..
    why cant I import the file at all?
    Asaf

    ok..
    i have a PAL project
    and i want to bring into this project a QT move in a resulotion of 360x240 (or simillar quick time movie diffarent res.)
    and getting the error :
    "could not import file Test.move.
    Video files for this project must have a resulotion of 720x576 or 704x576"
    cant i bring/import other file sizes?
    thnks!

  • Error using SOAPRunner:  XML document must have top level element

    Hi all,...................xMII 11.5.3 b66
    I am attempting to consume a BLS transaction as a web service from a J2EE app. 
    When I test it with http://naholldo31020/Lighthammer/SOAPRunner/Amy/GetListOfPlants I am getting an error message from the browser.  The BLS transaction works fine when called from a Query template.  What am I missing?
    The XML page cannot be displayed
    Cannot view XML input using style sheet.
    Please correct the error and then click the Refresh button, or try again later.
    XML document must have a top level element. Error processing
    resource 'http://naholldo31020/Lighthammer/SOAPRunner/Amy/GetL...
    WSDL from WSDLGen...
    <?xml version="1.0" encoding="UTF-8" ?>
    - <definitions xmlns="http://schemas.xmlsoap.org/wsdl/"
    xmlns:http="http://schemas.xmlsoap.org/wsdl/http/"
    xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
    xmlns:s="http://www.w3.org/2001/XMLSchema"
    xmlns:s0="http://www.sap.com/xMII"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
    xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" targetNamespace="http://www.sap.com/xMII">
    - <!--  Types
      -->
    - <types>
    - <s:schema elementFormDefault="qualified" targetNamespace="http://www.sap.com/xMII">
    - <s:complexType name="InputParams">
    - <s:sequence id="InputSequence">
      <s:element maxOccurs="1" minOccurs="0" name="RequestXML" type="s:Xml" />
      <s:element maxOccurs="1" minOccurs="0" name="RowCount" type="s:long" />
      <s:element maxOccurs="1" minOccurs="0" name="RowSkips" type="s:long" />
      <s:element maxOccurs="1" minOccurs="0" name="Table" type="s:string" />
      </s:sequence>
      </s:complexType>
    - <s:element name="XacuteRequest">
    - <s:complexType>
    - <s:sequence>
      <s:element maxOccurs="1" minOccurs="0" name="LoginName" type="s:string" />
      <s:element maxOccurs="1" minOccurs="0" name="LoginPassword" type="s:string" />
      <s:element maxOccurs="1" minOccurs="0" name="InputParams" type="s0:InputParams" />
      </s:sequence>
      </s:complexType>
      </s:element>
    - <s:complexType name="Rowset">
    - <s:sequence>
      <s:element maxOccurs="unbounded" minOccurs="0" name="Row" type="s0:Row" />
      </s:sequence>
      <s:attribute name="Message" type="s:string" />
      </s:complexType>
    - <s:complexType name="Row">
    - <s:sequence id="RowSequence">
      <s:element maxOccurs="1" minOccurs="1" name="ErrorMessage" type="s:string" />
      <s:element maxOccurs="1" minOccurs="1" name="OutputXML" type="s:string" />
      </s:sequence>
      </s:complexType>
    - <s:element name="XacuteResponse">
    - <s:complexType>
    - <s:sequence>
      <s:element maxOccurs="1" minOccurs="0" name="Rowset" type="s0:Rowset" />
      </s:sequence>
      </s:complexType>
      </s:element>
      </s:schema>
      </types>
    - <!--  Messages
      -->
    - <message name="XacuteSoapIn">
      <part element="s0:XacuteRequest" name="parameters" />
      </message>
    - <message name="XacuteSoapOut">
      <part element="s0:XacuteResponse" name="parameters" />
      </message>
    - <!--  Ports
      -->
    - <portType name="XacuteWSSoap">
    - <operation name="Xacute">
      <input message="s0:XacuteSoapIn" />
      <output message="s0:XacuteSoapOut" />
      </operation>
      </portType>
    - <!--  Bindings
      -->
    - <binding name="XacuteWSSoap" type="s0:XacuteWSSoap">
      <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
    - <operation name="Xacute">
      <soap:operation soapAction="http://www.sap.com/xMII" style="document" />
    - <input>
      <soap:body use="literal" />
      </input>
    - <output>
      <soap:body use="literal" />
      </output>
      </operation>
      </binding>
    - <!--  Service mapping
      -->
    - <service name="XacuteWS">
    - <port binding="s0:XacuteWSSoap" name="XacuteWSSoap">
      <soap:address location="http://naholldo31020/Lighthammer/SOAPRunner/Amy/GetListOfPlants" />
      </port>
      </service>
      </definitions>

    Hi Amy,
    here is an example how you can call a WS via http GET:
    http://<server>/Lighthammer/Runner?Transaction=<path_to_your_TRX>&XacuteLoginName=YourAccount&XacuteLoginPassword=yoursecret&outputparameter=*
    Please note you do not need to use credentials in case you calling localhost.
    I think in your case this should be the right url:
    http://naholldo31020/Lighthammer/Runner?Transaction=Amy/GetListOfPlants&XacuteLoginName=YourAccount&XacuteLoginPassword=yoursecret&outputparameter=*
    Please change parameters for
    - XacuteLoginName
    - XacuteLoginPassword
    - outputparameter (you can specify * or one of your transaction output parameter)

