Error C+811 while releasing (CK24)

Hi
We have material ledger activated  and we are facing an issue ( ERROR NO C+811) while we release the cost estimation in the middle of the month.
In CKMLPP table we have all lot of material with status not equal to 10 and we have heard that we can reset the material status to 10, so that we can release the cost estimation.
Can any one know the transaction or program, how can we can " RESET MATERIAL PERIOD STATUS" from status 70 to 10.
Do revert.
Regards,

Hi,
Concerning C+811 please have a look at the following information:
You can check with transaction CKMS which movement has been posted before price release has been executed.
The dynamic price will only release the price with transactions which involve material movement.
Unfortunately the dynamic price change has not been implemented for order settlements and invoices.
In table MARV you will see when period shift was executed.
The message C+ 811 is correctly issued if the period status of the material is 30, 40, 50, 60 or 70. This status does not allow price changes to take place. You can view this status in the table CKMLPP.
Please read the attached note 190707 which explains the reason for the message C+811.
The sequence in ML should always be the following:
1) Create and mark cost estimate in period 12/2010 for period 01/2011
2) Do the period shift from period 12/2010 to 01/2011
3) Release the cost estimate
4) Do ML period end closing of period 12/2010
A costing release with CK40N or CK24 also contains a price change of the material. And this price change is not allowed if ML is active with price determination 3 and you already performed transactions to the material during the current period.
From this position, the only possible workarounds at this point are:
- Postponing the costing release to next month
- Reversing transactions and usage of note 574930
- Using the Late Price Change (LTPC) option from note 555176
regards
Waman

Similar Messages

  • Error in VF02 while releasing Billing Document to Accounting

    Hi,
    I am  getting the below error while releasing the billing document to Accounting.Kindly help me in solving the below error.it would be a great help to me.
    Error Message is-
    System error in routine FI_TAX_GET_TAXJCD_LEVELS error code 2 function builder TAX2
    Please do the need ful
    Thanks
    Supriya

    Hi Supriya,
    This is tax jurisdiction error. We assign tax juridiction at three levels
    We give the tax jurisdiction at the time plant definition-Plant level
    We maintain at VK11 t.code SD
    Spro-FA-FA GL-Tax on sales or purchases-define tax jurisdiction-FI Level
    May be you given the tax jurisdiction code at VK11 and you have to give that at FI level also
    Regards
    Surya

  • CATS - error in workflow while releasing the time entry record

    Dear Experts,
    I have setup the configuration for CATS with approval along with workflow. I have maintained the Entry profile and also the Approval steps.
    After entering the time sheet and while releasing the record, system is prompting to enter the user id, I have entered the user id and click OK button, system is producing the following error message:
    An error occurred on starting the workflow
    Message no. LR365
    Diagnosis
    For technical reasons, the system cannot start the SAP Business Workflow.
    Procedure
    Contact your system administrator.
    I have activated the work flow customization using Trnx SWU3.
    Can some one please help me out in solving this problem.
    Thanks in advance,
    Regards,
    Praveen

    I got the solution, we have to maintain the task TS31000004 as general task in the transaction PFTC - 31000004 -> Additional Data -> Agent Assignment -> Maintain, in the next screen GOTO -> Attributes (F8), then Change the task type to General task.
    Also we have to create variant by name WORKFLOW for the program RCATSB01.
    The above has solved my problem.
    Thanks for support.
    Praveen

  • Abap dump error while release Production order

    Dear Gurus,
                          Abap dump error is creating while release production order , pour some light on this issue.
    Regards,
    Kamal

    Hello,
      use transaction ST22 to analyze the error type. There you have the detail of the error message, the program and the line of the ABAP code where the dump was triggered.
    Best regards,
    Andrea

  • Error while releasing a request.

    Hi All,
    I'm facing an error while releasing a request.
    The request contains an ABAP programs along with two INCLUDDE programs as well as a TCode to run the same.
    It is running successfully in dev. server. But, while releasing ths request it shows me the following error :
    " Object REPT ZBAPI_SD_SERV_SALES_ORDER is inactive " ,
    where ZBAPI_SD_SERV_SALES_ORDER is the program name. When I checked out in ABAP editor it shows the program active.
    But, I'm unable to understand why its showing me an inactivation error.
    Guys, help me out in this.

