Error 8 while building App
Hello,
I am having an issue with an app I am trying to build. I get the folowing error message during the build:
Error 8 occurred at Invoke Node in ABAPI Dist read
linkages.vi->ABAPI Dist Cmp Settings to Disk Hier.vi->ABAPI Get Settings
From
File.vi->EBEP_Invoke_Build_Engine.vi->EBUIP_Build_Invoke.vi->EBUIP_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: File
permission error.
NI-488: DMA hardware
error detected.
Method Name: Linker:Read Info From File
C:\Documents and Settings\. . . . \Notes Popup.vi
The odd thing is the VI filename that is listed is one that is not used or exists anymore.
I am using LV 8.0 on Win XP
Thnaks
Tom,
The .aliases file is usually stored in the same directory as your .lvproj file. If you are missing this file for some reason here is something you can do to recreate it.
1) Go into Labview 8 and create a new Project.
2) Save the project on your desktop (you can give it any name)
3) A .aliases file should have been created on your desktop when you saved your project in the previous step. Copy this file into the same directory as your main project (the same directory as the .lvproj file).
If you follow these steps you will now have a .aliases file and this will most likely fix your problem.
I hope this helps,
Justin D.
Applications Engineer
National Instruments
Similar Messages
-
Error while building execution plan
Hi, I'm trying to create an execution plan with container EBS 11.5.10 and subject area Project Analytics.
I get this error while building:
PA-EBS11510
MESSAGE:::group TASK_GROUP_Load_PositionHierarchy for SIL_PositionDimensionHierarchy_PostChangeTmp is not found!!!
EXCEPTION CLASS::: java.lang.NullPointerException
com.siebel.analytics.etl.execution.ExecutionPlanDesigner.getExecutionPlanTasks(ExecutionPlanDesigner.java:818)
com.siebel.analytics.etl.execution.ExecutionPlanDesigner.design(ExecutionPlanDesigner.java:1267)
com.siebel.analytics.etl.client.util.tables.DefnBuildHelper.calculate(DefnBuildHelper.java:169)
com.siebel.analytics.etl.client.util.tables.DefnBuildHelper.calculate(DefnBuildHelper.java:119)
com.siebel.analytics.etl.client.view.table.EtlDefnTable.doOperation(EtlDefnTable.java:169)
com.siebel.etl.gui.view.dialogs.WaitDialog.doOperation(WaitDialog.java:53)
com.siebel.etl.gui.view.dialogs.WaitDialog$WorkerThread.run(WaitDialog.java:85)
Sorry for my english, I'm french.
Thank you for helping meHi,
Find the what are all the subjectarea's in execution plan having the task 'SIL_PositionDimensionHierarchy_PostChangeTmp ', add the 'TASK_GROUP_Load_PositionHierarchy ' task group to those those subjectares.
Assemble your subject area's and build the execution plan again.
Thanks -
Error while building sample application "Developing an Order Application"
hi ,
I tried to create a simple Mobile application using the instructions for "Tutorial: Developing an Order Application for Handhelds" given at :-
http://help.sap.com/saphelp_nwmobile71/helpdata/en/46/7294498d870ad3e10000000a11466f/frameset.htm
For the same , by using TCdoe SDOE_WB i created a new SWCV named ORDER_TAKER,
with a Data Object - > ORDER
added Data Object header node -> ORDERHEADER
The ORDERHEADER contains the following fields:
ORDERID CHAR8
CUSTID CHAR4
LONGTEXT CHAR32
SERVICEUNIT CHAR32
CREATED_ON DATS
CREATED_AT TIMS
As per the tutorial I created Mobile Service Component as "order_sv". under which created Data Objects , and a service name orderService . Now when I copied the code of Defining the Custom Methods , I am getting following error while building the MSC........
