Error Building LW 2010 Distribution Kit

I get the following error when trying to build my distribution kit on a factory test set PC. The same kit will build on my work laptop.
I have found various posts of similar problems building distributions with LW, LV, Test Stand, etc. but none are exactly like this and none of the other solutions has worked.
Ray

Hi rayt52,
Looking at a similar report of this error, found here
http://digital.ni.com/public.nsf/allkb/460D3470477CD3A486256D7100744A4B?OpenDocument
I am wondering if there is a difference in software installed on your machine from your laptop to your test machine. Specifically it looks like the NI Security Update has not been included. There were a couple of knowledgebase articles specific to this particular update indicating its importance, especially for pre CVI 2010 SP1 runtimes.
I am guessing this update is missing on your factory test machine. You can find more information on the mentioned update with these two articles:
http://digital.ni.com/public.nsf/allkb/E42DE5929616F5A08625792100766272?OpenDocument
http://digital.ni.com/public.nsf/allkb/C8EFBD23AFEA96F9862579210077D784
Hopefully that may help get things moving along for you
Regards,
James W.
Applications Engineer
National Instruments

Similar Messages

How do I create CVI 2010 distribution kits silent installation

I need to build CVI/Labwindows distribution kits that will install silently. Options that would be helpful would be things line 'run silent', 'create log file', 'redirect destination target', etc. Is this possible?

This KB article is targeted toward installers for NI products, but also applies to distributions built with NI Development Environments.
http://digital.ni.com/public.nsf/allkb/878FC4C374013ADF8625733D00688F67?OpenDocument
Also try running setup.exe /h for more help.
National Instruments
Product Support Engineer

The Distribution Kit Builder is Looking for the NI Variable Engine in an old distribution, cant find it and fails to build

I am unable to build a distribution kit because the builder appears to have saved a path to the NI Variable Engine which is not valid. I appear to have the NI Variable Engine installed. There are NI Variable Engine 2.5.0 .xml files loaded in on my computer (See attached for listing of drivers loaded). I do not seem to be able to break CVI's Link to my past installers for getting drivers. I've tried creating a new installer but had the same trouble.
I am running a 64 bit Laptop with Windows 7, building a 32 bit application, running CVI 2010.
Solved!
Go to Solution.
Attachments:
ATAHM Outline.ppt ‏61 KB

The default path is the path to whatever distribution installed NI Variable Engine on your machine. For example, if it was installed from a Driver Disk, the path would probably be D:\. However, from the images you originally posted, I can see that you were being prompted to provide the path to one of your earlier ATAHM distributions. It was looking for it at this path:
c:\Users\chill\Documents\Development\AATAS\ATAHM\distributions_ATAHM\ATAHM Oct 24 2011\
Do you still have that distribution? If you can point it to that distribuiton, you should be good.
Now back to the error you were seeing... Your version of that .NET manifest file matches (except for the version number) Revision A from the Knowledge Base, so you should try replacing it with Revision B (and rename it to NI .NET Framework 2.0 Language Pack x86 Installer {F8ECD2D6-659C-49EB-8454-5F8F7B526FCF}.xml). Make sure you restart CVI after swapping the file. I would expect that to solve your problem. If it doesn't, you'll have to let me know what the new issue is, or if you're somehow still seeing the same error message.
Mert A.
National Instruments

Error building source distribution of a project containing real-time utility VIs

I'm using Labview 8.0.
When building the source distribution of a project I get the following message:
An error occurred while building the following file:
C:\Program Files\National Instruments\LabVIEW 8.0\vi.lib\real-time\rtutility.llb\FPC pad/strip string to size.vi
I'm using "RT reboot controller.vi" and "RT ping controllers.vi" in the project.
Anyone can tell me how to solve the problem?
Is it correct that the filename of a VI contains the character "/"? (FPC pad/strip string to size.vi)

Hi!
You fall in a LabView library error..sorry.
As you have imagined the problem is the slash in the filename and to solve you have to remove it. Go to ..\National Instruments\LabVIEW 8.0\vi.lib\real-time\rtutility.llb and rename the file.
Let me know if this solve.
Ciao
Clara
AE Manager
NI Italy

