Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110

eth0      Link encap:Ethernet  HWaddr 00:15:17:F7:81:53 
          inet addr:192.1.1.11  Bcast:192.1.1.255  Mask:255.255.255.0
          inet6 addr: fe80::215:17ff:fef7:8153/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:220 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 b)  TX bytes:15868 (15.4 KiB)
          Memory:dfcc0000-dfce0000
eth1      Link encap:Ethernet  HWaddr B8:AC:6F:92:C2:0C 
          inet addr:192.1.1.9  Bcast:192.1.1.255  Mask:255.255.255.0
          inet6 addr: fe80::baac:6fff:fe92:c20c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:263812 errors:0 dropped:0 overruns:0 frame:0
          TX packets:58 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:18959341 (18.0 MiB)  TX bytes:9476 (9.2 KiB)
          Interrupt:169 Memory:dfbf0000-dfc00000
lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:1393 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1393 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4035655 (3.8 MiB)  TX bytes:4035655 (3.8 MiB)Any help please. I am a first time Linux user.
Thanks
A/A

This looks like a follow up of Re: Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110
Can you give more details what you are trying to do or trying to accomplish. Where are you trying to ping to?
It could be that you have not defined your gateway or DNS server for name to IP mapping. What is the output of
# netstat -rn
# cat /etc/resolv.conf

Similar Messages

  • Configure dial-up connection in Oracle Enterprise Linux Release 4-3.7.11

    Hallo!I have just finished installing Oracle Enterprise Linux Release 4-3.7.11 so that I can set up Oracle 10g on this Linux platform.
    But first I need to set up a few configurations e.g enable my OEL connect to the internet via a dial-up modem.
    I have used my modem successfully on openSUSE 11.2 and Ubuntu 9.04 but I am unable to use it on OEL.
    My ubuntu configurations are as follows
    Connection Name:ZAIN
    Number:*99#
    APN:ke.celtel.com
    How do I set up dial-up in OEL using the settings above?
    Also,simple commands to restart the OEL such as shutdown -r now are not being found when I type them in the terminal.How can this be so?
    Thanks.

    user11114098 wrote:
    But first I need to set up a few configurations e.g enable my OEL connect to the internet via a dial-up modem.Use wvdialconf to configure access.
    Use wvdial to dial out using the modem, authenticate, and have it launch the pppd daemon for creating an IP connection via the modem.
    If you want to configure manually, you will need to edit the files pap-secrets and chap-sercrets in +/etc/ppp+. Then you also need a unique config file for your connection defined in the +/etc/ppp/peers+ directory.
    These files are fairly simple to edit. The secret files contains your ISP authentication details. The peers file the phone number and account name (from the secret files) to use. wvdialconf should configure this accordingly though.
    There's lot of details available on the web - suggest you google.

  • Oracle Enterprise Linux Release 5  installation on DELL Studio 15

    Hi All,
    Please let me know if any done Oracle Enterprise Linux Release 4 or 5 version installation on Dell Studio 15 or any New laptop of any company.Planing to install oracle application on new laptop of any company.
    Thank You Advance.
    Bestregards,
    Venkat.

    Hi Venkat,
    No, Some of the laptops are not allowing to install linux.Not detecting the HDD and LAN drivers.This is an OS issue (NOT an Oracle E-Business Suite issue).
    Regards,
    Hussein

  • Install Oracle Enterprise Linux

    We have an old workstation (Dell Precision WorkStation 530 with 2.40 GHz Intel Xeon processor, 2 GB RAM, and 3 36-GB hard dirves) and I would like to use it as a test box for Oracle on Linux. I tried to install Oracle Enterprise Linux, but it stuck at the some point every time, either during installing libraries/modules or formatting disk. The place the installation stuck varies. It does give any error message, but the installation just stops there fore hours or days. I tried Oracle Enterprise Linux 4 DVD, Oracle Enterprise Linux 5 DVD, and latest image CDs downloaded form metalink. All have the same issue. That installation starts as normal, then slow down, then freeze. I tried installing Fedora Core on the box using CDs from a Linux book yesterday, but it was successful and worked fine. I am wondering where there are some hardware incompatibility or other issues associated with the box. Any suggestions are greatly appreciated. Thanks.
    George

