Error 7, report generation toolkits do not work after building.

Hallo guys:
one problem. help!
I tried to build my programs with application builder, unluckly builded exe application does no work well as before, i checked some similar post from this forum, and added that NIReprot.llb in my project and rebuild, the problem still takes place, my program append some text, tables, and charts into a word template with that Report Generation Toolkits, but it always gives out error 7 and 'NI_Word.lvclass:new report subVI.vi -> NI_report.lvclass:New Report.vi -> Creat New Report.vi ->...'error information.
is there anyone can give me some clues about this annoying problem.
thanks a lot!!!
Solved!
Go to Solution.

When you say "attached all this library to my project", it is not clear whether you answered the question about including the dynamic VIs in your build specifications. See attached image. You will need to select the files in your project and set them to Always Included. Have you done this?
Attachments:
alwaysincluded.JPG ‏46 KB

Similar Messages

  • Report generation toolkit does not work

    Hello,
    The report generation toolkit does not work.
    It seems to point to the 'Generate Report Data Members.ctl'.
    I suppose it has something to do with the wrong set of active X-controls ?
    I work with Win 2000 and Office XP
    How can i solve this problem ?
    Thanks in advance !
    Regards
    Christine

    Hello Julien,
    Sorry for the late answer
    I become a broken arrow, when openening the example Sample Report (Excel).vi
    Searching further for the cause of the error it brings me to the sub vi tables.
    Print screens in attachment
    Regards
    Christine
    Attachments:
    error Ni Reports.doc ‏67 KB

  • The report generation toolkit didn't work after the vi was build to an application.exe

    I write a VI using LabVIEW Report Generation Toolkit , it really works in the LabVIEW7.1 and 6.0 enviroment. but after the VI was build in to an application.exe, the LabVIEW Report Generation Toolkit didn't work even the application runs.
    thanks for your help.

    You might want to follow the procedure here:
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/86256a47004e16d186256a84004cb883?OpenDocument
    (If the URL doesn't work, you can search for NI document ID: 2B87TVI8)
    Dan

  • Exe created with Report Generation toolkit does not work for all users

    I created a exicutable with the report generation toolkit and it only works with some of my users. I use microsoft 2007 and anyone that has microsoft 2007 my exe works well. Most of my users that have microsoft 2010 are able to use my program as well. However, there is one user with 2010 and Windows 2007 that cant get my program to work.
    Any suggestions for troubleshooting this?
    Thanks

    The most likely issue is due to the fact that Microsoft changes the ActiveX object model of Office for each version of Office. The Report Generation Toolkit does a pretty good job of handling this, but it is not 100% effective. Search, for example on the "Set Cell Border" function and you will see what I mean. In these cases it's up to you to handle this issue. How you handle it really depends on your situation. For us to provide a more concrete answer you will need to provide further details, such as what toolkit function is "not working" (whatever that means), and who you "users" are. Is this an internal distribution? Are you selling this program? Is this code written for a project with a specific customer?

  • MS office report function does not work after building the appication

    I use the MS office report function  with a custom excel template my application.
    It works properly in de developstate, but after building the application it does not work .
    I use office 2000  and Windows XP

    jmq wrote:
    I use the MS office report function  with a custom excel template my application.
    It works properly in de developstate, but after building the application it does not work .
    What error message if any did you get? It could be a couple things:
    1. Did you include the Report Toolkit's dynamic vis in the app's build process?
    Ref: Error 7 when Running an .EXE Using VIs from Report Generation Toolkit for MS Office
    2. How are you giving the path to you custom template, as a relative or an absolute path? The path will be different for the .exe. You have to strip twice.
    Ref: Why Can't My Executable Load My Included File When I Use Relative Path Encoding?
    =====================================================
    Fading out. " ... J. Arthur Rank on gong."

  • Report Generation Toolkit doesn't work after patches A thru I.