Error During Installation of a Distribution Kit

While the distribution kit that I have developed will install successfully on Win XP machines, the kit installer produces the same error message on Win 7-32x machines. The installer 's error message, occuring the beginning of the load process, is that it "cannot find the file specified", yet it does not display the file's name - space is blank. Furthemore, as I attempt to install older version distribution kits that were formerly successful, I get the same installation error message on WIn 7 machines. I would appreciate any clues. Are there any event logs that are produced during kit installation that will help identifiy this missing specified file?
The distribution kit was generated with CVI 2009 using a Win 7 -32 bit machine.
Thanks,

Adding more mystery to the distribution kit error discussed above. I have found that the kit installs successfully on Win 7 x64 machines as well as WinXp x32 machines. However, the installation error message still exists on Win 7 x32 machines. On one of these Win 7 x32 machines the error message infers that there is a .dll file that cannot be found, with no mention or hint as to the file's name. Again, any tips would be appreciated.

Error Building Source Distribution

Hello group,
I'm trying to build a Source Distribution in LV8.6.
The application is used to drive a LV USB NI-8451 SPI adapter (among other things), so I have installed the SPI drivers in the default folder "C:\Progran Files\National Instruments\Labview 8.6\resource\objmgr\"
The source files for the project are located on our company's network drive, mapped as "S:\Machine_Plant-Eng\".
But when I try to build the source distribution, it is looking for the files to drive the SPI at "S:\Machine_Plant-Eng\ Progran Files\National Instruments\Labview 8.6\resource\objmgr\"
I don't know how to repoint the Project so it finds the correct files in the correct places.
Thanks,
Mike

check the "installer source location" under "additional Installers" in the "installer properites" and browse to cate the "S:\" drive (the complete path)
Regards
Guru (CLA)

Is there a way to not include the 64-bit NI drivers in the distribution kit?

Hi,
I have an application I distribute that depends on a third party 32-bit only drivers. Or in other words, the application is not going to be installed on a 64-bit system. Is there a way, when including the NI drivers in the distribution kit, to only include the 32-bit versions of the drivers? Doing so should reduce the overly bloated size of the installer by eliminating a large number of files that are not going to be needed. I'm running CVI 2010.
Thanks.

Hi tstanley,
I've checked into this and I'm afraid that the when you build a distribution, you can only choose different parts of the driver that are installed, not whether 32 or 64 bit driver versions are installed. For example, the entire NI-DAQmx driver is composed from NI-DAQmx Application Development Support 9.2.3, NI-DAQmx Core Runtime 9.2.3, and NI-DAQmx MAX Configuration Support 9.2.3. If you are using the NI-DAQmx driver to talk to your hardware, you must include the NI-DAQmx Core Runtime 9.2.3, but the other two parts are optional (as you may not need to use MAX for your application or some of the LabVIEW VIs in the Application Development Support). You can choose each of these parts of the driver in the Drivers & Components tab of the Edit Installer window.
Regards,
Shawn S. | NIC
Instrument Driver/IVI PSE
National Instruments

Regarding po error:buiding default account distribution and please wait....

hi ,
i 'll appreciate if any one can help me in this:
we have applied patches to our system here OAPPS 11.03,after this whenever i go to create purchase orders or requisitions ..shipment and then distribution ,i am getting error that "BUILDING DEFAULT ACCOUNT DISTRIBUTION AND PLEASE WAIT..." but i don't get values for charge,budget,accrual and variance accounts on distribution screen.i checked the wfstatus.sql(account generator workflow file) and run that by giving item_key and item_type for PO,i didn't get any output i.e no rows selected for every activities.Then i used trace on and read the trace file in which i saw one error ORA:00936 which means missing exp(i think) and one wrong sql statement is appearing in trace file.it has comma before from clause..i am not able to understand why is it happening?if any one knows about this then please let me know...is it workflow problem or something else?
thanks in anticipation

Muthu,
Thanks for the quick reply.
Please find below the example:
PO item qty - 100
Cost distribution:
Line 1 - 50
Line 2 - 30
Line 3 - 20
Now the PO has been ordered. PO in backend is showing three account assignments.
After that, I have deleted the fiirst 2 account assignments (1 & 2).
Now the PO will show like:
PO item qty - 100
Cost distribution:
Line 1 - 50 (deleted)
Line 2 - 30 (deleted)
Line 3 - 20
Now the Po item qty and account assignment qty are not same. In this it should give an error. But I am still able to order the PO. When the PO has been transfered to backend, I could see only one account assignment in ME23N but the PO item qty is showing there. Because of that I could able to process confirmation and invoice.
Now, if I change the qty of this specific item, then the new qty is getting updated in teh account assignment tab against the third item.
Rather, if I try to add another item to the PO, then at that time it is giving the error messasge: Sum of quantities > xxx < sum of total quantities.
Till invoice has been posted, it is not giving the error message.
Thanks,
SS

