Error after uninstalling the SAP Integration Kit XI 3.0 on Unix

Hi all,
I have uninstalled the SAP Integration Kit XI 3.0 on a single solaris server installation. Uninstall was done exactly as instructed in the manual and everything looked ok.
Now when I try to go to the login page of CMC or InfoView I get an error:
type Status report
message /PartnerPlatformService/service/app/logon.do
description The requested resource (/PartnerPlatformService/service/app/logon.do) is not available.
Is the login page trying to look for the SAP authentication page that was removed ?
Is there some configuration still remaining somewhere that needs to be removed so I get the old login page back ?
Thanks for ideas, Timo

Thanks for pointing to the right direction. I changed the tomcat webapps web.xml file parameter and it was enought to start working again.
   <context-param>
        <param-name>config.logon.service.context</param-name>
        <param-value>/PlatformServices</param-value>
    </context-param>

Similar Messages

  • How to import the transports from the SAP Integration Kit into SAP system

    Hi expert,
    I read the forum "Re: Integration with SAP R/3 to realise i have not done the import of transport but i don't quite understand the statement give by "Sebastian Li".
    "Unpack the SAP Integration Kit zip-file. It contains a transport-folder. Here you'll find a short manual which files you should import.
    Copy the needed files on your sap-system in the correct folders:
    - usr\sap\trans\cofiles
    - usr\sap\trans\data
    Use the transaction STMS.
    Also take care of the sequence of importing. See the manual for details."
    Can some one explain it in more details to me. I have unzip the SAP Integration Kit n in the transport folder got 2 more folder "ansi" and "unicode_compatible". How do i know which 1 to use? Where i should copy this files to?
    Please advice.
    thank you

    Hi Rajesh,
    check this : logon failed. you do not have the necessary rights to design reports
    @Sri

  • How do you update the SAP Integration Kit license?

    When your SAP Integration Kit license has expired, how do you update it?
    For example : In designer, not being able to create OLAP universes on SAP BW anymore.
    Thank you,
    Raphaë

    Hi Ingo
    do you know, I,ve tried to put in the licens key in CMC for int.kit that I got from SAP self and also another from the marketplace page.
    I getting message:
    Currently held license keys (Select a key to see its licensing information)
    License Key Error: Invalid Key : <my key>
    There is no license added for int.kit in CMC right now, do I need to have it?
    Reason to this is that we got some connection error: "The specific module could not be found" and error "WIS 10901"
    This after Infoview and "refresh data"
    From my opinion I would guess that this is licens problem?
    Can you please help us?
    regards Jacob

  • Error with trial Installation of the BusinessObject Integration Kit for SAP

    Hi
    I am using the trial version of Installation of the BusinessObjects Integration Kit for SAP
    while doing the installing it gives me the screen of
    BW Publisher Parameter in which I need to fill the
    Program ID
    gateway host
    gateway service
    Can anyone please let me know where can I get the program id and gateway host and service
    Regards
    JM

    Hi John,
    those depend on you landscape. Take a look here:
    Publishing part 1
    /people/ingo.hilgefort/blog/2008/09/23/businessobjects-and-sap--publishing-of-crystal-reports-part-1-of-3
    Publishing part 2
    /people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-2-of-3
    Publishing part 3
    /people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-3-of-3
    and you can also look into the Installation Guide for the SAP Integration Kit
    Ingo

  • Error using CR 11.5 with dynamic cascading prompts and SAP Integr.Kit XI R2

    Hi,
    we are using the SAP Integration Kit XI R2 (patched up to FP4.3) in order to report SAP BW data (BW 3.5) in Crystal Reports 11.5 (SP 4). In order to access the stored BEx Queries we use either the SAP BW Query or the SAP BW MDX Query Driver (_we DO NOT use any universes_). Everything seems to work fine ex cept when we want to use dynamic cascading LOVs within CR. For example when a user runs a report she/he should select first a customer group (0CUST_GROUP prompt) and then the customer (0DEBITOR). Defining the cascading prompts with dynamic LOVs is no problem in CR and when the report runs (either in CR Designer or in InfoView) both prompts appear. Still when we do a selection for the first prompt (0CUST_GROUP) we get a 0x8004380D error with the text message stating that the system is not able to retrieve the LOV data (I guess for the 0DEBITOR prompt). Please note that we do not get a corba error and no firewalls are activated. We checked the trace files of the page server and found out that there was an error calling the createRowsetCursor function within enginekernel.cpp.
    Any hints on our case will be mostly appreciated. We have the feeling that we are hitting a bug here but maybe we are overseeing something.
    Cheers
    Stratos
    PS: Please note that if we access directly the ODS Object (SAP ODS driver) the dynamic cascading prompts on exactly the same InfoObject (or better their keys in the ODS) work without a problem.

