Error 9672 help required

Epson rx620 installed 6 months ago, printing fine. Yesterday stopped printing. Reinstalled driver, no change. Deleted printer from printer list. Cannot re-add printer, keep getting error 9672. Epson says this is a Mac issue.
I've scoured the web and this support site but cannot find any guidance....any suggestions please?

Printer error, Returned to store

Similar Messages

ORA-12170 Error. Help Required.

Today i installed Oracle 10g client in my system. It was installed on top of Oracle 9i client. After installation a new directory named product was created inside the Oracle folder.
I copied the tnsnames.ora and sqlnet.ora files from C:\oracle\ora90\network\ADMIN to C:\oracle\product\10.1.0\Client_1\NETWORK\ADMIN.
Both the versions of Oracle are loaded inside the same folder.
After all these steps when i tried to log in into sql* plus i got the error
ORA-12170 : TNS: Connect timed out occure.
I tried changing the value of parameter sqlnet.inbound_connect_timeout from 3 to 30. But it didnt work.
Kindly help me out.

duplicate thread
ORA-12170

IPlanet Error - URGENT HELP Required

Hi All,
I am facing a problem with a deployed Application on iPlanet 6.0 on Windows 2000 Server.
The Application works fine but after a couple of days it starts chewing up a lot of memory on the Windows box and ultimately hangs.
The KJS logs have the following errors :-
[15/Jan/2002 18:45:32:3] error: SERVLET-put_nonserial: Putting non-serializable object when using NAS session
[15/Jan/2002 18:45:32:5] error: SERVLET-put_nonserial: Putting non-serializable object when using NAS session
[15/Jan/2002 18:45:33:1] error: SERVLET-put_nonserial: Putting non-serializable object when using NAS session
[15/Jan/2002 18:45:33:1] error: SERVLET-put_nonserial: Putting non-serializable object when using NAS session
[15/Jan/2002 18:47:09:8] error: Exception: SERVLET-exception: Exception occurred
Exception Stack Trace:
java.lang.ClassNotFoundException: com.diagnostix.dom.Patient
     at java.io.ObjectInputStream.inputObject(ObjectInputStream.java:981)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:369)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:232)
     at com.netscape.server.servlet.platformhttp.PlatformNASSession.getMemberValue(Unknown Source)
     at com.netscape.server.servlet.platformhttp.PlatformNASSession.finalInvalidation(Unknown Source)
     at com.netscape.server.servlet.platformhttp.SessionInvalidator.service(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
     at com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown Source)
     at com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unknown Source)
     at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
     at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
     at com.kivasoft.thread.ThreadBasic.run(Native Method)
     at java.lang.Thread.run(Thread.java:479)
[15/Jan/2002 18:47:09:8] error: Exception: SERVLET-exception: Exception occurred
Exception Stack Trace:
java.lang.ClassNotFoundException: com.diagnostix.dom.UserAccount
     at java.io.ObjectInputStream.inputObject(ObjectInputStream.java:981)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:369)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:232)
     at com.netscape.server.servlet.platformhttp.PlatformNASSession.getMemberValue(Unknown Source)
     at com.netscape.server.servlet.platformhttp.PlatformNASSession.finalInvalidation(Unknown Source)
     at com.netscape.server.servlet.platformhttp.SessionInvalidator.service(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
     at com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown Source)
     at com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unknown Source)
     at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
     at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
     at com.kivasoft.thread.ThreadBasic.run(Native Method)
     at java.lang.Thread.run(Thread.java:479)
[15/Jan/2002 18:47:09:8] error: Exception: SERVLET-exception: Exception occurred
Exception Stack Trace:
java.lang.ClassNotFoundException: com.diagnostix.dom.cumulative.CumDefaultDateRange
     at java.io.ObjectInputStream.inputObject(ObjectInputStream.java:981)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:369)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:232)
     at com.netscape.server.servlet.platformhttp.PlatformNASSession.getMemberValue(Unknown Source)
     at com.netscape.server.servlet.platformhttp.PlatformNASSession.finalInvalidation(Unknown Source)
     at com.netscape.server.servlet.platformhttp.SessionInvalidator.service(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
     at com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown Source)
     at com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unknown Source)
     at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
     at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
     at com.kivasoft.thread.ThreadBasic.run(Native Method)
     at java.lang.Thread.run(Thread.java:479)
Please help me out with this. This is very urgent.
THANKS a lot in Advance.

