"error code -1 was returned by the core audio driver" battery multi?

working on a track with NI's battery 3 loaded as a multi, eveyrthings fine. next day come to open the project and i get the following message:
"error code -1 was returned by the core audio driver"
everything is fine with the project except that in the channel where battery is loaded, the plugin name (where you insert the plugins) has a line strike through it, and the GUI wont open when you double click it?
i tried re-loading the plugin as a multi instrument but get the same error message, but it loads fine as just a stereo or mono plugin.
any ideas??
thanks in advance.

I just did a search using "search discussions" using the term:
"-50"
(use the quotes, because they're important when doing this kind of search)
It returned a lot of hits, and apparently you're not alone in wondering what this error means. Lots of people reporting it as an error in iTunes, and also something related to 10.4.9. But in the event no one here answers your question, I suggest you do the search yourself, slog through the results, and see if anyone's come up with an explanation that fits your scenario.

Similar Messages

Error code -36 was returned by the Core Audio driver.

Hi; am receiving this error...
Error code -36 was returned by the Core Audio driver.
...but am not finding any info about it or how to fix/update the driver. Anyone have this error before?
thanks, Charlie

There is no such thing as a G5 Intel.
Error -36 is an "I/O error", could mean a lot of things, you should give more details:
• Does this happen during recording or playback?
• Does it happen again if you re-open the project/re-start GB?
• Does it happen with other projects too?

Error code 25974 was returned by the core audio driver?

hello, well ive been having a problem trying to record one of my dj sets directly from my mixer.
This is my set up: My dj equipment is conected via my mixer to an m-audio ozone midi keyboard (1 stereo in 1/4 TRS jack), this keyboard is connected via usb to my computer (imac g4), and im using logic express 7.0.1 as my recording software.
When i start recording, everything is working ok, i can see the signal on my
m-audio keyboard, and i can see the signal on logic, on one of the audio tracks.
But then, logic gives me an error message:
"error code 25974 was returned by the core audio driver."
and then the signal goes out, and i cant finish my recording session. The portion of the recorded set until the error, is perfect, but i need to be able to record the whole session.
i hope i made my self clear. any help!!! thanks a lot
Imac G4 Mac OS X (10.4.4) 1 g ram

I just did a search using "search discussions" using the term:
"-50"
(use the quotes, because they're important when doing this kind of search)
It returned a lot of hits, and apparently you're not alone in wondering what this error means. Lots of people reporting it as an error in iTunes, and also something related to 10.4.9. But in the event no one here answers your question, I suggest you do the search yourself, slog through the results, and see if anyone's come up with an explanation that fits your scenario.

Error code -50 was returned by the core audio driver. Help anyone?

When I open Virus Powercore I get the error message, this only happens with Virus Powercore. The other thing that happens is that the user interface from Virus displays only with the controls not with the editor that will give you the original user interface. Can anybody please tell me what this error message is becuase I can't find it any where.
Dual G5 1.8Ghz Mac OS X (10.4.9)

I just did a search using "search discussions" using the term:
"-50"
(use the quotes, because they're important when doing this kind of search)
It returned a lot of hits, and apparently you're not alone in wondering what this error means. Lots of people reporting it as an error in iTunes, and also something related to 10.4.9. But in the event no one here answers your question, I suggest you do the search yourself, slog through the results, and see if anyone's come up with an explanation that fits your scenario.

Error code -1 was returned by the Direct TDM driver

Everytime when I try to quit Logic I get the message "Error code -1 was returned by the Direct TDM driver". I can not quit Logic on the normal way, everytime I have to "force quit".
I use DAE and Direct TDM.
Any idea's how I can solve this problem?
G5 dual 2,7 Mac OS X (10.4.6) 4,5 GB RAM, Logic 7.2.1, PT7.1cs7, HD3 Accel, 192,2x96i, 96

I'v just received a mail from Waves:
The current OS-X 10.4.6 update causes problems with certain Waves plug-ins.
This happens when using the Mac automatic updates.
In order to fix it, please download Mac OS X 10.4.6 for PPC.
Install it and restart your computer.

ERROR 39 WAS RETURNED BY THE CORE AUDIO DRIVER ??"?????

i keep getting this error
ERROR 39 WAS RETURNED BY THE CORE AUDIO DRIVER ??"?????
how do i make it go away!

a -39 is an EoF (end of File) error. the first thing i'd suggest is to unlock all tracks, then re-lock them to let them re-render

Error code -50 was returned by the Direct TDM driver

Got this message when instansing a Stormdrum Kompakt Instrument in Logic. I've got Logic Pro 7.2, Stormdrum Kompakt 1.0.8.003 (newest version, and necessary to work in Tiger), EastWest AU-Hotfix installed. Stormdrum use both the NI's Intakt an Kompakt. The Intakt Instrument (for loops) works just fine under Direct TDM - and as stanalone. Kompakt works standalone, but not under DTDM in Logic - neither Core Audio. Same error message with Core Audio (...."by the Core Audio driver").
The AU-Manager has validated and accepted the plug!
Anyone got the same applications working??

