ERROR: Cannot connect to Host: [SERVER] with user name: [J2EE_ADMIN]

Hello SAP experts
I have started to deploy java SPS on a solution manager system, but has encountered some problems.
I've tried both JSPM and SDM, but get the following error:
Software Component 'ADSSAP'/ 'sap.com'/ 'SAP AG' / '1000 .7.00.16.0.20080610114809''/ '1 ':
Caught exception mens checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Can not connect to Host: [SERVER.domain] with user name: [J2EE_ADMIN]
Check your login information.
Exception is:
com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception vid getInitialContext surgery. No server is running. [Root exception is com.sap.engine.services.
I can not log on Visual admin, with user J2EE_ADMIN, I've checked the user is not locked in the ABAP stack. I have activated SAP * on the JAVA stack, but still can not log on, get this error:
Error while connecting
com.sap.engine.services.security.exceptions.BaseLoginException: Can not create new remote login context.
I've run out of ideas, please some suggestions.

SOLVED - Note 609603

Similar Messages

ERROR:Cannot connect to Host: [MTW02SDEP02] with user name: [Administrator]

Dear All,
When I try to deploy WD application, it gives me this following error and doesn't deploy.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [MTW02SDEP02] with user name: [Administrator] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during getInitialContext operation. No server is running. [Root exception is
Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.
 at com.sap.engine.services.security.remote.login.RemoteLoginContextExt.<init>(RemoteLoginContextExt.java:34)
 at com.sap.engine.services.jndi.implclient.LoginHelper.clientSideLogin(LoginHelper.java:81)
 at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:355)
 ... 38 more
Caused by: com.sap.engine.services.rmi_p4.P4ConnectionException: Possible problem: no available running server node. Check your running servers.
 at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:709)
 at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:697)
 at com.sap.engine.services.rmi_p4.Parser.newRequest(Parser.java:180)
 at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:427)
 ... 1 more
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted

Hi
Try this
1. Is this is the remote server?
 if yes make one entry in host file under C:\WINDOWS\system32\drivers\etc
 format : <server ip> <servername>
 restart NWDS
2.If not then put the Ip address instead of name inside Window--preference --Sap server Check.
3. Put some different UserId and Password who has deployment rights
Best Regards
Satish Kumar

Cannot connect to Host with user name J2EE_ADMIN !!!

Hi all,
this exception when deploy from NWDS04s:
Caught exception while checking the login credentials for SAP J2EE Engine. Cannot connect to Host with user name J2EE_ADMIN
Complete exception:
Result
=> deployment aborted : file:/D:/DOCUME1/VITO1.PAL/LOCALS~1/Temp/temp23237GivaudanNavigation.ear
Aborted: development component 'GivaudanNavigation'/'local'/'LOKAL'/'0.2006.03.20.16.50.48':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [milds2004] with user name: [J2EE_ADMIN] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Access Denied.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted
Any help will be appreciate. Thx.
Vito

Hi Nagarajan,
it seems not good
D:\usr\sap\GVD\DVEBMGS01\SDM\program>sdm changepassword "sdmhome=D:\usr\sap\GVD\
DVEBMGS01\SDM\program" "newpassword=ADMIN1"
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_java_home=D:/j2sdk1.4.2_09
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_64bit_switch=
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_heap_size=128
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_memory_switch=-Xmx128M
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_com="D:/j2sdk1.4.2_09\bin\java" -X
mx128M -jar "D:\usr\sap\GVD\DVEBMGS01\SDM\program\bin\SDM.jar"
D:\usr\sap\GVD\DVEBMGS01\SDM\program>"D:/j2sdk1.4.2_09\bin\java" -Xmx128M -jar
"D:\usr\sap\GVD\DVEBMGS01\SDM\program\bin\SDM.jar" changepassword "sdmhome=D:\u
sr\sap\GVD\DVEBMGS01\SDM\program" "sdmhome=D:\usr\sap\GVD\DVEBMGS01\SDM\program"
"newpassword=ADMIN1"
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addI
viewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBased
SecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator g
enerateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem
startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConf
igurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHiera
rchicalContext lookup
Starting SDM - Software Deployment Manager...
tc/SL/SDM/SDM/sap.com/SAP AG/7.0005.20051006181702.0000
Initializing Network Manager (50117)
Checking if another SDM is running on port 50118
SDM is integrated in JStartupFramework. No repository changing commands are poss
ible.
Processing error. Return code: 4
Could U help, pls? Thx
Vito