    For LV7 Express, RGT demo doesn't run any of its operations, Word, Excel,... See attach for cause. Can anyone tell me how to fix this?
    Attachments:
    RGDemo1.doc ‏36 KB

    Hi,
    When you get this error, it's normally because the version of the Report Generation Toolkit VIs in your VI that you are trying to open is different from the one on your PC. Normally you can just right click on the bad VIs on the block diagram and choose "Relink To SubVI".
    There's a KnowledgeBase that describes another issue when using different versions of Microsoft Office.
    Best regards,
    Philip C.
    National Instruments
    - Philip Courtois, Thinkbot Solutions

  • Print VI front panel to file does not work after building executable.

    I am using a property and invoke node to print the front panel of my VI to an HTML file.  It works fine in the development mode. After Building the application, this subvi will no longer
    print the front panel.  Is there some special files that included in the build??

    You can use the Report Generation VIs to generate the HTML report.  Specifically, you could use Append Front Panel Image to Report.vi and Save Report to File.vi to save the image of the panel to an HTML report.
    Check out the examples in examples\reports to get a better idea how to use these VIs if you've never used them before.
    Good luck,
    -D
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • Program does not work after build

    Hi,
    I have built a program today that builds fine (no errors or warnings) but it fails when running the exe.  I am using drivers for a spectrum analyzer (Rohde & Schwarz FSG) and when one of these drivers is called, it returns an error.  Other drivers are run before this particular vi.  Anyone have any idea how to troubleshoot this?  I'm going to try and build the vi on its own and see if it works.  In the mean time, if anyone has any suggestions, please let me know.
    UPDATE: I built the file on its own and it still does not work.  Again, when I run it in developer mode, it works fine.
    VISA Write in rsspecan_core_write.vi->rsspecan_core_attribute_wr​ite_int.vi:3->subrsspecan_core_attribute_express.v​i:2->rsspecan Configure Averaging Type.vi:Instance:Instance           1 41Saved   rsspecan Configure Averaging Type .vi:1->rsspecan Configure Averaging Type.vi
    Thanks.

    I've decided to post the vi since it is free to download.  If anyone has an FSG and wants to build this file and see if they can run it, please do so.
    Attachments:
    rsspecan Configure Averaging Type.vi ‏31 KB

  • Fingerprint Reader not working after windows password reset

    Hi There
    I was using windows login (single admin user) and fingerprint reader to login to my Thinkpad T510. Yesterday night I changed windows password and I didn't update finger print. Unfortunately I am not able to login when I tried to login using windows login today, I forgot the password and when I tried finger print reader it is just throwing error.
    Why finger print is not working after windows password reset? What should I do to login?
    Help would be appreciated!!

    I just called the tech support just now? I just asked the 'why the finger print reader not recognizing the finger print after changing windows password?', and he gave the following answers
    1. You should change fingerprint while changing windows password.  I don't understand the reason behind it, btw is this true?
    2. We can't do anything for this issue.

  • Hello, I am trying to upgrade to yosemite, but I get the "disk cannot be used to startup your computer" error. Resizing the partition does not work, I get the error "MediaKit reports no such partition" probably because I installed linux in dual boot

    Hello, I am trying to upgrade my macbook pro to yosemite, but I get the "disk cannot be used to startup your computer" error.
    Resizing the partition does not work for me and I get the error "MediaKit reports no such partition" probably because I installed linux in dual boot and the disk manager is lost.
    Anyway to tell the yosemite installer that it should not pay attention whether the disk is bootable or not ?
    If I am doomed, any way to delete the installer and downloaded OS from my hard drive ?
    Thanks for your help

    As usual, the Linux installer wrecked the partition table. You would have to boot from your OS X installation disc and repartition. Doing so will of course remove all data from the drive, so you must back up first if you haven't already done so.

  • Error in report generation-Load report failed

    I have installed crystal reports  for VS2005 runtime in my live environment.When i try to load the report file from a .Net page i am getting the error'Error in Report generation-Load report failed'.
    This works fine in development and testing but when moved to production we are having issues.
    I believe i have a workaround i.e i need to open the rpt in a VS 2005 environment and re-write the connection string again.This fix had worked in development and testing when we had the same issue.
    But not sure if this is a known issue with crystal reports and if so do we have any hot fixes for the same.
    Please help.