    Hi, George.
    I think you'll have to determine the motherboard and other periferals in your machine to find out which one is incompatible with OEL. The most probable culprit is the motherboard. Find out which model it is and Google, using the model and the term "Enterprise Linux" (or RHEL or Centos, they are all the same).
    There may be workarounds, if it's indeed an incompatibility issue: settings in the CMOS Setup or advanced parameters for booting the installation -- usually related to the drives (HD, DVD, SATA mode etc) or to P'n'P periferals (USB, for instance).
    Regards,
    Marcio

  • P2V of Oracle Enterprise Linux Release 4 32 Bit

    Hello All, Using VMware Converter can we do P2V of Oracle Enterprise Linux Release 4 32 Bit? -Suresh

    We made some changes and P2V worked. 1. Installed VMware converter on Local Network 2. Started P2V and Selected supported VM Hardware Version to 4 or 7 3. Provided IP address manually and removed the Data disk for migration. 4. Migration was successful

  • How to install Oracle Enterprised Linux on VMware PLayer 4

    Hi Everyone,
    My name is John and I've a small issue which I would like to share with you and hopefully, you are able to assist.
    My laptop is installed with a Window 7 Home Edition operating system and I've installed VMware-player-4.0.2. After reboot, I've also downloaded the file - V29609-01 which is the ISO file of Oracle Enterprise Linux 6.2.
    After that, I've tried to create a Virtual Machine - Oracle Enterprise Linux using the VMware Player by specifying the path and file name of the V29609-01.iso file on my local c:\ drive. I've tried it several times, but every time it just returns the message - 'pxe-e53 no boot filename received' and it just hangs there without proceeding further. Please let me know what I've done wrong and the correct steps and procedures to solve this problem as this is my first time installing a Linux operating system. Thank you for your assistance.
    Regards,
    John

    Hi,
    Can you clarify and explain what is your exact meaning of 'Are you sure you've added the ISO to the VM to boot from?'? Because the following is what I did:
    1.) Click the Create A New Virtual Machine.
    2.) Select the 'Install disc image file (iso):' option and enter the full path of the V29609-01.iso (Oracle Enterprise Linux 6.2) file that I've downloaded from https://edelivery.oracle.com/. But underneath it, that is a message saying - 'Could not detect which operating systems is in this dsic image. You will need to specify which operating system will be installed.'
    3.) Click 'Next'.
    4.) I chose "Linux' under the Guest operating system and chose 'Oracle Enterprise Linux' under the Version drop down.
    5.) Click 'Next'.
    6.) I left the Virtual machine name as 'Oracle Enterprise Linux' and click 'Next'.
    7.) I set the Maximum disk size to 300 GB and have the 'Split virtual disk into multiple files' option selected and click 'Next'.
    8.) I have the 'Power on this virtual machine after creation' checked and click 'Finish'.
    9.) A black screen displayed inside the VMware Player saying:
    'CLIENT MAC ADDR: 00 0C 289 ......
    PXE-E53: No Boot filename received
    PXE-M0F: Exiting Intel PXE ROM.
    Operating System not found
    10.) And the process just hangs there.
    Regards,
    John

  • Error with installing oracle on linux

    hi all
    i tried to install oracle on oracle enterprise linux REL 5 but error occurred like that :
    [oracle@aedc1 ~]$ /mnt/database/runInstaller
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-07-14_02-20-04AM. Please wait ...[oracle@aedc1 ~]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-07-14_02-20-04AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
    at java.lang.ClassLoader$NativeLibrary.load(Native Method)
    at java.lang.ClassLoader.loadLibrary0(Unknown Source)
    at java.lang.ClassLoader.loadLibrary(Unknown Source)
    at java.lang.Runtime.loadLibrary0(Unknown Source)
    at java.lang.System.loadLibrary(Unknown Source)
    at sun.security.action.LoadLibraryAction.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
    at sun.awt.DebugHelper.<clinit>(Unknown Source)
    at java.awt.Component.<clinit>(Unknown Source)
    i want to solve this issue plz

