Error code 0x0000000A installing Windows 10 Tech Preview on VirtualBox

Hello
I am trying to install Windows 10 Technical Preview on VirtualBox but I am receiving a message with the error code
0x0000000A
Parameters
0xFFD00000
0x000000FF
0x0000000A
0x81D171D3
I am tring to install with the archive WindowsTechnicalPreview-x86-EN-US.iso on a VirtualBox Configuration for Windows 8.1. (32 bits)
The parameter for hardware acceleration VT-x/AMD-V is enabled.
I have created before other virtual machines with other operating systems without issues.
All those machines have been created with the last updated release of VirtualBox what is 4.3.16. and that is the same one that I am using this time.
Thanks in advance
Regards
German

Do you have hardware support for virtualization on windows 8.1? Ensure that your VT-x/AMD-V acceleration is enabled also enable this feature in the BIOS setting menu.
Follow the given steps:
Reboot your computer and access the BIOS section> Advanced -> CPU Configuration
Click to enable the "No-Execute Memory Protection" option.
Go to Exit section. Choose Save Changes and Exit
Restart your system.
Here is a relevant Discussion, hopefully it would prove helpful:
https://forums.virtualbox.org/viewtopic.php?f=6&t=63125

Similar Messages

Satellite L500-21T - Stop error code when installing Windows 7

Hello
I bought a notebook Satellite L500-21T from saudi arabia.
I lost the hd recovery during trying fix windows 7 installation. If I try to install windows 7 I get stop code 0x0000009c error. If I turn sata to compitibality from AHCI Windows xp sp2 not sp3 installed but most drivers like display and wlan not installed. Trying to update BIOS give that is not suitable for that the phoenix version of bios 1.5
I changed HD and RAM but the same problem. It may the BIOS?
plz help me

Hi buddy,
Do you install Windows 7 from Toshiba recovery disk or normal Microsoft disk?
Usually if you install Windows 7 from recovery disk, everything should work well because its pretested image from Toshiba and you get back out of box settings (factory settings).
If not it seems to be a hardware malfunction
By the way: Try to load the default settings in BIOS. You can do this if you press F9 key in BIOS.

I am unable to install itunes in my windows 7 laptap. Getting 2349 error code while installing itunes. Any suggestions to overcome?

I am unable to install itunes in my windows 7 laptap. Getting 2349 error code while installing itunes. Any suggestions to overcome?

Is this the error your gettings?
If so, remove the installer, and redownload the itunes set-up installer
www.apple.com/itunes/download
Message was edited by: keeferaf

Receiving an error while trying to installed Photoshop CS4 . error code 6. using windows 7

receiving an error while trying to installed Photoshop CS4 . error code 6. using windows 7

There isn't much here which is actionable. Please review your installation logs by following the steps listed at Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html.

Error code: 0xc0000001 file: \windows\system32\winload.efi missing or contains errors

I have a new 2 month old(Aug 2014) hp eliteone 800 all in one computer running win 8.1 64bit. i have two 1 tb hard drives raid configuration. left computer on for an afternoon and when I came back it was off mysteriously. tried to turn on and it
attempted to repair and was never able to repair. hp sent a new windows 8 software to install, they said os was corrupt. installed three times now i get error code: 0xc0000001 file: \windows\system32\winload.efi missing or contains errors. hp said installation
disc probably corrupt and sent me another. installed twice with same result, error code: 0xc0000001 file: \windows\system32\winload.efi missing or contains errors. This began after the computer was just one month old and after i had placed 300-400
gb of my personal data from other computers on it. I need all of these files so can't just recover/delete all of the files on the computer, although i have read that that may be my only solution? If i do recover will the files still be on the second hard drive??
can you help with this problem?? thanks.

Hi Richard,
Did you try to repair or reinstall the system when you insert the new media?
Have you tried to carry out a system recovery, which will restore your system back to factory defaults and how was the result?
In addition, I suggest you use the new installation media to do a clean install(full format the old system).
How to perform a clean installation of Windows
http://windows.microsoft.com/en-IN/windows-8/clean-install
Note: If you have important personal data, remember to insert your drive into another computer to backup your personal data before you do any operation.
Karen Hu
TechNet Community Support

I keep getting a 205 error code on my windows 7 laptop

I keep getting a 205 error code on my windows 7 laptop

that means your downloads are corrupted.
try a different (wired) connection and/or a different browser and/or a download manager. or use a different dl site.
for help with the later, what program/suite are you trying to install and from what link?

Couldn't install windows technical preview on a usb flash

Hi,
couldn't install windows technical preview on a usb flash setup.
please say me the solution to this problem

Hi,
Any errors poped out? You may try to switch to a USB 2.0 port and check this issue again.
If you have DVD drive available, you may also choose to install Windows 10 through DVD, download the ISO file using this tool:
Windows USB/DVD Download Tool
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a reso

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
Sorry for the long title, first time poster here.