Line: -----
* [javac] Compiling 8 source files to C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\classes
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:43: cannot find symbol
[javac] ERROR: symbol : class Order_svModel
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: if( !(((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).getOrderOrderheaders().size() > 0))
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:43: cannot find symbol
[javac] ERROR: symbol : class Order_svModel
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: if( !(((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).getOrderOrderheaders().size() > 0))
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:43: cannot find symbol
[javac] ERROR: symbol : variable OcaRoot
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: if( !(((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).getOrderOrderheaders().size() > 0))
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:45: cannot find symbol
[javac] ERROR: symbol : class OrderOrderheader
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: OrderOrderheader order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:45: cannot find symbol
[javac] ERROR: symbol : class Order_svModel
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: OrderOrderheader order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:45: cannot find symbol
[javac] ERROR: symbol : class Order_svModel
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: OrderOrderheader order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:45: cannot find symbol
[javac] ERROR: symbol : variable OcaRoot
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: OrderOrderheader order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:49: cannot find symbol
[javac] ERROR: symbol : method valueOf(java.lang.String)
[javac] ERROR: location: class java.util.Date
[javac] ERROR: order.setCreatedOn(Date.valueOf("2007-06-30"));
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:50: cannot find symbol
[javac] ERROR: symbol : variable Time
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: order.setCreatedAt(Time.valueOf("08:45:00"));
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:73: cannot find symbol
[javac] ERROR: symbol : class Order_svModel
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:73: cannot find symbol
[javac] ERROR: symbol : class Order_svModel
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:73: cannot find symbol
[javac] ERROR: symbol : variable OcaRoot
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:77: cannot find symbol
[javac] ERROR: symbol : method valueOf(java.lang.String)
[javac] ERROR: location: class java.util.Date
[javac] ERROR: order.setCreatedOn(Date.valueOf("2007-07-05"));
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:78: cannot find symbol
[javac] ERROR: symbol : variable Time
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: order.setCreatedAt(Time.valueOf("10:00:00"));
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:80: cannot find symbol
[javac] ERROR: symbol : variable OcaRoot
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: OcaRoot.getInstance().commit();
[javac] ERROR: ^
[javac] 30 errors *
Line: -----
Please help...........
Ekam
Edited by: Ekam Preet Singh on Sep 29, 2011 10:32 AMHi,
Please have a look at this thread,
Re: Error in CompatibilityMode
Regards,
Saravanan K -
HT5642 Unable to download app this time error while downloading app please help!!!
when i download some app from apps store i get the following error
"Unable to download app this time error while downloading app" please help!!!
i ve tried these Things but
didnt workout yet
1) i tried hard reset
2)i tried logout/login Itune & appstore
3)Connected to pc and rest setting Network and Full Rest
all of no use... i dont want to update my softwre from IOS 6.0
Plx help!1Hey Prahaladvatsan,
Thanks for the question. If I understand correctly, there is a blank app icon on the home screen. It looks like you have already done some troubleshooting. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario -
Error while building SUP based iphone client application
Hi,
I am getting the following error while building the application for iphone simulator. I tried by changing search path settings and added libraries to Link binary search path.I really stuck here. Any body please help me how to solve it.