    Hi Ora2009,
    You can refer the following ML doc,
    [Exception java.lang.UnsatisfiedLinkError /jre/1.4.2/lib/i386/libawt.so libXp.so.6 cannot open shared object file No such file or directory occurred on RHEL5/OEL5 for 10.2 x86 or x86_64 install|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=443617.1]
    Thanks,
    Anchorage :)

  • 500 internal server error after installing oracle EBS 12.1.1

    After installing oracle 12,1.1 using rapidwiz . the login page didn't open because of error 500 internal server,
    i run autoconfig for database and i face that error below. how can i unlock that account and how can i connect sqlplus to oracle ebs.
    thanks.
    getConnectionUsingSID() -->
        JDBC URL: jdbc:oracle:thin:@apps.appsdomain:1521:VIS
        Exception occurred: java.sql.SQLException: ORA-28000: the account is locked

    Please see:
    R12: Clone fails with error "ORA-28000 The account is locked" (Doc ID 1114244.1)
    APPS User Account Is Locked While Applying a Patch. Patch Fails With "ORA-28000" (Doc ID 420001.1)
    Thanks,
    Hussein

  • Error when installing Oracle Designer/SCM Release 9.0.2.6 patch

    Hi.
    I am trying to install Oracle Designer/SCM Release 9.0.2.6 patch. I've already installed Oracle 9i Forms and Reports 9.0.2.1.0 (patch 2705870) and 9.0.2.3.0 (patch 3129219). The Oracle Installer version is 2.2.0.18.0, but when I try to install Designer/SCM Release 9.0.2.6.0, which uses Oracle Installer version is 2.3.0.0.0, I get the following error in my hs_err log file:
    An unexpected exception has been detected in native code outside the VM.
    Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0xff12ed8
    Function name=CallWndProcFunc
    Library=C:\WINDOWS\System32\SHW95DLL.DLL
    Current Java thread:
         at sun.awt.windows.WToolkit.eventLoop(Native Method)
         at sun.awt.windows.WToolkit.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Dynamic libraries:
    0x00400000 - 0x00405000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\javaw.exe
    0x77F50000 - 0x77FF7000      C:\WINDOWS\System32\ntdll.dll
    0x77E60000 - 0x77F46000      C:\WINDOWS\system32\kernel32.dll
    0x77DD0000 - 0x77E5D000      C:\WINDOWS\system32\ADVAPI32.dll
    0x78000000 - 0x78086000      C:\WINDOWS\system32\RPCRT4.dll
    0x77D40000 - 0x77DCC000      C:\WINDOWS\system32\USER32.dll
    0x77C70000 - 0x77CB0000      C:\WINDOWS\system32\GDI32.dll
    0x77C10000 - 0x77C63000      C:\WINDOWS\system32\MSVCRT.dll
    0x6D420000 - 0x6D4EE000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\hotspot\jvm.dll
    0x76B40000 - 0x76B6C000      C:\WINDOWS\System32\WINMM.dll
    0x6D220000 - 0x6D227000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\hpi.dll
    0x6D3B0000 - 0x6D3BD000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\verify.dll
    0x6D250000 - 0x6D266000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\java.dll
    0x6D3C0000 - 0x6D3CD000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\zip.dll
    0x6D020000 - 0x6D128000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\awt.dll
    0x73000000 - 0x73023000      C:\WINDOWS\System32\WINSPOOL.DRV
    0x76390000 - 0x763AC000      C:\WINDOWS\System32\IMM32.dll
    0x771B0000 - 0x772D1000      C:\WINDOWS\system32\ole32.dll
    0x6D1E0000 - 0x6D21B000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\fontmanager.dll
    0x5ED00000 - 0x5EDC6000      C:\WINDOWS\System32\OPENGL32.dll
    0x68B20000 - 0x68B3E000      C:\WINDOWS\System32\GLU32.dll
    0x51000000 - 0x51047000      C:\WINDOWS\System32\DDRAW.dll
    0x73BC0000 - 0x73BC6000      C:\WINDOWS\System32\DCIMAN32.dll
    0x10000000 - 0x101CA000      C:\WINDOWS\System32\ialmgicd.dll
    0x0FDB0000 - 0x0FDE0000      C:\WINDOWS\System32\ialmgdev.dll
    0x74720000 - 0x74764000      C:\WINDOWS\System32\MSCTF.dll
    0x0FF10000 - 0x0FF2F000      C:\WINDOWS\System32\SHW95DLL.DLL
    0x0FFB0000 - 0x0FFF1000      C:\WINDOWS\system32\WOW32.dll
    0x75F40000 - 0x75F5F000      C:\WINDOWS\system32\appHelp.dll
    0x773D0000 - 0x77BC2000      C:\WINDOWS\system32\SHELL32.dll
    0x63180000 - 0x631E5000      C:\WINDOWS\system32\SHLWAPI.dll
    0x181D0000 - 0x18271000      C:\WINDOWS\System32\ntvdm.exe
    0x763B0000 - 0x763F5000      C:\WINDOWS\system32\comdlg32.dll
    0x77340000 - 0x773CB000      C:\WINDOWS\system32\COMCTL32.dll
    0x77C00000 - 0x77C07000      C:\WINDOWS\system32\VERSION.dll
    0x75A70000 - 0x75B15000      C:\WINDOWS\system32\USERENV.dll
    0x71950000 - 0x71A34000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.10.0_x-ww_f7fb5805\comctl32.dll
    0x5B430000 - 0x5B440000      C:\WINDOWS\System32\tsappcmp.dll
    0x0FF80000 - 0x0FF9E000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\JavaAccessBridge.dll
    0x6D2C0000 - 0x6D2DB000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.jre\1.3.1.1.0c\1\DataFiles\Expanded\bin\jpeg.dll
    0x189D0000 - 0x189E4000      O:\Oracle Product Downloads\Oracle Developer Suite\Windows\Patches\9i_designer_scm_9026\stage\Components\oracle.swd.oui.core\2.3.0.2.0\1\DataFiles\Expanded\lib\win32\oraInstaller.dll
    0x76C90000 - 0x76CB2000      C:\WINDOWS\system32\imagehlp.dll
    0x6D510000 - 0x6D58D000      C:\WINDOWS\system32\DBGHELP.dll
    0x76BF0000 - 0x76BFB000      C:\WINDOWS\System32\PSAPI.DLL
    Local Time = Wed Nov 05 19:27:05 2003
    Elapsed Time = 44
    # The exception above was detected in native code outside the VM
    # Java VM: Java HotSpot(TM) Client VM (1.3.1_01 mixed mode)
    Please help!
    Thanks,
    Vincent Scorsone
    Phone: 504-908-1087
    Email: [email protected]