    Hi,
    Check if the INCLUDE program are also ACTIVE. They must be in inactive state. Try activating them and release the request.
    Regards,
    Vikranth

  • Error while releasing Billing document in Subcontract process

    Hi All,
    We are working on Subcontract process as explained below:
    Company code X purchases the component A and sends it to Company code Y on Subcontract. Company codes X and Y belongs to one company using single operative chart of Accounts, Controlling area & operating concern. FI configuration has been maintained in OBYA by treating above company codes Inter company GLs. The component A is sent to company code Y as non value added item. Through 501 movement type, as the component is sent by Company code X.
    Company code Y will add some components (like B,C and charges some expenses as service component D for preparing Finished good) and send this FG to Company code X. For this company code Y will raise a Sales order and followed by MRP run and Production order is created.
    In VA02 of above Sales Order, while entering Item details, where the Settlement rule is asking for PA Transfer structure (in Account assignment tab of Item details) and giving the following error analysis:
    Enter a PA transfer structure
    Message no. KD 044
    Diagnosis
    A PA transfer structure is required for settlement to profitability analysis.
    System Response
    You cannot save this settlement rule.
    Procedure
    Enter a PA transfer structure. To do this, choose the "Parameters" function in the settlement rule. As part of customizing, you can also store a default value for the PA analysis structure, in the settlement profile. The system then uses this default value when you enter a settlement rule.
    In addition to above, another issue has raised while releasing the Billing document after doing PGI. Accounting document is not getting generated and while releasing the Billing document (VF02) it is throwing an error as
    “Enter profitability segment as cost object for Revenue and COGS posting”
    Message no. ZC 001.
    MM,PP,SD & FICO configuration settings maintained:
    1. All required OBYC settings
    2. All cost element and Cost element categories have been maintained
    3. From MM side the system is generating FI & CO documents
    4. Settlement profile in Production Order type is maintained (in KOT2). Allocation structure and PA transfer structure were maintained in (OK06, OK07 & KEI1).  In PA transfer structure we have assigned the required Sources and Value fields and settlement cost elements.
    5. In VKOA condition types KOFI and KOFK were maintained for relevant Customer & Material Account Assignment groups.
    6. Required settings have maintained in OKB9.
    Movement types 501 (sub contract), Received back to Company code X through Movement  type 101. In spite of these settings still we are getting the above mentioned errors.
    Could any one help to provide some inputs on the above issue as early as possible.
    Thanks in advance.

    Hi,
    check  in the sales order line item procurement tab . u can get the requirement type. in SPRo check the requiremnt class for the requirement type. in that requirement clas u will get settrlemnt profile for the sales order. Check that settlemnt profile there u have to maintain the PA transfer structure.
    I think both problem will get solved by maintaing the PA structure..
    You are doing sales order costing right....and i hope it is non vsaluated sales order costing .....
    If help ful please assign points.
    cheers
    Prabhat

  • Vf02 error while releasing a billing doc to accounting

    Hello All,
    I m getting the below mentioned error while releasing a billing doc for a accouting.
    I have checked all the settings in vkoa , ob52 and many more and all are set properly, now m not able to track where actually the prob is.
    error is: No account is specified in item 0000001004
    Message no. F5670
    Diagnosis
    No account was specified for account type "S" in item "0000001004" of the FI/CO document.
    System Response
    The Financial Accounting program cannot process the document.
    Procedure
    A system error has probably occurred in the application you called up. Check the data transferred to item "0000001004" of the FI/CO document.
    Points wil be rewarded
    Thanks,
    SUnny

    Hi,
    Have you checked what is the determination account determination log ? You can do this by entering in VF02 and select from the menu Environment -> Account Determination Analisys -> Revenue Accounts.
    In this log you can see what are posting keys determined from the pricing procedure that should be posted in the FI document and determine very easy in which step the account was not determined.
    After that you can maintain the correct account in VKOA transaction.
    BR,
    Valentin

  • Error while releasing Billing doc to Accounting

    Hi all
    I am gettin the following error while releasing a Billing doc to FI-
    Reconciliation account 240001 or short key 00 is not permitted
    The Billing doc pertains to Export sales and the billing Doc type is Export Invoice. However the Customer Recon A/c is defined as 240000 which is for Domestic Sales. A/c 240001 stands for Export Sales. I am wondering why it is asking for the Export Sales Recon a/c. Does this has something to do with Alternative Recon A/c? Should I set an Alternative Recon A/c and check this? If yes, then should it be defined in SD or FI?
    If any1 has come across this prob, plzz help me.
    Regards

    It is all Fi related, and should be defined by the Fi Consultant.
    But by changing the sort key I think your error can be solved. But I don't exactly know your config settings to recommend any solution.
    Regards
    AK
    Please reward if helpful

  • Error while releasing credit block for the order

    Hi all,
    I am getting follwing error while releasing credit block for the order in VKM1
    Incorrect index structure for table IVBEP1
    Text
    Incorrect index structure for table IVBEP1
    Diagnosis
    Internal error.
    Procedure
    Repeat the transaction.
    If the error occurs and you have a CRM System connected to your SAP R/3 System, the document may have been archived in the CRM System.
    If the error occurs again, inform your system administrator. If the error cannot be corrected, call the SAP Hotline directly. Describe which steps preceeded the error.
    But we are not transfering any orders to CRM.The order can be only seen in R/3
    Please assist
    Regards
    Mano

