Error appears while switching visibile property of annotations

When I try to set the visibilety property of a cwgraph-annotation in code, and try to run the program, runtime error 458 appears "Variable uses an automation type not used in Visual Basic".
This has  happened directly after an installation of the measurement studio package.
An installation on a different computer seemed to solve this problem, but I need it to be working on a particular computer I use. It's just a normal PC-Laptop using windows XP.
It seems to be some sort of installation problem. It only happend once before, and that was also on a laptop. It couldn't be solved at that time either.
I hope anyone could help me. Thanks in advance.

What is the version of the CWGraph being used? Try downloading the latest update of the ActiveX User interface controls from here and see if the problem still happens.
I hope this helps
Bilal Durrani
NI

Similar Messages

  • White box appears while switching between two desktops

    Hello all,
    Since few weeks I have a problem when I switch between two Desktops. Everytime I switch between them a white box appears in the left corner of my screen (see screenshot).

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Error appearing while transferring products from CRM to R/3.

    Hi All,
    I am facing a problem in CRM system while transferring products from CRM to R/3. System is throwing a message "Exception condition NO_STRUCT_DEFINITION raised" and product transfer is not happening.
    Please suggest some solution.
    Thanks & regards,
    Rupam.

    Hi Arup,
    Thanks for your assistance once again.
    I have checked the 'CRMRFCPAR' table entries in R/3 system. One entry with 'Send XML=M' is present in that table.
    No error Bdoc exists in system, the existing Bdocs are showing as successfully processed in the transaction 'SMW01', The queue name corresponding to the Bdoc is 'CRM_PRODUCT_IP'.
    I have also checked the transaction 'GENSTATUS' .There is no object with status red, instead of that two objects are existing with green status.
    Can you please tell me how to verify, whether parent object ('DNL_CUST_PROD0') has been successfully loaded or not?????
    Eagerly waiting for your valuable suggetions.
    Thanks & regards,
    Rupam.
    Edited by: rupamsap on Mar 19, 2010 9:46 AM

  • Error appears while rendering the form in Workspace ES

    Hai,
    While rendering the form(.xdp) in Workspace ES, once i click the Process Card, i get an error as:
    "An error occurred creating the form (task 1202, form 0). (ALC-WKS-007-040)"
    I could not understand what will be the cause of the error. Could anyone suggest how to resolve the same?
    -Aswani

    Hi,
    These logs states that FormDataIntegration is erroring out.
    <Nov 24, 2009 2:58:57 PM IST> <Error> <com.adobe.livecycle.formdataintegration.client.ImportFormDataException> <BEA-000000> <ALC-FDI-001-305: Operation aborted: malformed PDF or data.>
    <Nov 24, 2009 2:58:57 PM IST> <Error> <com.adobe.idp.workflow.dsc.invoker.WorkflowDSCInvoker> <BEA-000000> <An exception was thrown with name com.adobe.livecycle.formdataintegration.client.ImportFormDataException message:Operation aborted: malformed PDF or data. while invoking service FormDataIntegration and operation importData and no fault routes were found to be configured.>
    There would be a .log file also. That would be more descriptive.
    Thanks

  • Blue White Screen Appeared While Switching Account

    I was trying to go to another account then all of a sudden the whole screen went bright and blue. Does anyone know how to fix that?
    I've checked the Display option in Universal Access; it's on Black on White and Enhance Contrast is set to Normal.
    Thanks in advance.

    Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
    You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them.
     Cheers! DALE