Undefined symbols for architecture i386:
"_OBJC_CLASS_$_SUPMessageClient", referenced from:
objc-class-ref in SUP101AppDelegate.o
"_OBJC_CLASS_$_MBOLogger", referenced from:
objc-class-ref in SUP101AppDelegate.o
objc-class-ref in SUP101CallbackHandler.o
Thanks in advance
BalaHi Rockky/Wang
I have added the following libraries to "Link Binary with Libraries" . I am using xcode 4.0.2 , SDK 4.3 and MAC-OS 10.6 . Libraries are belongs to SUP 1.5.5. simulator-- iphonesimulator 4.3
AddressBook.framework
CoreFoundation.framework
QuartzCore.framework
Security.framework
libicucore.A.dylib
libstdc++6.dylib
libz.1.2.3.dylib
libclientrt.a
libMO.a
libSUPObj.a
After adding all these libraries automatically added path to "Link search path" as follows
$(inherited)
"$(DEVELOPER_DIR)/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.3.sdk/usr/lib"
"$(SRCROOT)/../../../libs/Debug-iphonesimulator"
Header search path i have given as following
"/Users/RavuriB/includes/**"
"/Users/RavuriB/TravelRequestMAP/Generated Code/**"
Still i am getting the same error
Undefined symbols for architecture i386:
"_OBJC_CLASS_$_MBOLogger", referenced from:
objc-class-ref in SUP101CallbackHandler.o
"_OBJC_METACLASS_$_SUPDefaultCallbackHandler", referenced from:
OBJCMETACLASS_$_SUP101CallbackHandler in SUP101CallbackHandler.o
"_OBJC_CLASS_$_SUPDefaultCallbackHandler", referenced from:
OBJCCLASS_$_SUP101CallbackHandler in SUP101CallbackHandler.o
ld: symbol(s) not found for architecture i386
collect2: ld returned 1 exit status
i tried by changing paths differently but no luck.
is that SUP 1.5.5 version is suitable for the xcode version and SDK?. Am I forgot to add any frameworks ? or any thing i need to change. I am really stuck at this problem . Can you Please help me to come out of this problem.
Thanks & Regards
Bala -
hi ,
I m getting an error while building flex application
Error Description
"An internal Build Error has occured" Right click for more
information"
In my flex application there are around 5000 line of code .
i am binding 2000 Xml to the application
this much line of code causing a error
Please Help Me out
ThanXCode Snippet could be useful here in us understanding the issue.
-
Error while building Webdynpro application
Hi all,
I am getting error while building web dynpro application.
Error is as :
Error Web Dynpro Generation: Metadata constraint of Component ExtraShifts is violated: ViewElementAggregation "//WebDynpro/View:dk.cph.sec.wd.extrashifts.application.ExtraShiftsView/RootUIElementContainer/Child:OuterGroup/Child:TuesdayGroup/Child:TuesdayTable/OutgoingAggregation:GroupedColumns", Role "Definition": A minimum of 1 object(s) is required ExtraShifts.wdcomponent WD_CPH_SEC_ExtraShift/src/packages/dk/cph/sec/wd/extrashifts/application
Please help me to resolve it.
Thanks,
Devender VHi,
Please have a look at this thread,
Re: Error in CompatibilityMode
Regards,
Saravanan K -
Error while building the installer
Hello,
I got following Error while building installer. Can anybody please tell me what is going wrong. Thanks
CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_BuildDevPart.vi >> NI_MDF.lvlib:MDFBuildDevPart_Open.vi
Loading product deployment information
Loading product deployment information
Adding files to installer
*** Error: Windows SDK function returned an error. (Error code -12)
Error accessing build path "D:\Project\QDAS \Builds\QDAS\".
Error creating directory "D:\Project\QDAS \Builds\QDAS\".
The system cannot find the path specified.
*** End Error ReportHi labviewer,
This error can be due to many different reasons, can you give more details as to what you are attempting to do in your application, what software, if any, you are using in addition to LabVIEW, any additional installers etc.
Message Edited by TMC-NI on 04-27-2008 09:06 PM -
Error while building webserivce(using workshop)
Hi,
I get this error while building a web service (developed using Weblogic Workshop-beta
version ) .
A database control is used to fetch data for the webservice.
The error in the Workshop IDE and the server are pasted below.
Please help.