    Hi Stratos
    You can define LOV's in universes but unfortunately you can not use universes based on SAP in Crystal Reports.
    You can define parameters in the Bex query which are passed on to Crystal Reports, so you don't need to define them in the Business Objects tools. Please have a look at the SAP Integration Kit user's guide
    Roland

  • License key dissapears after installation of BO Integration Kit for SAP

    Hello,
    I installed BO Edge 3.1 on Suse Linux Enterprise Server 10 (x86_64). After installation I see the license key for 10 named users in CMCand I could add new users.
    Then I installed the BO Integration Kit for SAP. After this installation the license keys are gone. I could not change the new added user and I can not implement the SAP Authentication. The message is "now valid license key for any concurrent user".
    After Deinstallation of BO Integration Kit for SAP with AddOrRemoveProducts.sh the license key is still gone. I am working with permanent license keys from BO.
    Thanks in advance for your help
    Thomas Windischmann

    Hi,
    in the meantime I solved the problem with support from BO. Although I am using the installation software for BO Edge 3.1 and SAP Integration Kit from the same DVD (BOBJ EDGE BI 3.1 Standard Package, #51035489) there is a inconsistency of libkeydecoder.so between BO Edge installation and SAP Kit installation. After installation of SAP Integration Kit you have to replace this lib with the old lib of BO Edge installation.
    Thomas

  • Core Dump when installing SAP Integration Kit Fix Pack 3.1

    When installing the SAP Integration Kit Fix Pack 3.1 we are getting the following error message..
    boperl.sh[88]: 9961568 Memory Fault (Core Dump)
    This install is being done on AIX after the SP3 was installed.
    Any ideas?
    Thanks,
    Deepti

    DO you install the SP3 full version of the integration Kit?
    Regards,
    Stratos

  • BOE 3.1 and SAP Integration Kits 3.1

    I have installed BOE XIR 2, and DataService 3.0 on this machine (machine A).
    I dont use much on XIR2.
    I build some simple data flow in DataService 3.0, the DataService use the BOE 3.0 that sitting on the other machine (machine B).
    Now I have downloaded new BOE 3.1 and would like to install the SAP Integration Kit 3.1 on mcahine A.
    I have uninstalled BOE XIR 2 from machine A. (I noticed that the Tomcat is still there, can't be uninstalled).
    I have now installed BOE 3.1 on mahcine A. Everyting seem OK, and I point back to use the existing Tomcat.
    Installation finish, no error.
    I now go to Start ->Program ->BOE 3.1 menu, I dont get to see the BOE InfoView and BOE CMS.
    When I click on the Start ->Program ->BOE 3.1 ->Designer, on the Designer logon screen, it is Machine B that appear on the System field. When I change to Machine A manually and logon, I have error message.
    Any idea why the BOE 3.1 InfoView and CMS is missing?
    Why it is machine B appear as the System?
    Why I can't change manually to machine A? It seem like the CMS is missing, but why?
    Please help, need this to demo the client...

    no

  • Default language settings in SAP Integration Kit?