    Hi Don,
    The reason why i posted the item on 'data Connectivity issues' is because i suspect the problem is with the connection string.Though i had provided the correct connection string,re-writing the connection string with the same info might help to fix the issue with loading the report.
    Does it mean that there is a problem in the connectivity?
    I have a risk here that i cant re-write the connection string..i.e to open the RPT file in VS2005 and bind it.The production web server & database server sits in a  third party environment and it is not in the company network.So i cant connect to this server to re-write from any other severs in the network.
    Is there any fix which can applied to the server to get this issue resolved?
    Cheers
    Nithya.

  • 12002 The Reporting Web Service is not working.

    Hi :)
    I have WSUS on Windows Server 2012 std. with Internal Database. Today I've installed 7 updates from patch tuesday and after restart I've got
    error 12002 The Reporting Web Service is not working
    I can see now that updatet clients can not report their status anymore :(
    What's up ? Any suggestion ?
    Best regards
    Nenad

    Hi,
    I would start by verifying that the /ReportingWebService resource is properly configured in IIS.
    Correct configurations can be found in the WSUS Technical Reference Guide: IIS
    Settings for WSUS 3.0 SP2 Web Services.
    Also,Under ReportingWebService
    Made sure all were set to disabled except for Anonymous Authentication
    Anonymous Authentication Enabled
    ASP .NET Impersonation Disabled
    Basic Authentication Disabled
    Forms Authentication Disabled
    Windows Authentication Disabled
    Regards,
    Clarence
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear and the setup menu says there is an error. Any idea of what is happening?

    I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?

    What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
    Tell us what network setup you are using..
    If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time.

  • Hiya, my ipod touch 4th generation cameras are not working.

    Hiya, my ipod touch 4th generation cameras are not working. I had the screen replaced about a month ago and it was working fine.  I woke up the other day and went on my camera and it had stopped working, it won't let me change from the front to back camera so i don't know what the problem  is: now all it shows when i go on the camera app is the shutter or a black screen. I have tried the advice people have said but it hasn't seemed to work. Any help would be appreciated!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar
    However, it other than Apple or an Apple Authorized Service Provider did the previous screen replacement , Apple will not help.
    For the future, saying that you tried the advice people have said, provides us with zero information as to what yu tried.

  • Xcode 3.2.3 is not working after installing on Mac 10.6.3?As when I start Xcode it is giving error"An unknown installation error occurred"

    Xcode 3.2.3 is not working after installing on Mac 10.6.3?As when I start Xcode it is giving error"An unknown installation error occurred"
    provide solution.

    Well I didn't enter a hostname from my ISP, but I did need to enter as a Host Domain the sub-domain (CNAME) that we use for our server. Don't know all the proper terminology, but I hope that's clear enough to someone to help. As soon as I did that, it worked again.
    Thanks for the tip,
    W

Maybe you are looking for

  • HT3702 How do I remove a credit card from my account without putting a new one on to my account?

    How do I remove a credit card from my account without putting a new one on to my account?

  • How do I sync with a different username in Palm desktop

    I inherited my husband's Treo 680 when he got his HTC EVO.  I want to keep all the applications/programs he has, but use my own calendar.  I installed palm desktop and created a new username.  How can I sync with that instead of the informtion my hus

  • Resource Info for new Digital Video Camera.

    Hello. Can anyone suggest a good resouce/magazine/website to research digital video cameras? I have used the same Sony DCR TRV120 for the past nine years. It ran out of steam. Mostly used it for family, nature and even spots for a local hokie TV stat

  • Adobe Audition

    Has anyone tried running Adobe Audition on a Mac Book Pro? I work for a radio station and use that to edit all of my audio files... I know Apple makes a product like that.. What is it called??

  • Software Update's Never Finish Downloading Part 2

    Ok so I thought I was done dealing with this but guess not... I am having a hard time updating to Mac 10.5.4. It was an automatic update but every time it gets started I hit a snag about 10 min into it and it "freezes". The computer volume buttons st