Error : Cannot connect to the server temporarily

Hi,
A particular PC is giving an error " cannot connect to the server temporarily", the user is able to login on another PC and no one is able to login to lync 2010 ( internal user ) on this particular PC.
Options tried:
1) Deleted sip folder under app data.
2) Uninstall and reinstall Lync client.
3) checked timezone and srv records.
4) checked ping to FE and director server.
) checked manually adding FE on lync client.
Your inputs/suggestions would of great help.
Thanks.

Is the computer join the domain?
Run the following command to check the automatic configuration is working
Nslookup
>set type=srv
>_sipinternaltls._tcp.<sip domain>.com(for internal user)
>_sip._tls<sip domain>.com(for external user)
If you can ping to FE, please try to sign in with manual configuration.
Lisa Zheng
TechNet Community Support

Logon balancing error:cannot connect to message server (rc=9)

Hi Gurus,
I have just installed SAP GUI 710 in my new system and copied the saplogon.ini file to the respective folder in the new system.
I am now able to see the servers in the logon pad but not able to login .
When i try clicking the logon i am getting the below error message "
"Logon balancing error:cannot connect to message server (rc=9)"
Then further expanding the message i am getting the below message
" Error: Server '?' unknown
Tue Mar 02 11:51:05 2010
Release 710
Component NI (Network Interface), Version 39 rc =-3 , Detail NiErrSet. "
Can you please help me out in accessing the servers.
Regards
Vikram

Check OSS Note : 882741
Summary
Symptom
Some users cannot longer connect SAP GUI to any SAP systems e.g. via SAP Logon, SAPShortcut etc. although they have not made any update to either SAP GUI or SAP system. The attempt to connect to the SAP system ends with error messages like this: "Logon balancing error: could not connect to message server (rc=9)", "service sapmsXXX unknown" or "service sapdp## unknown".
The detailed error information is as follows:
    Error: service 'sap...' unknown
    Component NI (network interface), ...
    rc = -3, module ninti.c, line 463
    Detail NiPGetServByName: service 'sap...' not found
    System Call getservbyname
Other terms
service sapmsXXX unknown,logon balancing,service sapdp## not found error,etc/services,drivers\etc\services,getservbyname, sapdpxx
MSN Messenger 7.5,Connection Troubleshooter
Reason and Prerequisites
The reason for this malfunction is, that the datatype of the registry value HKLM\System\CurrentControlSet\Services\TCPIP\Parameters\DatabasePath
was changed from REG_EXPAND_SZ to REG_SZ.
The following programs are currently known to cause this registry change:
Starting MSN Messenger 7.5 "Connection Troubleshooter" (Build 7.5.0299).
Installation of MSN Messenger 7.0 or MSN Messenger 7.5 with the option automatic scanning and configuration of ports.
This modification prevents the expansion of environment variables in the value of the parameter. Therefore,
      %SystemRoot%\system32\drivers\etc
is not translated to
   c:\windows\system32\drivers\etc
and the services database is not found by the API function getservbyname().
If you have checked the datatype of registry value DatabasePath and it is REG_EXPAND_SZ, apply SAP Note 52959 to check the appropriate settings in the services file.
Solution
Start the registry editor and rename the registry value HKLM\System\CurrentControlSet\Services\TCPIP\Parameters\DatabasePath
Create an Expandable-String Value (REG_EXPAND_SZ) with the same name and value.
If more PCs are affected, you can export the correct value to a .reg file and import the .reg to other PCs.
If you have the same problem although you have not installed Microsoft MSN Messenger 7.5, create a customer message, collect the following information and attach it to the message according to note 541726 or upload it to sapservX (see note 40024):
Scan your workstations for spyware and viruses with up-to-date virus definitions. If you already did that what was the result ?
What software has been installed recently ? (client software, Firewall)
Create a registry export of the following key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstallon the affected and the unaffected PC respectively and attach the two .reg files to the customer message.
Are the users on the affected workstations logged on with administrative credentials (local administrator ) ?
Create an MPS Report Networking and Setup Perf of an affected workstation so that we can check if they use an software in common.
You can download the Networking MPS Reporting Tool at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_Network.exe
You can find a short description about the features of the tool at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_Network_Readme.txt
The Setup Perf MPS Reporting Tool is located at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_SETUPPerf.EXE
Run this report too on identically configured workstations, which are not affected.
If you have already changed back the DatabasePath parameter and if after a while the value was switched back to REG_SZ perform the following steps to help us to identify the reason for this problem:
Switch the datatype back to REG_EXPAND_SZ
Download Regmon from http://www.sysinternals.com on the affected machines
Enable auditing on the affected clients
Modify the settings of the eventlog so that no important entry is deleted!
Open Regedit and highlight HKLM\System\CCS\Services\TCPIP\Parameters
Right-click on "Parameters" and choos "Permissions" and click "Advanced".
Choose "Auditing" and "Add".
Add "Everyone" and select "this key only" under "Apply onto".
Check the boxes "Set Value" and "Delete" and click "OK".
Apply these settings
Start Regmon and apply the correct filter settings:
Press the "magnifying glass" button to stop the monitoring.
Press the rubber button to delete all logged entries.
Go to "Options Filter/Highlight".
Copy the following value to the include field: tcpip\parameters\databasepath and click "Apply".
Start Regmon by pressing the magnifying glass button
Verify that logging starts when you double-click the TCPIP Key in regedit!
If the datatype will be changed again, provide us the output of the monitoring tools.
Solution provided by Microsoft
This issue is said to be fixed as of build 7.5.0311 of MSN messenger.