Thanks and Regards,
SSN
Workshop output
Charges.jws 0 An unexpected exception occurred while attempting to process the classes
and annotations for this Web Service. Error: Unknown KNEX string: description.null
Server output
java.lang.NullPointerException
at java.lang.Class.isAssignableFrom(Native Method)
at weblogic.knex.wsdlgen.WsdlTypeBagImpl.getElemRef(WsdlTypeBagImpl.java:928)
at weblogic.knex.wsdlgen.WsdlTypeBagImpl.crackClass(WsdlTypeBagImpl.java:386)
at weblogic.knex.wsdlgen.WsdlTypeBagImpl.addType(WsdlTypeBagImpl.java:522)
at weblogic.knex.wsdlgen.WsdlTypeBagImpl.filter(WsdlTypeBagImpl.java:606)
at weblogic.knex.wsdlgen.WsdlTypeBagImpl.getElemRef(WsdlTypeBagImpl.java:940)
at weblogic.knex.wsdlgen.WsdlTypeBagImpl.addParamHolder(WsdlTypeBagImpl.java:121)
at weblogic.knex.wsdlgen.Schemas.addPartHolder(Schemas.java:45)
at weblogic.knex.wsdlgen.TypeXlatorImpl.createMessage(TypeXlatorImpl.java:221)
at weblogic.knex.wsdlgen.TypeXlatorImpl.fromJavaOp(TypeXlatorImpl.java:721)
at weblogic.knex.wsdlgen.TypeXlatorImpl.fromJavaService(TypeXlatorImpl.java:831)
at weblogic.knex.dispatcher.TypeUtils.makeWsdlService(TypeUtils.java:1388)
at weblogic.knex.dispatcher.TypeUtils.makeWsdl(TypeUtils.java:1459)
at weblogic.knex.dispatcher.DispFile.makeDispClass(DispFile.java:2528)
at weblogic.knex.dispatcher.DispFile.makeDispFile(DispFile.java:611)
at weblogic.knex.dispatcher.DispUnit.makeDispUnit(DispUnit.java:50)
at weblogic.knex.dispatcher.DispCache.ensureDispUnit(DispCache.java:584)
at weblogic.knex.dispatcher.HttpServer.doGet(HttpServer.java:297)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:945)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:332)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:242)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5352)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:718)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3032)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2466)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)Hello,
The released version of the Weblogic Workshop is now available (25Jun2002) with the WebLogic Platform:
http://dev2dev.bea.com/products/product.jsp?highlight=wlplatform
Thanks for trying the beta version.
Bruce
SSNarayan wrote:
Hi,
I get this error while building a web service (developed using Weblogic Workshop-beta
version ) .
A database control is used to fetch data for the webservice.
The error in the Workshop IDE and the server are pasted below.
Please help.
Thanks and Regards,
SSN
Workshop output
Charges.jws 0 An unexpected exception occurred while attempting to process the classes
and annotations for this Web Service. Error: Unknown KNEX string: description.null
Server output
java.lang.NullPointerException
at java.lang.Class.isAssignableFrom(Native Method)
at weblogic.knex.wsdlgen.WsdlTypeBagImpl.getElemRef(WsdlTypeBagImpl.java:928)
at weblogic.knex.wsdlgen.WsdlTypeBagImpl.crackClass(WsdlTypeBagImpl.java:386)
at weblogic.knex.wsdlgen.WsdlTypeBagImpl.addType(WsdlTypeBagImpl.java:522)
at weblogic.knex.wsdlgen.WsdlTypeBagImpl.filter(WsdlTypeBagImpl.java:606)
at weblogic.knex.wsdlgen.WsdlTypeBagImpl.getElemRef(WsdlTypeBagImpl.java:940)
at weblogic.knex.wsdlgen.WsdlTypeBagImpl.addParamHolder(WsdlTypeBagImpl.java:121)
at weblogic.knex.wsdlgen.Schemas.addPartHolder(Schemas.java:45)
at weblogic.knex.wsdlgen.TypeXlatorImpl.createMessage(TypeXlatorImpl.java:221)
at weblogic.knex.wsdlgen.TypeXlatorImpl.fromJavaOp(TypeXlatorImpl.java:721)
at weblogic.knex.wsdlgen.TypeXlatorImpl.fromJavaService(TypeXlatorImpl.java:831)
at weblogic.knex.dispatcher.TypeUtils.makeWsdlService(TypeUtils.java:1388)
at weblogic.knex.dispatcher.TypeUtils.makeWsdl(TypeUtils.java:1459)
at weblogic.knex.dispatcher.DispFile.makeDispClass(DispFile.java:2528)
at weblogic.knex.dispatcher.DispFile.makeDispFile(DispFile.java:611)
at weblogic.knex.dispatcher.DispUnit.makeDispUnit(DispUnit.java:50)
at weblogic.knex.dispatcher.DispCache.ensureDispUnit(DispCache.java:584)
at weblogic.knex.dispatcher.HttpServer.doGet(HttpServer.java:297)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:945)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:332)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:242)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5352)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:718)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3032)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2466)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133) -
Error 8 File permission error while building executable for a RT
I got error 8 File permission error while building executable for a RT. It happened always after build, I mean new startup.rtexe and startup.alias files have been created. At the build properties, it was set use default .alias file.