  • While trying to change a BOM with transaction CS02, a runtime error appears

    While trying to change a BOM with transaction CS02, a runtime error appears.
    In intial screen he entered material ,plant BOM usage and date valid from  after executed then id displayed item list in that he wantu2019s delete one item, he has been deleted selected item after that when he was saving he is getting runtime error
    Developer trace
    ABAP Program SAPLKED1_WRITE_CE4_BPS1                 .
    Source LKED1_WRITE_CE4_BPS1U01                  Line 30.
    Error Code SAPSQL_ARRAY_INSERT_DUPREC.
    Module  $Id: //bas/640_REL/src/krn/runt/absapsql.c#17 $ SAP.
    Function HandleRsqlErrors Line 775.
    RABAX: level LEV_RX_STDERR completed.
    RABAX: level LEV_RX_RFC_ERROR entered.
    RABAX: level LEV_RX_RFC_ERROR completed.
    RABAX: level LEV_RX_RFC_CLOSE entered.
    RABAX: level LEV_RX_RFC_CLOSE completed.
    RABAX: level LEV_RX_IMC_ERROR entered.
    RABAX: level LEV_RX_IMC_ERROR completed.
    RABAX: level LEV_RX_DATASET_CLOSE entered.
    RABAX: level LEV_RX_DATASET_CLOSE completed.
    RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    RABAX: level LEV_RX_ERROR_SAVE entered.
    RABAX: level LEV_RX_ERROR_SAVE completed.
    RABAX: level LEV_RX_ERROR_TPDA entered.
    RABAX: level LEV_RX_ERROR_TPDA completed.
    RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    RABAX: level LEV_RX_END entered.
    RABAX: level LEV_RX_END completed.
    RABAX: end RX_RFC
    In sm21
    Perform rollback
    Run-time error "SAPSQL_ARRAY_INSERT_DUPREC" occurred
         Short dump "090618 110101 donalda 11557 " generated
    Runtime Error          SAPSQL_ARRAY_INSERT_DUPREC
    Exception              CX_SY_OPEN_SQL_DB
           Occurred on     18.06.2009 at   11:01:01
    The ABAP/4 Open SQL array insert results in duplicate database records.
    What happened?
    Error in ABAP application program.
    The current ABAP program "SAPLKED1_WRITE_CE4_BPS1" had to be terminated because
    one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    What can you do?
    Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion
    date.
    Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
    neither
    caught nor passed along using a RAISING clause, in the procedure
    "RKE_WRITE_CE4__BPS1" "(FUNCTION)"
    Since the caller of the procedure could not have expected this exception
    to occur, the running program was terminated.
    The reason for the exception is:
    If you use an ABAP/4 Open SQL array insert to insert a record in
    the database and that record already exists with the same key,
    this results in a termination.
    (With an ABAP/4 Open SQL single record insert in the same error
    situation, processing does not terminate, but SY-SUBRC is set to 4.)
    How to correct the error
    The exception must either be prevented, caught within the procedure
    "RKE_WRITE_CE4__BPS1"
    "(FUNCTION)", or declared in the procedure's RAISING clause.
    To prevent the exception, note the following:
    Use an ABAP/4 Open SQL array insert only if you are sure that none of
    the records passed already exists in the database.
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "SAPSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC
    "SAPLKED1_WRITE_CE4_BPS1" or "LKED1_WRITE_CE4_BPS1U01"
    "RKE_WRITE_CE4__BPS1"
    If you cannot solve the problem yourself, please send the
    following documents to SAP:
    1. A hard copy print describing the problem.
       To obtain this, select the "Print" function on the current screen.
    2. A suitable hardcopy prinout of the system log.
       To obtain this, call the system log with Transaction SM21
       and select the "Print" function to print out the relevant
       part.
    3. If the programs are your own programs or modified SAP programs,
       supply the source code.
       To do this, you can either use the "PRINT" command in the editor or
       print the programs using the report RSINCL00.
    4. Details regarding the conditions under which the error occurred
       or which actions and input led to the error.

    Hi ,
    you are getting beacuse u are trying to do mass update to database.
    Please check that below note are applicable to your system.
    Note 453313 - DBIF_RSQL_ERROR_INTERNAL for mass insert
    Note 869534 - AFS MRP doesn't work properly with all BOM item categories
    Thanks Rishi Abrol

  • Error while deploying an application on weblogic 12c. An error occurred while reading the deployment descriptor. The error was: Error processing annotations

    Anyone please help me solve this error. I am trying to deploy an application on weblogic 12c  i am getting an error but the same application gets successfully deployed on weblogic 11g. The error is
    An error occurred during activation of changes, please see the log for details.
    Exception preparing module: EJBModule(gsCallbackAdapterLGTX-ejb.jar) An error occurred while reading the deployment descriptor. The error was: Error processing annotations: .
    [EJB:015001]Unable to link class com.aep.gridsmart.adapters.lgtx.buslogic.deliver.xform.AdapterTransfomerDeliverSession in Jar /appl/oracle/middleware/WLS/12.1.1.0/user_projects/domains/Gridsmart/servers/ManagedServer1/tmp/_WL_user/gsCallbackAdapterLGTX/34vz4d/gsCallbackAdapterLGTX-ejb.jar : java.lang.NoClassDefFoundError: com/aep/gridsmart/adapter/deliver/CommonAdapterDeliverBean

    Cotton please let me know what is the mistake i am
    doingThe following path does not exist.
    C:\Sun\AppServer7\domains\domain1\server1\
    applications\j2ee-modules\task_1\WEB-INF\web.xml

  • Error while adding owner property in nw bpc 10.1 unified model

    Hi,
    currently we are working on NW BPC 10.1 unified model.
    while adding owner property in BW system for work status we are getting below error.
    "Characteristic owner is not mapped to any attributes in the SAP HANA model."
    Please suggest us where to add this owner property.
    Regards
    Anitha p.