    Hi everybody,
    I've the following problem:
    If I create a report with the SAP Integration Kit (create new report from a query) I get a prompt where I can type in (System Number, User, Password and LANGUAGE). If I now choose as language u201CEnglishu201D and create a report, save it and open it in crystal again, everything is still fine. But if I go to refresh the report, I get a prompt where I can choose the SAP BW and type in the System Number, User and Password but not the LANGUAGE. After the refresh the names of the fields are still in English but the data is now in German (or just the technical names, depends on the language settings in the query).
    For me it looks like that the language settings of the refresh are by default in crystal is set to German, but the software is English. I didnu2019t find any way to change the default language to English or save it in the report.
    I already tried to change the language/regional/keyboard settings of my machine and also tried to change the language in the crystal formula field u201Clanguagecode%u201D.
    But even if I could have a unique change in some system settings, it really will not help me, because I have some queries in German and some in English, depending on the actual BW system.
    If the SAP Integration Kit gives me the possibility to choose the language during the creation of the report it should then remember the choice!?
    Thank you for your help

    Post your question to the Business Object Integration Kits forum

  • Finding  Download for SAP Integration Kit Fix Pack 3.1  / ADAPT01412706

    Hi all,
    by using Crystal Reports 2008 V1 SP3 in combination with SAP Integration Kit 3.1 (SBOP INTEGRATION FOR SAP SOLUTIONS XI 3.1 SP3 WINDOWS (32B)) i get an error during the inportstep of the transports in our BW System.
    This error is descriped and solved in Note 1484086
    (https://websmp130.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3134383430383626)
    Following the Notesteps there is one conclusion using the transport files from the "SAP Integration Kit to FixPack 3.1" . My problem is to  find these named Fix Pack in the download area of the Marketplace.
    An Fix Pack for the SAP Integration Kit itself seems to be not aviable,
    therefore I tried several downloads beginning with:
    Crystal Reports 2008 Fix Pack 3.1 - Click Once
    Crystal Reports 2008 Fix Pack 3.1 - Redist Install
    Crystal Reports 2008 SP3 Fix Pack 3.1
    there are no transportfiles in any of these packages.
    If any from you have some idea where to find the right transport files, please let me know.
    Regards
    Marco

    Hi Marco,
    you can go in Sap Support Portal -> Software Downloads-> BusinessObjects Downloads
    in the left select "Search for Software Downloads" then in "Search Term" input:
    BOBJINTGRSAP03P
    You'll retrieve all available versions of IK SP3 with related fixpacks.
    Regards.
    Roberto.

  • Crystal Reports 10 and SAP Integration Kit

    Hi,
    we have a customer using crystal reports 10. Is it possible to use the SAP Integration Kit for version 10? When installing the Kit (Version XI 3.0) there is an error that we do not use CR 2008.
    Thanks in advice
    Claudia

    Hello Claudia,
    the SAP Integration Kit is always dependent on the product releases. there is a Crystal Reports v 10 and Crystal Enterprise v 10 and a SAP Integration Kit v 10 - but keep in mind that v 10 is already out of support.
    Crystal Reports 2008 requires the SAP Integration Kit XI 3.x and BusinessObjects Enterprise XI 3.x
    Ingo

  • SAP Integration Kit for Crystal Reports

    Hello,
    I read Ingo Hilgefort's blog on BusinessObjects and SAP Part 2.
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    Does the current trial version of crystal reports available from businessobjects.com have this integration kit embedded in it?
    If not, where can i find it?
    Regards,
    Suraj