I had the executable built successfully at one time.
The detail message is:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 8 occurred at Open/Create/Replace File in RTBEP_Generate_Deploy_Instructions.vi->RTBEP_Invoke_Build_Engine.vi->RTBUIP_Build_Invoke.vi->RTBUIP_Build_Rule_Editor.vi->RTBUIP_Open_Properties.vi->RTBUIP_Item_OnDoProperties.vi->RTBUIP_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: File permission error. You do not have the correct permissions for the file.
=========================
NI-488: DMA hardware error detected.
I checked relevant posts, couldn't find any clue.
Please give me some ideas.
Thanks.Hi Ya-hoo,
Error building application in LabView 8.0 seems to describe a similar situation. The .alias file is important, as described in that discussion forum.
Cheers.
| Michael K | Project Manager | LabVIEW R&D | National Instruments | -
IP Resource Errors While Building a Windows Failover Cluster on Azure
I have setup a failover cluster in Microsoft Azure on four VMs. I have two nodes in one subnet/region, one node in another subnet/region and a final node in a third subnet/region. The cluster passed the validation wizard and was successfully built, but the
two nodes in other subnets will not go online, reporting "Failed to bring the resource 'IP Address x.x.x.x' online".
Azure Vnet Setup
Vnet 1 - South Central US - 10.16.16.0/16 - Nodes 1 & 2 - Online
Vnet 2 - West US - 10.116.16.0/16 - Node 3 - Offline
Vnet 3 - East US - 10.216.16.0/16 - Node 4 - Offline
All three IP Address resources are DHCP. I've attempted to make them static but they still failed while coming online. If I click "Information Details" on the error I get:
Error code: 0x80071397
The operation failed because either the specified cluster node is not the owner of the resource, or the node is not a possible owner of the resource.
It seems to be an issue with the way Azure DHCP works, but I'm stalled. There must be a way to get his working. What am I missing?Hi Michael Lapidakis,
Starting in Windows Server 2008, a feature called an “OR dependency” was added to Failover Clustering which gave admins the ability to have nodes with a Network Name that
could use one IP Address OR another IP Address .In a multisite cluster, it is expected that 1 IP address is offline as it is an OR relationship.
You can refer the following related article to realize more detail settings of multi-site site cluster IP settings.
IP Resource Errors While Building a Windows Failover Cluster on Azure
https://social.technet.microsoft.com/Forums/en-US/ca2cbf5e-abef-4c23-9cff-7b6ca44acc23/ip-resource-errors-while-building-a-windows-failover-cluster-on-azure?forum=winserverClustering
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi
I am getting error while downloading app,it's shows me waiting and not downloading app, this happend only when I update the app and not for all apps ,right now I stuck with 5-6 apps like that.
I even can't delete that apps too.
Please anyone know the solution, advise meIf there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
How to Solve the Problem of An iPad App Download Stuck on “Waiting”
http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
Another thing to try - Turn the iPad Off & then back ON.