I want to install Distribution kit Created in cvi 5.5 with sql toolkit 2

I want to install Distribution kit with CVI runtime created in CVI5.5 using sql toolkit 2. While installing Distribution in new PC the sql error is showing and it is not communication to MySQL database. In every pc I have to install Labwindows/CVI. Some to help regarding this.
Regards
Anilkumar

Hello,
There is a workaround posted for this error on the following threads:
http://social.technet.microsoft.com/Forums/es-ES/ace2d644-dc82-424a-a608-4b4dc21065d4/setup-closed-with-exit-code-0x84c40013-silent-install-error-sql-server-2012-express-management?forum=sqlexpress
http://social.msdn.microsoft.com/Forums/sqlserver/es-ES/0f5460d5-113f-4976-a43a-d2a7fdb7e304/sql-server-2008-developer-edition-install-fail-due-to-net-framework-35-missing?forum=sqlsetupandupgrade
http://connect.microsoft.com/VisualStudio/feedback/details/472540/microsoft-sql-server-refuses-to-install
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Error building jack [FIXED]

I'm trying to build jack-audio-connection-kit from source to enable support for freebob, but the build keeps failing with undefined references because its looking for libFLAC.so.7
I have flac-1.1.4-1 installed.
Here's the relevant output from 'make':
/usr/bin/ld: warning: libFLAC.so.7, needed by /usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so, not found (try using -rpath or -rpath-link)
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_encoder_set_seek_callback'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_encoder_process_interleaved'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_encoder_get_resolved_state_string'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_encoder_set_write_callback'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_encoder_delete'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_decoder_process_single'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_decoder_set_client_data'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_decoder_get_decode_position'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_decoder_set_write_callback'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_decoder_set_error_callback'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_encoder_init'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__StreamDecoderErrorStatusString'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_encoder_set_client_data'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_decoder_set_metadata_callback'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_encoder_set_sample_rate'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_decoder_finish'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_decoder_set_eof_callback'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_decoder_init'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_decoder_set_length_callback'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_encoder_set_bits_per_sample'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_decoder_new'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_decoder_set_seek_callback'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_decoder_set_tell_callback'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_decoder_set_read_callback'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_encoder_set_channels'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_encoder_finish'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_decoder_seek_absolute'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_encoder_new'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_encoder_set_tell_callback'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_decoder_process_until_end_of_metadata'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_decoder_get_state'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/../../../../lib/libsndfile.so: undefined reference to `FLAC__seekable_stream_decoder_delete'
collect2: ld returned 1 exit status
make[2]: *** [jackrec] Error 1
make[2]: Leaving directory `/var/abs/local/jack-audio-connection-kit-svn/src/jack/example-clients'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/abs/local/jack-audio-connection-kit-svn/src/jack'
make: *** [all] Error 2
==> ERROR: Build Failed. Aborting...
I have libFLAC.so.8, and I've tried symlinking it to libFLAC.so.7, but no luck. That kills the first warning line, but everything else is the same.
Any ideas?
Last edited by brucebertrand (2007-03-21 05:56:18)

well...looks like I didn't have libsndfile installed.

Launch program before distribution kit installation

When creating a distribution kit, there is an option to launch an application
after installation.
I would like to launch an application BEFORE installation.
Is this possible with the installer?
Specifically, I would like to run a program to save the configuration
files from the previous installation (which may have been modified
by the user) before allowing the installation of the new software to proceed.
Thanks in advance,
Marty O.
Solved!
Go to Solution.

Marty,
I'm not sure you applied exactly what Mert described.
You shouldn't have put a file into the distribution kit.
That file, I guess, is what you referred as "old config file" in your message. That file, being a part of the installation, is subject to removal by the uninstaller. This is expected behavior.
Instead, you should be creating the file in your executable (using a function like fopen, OpenFile, etc.) upon its first run on that computer.
Of course you need to check first if the file exists.
Hope this helps,
Message Edited by ebalci on 18-01-2010 08:45 AM
S. Eren BALCI
www.aselsan.com.tr