Error: Cannot connect to fulfillment server. Error: cannot find loan record.

Error: Cannot connect to fulfillment server. Error: cannot find loan record. Definitely connected to internet, authorization correct, etc. Not sure what else to look at.

Is the computer join the domain?
Run the following command to check the automatic configuration is working
Nslookup
>set type=srv
>_sipinternaltls._tcp.<sip domain>.com(for internal user)
>_sip._tls<sip domain>.com(for external user)
If you can ping to FE, please try to sign in with manual configuration.
Lisa Zheng
TechNet Community Support

Error: Cannot connect to NTP server or NTP server is not running - Cisco IPS

This is different scenario here:
I have two Cisco IPS 4260-k9 and both are in production now.
One of the IPSs is configured with NTP and works fines, but another one is not.
When tried to configure when the device is ON and live in production and got the following error,
Error from CLI:
" Error: Cannot connect to NTP server or NTP server is not running "
Error from IME:
" Delivery failed.
err Unaccepable Value - cannot connect to the NTP server or NTP server is not running"
I am able to reach the NTP server, also the same NTP is working fine with other devices....
Am I doing anything wrong?
Please advise

Hi,
Now the error has changed:
Session.connect: java.net.SocketTimeoutException: Read timed out
I have increased the pooling interval to 1 Hr from 1 Min. Waiting for the next pooling interval result.
Guide me if I am heading right.... or anything else needs to be done.
Regards,
Krishna Chauhan

Error: Cannot connect to SFTP server ; channel is not opened

Hi PI Gurus,
Sender SFTP CC is getting error:
Error: Cannot connect to SFTP server. channel is not opened. (Software version: 3.0.23)
Can anyone guide me, what this error means 'channel is not opened'
Is the issue is at SFTP server location?
Regards,
Krishna Chauhan

Hi,
Now the error has changed:
Session.connect: java.net.SocketTimeoutException: Read timed out
I have increased the pooling interval to 1 Hr from 1 Min. Waiting for the next pooling interval result.
Guide me if I am heading right.... or anything else needs to be done.
Regards,
Krishna Chauhan

Connection Error, cannot connect to game server

I Just updated to iOS 8.1. When I tried to play WordRoll I got an error message, Connection Error, Cannot connect to game server.
ave researched some answers and have tried several, log out then soft reset, delete app and reinstall, reset wireless, nothing seems to work.