    Hi
    KIndly check the oss note 505876 in may help you
    Regards
    Damu

  • Error while releasing the billing document to accounting

    Dear All,
    I need your favor to resolve the below issue:
    (System SAP SAP ECC 6.0)
    User is getting the below error message while releasing the billing document to accounting in VF02:
    This is an inter-company billing document (B. type : IV) created in company code 0151. Payer is "IC0186", verified the customer has been setup in 151.
    Corresponding invoice has been successfully posted in company code 0186. (Partner : P0151)
    User is able to post the inter-company document in 0151 using other inter- company partner (ex. IC0183). Therefore, seems that Document type can't be an issue here.
    "Consolidated companies 151 and 186 are different
    Message no. F5080
    Diagnosis
    The number of the affiliated company must be clear for the selected document type for all the line items. In this case at least two different companies or a company in connection with a business partner who does not belong to a company are stated.
    Procedure
    If you selected the correct accounts, you must enter the document with a document type that allows cross-company posting. Otherwise, please correct the entered account."
    Could anyone please suggest what can be the reason, if any configuration is missing. Any help is this regard will be highly appreciated
    Thanks in advance,
    Praveen

    Hi Murali,
    Thanks for the prompt input, however as mentioned document type can't be an issue. Since user is able to post the document (same document type) using other inter-company partner in 0151.
    Thanks,
    Praveen

  • Error while releasing an activity from NWDS

    Hi,
    I am facing the below error while releasing an activity from NWDS - transport view.
    Internal error: the export of SC_CR com.xxx.xxx/xxx_SOFTWARE_COMPONENT#Track_D.118 failed. tcs returncode was 12
    Check in and activate was successfull and in CMS, the activity is shown as activated.
    Please help me to rectify this error.
    Thanks in advance!
    Regards,
    Manchari. N

    Make sure you are connected to NWDI server.
    Also create a new activity for a different component in the same track.
    Below links may be helpful :
    http://wiki.sdn.sap.com/wiki/display/TechTSG/(NWDI)(CMS)PropagationRequestReleaseinTransportViewFails
    NWDI/CBS - release activity in consolidation
    Re: Error on Release of activity (Version set not found!)
    Regards
    Deepak

  • Error while releasing document.

    hi to all,
    while releasing document through vf02 error is coming "tax code does not appear in any g/l account" i have made a new tax code and copied condition type jlst and created new condition type.respective gl is also assigned in ob40.still error is coming.
    i have also checked pricing procedure condition type "from" and "to" its blank.
    please advise.
    thanks and regards
    nakul raj

    Hi,
    The same issue was discussed so many times.  Pl check the below thread.
    tax code x does not appear in G/L account of any item
    Regards,
    P Gomatheeswaran

  • Error while releasing the custom table

    Hi Everyone,
    Modified the User defined include files of a particular table for one of our requirements ( In the function group of the table maintenance generator ) and encountered an error while releasing the request to Quality server, the error disappeared after regenerating the table, this seem to be happening only when the user includes of a table maintenance is introduced/modified, why the release doesnt work when there is any change in the maintenance generator?,
    Rgds,

    Hi Sailatha,
    After modifying, you need to re-generate everything so that, the changes come in effect.
    Trying to release without re-generating will surely result in error.
    Regards,
    Raj

  • Error while releasing the TR

    hi All,
    We are facing an issue while releasing the Transport Request. The error is "No valid TM target found".
    Request your valuable inputs on this.
    thanks in advance
    With Regards,
    Lata

    Hi,
    is it possible for you to import request manualy on OS level. once request created, it will split up in two files, one is R & second is K, import that files manualy in usr/sap/trans/data and usr/sap/trans/cofiles directories respectively and tp import request no. client no. or you can login to the target system client 000 by using stms ->import queue--> clieck on request and import it.
    The error actualy you have given is related to your target system, the request is not able to find out or got the target system.
    Regards,
    kiron.

  • Error while releasing Production order

    Dear experts
    I am getting error "JV Object Type Is Required by JV Parameters for Company '1000'", message =  Message no. GJ118 while releasing Production order. Plz help me on this issue.

    Hi Harish,
    Please refer the below link, hope should be helpful
    Creating a Cost Center

Maybe you are looking for

  • Problems starting Iweb

    I just got an free imac account and I am try to start a website but iweb will not let me use the plus or menu to start a new page

  • Wont play

    i have the shuffle and i have downloaded a cd onto my computer and also got music from i-tunes and when i am i-tunes you see the music but when i try to play the music from the shuffle, i just see a green light and hear nothing, i have restored it, d

  • Ignoring eventDuplicate events under certain circumstances

    Hi All, I am developing a Photoshop cs2 plugin for powerpc mac. My plugin does some processing when the user tries to duplicate channel. I handle by capturing 'eventDuplicate' in my plugin. My problem is 'eventDuplicate' is also trigged when user tri

  • Supplier Bank Account Load API

    Hi all, Can you any one please let me know if there is any API to load Supplier Bank Account Information for existing suppliers. Thanks, Vinod.

  • How to run c program without xcode

    i want to run my c program without using Xcode coz its a huge download,plz help me out I'm new to mac