    What exactly do you want to do with Designer? You need to install the Designer repository in a Oracle database before you can use Designer.
    I suggest that you read the Repository Installation Guide (installed with the product or on OTN) and then go through the Designer Tutorial on OTN (http://www.oracle.com/technology/products/designer/9i_collateral.htm#tut) to understand some Designer concepts.

  • Error while installing oracle enterprise manager 11g

    Hello,
    I am trying to install Oracle enterprise manager 11g & keep on
    getting following error at install progress stage :
    Error in setting permission of file/directory
    /u01/labuser/Oracle/Middleware/oracle_common/oui/jlib/emocmul.jar
    with 3 options Retry,Ignore & cancel.
    Could anyone guide why i am getting this error & how to fix this problem ?
    Thank-You
    Rahul Shah.

    Hi;
    For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Enterprise Manager which you can get more quick response
    Regard
    Helios

  • ORA-12154 Error After Install of Enterprise Manager

    I have a new new laptop with minimal software installed. Everything was fine and I was able to connect to 4 different Oracle 9i databases.
    This morning I installed Oracle Enterprise Manager (10g) and now I get the dreaded ORA-12154 error.
    I now find a copy of TNSNAMES.ORA in three places. I have copied the correct version to the two new 10G locations and I have verified that all three copies of TNSNAMES.ORA and SQLNET.ORA are correct and identical.
    Do anybody have any idea what else could be wrong?