This thread is pretty old, are you still having this issue?

Error code 80070002 on windows 8.1 updates

When i try to update windows it keeps failing.
I have looked in to this and found its HP NULL PRINT thats the problem.
Error code 80070002
How can i resolve this ??

Hi @stuart40,
Welcome to the HP Forums!
I noticed that you are getting the error code 80070002 on windows 8.1 updates, with your HP Photosmart 5520 printer. I am sorry to hear this but happy to help!
Just to confirm, are you trying to update the printer software, or the Windows Operating System in general?
Is your computer an HP computer?
In the meantime, here is a post, I had found regarding this issue, Windows 8.1 Update Error Code: 0x8007002. Which I am assuming is an Operating System issue, not a printer issue.
If it is the Windows updates you are trying to resolve, and the post does not help, please contact Microsoft Support.
Thank you for posting, and happy new year!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Preview Build Section gone from Windows Tech Preview

So, I noticed that after updating to Windows Tech Preview Build 9860, the preview build section is gone from my settings in zPC settings. Is this a glitch or did Microsoft temporally remove it? Thanks.

It's there, you're just not looking in the right place.
There are two settings Apps - PC Settings and zPC Settings.
Look in PC Settings, under
Update and recovery. The Preview builds section is there in build 9860.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Error codes when installing elements 12

Hi all,
Who can help me with these errors. How can I make it right again. Very frustrating
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DF006, DF014 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe Photoshop Elements 12 12.0.0.0 {48C6BCD3-4F00-4CFE-BDD4-8D57C640B985} -----------
ERROR: DF006: The path "/Applications/Adobe Photoshop Elements 12" already exists and is not a directory, Please rename or delete and retry(Seq 1)
ERROR: DF014: Unable to create symlink "/Applications/Adobe Photoshop Elements 12/Adobe Photoshop Elements 12"(Seq 1)
Thanks for the help
Denise

It has been installed bedore and then it suddenly did not work anymore. That's why tried to install it again, but unfortunatly did not work
Verstuurd vanaf mijn iPhone
Op 25 jun. 2014 om 22:14 heeft "Barbara B." <[email protected]> het volgende geschreven:
error codes when installing elements 12
created by Barbara B. in Photoshop Elements - View the full discussion
Did you try to install before without removing anything that did get installed from your applications folder before trying again? You don't have the installer files in the applications folder, do you?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6497038#6497038
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Error code 2131 on windows vista, how do i fix it

i can no longer burn cd's from itunes. I get error code 2131 when trying to do so. I operate on dell with windows vista. I ran a diagnostics and everything seemed to check out:
Microsoft Windows Vista Home Premium Edition (Build 6000)
Dell Inc. Inspiron 1501
iTunes 8.2.0.23
QuickTime 7.6.2
FairPlay 1.4.10
iPod Updater Library 8.1d19
CD Driver 2.1.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.5.1.3
Apple Mobile Device Driver 1.43.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number CC4D0456511EAEC2
Current user is not an administrator.
The current local date and time is 2009-10-29 01:05:24.
iTunes is not running in safe mode.
Video Display Information
ATI Technologies Inc., ATI Radeon Xpress 1150
** External Plug-ins Information **
No external plug-ins installed.
** CD/DVD Drive Tests **
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.1.0.1),
E: TSSTcorp DVD+-RW TS-L632H, Rev D200
Audio CD in drive.
Found 17 songs on CD, playing time 70:20 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 02:03:52
Track 3, start time 06:14:70
Track 4, start time 10:58:17
Track 5, start time 16:16:32
Track 6, start time 21:16:07
Track 7, start time 22:34:67
Track 8, start time 27:42:45
Track 9, start time 31:38:25
Track 10, start time 35:58:47
Track 11, start time 41:35:22
Track 12, start time 45:32:37
Track 13, start time 50:25:25
Track 14, start time 54:43:17
Track 15, start time 58:55:70
Track 16, start time 60:25:32
Track 17, start time 65:26:62
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 24.
The drive CDRW speeds are: 24.
The drive DVDR speeds are: 24.
The drive DVDRW speeds are: 24.
The last failed data CD or DVD burn had error code 2131(0x00000853). It happened on drive E: TSSTcorp DVD+-RW TS-L632H on CDR media at speed 0X.
How can I fix this problem so i can start burning cd's again? HELP!

The 2131 error is associated with the TSST TS-L632* optical drive.
Dell off this download to fix the problem:
http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releasei d=R173097&SystemID=LATITUDE%20D830&servicetag=&os=WLH&osl=en&deviceid=14182&devl ib=0&typecnt=0&vercnt=1&catid=-1&impid=2&formatcnt=1&libid=31&fileid=235346
Check the compatibility tab on the site as far as I can see your Dell model is in the list assuming your sig is correct.