Hi there,
It's difficult to be absolutely certain as to whether this is a symptom of another problem particularly as you mention leaking memory (which can generate lots of different errors).
This first error (error: SERVLET-put_nonserial:...) would must likely be caused by putting a non-serializable object into the a HTTP Session context when the Web application is marked as distributable. The synchronization of session data relies on the Java serialization mechanism and while Non-Serializable objects can be put into the HTTP Session context they will cause the synchronization proces to choke. The exceptions (and the memory leak) may be a consequence of putting some unexpected data into the Session object. You can test this by marking the application as non-distributable.
Hope this helps
Amanda
Developer Tehcnical Support
Sun Microsystems
http://www.sun.com/developers

Cisco MCS 7835i3 CM 7.1.5, unable to boot giving ECC bit DIMM Error, Urgent help required

Hi,
One of our client is using CUCM 7.1.5, on MCS 7835i3. CM is now unable to boot. giving ECC bit DIMM error. We have serviced MCS, then started, it started working but only one hard light is blinking. Is there any problem with hard or something else. As well show hardware logs are attached.
Please find attached snapshots.
Regards,
Humza Khan

Hi ,
Try to reseat the RAID controller i it helps else follow what Terry has said.
http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=migr-5074114
http://public.dhe.ibm.com/systems/support/system_x_pdf/ibm_doc_sraidmr_10i-10.03_user-guide.pdf
regds,
aman

Weblogic Service Invocation Error-Urgent help required.

failed to invoke operation 'searchCustomerDetails' due to an error in the soap layer (SAAJ); nested exception is: Message[ failed to serialize class java.lang.Objectweblogic.xml.schema.binding.SerializationException: type mapping lookup failure on class=class org.apache.xerces.dom.DeferredDocumentImpl TypeMapping=TYPEMAPPING SIZE=0
]StackTrace[
javax.xml.soap.SOAPException: failed to serialize class java.lang.Objectweblogic.xml.schema.binding.SerializationException: type mapping lookup failure on class=class org.apache.xerces.dom.DeferredDocumentImpl TypeMapping=TYPEMAPPING SIZE=0
at weblogic.webservice.core.DefaultPart.invokeSerializer(DefaultPart.java:332)
at weblogic.webservice.core.DefaultPart.toXML(DefaultPart.java:297)
at weblogic.webservice.core.DefaultMessage.toXML(Def

Hello,
are you sure you have setup the ADSUser in the ADSProxy correctly for the webdynpro?
Copy from the Config Guide:
Procedure
To set up Basic Authentication in a Java environment:
1. Log on to the Visual Administrator. (See How to Start the Visual Administrator [Seite 54]) . 2. On the Cluster tab, choose Server <x> → Services → Web Services Security
3. Choose Web Service Clients → sap.com > tcwdpdfobject → com.sap.tc.webdynpro.adsproxy.AdsProxy*ConfigPort_Document.
4. From the Authentication list, select BASIC.
Adobe Document Services Configuration Guide - 22 -
Adobe Document Services Configuration for SAP Web AS 7.0
ADSUser 5. In the User and boxes, enter as Username and a Password. Password
6. Choose Save.
7. The authentication data must be activated. For doing this navigate to Services → Deploy.
8. Choose the button Application.
9. Choose sap.com/tcwdpdfobject in the tree.
10. Choose Stop Application.
11. For restarting the application choose . Start Application
Best regards,
Dezso

Client copy error (URGENT HELP Required)

Hi all,
We did system copy of production system after that we were asked to do the client copy from 500 as source client but while performing this activity disp + work dispatcher is going in standstill mode and its turning yellow in color.
There is no error in developer trace and other logs.
Please suggest me the solution to resolve this problem as we have to finish this activity by today evening.
Thanks & Regards,
Prashant.