    I am certain the TNSNAMES.ORA file is fine as it is "pushed" from a central IT department. I have compared it to the one on a second computer (which has only 9i installed) in my office and they are identical.
    I examined the Oracle 9i directories and there was no LISTENER.ORA anywhere. On the 9i only computer the command - C:\>dir listener.ora /s /p executed in a DOS window returned no files.
    Everything was working fine until I installed Enterprise Manager 10g (10.2.0.2.1).
    I have TOAD installed and it connects to both of the 9i development and production databases, so I know the TNSNAMES.ORA is okay.
    It woudl seem that there is a conflict between 10g and 9i Developer/2000.

  • Guide For Installing  Oracle Enterprise Linux in Virtual Box

    Hello,
    Any good tutorial available for installation of Oracle Enterprise Linux in Virtual Box?
    Regards

    Installing Oracle on Virtual box is similar to the one you install on regular Linux box.
    just make sure u have enough memory assigned for VMbox..
    create user, group, directories and change permissions
    change profile
    change all the kernal options listed in install guide and ur good

  • Error While Installing Oracle On Linux Red Hat.

    Hi,
    For the last two days, I am trying to install Oracle 9i on Linux Redhat, but no vail. This is the error I come across--
    "Initializing Java Virtual Machine From /tmp/OraInstall0/jre/bin/jre. Please wait...
    :symbol errno. version GLIBC-2.0 not defined in gile libc.so.6 with link reference (libzip.so) unable to initialize thread: cannot find class java/lang/thread
    Could not create Java VM."
    I hope this forum would help me out.
    Thanks in advance.

    try execute: export LD_ASSUME_KERNEL=2.4.1 before you run ./runInstaller
    Btw try look at http://www.puschitz.com for installation guide.

  • Hyperion errors after installing Oracle Database 11G

    Hello,
    The company I work for has a bunch of Oracle databases available, two which I connect to (use to connect to). I have multiple applications that I use to connect to these databases, Hyperion Interactive Reporting Studio 9.3.1 being one of them. I'm using Windows XP as my client.
    I made the mistake of installing Oracle Database 11G Express Edition and now I cannot connect to any of the database using my applications, but I can connect to the same databases using SQL Developer. When I try connectiing using Hyperion, I get "SQL NATIVE ERROR [12504] SQL MESSAGE [[INTERSOLV][ODBC ORACLE 8 DRIVER][ORACLE 8][ORA-12504; TNS LISTERNER WAS NOT GIVEN THE SERVICE_NAME IN CONNECT DATA".
    When connectiing using other company applications, which use the same database, i get "IM006: [INTERSOLV][ODBC ORACLE 8 DRIVER] DRIVERS SQLSETCONNECTATTRFAILED. UNABLE TO CONNECT TO DATABASE. CHECK USER NAME AND PASSWORD AND TRY AGAIN"
    I'm assuming that I updated a driver or registry setting and I need to know how to reverse . I also copied a tnsnames and listerner from an associates computer and placed it in the same location on my computer, but this has not helped at all, even after rebooting the computer.
    I even double checked and logged onto anothe computer and I can connect to the database using these same applications, so I definetly messed something up locally on my computer.
    Any help is appreciated. Joe.

    Probably you could solve odbc driver issues by removing the PATH entry from XE installation.
    It looks something like:
    Path=C:\oracle\oraclexe\app\oracle\product\11.2.0\server\bin;<remaining paths>
    In system variabels settings, edit PATH to remove the "oraclexe" path and semicolon, leaving only <remaining paths>.
    However, removing it will likely have an affect on XE usage. But that may be preferred over other apps working.
    Edited by: orafad on Oct 12, 2011 2:55 PM

  • Toad Error after installed Oracle Work Flow Builder

    Hi,
    I have using Toad 9.6.1 version. I installed newliy Oracle Work Flow Bulider 10g. After installed when i trying to open Toad it is giving Access Vioalation Error.
    Please advice what may be the reason and how to correct it.
    Thanks

    Hi,
    Did you use exsisiting oracle_home while installing workflow builder? if yes then may be reinstallation of toad is the soluiton.
    Is toad throwing error at startup or when you fire any query? and what is complete error message...
    Thanks,
    JD

Maybe you are looking for