    hi shenoy,
    SAP Integration Kit
    The SAP integration kit includes drivers to allow connectivity to both R3 and Business Warehouse (BW). In addition, it includes a BW toolbar for Crystal Reports, a specific version of InfoView with Role-based links, sample iViews for Enterprise Portal, and an SDK in Java, COM, or .NET.
    Reporting off R3 Data
    The kit includes two drivers to allow Crystal Reports to connect to the ABAP data dictionary via a remote function call or RFC.
    The Open SQL driver allows the user to connect to SAP R3, displaying the field and the short text description of the tables and fields. The developer can then join the tables accordingly, using the database expert, and then select the relevant fields from which to report. This driver displays not only transparent tables, but includes views, pool tables, cluster tables, ABAP data clusters, and ABAP functions. This driver is geared toward a technical person with functional expertise in joining the tables and then creating the report.
    see link
    http://safari.oreilly.com/0672329174/ch15lev1sec7#X2ludGVybmFsX1RvYz94bWxpZD0wNjcyMzI5MTc0L3BhcnQwMg==
    http://diamond.businessobjects.com/node/18962
    SAP Integration Kit
    The SAP integration kit includes drivers to allow connectivity to both R3 and Business Warehouse (BW). In addition, it includes a BW toolbar for Crystal Reports, a specific version of InfoView with Role-based links, sample iViews for Enterprise Portal, and an SDK in Java, COM, or .NET.
    Reporting off R3 Data
    The kit includes two drivers to allow Crystal Reports to connect to the ABAP data dictionary via a remote function call or RFC.
    The Open SQL driver allows the user to connect to SAP R3, displaying the field and the short text description of the tables and fields. The developer can then join the tables accordingly, using the database expert, and then select the relevant fields from which to report. This driver displays not only transparent tables, but includes views, pool tables, cluster tables, ABAP data clusters, and ABAP functions. This driver is geared toward a technical person with functional expertise in joining the tables and then creating the report.
    Note
    In Crystal Reports, you cannot check the SQL generated using the Show SQL Query option from the Database menu. You can check what Open SQL was generated by using SAP transactions.
    The InfoSet driver allows the user to connect to an existing InfoSet, as defined by SAP transaction SQ02. Alternatively, you can use an existing ABAP query, as defined by SAP transaction SQ01. The benefit of this driver is that the user does not need to know where the data is stored or how to join the tables. Another advantage is that any prompts defined in the InfoSet become parameters in Crystal Reports.
    Note
    To test the InfoSet query, run the InfoSet using your SAP GUI and ensure that it is pulling the required data first before testing it in Crystal Reports.
    Reporting off BW Data
    When reporting off of BW data, the Business Objects' Integration Kit consists of three drivers that are used to pull data.
    The BW Query driver enables the user to connect to a BW query. To enable selection of a query with this driver, Crystal Reports has its own toolbar, as shown in Figure 15.3, and the user needs to select the New Report icon from this toolbar. The user then selects the required BW query, and thus displays a listing of fields available in the query. The user can then create the report using any of those fields. Variables defined in the query automatically become Crystal Reports parameters. After the user has finished building the report, the user saves the report using the BW toolbar. This saves the report to BW, and if the user selects the option to do so, automatically publishes the report to Enterprise.
    Figure 15.3. Crystal Reports after the SAP integration kit is loaded. Note the SAP menu and BW toolbar.
    [View full size image]
    Two new drivers have been added to the XI R2 version of the SAP Integration Kit.
    The MDX query driver supports using Crystal Reports to report off either a SAP BW query or a BW Cube.
    Furthermore, it adds additional functionality by providing support for
    A structure in both the row and column of the BW query
    Hierarchy node and hierarchy node variables
    Free characteristics in a BW query
    The Operational Data Store or ODS driver exposes the ODS tables, so that they look much like the tables of any relational database. However, because of the structure of the objects, it considers them to be like a database stored procedure.
    Connecting to the ODS objects is not performed with the SAP toolbar described here, but rather by selecting the driver from the Data Explorer as shown in Chapter 1, "Creating and Designing Basic Reports." After the user has finished building the report, the report can be saved back to BW and published to Business Objects Enterprise by selecting the Automatically Publish to Enterprise check box, as shown in Figure 15.4.
    Figure 15.4. The additional options after saving a Crystal Report to SAP BW.
    Note
    This publishing method requires some setup. Please refer to the Installation documentation for further details.
    Note
    Both the ODS and MDX drivers require SAP transports to be loaded on the SAP BW system. Please refer to the Installation CD in the Transports folder for further details.
    Using OLAP or Web Intelligence to Report off BW Data
    Included in the SAP Integration Kit are specific drivers to allow OLAP Intelligence and Web Intelligence to report off of SAP BW.
    To connect to a BW cube or query using OLAP Intelligence, open the connection browser and select Add. Select SAP Business Information Warehouse and then proceed to fill in the relevant data, as shown in Figure 15.5.
    Figure 15.5. The information required to connect to a BW cube or query from OLAP Intelligence.
    [View full size image]
    After you are connected, select the query or cube and process to build the report, as described in Chapter 19, "Creating OLAP Intelligence Reports."
    Web Intelligence is new to XI R2 and requires that a universe be built on a BW Cube or Query. However, to aid in this process, Designer builds the universe for you. To do this, select SAP from the list of connects and fill out the required information, as displayed in Figure 15.6.
    Figure 15.6. The information required to connect to a BW cube or query from Web Intelligence.
    [View full size image]
    Finish the remainder of the wizard and when you click OK, Designer generates the Universe for you. It may be necessary to move some of the objects around to suit your needs, but when you are finished, export to Business Objects Enterprise.
    Note
    Only the BW query driver does not require the query be released for external access. The Web Intelligence, OLAP Intelligence, and MDX drivers require the user to release the BW query. To release a query, select the query properties in the BW Query Designer and select the Extended Tab and then check Allow External Access to This Query.
    Viewing the Reports
    Your SAP reports can be viewed either via the SAP integration kit's InfoView or via SAP Enterprise Portal 6. The integration kit provides a number of sample iViews that can be imported by a portal administrator. These include
    Folder iView The folders a user has access to are displayed, and from here a user can run her reports.
    Alert iView Shows all the alerts that have been triggered by Crystal Reports. The user can then click on the report to view the report. The creation of alerts is defined in Chapter 11, "Using Record Selections and Alerts for Interactive Reporting."
    Thumbnail iView This iView displays the Crystal Report as a thumbnail of the report. The user can then click on the thumbnail to run the report.
    Note
    These are sample iViews. The organization can create its own iViews via the provided SDK.
    BusinessObjects InfoView for SAP is a unique version of InfoView designed for integration with SAP BW systems. This integration includes features such as the ability to log on to InfoView using your SAP username and password. Related to authentication is the ability to access your roles and the Crystal Reports saved to these roles. The roles are defined in Enterprise as folders. The user can also schedule reports in the different languages loaded into SAP BW. This creates an instance for each language.
    for remainig info pls use the link
    http://book.soundonair.ru/sams/ch15lev1sec7.html
    very good link for sap integartion kit
    thanks
    karthik
    reward me points if the above info is usefull.
    dont forget