Hi prashant,
u checked the swap memory size.
Check ur disk sapca and also the log file folder. If it is full then
the dispatcher will not start because it can not write the log.
check the path
\usr\sap\sid\instanace\j2ee\cluster\server0\log
check this folder size if this folder size is more then remove the log
files from the archive folder which is a sub directory in log folder
copy the archives files in to a new disk and then delete from the
archive folder. Then try to start the SAP sytem .
Regards,
R.Suganya

Error message - help required

Curve 8520 - The below error is coming:
net_rim_bb_messaging_app(71) and after clicking on OK, device is not responding. After rebooting an error is coming app error 523 and a reset is being asked for, after reset the device gets start and is slow in responding. This has happend too many times now.
Even tried to downlod desktop software, that is too not working.
Dont know how to sort out the issue
Plz help

Hi vineetsaxena28
Welcome to BlackBerry Support Forums
Sorry to hear that you are having problem with your BlackBerry® Curve 8520.To recover your device please try those steps mentioned below :
( Credit JSanders )
1) Make sure you have Blackberry Desktop Manager installed.
http://na.blackberry.com/eng/services/desktop/
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
Additional information:
http://www.blackberry.com/btsc/KB24395 "Error 523", "App Error 523", or "JVM 523" appears on the BlackBerry smartphone
Article ID: http://www.blackberry.com/btsc/KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
Please try it and let us know of your progress.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Procedure creation error..help required .