Error 0x80070017 when installing Windows 7 via Boot Camp...

I've been trying hard to research this issue and haven't come across anything that has worked for me.
At work, we have an iMac (Early-2009) that we wish to install Windows 7 on. Previous user has left, so I reinstalled Snow Leopard (10.6) and used Disk Utility from the disc to reformat complete to GUID single partition Mac OS Extended (Journaled), which is pretty standard for Macs. Mac OS X installed and booted just fine. I updated completely to 10.6.8 and all other updates. Only installed Microsoft Office 2011 and Firefox.
So Boot Camp begins...
Found that the early-2009 model doesn't "support" Windows 7 64-bit, so we are fine going with 32-bit. The 32-bit Windows 7 disc has been used to install Windows 7 using Boot Camp on 2 Mac Mini's (one Intel Core Duo, the other one Intel Core 2 Duo) just a few days ago.
Opened Boot Camp Assistant, partitioned the 1TB drive equally, inserted the Windows 7 disc, and clicked Restart.
It boots from the Windows 7 disc, I go through the options, choose the BOOTCAMP partition and format it (I assume Windows 7 is choosing NTFS for me). Click next.
It copies the files instantly, but then "begins" to Expand the files. It remains at 0% for 5-10 minutes (I can hear the Windows 7 DVD spin down and spin up, but mostly spin down). That's when the error hits:
"Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070017"
I click Ok and cancel the install. Restart and boot back into Mac OS X. And here I am.
Important Notes:
I've tried multiple times with a 64-bit disc as well. I will likely go check out another 32-bit disc from our software department, but I know this disc works on other Macs.
This issue occurred a month back as well when we attempted to install Windows 7 via Boot Camp (so before the hard drive and OS were reformatted and reinstalled). I was hoping reformatting and reinstalling the Mac OS X would solve the issue.
The Superdrive appears to be working just fine.
I read somewhere that I need to use repair disk to fix it. Does anyone know if I can repair disk a NTFS partition? Or am I suppose to repair disk the parent drive itself? The place I read it wasn't specific AT ALL and the forum was closed and I couldn't find a way to get a hold of the person. It just said "Repair disk did the trick". People, if you find a solution to your own problem, POST the solution!
Thanks in advance!

Yea, I saw that kb article. I verified we have the early 2009 iMac. It's an iMac 9,1 (3.06 24-inch, A1225).
As far as different hardware, I really don't think so, but I'll have to double check with my fellow employees. The specs all match up, but I'll see if anyone remembers having to replace hardware or send it into Apple.
I did think of trying an external DVD drive too, I'll see if I can scrounge one up. I'll post if it works or not.
The employee using the machine knows Windows, but is willing to learn the Mac OS X. Diversify your experiences I always say!
An added note to the Repair Disk "solution". Turns out you can't run Repair Disk on NTFS partitions or the parent hard drive that contains that partition, which makes since. I can only run Repair Disk on the HFS+ partition which did no good. (This is, of course, from booting up using a Mac OS X Install DVD).
Mac_Win, thanks for the suggestions!

Bootcamp error code when installing drivers from lepard disk

hello everyone
ive just tryed to install windows on my new mbp and it was all going great till i put in the lepard disk to install the drivers
the disk starts up and appairs to start inputing the new drivers when is stops and tells me there is an error "code 2753"
im not sure what to do next to fix this anyone have any ideas?
thanks
sean o'hare

You might want to ask that question in the Boot Camp forum.

A fatal error when attempting to access the SSL server credential private key. Error code 0x8009030d. Windows 8.1.

Hi,
We develop a server-side application which receives incoming https connections using self-signed certificate. It was all ok while we were using Windows 7 or Windows 2008 as OS, but when our clients started installing Windows 8 as server OS they encountered
big problem: application got unavailable in few hours after start.
In event logs we have following:
A fatal error occurred when attempting to access the SSL server credential private key. The error code returned from the cryptographic module is 0x8009030d. The internal error state is 10001.
After restart, application recreates certificate and all works normal few hours till next fatal error.
This
article did not help us. And I repeat that this error appears only on Windows 8 (we tested on Windows 8.1). Windows 2012 Server we did not test yet.
How we can solve this problem?
Best regards.

Hi,
Since this article released in 2008,I suspect the code mentioned in this article doesn't supprot Windows 8.
And since the certificate was written by C#,I suggest you submit a new case on MSDN Forum as they will be more professional on your issue:
https://social.msdn.microsoft.com/Forums/en-US/home
Regards,
Kelvin hsu
TechNet Community Support

Error code 0x0000000A installing Windows 10 Tech Preview on VirtualBox

Similar Messages

Maybe you are looking for