  • SAP Integration kit for BO XIR2 with Crystal XI for BI 7.0 Front end

    Hello Team,
    We are in a little fix.
    We have BOE XIR2, Crystal XI and working with old version of BI front-end 3.5.
    We are upgrading to BI 7.0 frontend, but I am not able to trace out the SAP Integration kit for combination of BOE XIR2, Crystal XI and BI7.0.
    Is such a thing available, If yes can someone send a link to that.
    Regards
    Lalan Kanade

    Hi,
    Thanks for the quick reply
    I could trace this document.  "BusinessObjects Enterprise XI Release 2 SP3 for Windows"
    I checked in "Supported Data Sources for Crystal Rep" section, extract below
    SAP BW Server 3.0b SAP GUI 620 or 640
    SAP BW Server 3.1c SAP GUI 620 or 640
    SAP BW Server 3.5 SAP GUI 640.
    But we are using BW Server 7.0 with GUI 7.1 and that working fine even with BOXIR2 and Crystal XI with Old Front End for BI 3.X.
    But when we are testing with BOXIR2 and Crystal XI with BI New Front End 7.0 its missing components from the query output.
    So the SAP Integration kIt seems old & we need a new Kit which would work with BI New Front End 7.0.
    Any suggestions on that
    Regards
    Lalan

  • Crystal Developer XI without Sap integration kits cant see released Queries

    Hi All!
    When I'm used MS Excel, I can see released SAP BW Queries via SAP OLE DB access. But when I'm used Crystal Developer XI (without Sap integration kits), I can’t see released SAP BW Queries via SAP OLE DB access.
    What's a problem here?
    WBR Artem

    Hi,
    you missing the SAP integration Kit. To conenct to SAP BW you need the SAP Integration Kit installed.
    ingo

  • SAP Integration KIT FOR SAP BO Edge 3.1 Trial

    Hi,
    The SAP Integration Kit 3.1 for BO Enterprise 3.1 is the same for BO Edge 3.1 Trial or there is a specific for BO Edge?
    Because I did the download of BO Edge Trial in the SAP BO area, and install the SAP Integration KIT but the system doesn´t work.
    thanks,
    Rodrigo

    i think that there is a specific Integration Kit for Edge
    good luck
    Amr

Maybe you are looking for