Error -603 (could not install extension) notification keeps popping up when I sign into CC even though I've installed the extension trough Extension Manager

Hi like my question says above, purchased an extension and installed it manually because it would not install automatically (error -603) but now I keep getting the same message/notification every time that I log into CC when starting the computer or if I log in manually after having logged out
Any help would be highly appreciated
Richard

Hi,
Would you let us know which add-on show 603 error. Can you find this add-on from https://creative.adobe.com/addons/my_addons (even it is a free add-on)?
And we need following informations:
* Your device (windows or Mac)
* How did you use Extension Manager to install that add-on? Where do you get the zxp file? Did you install that add-on from Adobe Exchange Panel?
1. Create a file called exmancoreliblog.yes and copy it to
Mac: /Users/<name>/Library/Application Support/Adobe/Extension Manager CC/Log/
Windows: C:\Users\<name>\AppData\Roaming\Adobe\Extension Manager CC\Log
2. Restart Extension Manager and reproduce your issue
3. Send us ExManCoreLibrary.log file in that log folder to [email protected]

Similar Messages

I want to eliminate an autofill choice that pops up when I sign into yahoo using the Firefox browser. I tried yahoo help which said hover over the unwanted line and press delete, but that did not work. I am using a Mac if that makes a difference.

Question
I want to eliminate an autofill choice that pops up when I sign into yahoo using the Firefox browser. I tried yahoo help which said hover over the unwanted line and press delete, but that did not work. Do you know how I can get rid of this autofill? I am using a Mac if that makes a difference. Thanks.

Use Shift+Delete on Mac.
*http://kb.mozillazine.org/Deleting_autocomplete_entries
*Click the (empty) input field on the web page to open the drop down list
*Highlight an entry in the drop down list
*Press the Delete key (on Mac: Shift+Delete) to remove it.

The app notification keep popping up when I am another app, how can I stop it. I downloaded it but it still pop up. It's very annoying...

The app notification keep popping up even after downloading, how can I stop it? Thanks

go to Settings > Notification Center > scroll down to the app that is causing the problem > Alert Style and touch the word None under the left-most image of an iPad. An oval will appear around the word to indicate that this is what you have selected

"An iPod has been detected but could not be identified property" keeps showing up when I plug in my 6th generation nano for the mac. I ran the power down to nothing so nothing shows up on the screen. I've downloaded the latest iTunes.

Holding down the lower volume and sleep buttons at least launches iTunes (I have the latest version) and I get a "Waiting for iPod" message and a progress bar which doesn't show any progress, and then after about a minute I get the unknown error message.

Hi LJ Zinkand,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like iTunes gives an error about the iPod. I would recommend that you read this article, it may be able to help the issue.
iPod nano: Error message saying that iPod could not be identified properly - Apple Support
Cheers,
Mario

Keeps opening Firefox Setup 3.6.8.exe even though it's installed, what do I do to prevent this?

When I'm using the internet the firefox setup 3.6.8.exe keeps popping up asking me if I want to save the file. I tried installing it and it just installed Firefox again, afterwards when I opened up firefox it asked me if I wanted to save the file or not again.

You're welcome

Wifi notification keeps popping up when returning from sleep

Whenever my mac mini (2012) or MBP (2007) returns from sleep I get popups of restoring wfif access. Sometimes these keep returning every minute or so, with 5 notifcations at the same time.
Does someone else experience this as well? And what is the remedy.
I do not want to restart every time I wake m macs from sleep. BTW, this was never an issue before an update on 10.7 (previous instance of 10.7) was fine. Also, do not want to migrate to 10.8 yet. as my MBP cannot.
Current OS X: 10.7.5
Cheers!

Ok, I just tried that. I deleted com.apple.KeyboardViewerServer.plist. I then started my screensaver. When I came back in...the Keyboard Viewer was back and there was a new plist file that was created...so, something else must be controlling it.

Error 1406. could not write to value Adobe ARM to key \Software\Microsoft\Windows\CurrentVersion\Run

Had reinstalled Windows 7. Trying out Acrobat and keep getting this error: Error 1406. could not write to value Adobe ARM to key \Software\Microsoft\Windows\CurrentVersion\Run
tried a few of the discussions and haven't been able to fix it

Hi richardt4827,
Please let me know if you have tried out the solutions given in this KB doc link:
Error 1402 | Error 1406 | Acrobat, Reader
Hope to hear from you.
Regards,
Anubha

HT1386 I keep geeting a 'connection could not be established to this iPhone' message when trying to sync.

I keep getting a 'connection could not be established with this iPhone' message when I try to sync, even thos I can see my iPhone 5 in iTunes & have tested the link by manually transferring songs from iTunes to the iPhone. Can anyone help?

I am also getting this error with two iPad 2s and an iPhone 5. All are on iOS 6.0.1 and this is with iTunes 11 on a Windows 7 PC. I also have an iPhone 4 that does not seem to have an issue that I can tell. When I plug in the iPhone 5 and one of the iPads, it will start to to sync and right at the end I get that message. It will, however, still continue to sync the device after the error message pops up. With the one iPad, which is rarely connected to computer, it will find the iPad via wifi when iTunes is opened, but I will get that message when it is performing its initial sync.
While I kept having sync issues when using iTunes 10.7, this is a new issue for me. I was also getting a lot of warnings that the iPhone or iPad could not be synced because the connection was lost even though the iPad and iPhone were connected via USB cable. In those cases, the sync would just abort. I have not gotten that error though in two days. At the time to resolve that issue, I needed to disconnect the USB cable, reset the iPhone/iPad, and then reconnect the USB cable.
I really wish Apple would figure out these sync issues.
- Merg

How to resolve the error "File could not open" in AL11?