I'm not sure. Prior to last Wendesday our net connection was fine, but from Wednesday evening it's been decidedly flakey during the evenings
Oh & I'm using a HH2 & am on Total Broadband option 3. I've also tried the Leatrix Latency Fix (several months ago) & have turned off the router for several mins (on Thursday evening). I've been able to connect again to the servers this morning (as I did yesterday morning). Here's the pathping (sorry for it being an image, I can't work out how to copy & paste from the dos box & don't really want to copy it out), my HH's saying I'm getting 7,616kps down & 448 kps up, Speedtest.net's saying 6.34Mb/s down & 0.38Mb/s up (now).

User cannot connect to backend system with user J2EE_ADMIN.

I am using Rapid Installer to initiate the second part of the installtion "ERP 6.0 EhP 3 Self-Service Scenarios and Automatic Roles". When I get to the J2EE User section to enter the parameters, the user is defaulted to "Administrator" and I enter my password. I click next and get this message "User cannot connect to backend system with user J2EE_ADMIN." Any ideas?

If this is a double stack installation, you need to enter J2EE_ADMIN as user, NOT administrator.
Markus

Sharepoint list dataheet view error "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available"

I have a List which is having around 14000 items in it.while opening that list in datasheet view it is giving error .
Below is a summary of the issue:
After selecting datasheet view beow error occurs:
    "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available."
    "Unable to retrieve all data."
    The item counts displays say 100 out of 14000 items.
Exporting List to excel is giving only 2000 records out of 14000 records.
Other Observations   -
This is happening to only one list on the site .There are other lists in the site whose no. of records is equal to 8000 to 9000.They are working absolutely fine without any error.
Also, If I am saving this list as a template and creating another list with it ,then it is working absolutely fine with 14000 records,so the issue does not seem to be related with no. of records as the template list is working fine.
I have checked the Alternate access mapping setting ,its fine.
It should not be related to lookup,datefield or any other column as the list created from it template is working fine with all these columns.
I checked below links also ,but doesn't seem to work in my case.
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/974b9168-f548-409b-a7f9-a79b9fdd4c50/
http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/87077dd8-a329-48e8-b42d-d0a8bf87b082
http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneral/thread/dc757598-f670-4229-9f8a-07656346b9b0

I have spent two days to resolve this issue. Microsoft has released two KBs with reference to this issue...but are not appearing in search results at the top.
I am sharing my finding.
1. First install the
KB2552989 (Hopefully you might have already installed it. The KB detetcts it and informs the user.)
2. Then update registry by adding new key for data fetch timeout as mentioned inKB2553007
These two steps resolved the issue in our environment. Hope it might help others as well.
Pradip T. ------------- MCTS(SharePoint 2010/Web)|MCPD(Web Development) https://www.mcpvirtualbusinesscard.com/VBCServer/paddytakate/profile

Critical Error: Cannot Connect to SQL Server. {SQL Server} not found. Timeout expired.

Greetings,
I have been having some issues with various areas in a SharePoint 2013 farm. While working my way through a bazillion errors in the event logs, I have found the following error. It looks to be happening every hour; almost exactly 5 minutes after
every hour.
"Cannot connect to SQL Server. A_PROD_SP01 not found. Additional error information from SQL Server is included below.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding."
I also find, a health analyzer rule that is failing at the same time:
Availability: One or more servers is not responding.
However, there isn't any server listed in the Failing Servers section.
Any thoughts?
Thank you,
Bob

Hi Bob,
For your issue, it can be caused by that the SharePoint database access account might not have the necessary permissions to communicate with the SQL Server. Please grant correct permissions to the database access account:
You must be a member of the Farm Administrators group to perform this task.
Assign the database access account:
On the Central Administration home page, click Security and in the
General Security section click Configure service accounts.
On the Service Accounts page, in the Credential Management section, in the upper drop-down list click the correct Web application pool for your Web application.
In the Select an account for this component drop-down list, click the domain account that you want to associate with this Web application pool, or click
Register new managed account to associate a new domain account with this application pool.
Click OK to save changes.
Reference:
https://technet.microsoft.com/en-in/library/ee513066(v=office.14).aspx
http://blogs.technet.com/b/wbaer/archive/2009/10/06/intermittent-database-server-connectivity-and-microsoft-sharepoint-products-and-technologies.aspx
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Error: "Cannot access the web server" with BlazeDS Turnkey