Hai
I have created the procedure like this.
The work of this procedure is to update the
progress and calculate the percentage of completion.
I have marked the problem part down.
The problem is ..
there can be n number of planfields in a single SP.
and each planfield can contain n number of index and each index can contain n number of ids.
I need to check for a particular SP, whether all indexes and ids are completed.
if completed, i am talking a value of completion for other table.
After checking thru the loop..
I am calculating the completion percent.
Here the first cursor return the SP
and for that SP i need to open a cursor for index count.
Can anyone suggest me how to solve this problem.
CREATE OR REPLACE PROCEDURE "P_PROGRESS" (lDate IN DATE) IS
P_SCOPE varchar2(12);
PR_SCOPE VARCHAR2(12);
P_VALUE NUMBER(12);
TC_VALUE NUMBER(12);
TR_VALUE NUMBER(12);
P3_VALUE NUMBER(12);
FQA_VALUE NUMBER(12);
P1_VALUE NUMBER(12);
P2_VALUE NUMBER(12);
counter number(10);
FQ_VALUE VARCHAR2(12);
F_VALUE VARCHAR2(12);
DU_DATE DATE;
SP VARCHAR2(20);
pr_counter number(12);
dsm_counter number(12);
pre_value number(12);
P_H_VALUE NUMBER(12);
P_O_VALUE NUMBER(12);
P_SPNO NUMBER(10);
CURSOR CUR_SPNO IS
SELECT DISTINCT SPNO FROM V_PRODUCTION_INFO;
/*Problem part*/
CURSOR CUR_OBJ(P_SNO NUMBER) IS
SELECT DISTINCT SPNO,PLANFIELD,PLANINDEX FROM V_PRODUCTION_INFO WHERE SPNO = P_SNO;
BEGIN
OPEN CUR_SPNO;
SELECT COUNT(1) INTO COUNTER FROM PRODUCTION_STATUS WHERE
TO_CHAR(PRODN_DATE,'DD-MON-YYYY') = ldate;
IF COUNTER > 0 THEN
DELETE FROM PRODUCTION_STATUS WHERE PRODN_DATE = ldate;
END IF;
P_H_VALUE :=0;
P1_VALUE := 0;
P2_VALUE := 0;
P_O_VALUE := 0;
LOOP
FETCH CUR_SPNO INTO SP;
EXIT WHEN CUR_SPNO%NOTFOUND;
Problem Part
FOR P_SPNO IN CUR_OBJ(SP)
LOOP
SELECT DISTINCT STATUS into pre_counter FROM BEWAG_WORKALLOCATION WHERE SPEISEGEB_NR=CUR_OBJ.SPNO AND PF_PLANFELDNUMMER =CUR_OBJ.PLANFIELD AND PLANFELDINDEX = CUR_OBJ.PLANINDEX AND STATUS = 'CLOSED' AND ITEM_CODE = '355' AND UNIT = 'PI' ORDER BY STATUS;
IF STATUS = 'CLOSED' THEN
SELECT SCOPE INTO P1_VALUE FROM V_PRE_PRODUCTION_SCOPE WHERE STAGE ='PREHV';
END IF;
P_H_VALUE := P_H_VALUE + P1_VALUE;
SELECT COUNT(DISTINCT WORKAREA) into pre_counter FROM BEWAG_WORKALLOCATION WHERE SPEISEGEB_NR=CUR_OBJ.SPNO AND PF_PLANFELDNUMMER =CUR_OBJ.PLANFIELD AND PLANFELDINDEX = CUR_OBJ.PLANINDEX AND STATUS = 'CLOSED' AND ITEM_CODE = '365' AND UNIT='OBJ';
select count(distinct o.objectid) into dsm_counter from pfidx c,comp_2300 o where planfeldnummer = cur_sp.planfield
and planfeldindex = CUR_OBJ.PLANINDEX and not (c.xro_koo * 10000 < o.xlow or c.xlu_koo * 10000 > o.xhigh or c.yro_koo * 10000 < o.ylow or c.ylu_koo * 10000 > o.yhigh) order by o.objectid;
if pre_counter = dsm_counter then
     SELECT DISTINCT STATUS into pre_counter FROM BEWAG_WORKALLOCATION WHERE SPEISEGEB_NR=CUR_OBJ.SPNO AND PF_PLANFELDNUMMER =CUR_OBJ.PLANFIELD AND PLANFELDINDEX = CUR_OBJ.PLANINDEX AND STATUS = 'CLOSED' AND ITEM_CODE = '355' AND UNIT = 'PI' ORDER BY STATUS;
     IF STATUS = 'CLOSED' THEN
     SELECT SCOPE INTO P2_VALUE FROM V_PRE_PRODUCTION_SCOPE WHERE STAGE ='PREOV';
     END IF;
     P_O_VALUE := P_O_VALUE + P2_VALUE;
end if;
END LOOP;
CLOSE CUR_OBJ;
P_VALUE := P_H_VALUE + P_O_VALUE;
Problem Part ends here
SELECT MAX(SCOPE) INTO P_SCOPE FROM V_PRODUCTION_SCOPE WHERE SPNO = SP AND PROCESS ='Phase II';
IF P_SCOPE IS NOT NULL and P_SCOPE <> 'null' AND P_SCOPE <> '0' THEN
SELECT NVL(ROUND(NVL(P_VALUE/P_SCOPE) / P_SCOPE*100,2),0) INTO P_VALUE FROM DUAL;
END IF;
SELECT MAX(SCOPE) INTO P_SCOPE FROM V_PRODUCTION_SCOPE WHERE SPNO = SP AND PROCESS ='Phase II';
IF P_SCOPE IS NOT NULL and P_SCOPE <> 'null' AND P_SCOPE <> '0' THEN
PR_SCOPE := P_SCOPE;
SELECT NVL(ROUND((NVL(SUM(ACHIEVED),0) / P_SCOPE) * 100,2),0) INTO TC_VALUE FROM V_PRODUCTION_INFO WHERE SPNO = SP AND STAGE = 'Template Creation' AND TO_CHAR(ACT_DATE,'DD-MON-YYYY') <= ldate;
SELECT NVL(ROUND((NVL(SUM(ACHIEVED),0) / P_SCOPE) * 100,2),0) INTO TR_VALUE FROM
V_PRODUCTION_INFO WHERE SPNO = SP AND STAGE = 'Trasse' AND TO_CHAR(ACT_DATE,'DD-MON-YYYY') <= ldate;
ELSE
PR_SCOPE := '0';
TC_VALUE := 0;
TR_VALUE := 0;
END IF;
SELECT MAX(SCOPE) INTO P_SCOPE FROM V_PRODUCTION_SCOPE WHERE SPNO = SP AND PROCESS ='Phase III';
IF P_SCOPE IS NOT NULL and P_SCOPE <> 'null' AND P_SCOPE <> '0' THEN
SELECT NVL(ROUND((NVL(SUM(ACHIEVED),0) / P_SCOPE) * 100,2),0) INTO P3_VALUE FROM V_PRODUCTION_INFO WHERE SPNO = SP AND
STAGE = 'Phase III' AND TO_CHAR(ACT_DATE,'DD-MON-YYYY') <= ldate;
ELSE
P3_VALUE := 0;
END IF;
SELECT COUNT(DISTINCT PLANFIELD) INTO FQ_VALUE FROM BEWAG_MASTER WHERE SPNO = SP;
IF FQ_VALUE IS NOT NULL AND FQ_VALUE <> 'null' AND FQ_VALUE <> '0' THEN
SELECT COUNT(DISTINCT PLANFIELD) INTO F_VALUE FROM FQA_ACCEPTANCE WHERE SPNUMBER = SP;
FQA_VALUE := ROUND((F_VALUE / FQ_VALUE) * 100,2);
ELSE
FQA_VALUE := 0;
END IF;
IF SP <> 'null' THEN
SELECT MAX(PLANNED_DATE) INTO DU_DATE FROM SP_COMPLETION_DATE WHERE SPNUMBER = SP;
IF DU_DATE IS NULL THEN
DU_DATE := '';
END IF;
END IF;
INSERT INTO PRODUCTION_STATUS(PRODN_DATE,SPNUMBER,PRODN_SCOPE,PREPRODN_STATUS,TEMPPRODN_STATUS,TRASSEPRODN_STATUS,PIIIPRODN_STATUS,FQAPRODN_STATUS,DUE_DATE) VALUES(ldate,SP,PR_SCOPE,P_VALUE,TC_VALUE,TR_VALUE,P3_VALUE,FQA_VALUE,DU_DATE);
COMMIT;
END LOOP;
CLOSE CUR_SPNO;
END P_Y_PROGRESS;