Hi Friends,
When I am going to write a file via DATASET.
But it's showing me a error"File Could not Found"?
And I am unable to check my fiel at AL11.
Please suggest me the solutions.
Regards
Ricky

Hi,
Try this code
TYPES : BEGIN OF ty_emp,
empno(2) TYPE c,
empid(10) TYPE c,
empname(3) TYPE c,
END OF ty_emp.
DATA : it_emp TYPE TABLE OF ty_emp,
wa_emp TYPE ty_emp.
DATA : pbk TYPE string.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : p_file TYPE rlgrap-filename default 'D:\EMP.TXT'.
PARAMETERS : p_asfile TYPE rlgrap-filename default 'EMP'.
SELECTION-SCREEN END OF BLOCK b1.
pbk = p_file.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                      = pbk
FILETYPE                      = 'ASC'
has_field_separator           = ' '
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
    TABLES
      data_tab                      = it_emp
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
OPEN DATASET p_asfile FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
LOOP AT it_emp INTO wa_emp.
    TRANSFER wa_emp TO p_asfile.
ENDLOOP.
CLOSE DATASET p_asfile.
==============================================
Regards,
Krrishna

HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
The SIM works on a different phone I tested it.
Any ideas?? TKS Sandro

“Could Not Activate EDGE” error message Update ...
Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
Thanks
Joe

Error message: "Could not open key..." trying to install iTunes 7.6.1.9

I'm trying to install iTunes and keep receiving error msg: "Could not open key: HKEYLOCALMACHINES\Software\Classes\.cdda\OpenWithProgIds. Verify that you have sufficient access to that key, or contact your support personnel."
I have tried to un-install and re-install to no avail. Please help! I have i-Tune gift cards that are rendendered worthless at this point.

Are you logged on as a Windows administrator?

Install error 1401 - Could not create key

I'm trying to install BlackBerry Desktop Software 4.5 in Windows XP. I'm installing it in my daughters WinXP user account. Durring the install process I said to make the software available only to her account, not to all users. (I run ActiveSync for my Pocket PC in my account. I don't know if there are conflicts between these programs but I didn't want to risk it.)
When the installation program said its status was "Registering class servers", the following message popped up:
Error 1401.Could not create key
HKEY_USERS\S-1-5-21-1123561945-1647877149-682003330-1009\Software\Classes. Verify that you have sufficient access to that key, or contact your support personnel.
When I clicked OK, the installation was rolled back and a message informed me that the InstallShield wizard was interrupted.
I have no idea how to verify access to that key, and I don't have any support personnel. I'm a home user and this error gives me no information about what to do.
Can anyone help?

Hi,
From the microsoft knowledgebase:
http://support.microsoft.com/kb/232143
Please let me know if this resolves your problem!
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Server 2008 Pinter install error OPERATION COULD NOT BE COMPLETED (error 0x900f0214)

I downloaded the HP Universal printer driver for a LaserJet 4250dn network printer to our server running SERVER 2008 SP2.
I dowloaded the zipped executable files for both the PCL5 and PCL6 drivers to the desktop and ran the EXE to unzip the files. When I tried to run the INSTALL.EXE file (as an ADMINISTRATOR) for BOTH drivers, the following occurs:
Answer YES to EULA
Select TRADITIONAL MODE (or DYNAMIC MODE - it doesn't matter - neither one works)
Click INSTALL
Immediately I get the error OPERATION COULD NOT BE COMPLETED (error 0x900f0214)
Click OK
Click FINISH
This happens with both the PCL5 & PCL6 driver installations.
I activated FILE SHARING, PRINTER SHARING, and NETWORK DISCOVERY but did not solve the problem.
I was logged in as the Domain Administrator and the Local Admin also.
Any suggestions?

Hi selmore,
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

I'm trying to load video file into CS6 I keep getting error message: 'Could not complete you request because the DynamicLink Media Server is not available.' No Idea what to do next. Help please.

I'm using CS6 Extended. My OS is "Windows 7 home premium.
Can no longer load video files into CS6 for edited I keep getting error message:
'Could not complete your request because the DynamicLink Media Server is not available.'
Don't know what this means. Until just now I was able to load videos without any problems. Now I'm getting this message. Any thoughts?

Hi Mylenium,
upfront:
I hope I won't be marked as spam now, since I am posting on a few relevant discussions now to this topic.
However, I really would like to ask the people who have experienced this problem to see if they were able to solve it.
Now the real deal:
I posted a question in this discussionDynamicLink Media Server won't let me import video for video frames to layers anymore.
The linked discussion is a lot younger, which is why I posted there first.
I also put in information on the steps that I have tried and my computer specifications.
I am experiencing this problem for a while now and hope you and jones1351may be able to help out.

What do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"

what do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"

It can be that you have an old version of Photoshop Elements and a new camera.
Please tell us
Which operating system you are running on
Which version of Photoshop Elements you are using
Which camera the raw images come from (Make & model)
Brian

Error -603 (could not install extension) notification keeps popping up when I sign into CC even though I've installed the extension trough Extension Manager

Similar Messages

Maybe you are looking for