Help! I'm new to Flex and BlazeDS and Eclipse. I was trying to setup a Flex Project using a BlazeDS/Tomcat server running from Eclipse on Windows XP per the example in flexbandit.com/archives/55#comment-269 and in (www.infoq.com/articles/blazeds-intro). I am NOT using the Eclipse Flex plug-in. I'm using Flex Builder for the Flex code.
Here's what I've done:
I installed BlazeDS and tested http://localhost:8400 - That worked.
I setup Tomcat in Eclipse. - That seemed to work.
I created a Dynamic Web Project in Eclipse - That seemed to work.
I created the bare-bones BlazeDS Configuration under the Eclipse project and then created a basic HelloWorld java class.
I added the destination in the “remoting-config.xml” file found in the c:/projects/workspace/ReportGenTool/WebContent/WEB-INF/flex” directory:
<destination id="HelloWorld"> <properties> <source>HelloWorld</source> </properties> </destination>
When I started the application server by clicking on the server's green play button in Eclipse and then tried to open localhost:8400/ReportGenTool, I got the 404 error : The requested source (/ReportGenTool/) is not available which according to the instructions is fine.
Next I created a Flex Project, but when I try to validate the new Flex project configuration, it gives me an error "Cannot access the web server. The server may not be running, or the web root folder or root URL may be invalid."
When I validated the server was running after setting up the BlazeDs Turnkey, I saw the BlazeDS page.
Now when I bring up http://localhost:8400 I get:
 Directory Listing for /
 Apache Tomcat/6.0.14
My eclipse project is named ReportGenTool and I've overwritten the WebContent directory with the META-INF and WEB-INF directories from the BlazeDS installation (C:\blazeds\tomcat\webapps\blazeds). According to Eclipse the server is running.
My Flex project is named ReportGenTool and is located in another directory away from the Eclipse project directory.
 My root folder is: C:\Projects\workspace\ReportGenTool\WebContent
 Root URL: is http://localhost:8400/ReportGenTool/
 Context root is: /ReportGenTool/
Any idea what might be wrong? What didn't I configure that needs to be configured?
Thanks in advance.

This is not working because your router has a direct to your web server that is not through the outside interface which is needed for nat to occur, for this to work you need to setup a loopback interface as nat outside and policy route traffic to there for your server traffic
Bu if your server is internal why do you need nat at all? Can you not use bind with views that might be simpler
M
Sent from Cisco Technical Support iPad App

RDC for MAC cannot connect to TS server with error message "You were disconnected from the Windows-based computer because of problems during the licensing protocol".

the mac clients are running RDC for mac version 2.1 and they cannot connect to Windows 2008 R2 TS server. They get the error "You were disconnected from the Windows-based computer because of problems during the licensing protocol".
really appreciated if someone have a fix for this.
thanks,
/dan

Hey,
Any proposed answer for this ?
I face the same problem and my environment
and I've got same results as dle2k
1. TS lic mode is set to per user confirmed it works for windows clients.
2. the TS server's system log logged error "The Terminal Server security layer detected an error in the protocol stream and has disconnected the client".
3. the reports shows per user cal has been issued to users. no temp per device cal has been issued.
4. yes, CoRD works .
5. we tried version 2.1.1 of the Mac RD Client but it also does not work.

BPC 7.0 Install error - Cannot connect to SQL server

Hi,
I am in the process of installing BPC 7.0 and encountered the following error after filling the "Advanced settings" details on the server info screen:
*Cannot connect SQL server.
Please check the SQL server connection or check System Admin ID to access the sql server.*
I know that the System Admin ID I provided in the previous (service type accounts) screen is correct. What am I missings? Appreciate the help asap!

BPC installation user has to be SysAdmin into SQl Server.
Also make sure that SQL Server was installed having Windows authentication enable otherwise the connection to SQL Server can not be establish.
Into Application Server (the server where you are trying to install BPC) open Management Studio and see if you can connect to SQL Server.
Are you using special ports or instances fro SQL Server?
Please make sure you are providing all these information into BPC setup.
Regards
Sorin Radulescu

ERROR: Cannot connect to Host: [SERVER] with user name: [J2EE_ADMIN]

Similar Messages

Maybe you are looking for