If that doesn't work:
• Log out of your iTunes store account. Go to Settings > Store > Sign Out Then press the Home button.
• Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
• After restart, the Waiting should be gone.
Cheers, Tom -
Hello,
There is an error while build EXE:
"Ein nicht ausführbares VI kann nicht ohne das dazugehörige Blockdiagramm gespeichert werden"
(in english like: a non-executable vi can not be saved without the corresponding block diagram)
the full message:
Beim Speichern folgender Datei trat ein Fehler auf:
C:\dev\...\xxx.vi
Informationen zum Lösen dieses Problems finden Sie auf der Seite ni.com/ask für Supportanfragen. Verwenden Sie folgende Informationen als Referenz:
Fehler 1502 bei AB_Source_VI.lvclass:Close_Reference.vi -> AB_Build.lvclassave.vi -> AB_Build.lvclass:Copy_Files.vi -> AB_Application.lvclass:Copy_Files.vi -> AB_EXE.lvclass:Copy_Files.vi -> AB_Build.lvclass:Build.vi -> AB_Application.lvclass:Build.vi -> AB_EXE.lvclass:Build.vi -> AB_Engine_Build.vi -> AB_Build_Invoke.vi -> AB_Build_Invoke.vi.ProxyCaller
Mögliche Ursachen:
LabVIEW: Ein nicht ausführbares VI kann nicht ohne das dazugehörige Blockdiagramm gespeichert werden.
What is the problem? Should I remove checkbox to remove block diagram code?
Thanks
Eugen Wiebe
Bernstein AG
CLAD - Certified LabView Associate DeveloperThe exact wording of the error 1502 is:
"LabVIEW: Cannot save a bad VI without its block diagram."
Let me guess:
You have now a build script with "Enable Debugging" disabled. If you enable this option, building the EXE is possible, but the EXE will most likely not run. Correct?
It seems to me, that you either have a faulty LV installation or some of your VIs are corrupt. This is something which can happen randomly when upgrading projects from older LV versions. Masscompile/Force compile of the affected VIs CAN help, but it is no promise.
Please try to break down the issue to a set of VIs (maybe a 3rd party instrument driver?).
thanks,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
BI Apps DAC error while building execution plan
While building execution plan in DAC i am getting following error.
C_MICRO_INCR_LOAD_V1
MESSAGE:::group TASK_GROUP_Past_Due_Cost for PLP_ARSnapshotInvoiceAging is not found!!!
EXCEPTION CLASS::: java.lang.NullPointerException
com.siebel.analytics.etl.execution.ExecutionPlanDesigner.getExecutionPlanTasks(ExecutionPlanDesigner.java:818)
com.siebel.analytics.etl.execution.ExecutionPlanDesigner.design(ExecutionPlanDesigner.java:1267)
com.siebel.analytics.etl.client.util.tables.DefnBuildHelper.calculate(DefnBuildHelper.java:169)
com.siebel.analytics.etl.client.util.tables.DefnBuildHelper.calculate(DefnBuildHelper.java:119)
com.siebel.analytics.etl.client.view.table.EtlDefnTable.doOperation(EtlDefnTable.java:169)
com.siebel.etl.gui.view.dialogs.WaitDialog.doOperation(WaitDialog.java:53)
com.siebel.etl.gui.view.dialogs.WaitDialog$WorkerThread.run(WaitDialog.java:85)Hi,
Go To Views -> Design -> Subject Areas tab and select your Subject Area.
Upon selecting the subject area, in the lower pane you will find Tasks tab. Click on the task tab, there Add/Remove button will appear.
Click on the Add/Remove button, one dialog box will be shown and in that click on the Query button and enter task group name *"TASK_GROUP_Past_Due_Cost"* and click on go button.
Once that task appears click on Add button and click on the Save button.