ASKB posting error, period 7 2010 is closed

Hi All,
Fo for the captioned issue , 2010 year is not closed .
When we are tring to close the same through AJAB, we are gettiing teh error, transactions not completely periodically posted.
I got the error '1000xxxx-xxx Depreciation not posted completely'
Now I tried to run ASKB .
I get teh error `period 7 2010 is not open`. Please let me know, how to handle this scenario.As we can no more open 2010 period.
How to ensure 2010 asset year close will be done.
Regards
Rudra

Hello,
Please check the set-up of transaction OADB.
If you have areas assigned to GL indicator 2, 4, 5 and 6 this causes the error.
You need to temporarily set GL indicator for those Areas to 0. Then run AJAB. You will not encounter any more error regarding "not periodically posted". After you run AJAB, you may set the indicator back.
Thanks!
Jhero

"Unable to read file" error in Excel 2010 when downloading .xls file from IE11

We have lots of reports that have links for our users to be able to download report results in Excel format. We accomplish this by using the Excel mime type in our .asp pages. Sporadically, we are seeing "Unable to read file" errors in Excel 2010
after choosing Open from the IE11 save dialog. Choosing Save/Save As and the file will open just fine.
Also, we can sometimes cause the error to occur more frequently by switching windows during the time when the file is downloading.
If the file is opened directly from /Temporary Internet Files then it opens just fine.
Window 7 64-bit
Thanks in advance!

Hi,
I found you replied in a similar thread, did you try the workaround (Reset the IE) that provided there? Did you change a browser to test?
Then, I suggest we use Process Monitor to do further troubleshooting. Please collect all the actions of IE.exe and Excel.exe, and check the if there are some
error message/code during you open XLS file from IE 11.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

I try to download the OS X Mountain Lion, and I keep getting an error saying, "The product distribution file could not be verified. It may be damaged or was not signed." Please Help!

I try to download the OS X Mountain Lion, and I keep getting an error saying, "The product distribution file could not be verified. It may be damaged or was not signed." Please Help!

If you have Intego VirusBarrier X6 installed
1. Open /Applications/VirusBarrier X6.
2. Click on the "Surf" button.
3. Click on the "Ad Banner Filter" tab.
4. Click "OFF" next to "Banner advertisement filter".
5. Start the computer in Safe Boot, then restart the computer into normal mode.
If don't not have Intego Virus Barrier installed
1. Verify that the date and time is correct on the computer.
2. Safe Boot once, then restart normally, then try downloading again.
3. Try with a different user account if the issue persists
If the issue persists
Install Lion onto an empty partition (internal or external).
Note: You can Use Disk Utility to live partition the internal drive and create a second partition large enough to install Lion.
Start from the clean installation of Lion.
Download Mountain Lion from the Mac App Store. Note that the original startup disk can be set as the destination for Mountain Lion during the installation process.

Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901

Hi Everyone,
I have a program that sends information(analog output) to lab windows cvi in the form of a text file or user input.
The program runs on the computers that I have the field point explorer and lab windows cvi installed on. In order to run the program without always installing labwindows/cvi and field point; I wanted to create an executable file that could be load on another computer.
I used the create distribution kit part of labwindows/cvi to do this.After creating the distribution kit, I then installed it
to another computer.
My user interface appears on the screen, when the user clicks on the exe. file, but no data is sent to the field point module. I know that the data is being read from the user and textfile because in it appears in the uir.
The following are some details about the problem:
1. On another computer without labwindows/cvi and field point explorer not installed - no data is sent to field point module
I know this because a current is being read on the current meter connected to field point module.
My questions are the following:
1. What are the possible reasons for the data not being sent to the field point module?
2. Do I still need to create an iak. (Installing Field point Explorer) file stored on any new computer that I install my created distribution kit file too?
Thankyou very much for any help that you can provide. I greatly appreciate it.
Faen9901

Re: Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901Faen9901,
1) If you do not install FieldPoint Explorer, the FieldPoint Server is not installed so there is nothing on the target computer that knows how to talk to the FieldPoint system.
2) Yes, you need an IAK file on the target computer. Assuming the settings (i.e. com port#) are identical you can simply include the iak file as part of the distribution.
3) You also need to include as part of your installer the file "fplwmgr.dll". If this file is not installed, your program will not be able to access the FieldPoint Server. Alternatively, this file is installed automatically if FieldPoint Explorer detects LabWindows/CVI or Measurement Studio Development versions on the target computer or if you choose to do a custom FieldPoint Explorer installation and
choose to provide LabWindows/CVI support.
Regards,
Aaron

Error Building LW 2010 Distribution Kit

Similar Messages

Maybe you are looking for