  • Error parsing! Element "process" must have no character [children],

    hi,
    Please does any1 know how to fix this error ?
    when deploying the poroject i got :
    XML parsing failed because Element "process" must have no character [children], because the types content type is element-only......"
    when double clicking on the above error, Jdevelopper takes me to the end of the process that is closed normally with the BPEL element </process>
    Sorry i guess i'm flodding the Forum with my msgs, but am a beginner in the OraBPELPM.
    Thanks,
    Rana

    Sorry Ng for the delay,
    Below is the simple .bpel cod eam trying to test:
    "<process name="BpelDemoExample"
    targetNamespace="http://xmlns.oracle.com/BpelDemoExample"
    xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
    xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
    xmlns:IssuesWorkGroup="http://xmlns.oracle.com/BpelDemoExample"
    xmlns:client="http://xmlns.oracle.com/BpelDemoExample">
    -->
    <partnerLinks>
    <partnerLink name="IssuesWorkGroup" partnerLinkType="IssuesWorkGroupBPELDemoE" partnerRole="BpelDemoExampleProvider"/>
    <partnerLink name="client" partnerLinkType="clientBPELDemoE" partnerRole="BpelDemoExampleRequester"/>
    </partnerLinks>
    <variables>
    <variable name="AnnouceIssues_ProcessData" messageType="AnnouceIssues_ProcessDataMessage"/>
    <variable name="outputVariable" messageType="BpelDemoExampleResponseMessage"/>
    <variable name="Issueslistready" messageType="BpelDemoExampleRequestMessage"/>
    </variables>
    <sequence name="main" >
    <receive partnerLink="IssuesWorkGroup" portType="processPort" operation="AnnouceIssues" variable="Issueslistready" createInstance="yes"/>
    <wait name="HoldSixDays" for="6 days" until="38698"/>
    <switch name="ReceivedEmail">
    <case condition="Yes">
    <sequence>
    <invoke partnerLink="internal" name="CheckAgain" portType="processPort" operation="CheckAgain" inputVariable="outputVariable"/>
    <empty/>
    </sequence>
    </case>
    <otherwise>
    <sequence>
    <invoke partnerLink="client" name="PublishTheList" portType="processPort" operation="PublishTheList" inputVariable="outputVariable"/>
    <empty/>
    </sequence>
    </otherwise>
    </switch><!-- The detailed Mapping of all subProcesses -->
    </sequence >
    </process>
    Thanks
    Rana

  • "the importer reported a generic error" on a psd file i have been using all day.

    have been editing all day on a 3 minute video for a client, then all of a sudden, a PSD file with several layers for my graphics went off line... nothing else.. just the psd file.
    tried to ReLink but all I get is this
    "the importer reported a generic error"
    I have tried resaving the project as something else and still it wont relink.

    Resave psd file in Photoshop to another name and re-import.
    Replace the psd on the timeline.
    See if that will work.

  • Download Error - "all downloads and file copies have been paused."

    Can't download an episode of Mad Men - should have plenty of space. Keep getting this error message. Emptied Recycle Bin - no help.

    Start -> Computer -> C: drive, right click - Properties.
    How much free space do you have?
    You shold generally have 10%-15% free space on your boot )C:) drive.
    If not, you need to clear some space by deleting them/ moving them to other drives.

  • Book designer wanted to set up file InDesign CC file, must have experience with Chinese fonts (traditional

    Hi there
    Looking for a book designer to help with setting up a file in InDesign CC so I can place text from Word.
    I'm helping to produce a large book (700+ B5 pages) about history of Chinese medicine in 20th century.  There are lots of characters used throughout (within English-language paragraphs) so it's really important that the designer has experience working with fonts for both traditional and simplified characters.
    The book has been laid out in Word with style sheets to basic mockup stage and can be provided for reference so there's no design concept needed, simply getting the shell ready to place the Word files, but this would probably include things like:
    Document setup, page size, margins etc
    Verifying the style sheets are set up properly & add extras if needed eg optical margins etc, that aren't included in Word
    Structuring files as chapters, front matter, back matter, headers & footers etc
    Suggesting a layout grid based on word file
    Maybe a final check of the finished file before producing the PDF
    This is a self-published project for a very small market!!!  So of course we're looking to economise :-)  So if you're interested then please provide a quote based on your experience of what's needed to set up a project properly but not with too many bells & whistles!!
    Cheers
    Lois

    Anyone interested in the opportunity should contact Lois through the messaging system. I'm locking the thread.

  • AS3.0 error:5007

    5007: An ActionScript file must have at least one externally
    visible definition.
    Alright I have a .fla with 1 symbol
    Symbol linked to a FOUND .as file
    asfile:
    import flash.display.*;
    class aMoveTest extends MovieClip {
    public function aMoveTest() {
    So that looks PRETTY define to me
    Anything Im missing?

    that code is ok as long as it's named aMoveTest.as

Maybe you are looking for

  • Opening aperture 2.1.3 shuts down computer

    When opening Aperture 2.1.3 it suddenly shuts down the computer once it has fully started up, a problem I have never encountered before. Any suggestions to what may have happened and how to get it fixed? Cheers

  • What can I do if my ipod was stolen?

    My ipod was stolen about a week ago and i dont have icloud compelety set up on it.

  • Uninstall Adobe 7.0 Standard

    I don't have the exact version of 7.0 but I'm unable to uininstall it. It gives me an error message in the middle of it about some temporary folder it can't create and I can only select ok and then it backs out of the whole process. Now I can't open

  • Download assistant won't launch

    Download assistant won't launch, are there any solutions?

  • Refreshing records in jsp uix jdev9i

    I have a project where when you first bring up my customer.jsp it diplays the first 4 records and lets me pick other records in groups of 4. If I do a specific search and bring up one customer and then move to other jsp pages to get the phone info, e