    Hi Gregor,
    Thanks for your reply.
    we applied that note.
    We have few doubts while creating work status and BPF.
    Our dimension is /ERP/COSTCNTR, so we have added ZPERF and ZREV attributes in ZCOSTCNTR and we have implemented BADI BADI_RSBPCB_SETUSER (enhancement spot RSBPCB_SETUSER).
    My doubt is while creating ZCOSTCNTR infoobject do I need to take a copy of /ERP/COSTCNTR? I am getting short dump while doing this.
    Regards
    Anitha

  • HT204291 at times error 6722 appears while connecting to airplay device "apple tv"

    at times error 6722 appears while connecting to airplay device "apple tv".  i have restarted the apple tv several times but it keeps doing the same thing, at times the pictures appears without sound from my sound system. what is the  problem, my apple tv and macbook pro is new?

    As an update, tried to connect from a Macbook Pro with an older ITunes and all devices show up, connect and work fine.

  • Hi this message appears after 2 hours downloading Mavericks : an error occurred while extracting files from the package "mzps4135638417199433253.pkg"

    Hi this message appears after 2 hours downloading Mavericks in App Store :
    an error occurred while extracting files from the package "mzps4135638417199433253.pkg"
    Same with "CMD + R"
    Help...

    It sounds to me like your Internal Hard Drive is failing.
    I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
    The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
    Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
    Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data.

  • Stacked on searching text. I ve downloaded ios 8.0.1 but, unable to install"an error occurred  while installing message is appearing. What should I do to fix it.

    I ve iPhone 5s. Which is on version 7.1.2.  The network is stacked on searching text. Even if I removed the sim. The usual "no sim" text is not there. It shows "searching..."  .I ve downloaded ios 8.0.1 on the same phone. but, unable to install  "an error occurred  while installing message is appearing. What should I do to fix it?

    in this recent thread I can't install ios 8.0.1 , our friend bobsuefert says:
    "Be glad you can't install IOS 8.0.1 it's been withdrawn already. It caused more problems then it fixed."
    Did you mean " stuck " on searching... ??
    I will ask our Hosts to move this question to Using iPhone where you will likely get a rapid response.
    CCC

  • HT1222 when I Clicked to update, appear this message: An error occurred while installing the updates.(103)

    when I Clicked to update iTunes, appear this message: An error occurred while installing the updates.(103)

    Read all 3 pages of this thread:  https://discussions.apple.com/thread/4148868?start=15&tstart=0 for possible solutions. 
    Good luck! 

  • HT2518 When I try using Migration Assistant an error appears on my pc... "An error occurred while preparing your information for transfer."  My mac just continues searching for the pc and yet both are on the same wifi.  Please help!!!

    When I try using Migration Assistant an error appears on my pc... "An error occurred while preparing your information for transfer."  My mac just continues searching for the pc and yet both are on the same wifi.  I'm not getting anywhere!  Please help!!!

    Simple...
    http://www.apple.com/uk/support/mac/app-store/contact/

  • Error while switching from price list  while entering  the sales order

    hi
    i am getting this error " App - ont -250271 On line discounting is not allowed ; order type enforces price list"
    while switching from price list column
    I checked the transaction type and it does not have enforce price list check box checked.
    do i have to check some where else?
    Regards
    sudharshan.

    Hello,
    Did you fill lines? and after this you want change price list on the header?
    Check your price list, modifier and qualifier set-up because it seems that there is a problem.
    Regards,
    Luko

  • On a Mac ios10.10, using online service Export PDF, error message appears,"An error occurred while trying to access service."

    Can you advise steps I might take now?  On a Mac ios10.10, using online service Export PDF, error message appears,"An error occurred while trying to access service."

    Hi Ringdoc,
    Please see this document: "Error occurred when trying to access this service" when logging on to Acrobat.com
    Let us know how it goes!
    Best,
    Sara

Maybe you are looking for

  • How can I paste diacritical marks from .pdf to iTunes (or anywhere)?

    hello everyone, I have a question and I don't know exactly where to post this so I cam to macforums for some inspiration (I hope this is the right thread). I have a .pdf with diacritical marks from roman transliteration of Sanskrit and I would like t

  • Paste inside

    Hi, I'd like to have my flash movie happen within the borders of a rounded rectangle. Is this possible in Flash? Is it easier to do with a combination of fireworks/ dreamweaver/ flash? I can do something like it in Fireworks using the "paste inside"

  • How to unlock i pod touch 4

    How to unlock I pod touch gen 4

  • ITunes Search Xcode 4

    I'm in the process of creating an application that involves using a search field to search for and play the result. I had the code working in Xcode 3 using an Applescript application. However with the transistion into an ASOC application didn't fare

  • Organizing Contact Info from Outlook to iphone

    I have outlook and I want to sync the contacts in Outlook to the iphone into two categories. In Outlook you can put contacts into more than one folder. Example: Personal and Business. Is there a way to sync the contacts into the iphone where they are