With all due respect, you're having a laugh if you think we're going to wade through your spaghetti code and not very well explained business requirement. We do this for fun. Having said that, maximum respect to anyone who does have the patience to figure it out.
In the meanwhile, I offer you this possible solution, which being pure SQL is I think easy to understand and doesn't need commenting (unlike some code I could mention).
Cheers, APC
CREATE TABLE x1 (plan_no number, plan_field number, plan_index number
                  , index_id number, status VARCHAR2(10))
INSERT INTO x1 values (1, 1, 1, 1, 'OPEN')
INSERT INTO x1 values (1, 1, 1, 2, 'OPEN')
INSERT INTO x1 values (1, 1, 1, 3, 'OPEN')
INSERT INTO x1 values (1, 1, 1, 4, 'OPEN')
INSERT INTO x1 values (1, 1, 1, 5, 'OPEN')
INSERT INTO x1 values (1, 1, 1, 6, 'OPEN')
INSERT INTO x1 values (1, 1, 2, 1, 'OPEN')
INSERT INTO x1 values (1, 1, 2, 2, 'CLOSED')
INSERT INTO x1 values (1, 1, 2, 3, 'CLOSED')
INSERT INTO x1 values (1, 1, 2, 4, 'CLOSED')
INSERT INTO x1 values (1, 1, 2, 5, 'CLOSED')
INSERT INTO x1 values (1, 3, 1, 1, 'CLOSED')
INSERT INTO x1 values (1, 3, 1, 2, 'CLOSED')
INSERT INTO x1 values (1, 4, 1, 1, 'OPEN')
INSERT INTO x1 values (1, 4, 1, 2, 'CLOSED')
INSERT INTO x1 values (1, 4, 2, 1, 'OPEN')
INSERT INTO x1 values (1, 4, 2, 2, 'CLOSED')
INSERT INTO x1 values (1, 4, 2, 3, 'OPEN')
INSERT INTO x1 values (1, 4, 2, 4, 'CLOSED')
SELECT plan_no, plan_field, plan_index, 100 * (tot_cl/tot_idx) as pct_closed FROM (
SELECT plan_no, plan_field, plan_index, count(*) AS tot_idx, sum(decode(status, 'CLOSED', 1, 0)) AS tot_cl
FROM   x1
GROUP BY plan_no, plan_field, plan_index )
   PLAN_NO PLAN_FIELD PLAN_INDEX PCT_CLOSED
         1          1          1          0
         1          1          2         80
         1          3          1        100
         1          4          1         50
         1          4          2         50
5 rows selected.

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.

While installing windows with bootcamp error showing "A require Cd/Drive driver is missing" in the middle of installation. Please help what to do ??

While installing windows with bootcamp error showing "A require Cd/Drive driver is missing" in the middle of installation m not able to install windows on my mac . Please help what to do ??

What DVD drive are you using?

HT204382 Jfiles, still getting error message that required codec is not available -- Help!

Just installed Telestream to open wmv files, but still getting error message that required codec is not available -- Help!