This will add that particular task group to your subject Area. Once these steps are done build the execution plan and start the DAC load.
Hope this helps....
Thanks,
Navin Kumar Bolla -
Error while building javaeetutorial5
When I try to build "bookstore" from javaeetutorial5 I get this error:
Buildfile: build.xml
-pre-init:
init:
default-ear:
-pre-compile:
bpp-actual-compilation:
[echo] Compiling bookstore
[javac] Compiling 11 source files to /opt/javaeetutorial5/examples/web/bookstore/build/classes
BUILD FAILED
/opt/javaeetutorial5/examples/bp-project/command-line-ant-tasks.xml:89: /opt/javaeetutorial5/examples/web/bookstore/c:/Sun/AppServer not found.
Total time: 1 second
The solution is to edit the file /javaeetutorial5/examples/bp-project/build.properties.sample
--davidHi David,
Yes, the problem came from the ../bp-project/build.properties & ../bp-project/app-server.properties files. As indicated from your error messages "/opt/javaeetutorial5/examples/web/bookstore/c:/Sun/AppServer not found." It seems you are using AppServer on a solaris machine while those configuration files are default for window enviroment "c:/Sun/AppServer not found."
Here is what you should to do:
-Copy build.properties.sample to build.properties
-Edit the variables below for the correct path:
javaee.home=<The installation directory of your AppServer>
javaee.server.name=<machine name> (localhost)
javaee.server.port=<The port number for the server instance> (8080)
javaee.server.username=<The administrator username>
javaee.server.passwordfile=</path/to/passwordfile>
Note:
Inside passwordfile add: AS_ADMIN_PASSWORD=<The administrator password>
javaee.adminserver.port=<The port number for admin server> (4848)
-Do the same thing for app-server.properties file (optional)
You can find the information above from the link below
http://java.sun.com/javaee/5/docs/tutorial/doc/
Section: About The Examples
-davis -
Classpath error while building the web dynpro project
Hi
I have created an application in which on clicking the button on one view , next view opens and data is displayed in the tables. This data i am giving as static, and for that i have created a java file. this java file is located in the subfolder i have created in the package path i have given. While building the application, i get these two errors :
1) The project was not built due to classpath errors (incomplete or involved in cycle).
2) Missing required source folder 'BPOutageTable/BPOT'
BPOutageTable is the application name, and BPOT is the subfolder in which java file is present.
This application is similar to "The Master/Detail Viewer Application" example in the tutorials.
Can anybody please help in this?
Thanks & regards,
AnupreetHi,
You have give your classpath in your "lib" folder of the Dynpro application.
check your lib folder shows exact class path or not.
if you wish to add any jar files import it to your lib folder so you will not have compilation problem.
Hope it helps.If it is then close this thread.
Regards,
Guru
Maybe you are looking for
-
"Importer reported a generic error" message while importing ProRes 422 clip
Hi all. I am getting an "Importer reported a generic error" message when I try to import a ProRes 422, linear PCM clip into Premiere Pro CS6. I have imported other ProRes 422 clips in previous projects without a problem, although those clips did no
-
How to add birthday on Mountain Lion?
Can anyone tell me how to add birthday on Mountain Lion? in contacts there is no such field.
-
Hi, In the samplesale RPD, I saw a lot of alias tables and I check the mapping in physical layer, there is no mapping between source table of alias table and F, just have mapping between alias table and F, so what I want to know is what's the purpose
-
App Builder produces "Not Executable" error with Strictly Typed VI Refs
There is a very frustrating problem with the app builder in LV 8.0.1. Certain VIs compile and run fine in labview, but the app builder refuses to make them into applications. The error message is very long and ends with something like "The VI is not
-
Weird ipad shut down/start up behavior
Shut down is normal (the speed at which it shuts down is different sometimes). When i start it up, though, it sometimes gives the same twirl that it gives at shutdown, and then it shuts off again. I then have to start it up again for it to turn on.