I'm still getting that same message how did you fix it? i installed the wmv player or Flip4Mac (i'm unsure if thats the same program), but even after i am still getting the pop up saying " The movie ____.avi" can't be opened. What am i doing wrong?

Cannot download Fallensword Helper Scripts. Getting "Script could not be installed Error: Failed to @require json2.js"

Hello, I did a drive eraser and reinstalled everything(to clean up computer), then when I got to reinstalling firefox I had a problem. I play a game called Fallensword. It has a script called Fallenswordhelper. So I installed GreaseMonkey, then when I tried to install scripts it said "Script could not be installed Error: Failed to @require json2.js". I have done this to my computer every year since I started using computers. I have never had this before. Please help me get a fix for this, for I google it and cannot find a answer.

This was a indeed a problem in Greasemonkey 0.9.0. It has been resolved in Greasemonkey 0.9.1, as can bee seen at [https://github.com/greasemonkey/greasemonkey/issues/closed#issue/1262 their site]:

Pricing Error (help required)

Is there any routine which includes the tax value in R100 as well ,currently the problem is that the 100% Discount condition is only including the net price
And in the pricing procedure i m using two prices one price of tax calculation and the other is consumer price first i calculate the tax from base price then i deduct the tax from the consumer price this calculation is working fine through standard routines.
Only problem is that when i enter NRAB and R100 at end it only includes Net Value which is calculated through Formual using condition type NTPS
Kindly Help Required ASAP

Hi ABAPAR,
I m not getting the exact picture of what U desired, from your pricing procedure.
As you r using multiple free goods condition type...anyway.
If you wanted to make the calculated tax "amount + "as a basis for the calculation of particular condition type.you can use the functionality of subtotal.
That mean go and assign one subtotal no. to subtotal column in your pricing procedur to all condition type to which you wanted to make as a basis for furthur calculation.(this settings allow the total of all values in one subtotal).
And finally U can assign this subtotal no.to the "alt.cal.B.value "of pricing procedure for the calculation of particular condition type.
If you r using any std condion type that come up with certain routine like NRAB or somthing...possibly that will not allow u to do this settings. so in this case clear your free goods requirement or use any new condition type. i.e . Z creation.
consult your SD consultant.
karnesh

Help required urgent error 5161

Hi,
I have mapping where the i have deployed earlier successfully.Now when i try to deploy again,it says RTC 5161 error.please help me in this matter.I amost completed my work and now i am getting this.
your suggestions are highly appreciated.
thank you.

Robert is right. Please let me show more detail action: specailly, how to 'Run OWB from command line', which may cause confusion. when I use shortcut and run command line(C:\owb_home\bin\launch.exe C:\owb_home\owb\bin\admin ..\win32\owb.cl), the OWB client can be launch and log file can generate, but you got nothing.
The correct 'command line' should be as follow:
1 cd $OWB_HOME\owb\bin\win32
2 C:\OWB_HOME\owb\bin\win32\owbclient.bat 1>c:\temp\owb.log 2>c:\temp\owb_err.log
3 re-deploy to generate the error message
4 check the ORA- in the log file.
......

Error importing CD (required folder cannot be found)

iTunes 10.6, running on a Mac Mini with OSX 10.6.8
Hi all,
A bit of backstory. Been using iTunes to manage my music collection for over 8 years. At one point, I moved my music off of a primary disk to an external disk, although perhaps oddly set up, in that the 'iTunes Music Library.xml' file was still local (under ~User/Music), and just the music files were external (under /Volumes/Media/Music). When the iTunes Media directory structure upgrade happened, the only way I could access my music was to put a soft link from the Music folder to my external drive.
For awhile now, I've been in a state where for the most part, I can listen to all of my music, but when I try to import a CD, I get the 'required folder cannot be found' error.
Help! Do I have to rebuild my file somehow? Edit the xml file directly?
Thanks so much.
I'm happy to provide more information, such as the xml file, directory listings, etc.. I'm just not sure what's helpful.

I have the same problem. I recently moved my music from a Vista PC to a new Laptop with an external CD drive. It will copy one song from the CD and it will show in the Music file and then I get the message ' Error importing a CD - Folder not found'. I must unplug the CD drive and plug it back in. I have seen no fix for this problem.

Error 9672 help required

Similar Messages

Maybe you are looking for