Hello! I'm using Stormdrum via DTDM with success. It hasn't always been smooth sailing (took a few revisions before Logic would validate it), and occasionally, some weirdness will ensue, but it seems to work fine right now. Not in front of my computer presently, but if you have any specific questions, I can check tonight.
PT 7.1, Logic 7.2, OSX 10.4.5., HD3 Accel

Garageband 1.1.0 Error code709 was returned by the Core Audio driver

I receive this error code everytime I open Garageband.
Once the error code is dislayed I need to quit GB and try to open it again but most times the error just reappears.
G4 867MHZ Mac OS X (10.3.9) 1.25GB Memory
G4 867MHZ Mac OS X (10.3.9) 1.25GB Memory

I just did a search using "search discussions" using the term:
"-50"
(use the quotes, because they're important when doing this kind of search)
It returned a lot of hits, and apparently you're not alone in wondering what this error means. Lots of people reporting it as an error in iTunes, and also something related to 10.4.9. But in the event no one here answers your question, I suggest you do the search yourself, slog through the results, and see if anyone's come up with an explanation that fits your scenario.

ERROR CODE -1 was returned by the CoreAudio driver? help!!

Just been using my Mac and noticed that i get this crash :
"ERROR CODE -1 was returned by the CoreAudio driver"
The it says "The application logic Pro quit unexpectedly" ?
Am running Logic pro 7.1.1 on a 2Gb G5 2.3 Dual Core Mac with a MOTU 828mk2 - is this crash to do with the MOTU?
Secondly is anyone else using Kontakt 2.02 with Logic on a Mac? It seems a bit unstable and it doesnt trigger loops on the 1st beat of the bar of a sequence? Any ideas??
Apple G5 Mac OS X (10.4.5) 2Gb Ram, Logic 7.1.1, PTLE 7.0, 20" Cinema Display,

it could be the Motu driver if you have not updated it since upgrading to Tiger. here is a link
http://lasso.motu.com/downloads/filelist.lasso?&-Database=downloads&-Table=dldb&-Op=cn&product=firewireaudio&-Op=cn&platform=macx&-sortfield=date&-sortorder=descending&-search

Error Code 25974 was returned by the Audio Driver - Logic/MBOX

Hi,
I know this question has been asked before but could not find a resolution to this problem.
I'm using a MacBook Pro (15-inch, Mid 2012) with a 2.3 GHz Intel Core i7 processor, using OS X Mountain Lion (10.8.2) and running Logic Pro 9.
I've been using the AVID MBOX interface for some time now and it hasn't failed me yet, but today I received the error message 'Error Code 25974 was returned by the Audio Driver' when selecting it as the input/output device.
I'm not sure why this is now happening as the interface drivers are up to date and as I said, it was working earlier in the week when I last used it.
Any help would be greatly appreciated.

Bump,
This is only happening with one particular project ... I imagine it could have become corrupted somehow, yet I can still work on the project and edit it. I just can't bounce it! Any ideas as to what I can do?

Help?! "Error Code -1 was returned by the CoreAudio driver" issue!

Hello all,
I am having a problem with Logic Express. Certain song files (not all) will not open. I get the "Error Code -1 was returned by the CoreAudio driver" dialog box, then Logic Express crashes.
I don't want to lose any of these songs.
Here is the pertinent info for diagnostics:
System:
MacBook Pro 2.0ghz Core Duo
2 GB RAM
10.4.11
Logic Express (Academic) 7.2.3
Line 6 Toneport UX2 as soundcard (just loaded most recent driver)
3rd Party Plug-ins:
PSP Vintage Warmer 2 & 3
NI Guitar Rig 2 & 3
(both worked fine previously)
Additional information:
About a year ago I obtained a six month demo of Logic Pro (with an XKey dongle). The time has expired but I haven't gone through my system to delete everything from the Logic Pro install (and didn't want to accidentally toss out something Logic Express might need).
I ran searches here on this forum and Google and did not find any workable solutions.
HELP?!

Strange. I just went into the Library/Audio/Plug-ins/Components folder and thew out the older versions of VW and GR (as listed above) plus an old demo of Amplitude that I never ended up using. Now the files seem to be opening up. Does anyone have an explanation so I might understand just what happened?

Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

Error code 1 was returned by the audio driver :( randomly!

hey all! ive been getting this messege "error code 1 was returned by the audio driver" almost every time i try and merge tracks, bounce track in place, bounce region in place, or mixdown stereo regions per tracks. NOT when i do a real song bounce though. i feel like im noticing my computer is taking a long time to copy audio files into logic projects...i dont know if they are related though. but this error code 1 thing has been hapening CONSTANTLY. the thing is...nothing has changed. i havnt installed or changed anything on my system. its happening on ALL of my old projects, and MOST of my new ones. ive tried disabling all third party AUs and it still happens. do i have bad ram? a bad drive? do i need to reinstall everything? thanks so much in advance!

Ok, I don't know if this solves your problem... but as for what was triggering the 'Error code 1' message on my computer... Here's the update.
After much troubleshooting, the cause of this error in my setup was the Highpoint RocketRaid 2314 eSata PCIe card.
The Highpoint RocketRaid driver is included in OS X 10.8 with no additional drivers / installers to run. However, it isn't compatible with the old driver when upgrading the kernel (ie. 10.6 - 10.8)
I was bouncing to an external drive connected through eSata to the RocketRaid PCIe card... error message. Time Machine backup connected through eSata... error message. The drives were being dismounted rudely, or losing connection momentarily and reconnecting, resulting in the error messages.
Here are the instructions from Highpoint tech support to manually uninstall the embedded driver, and then reinstall the old Snow Leopard driver for use in Mountain Lion (10.8)... which works as it's suppposed to.
1. Go the folder System > Library > Extensions >, look for the file HighPointRR.kext and delete that file.
2. Second, download the driver from the link below, then run the Un-install script to remove any previous installed driver.
http://www.hptmac.com/productfiles/bios_driver/hptrr-mac106-driver-v11...
Then re-install the driver, but do not reboot or restart the system.
3. Third, download the webGUI from the link below. And run the un-install script to remove any previous installed web GUI.
http://www.hptmac.com/productfiles/WebGUI-Mac-v168-091120.dmg
Then re-install the web GUI and reboot after installation is complete.
Once the system has booted up, open a browser and type URL to log into web GUI.
http://localhost:7402
User Name: RAID
Password: hpt
I hope that this helps someone!

Error Code 1 was returned by the Audio driver

Whenever I try to export a podcast to MP3 - using good quality, I get multiple errors. A little box pops up saying "Error Code 1 was returned by the Audio driver".
In the saved file there is a short one second pause wherever that particular error has shown up.
Has anyone experienced this error and knows of a solution? I am utterly clueless, not very experienced with Garageband at all...
Thank you in advance!

I'm getting this too, for the first time. I've got a project that I've used to publish a monthly podcast with and I've been opening, editing, and saving this project for a couple of years now.
Now, with GB '09, I'm getting this error. Not pleased.

Every time i launch garageband i get this message "Error code 28773 was returned by the Audio driver."

HI. I just got a new macbook pro 15".
every time i launch garageband i get this message
"Error code 28773 was returned by the Audio driver."
when i hit record, the shaded area in GB starts to advance, but it doesn't record any sound, and when i hit the space bar, the recorded area disappears.
anyone know how to fix this?
I have installed BOOM, but i think that's the only extra sound software i have.]
PLEASE HELP!
thanks,
mojoman22

Please read this whole message carefully, especially the warnings, before doing anything.
1. The changes to your configuration suggested here should be considered provisional; they may not solve your problem, or they may remove functionality that you find useful. If a third-party system modification that you want to keep is causing the problem, seek help from its developer.
2. WARNING: Back up all data now if you haven’t already done so. Before proceeding, you must be sure you can restore your system to its present state, even if it becomes unbootable. If you’re not sure you can do that, STOP — DON’T CHANGE ANYTHING. If you’re dissatisfied with the results of the procedure suggested below, restore from your backup. I will not be responsible for the consequences, and I will not be able to help, if you ignore this warning.
3. You should either remove or update the following system modification(s), if an update is available from the developer:
Parallels
and definitely remove at least the following:
Boom
† MacKeeper
† VirusBarrier
4. Whatever you remove must be removed completely, and (unless otherwise specified in this message) the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job. I can't be more specific, because I don't install such things myself. Please do your own research.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
Again, please don't ask me to do this research for you. You can do it better than I can, because I haven't installed the product and I may not even know what it is.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.
5. I recommend that you never reinstall the modifications marked with a dagger (†) above, if any. If your problem is resolved after uninstalling all the above modifications and rebooting, but you still want to use some of those not marked with a dagger, you can experiment with putting them back, one at a time, testing carefully after each step. Keep in mind that system modifications may be incompatible with each other or with future OS X updates, so it may not be clear which one is at fault.
6. If you still have problems after making the suggested changes and rebooting, post again. Remember: if you don’t like the results of this procedure, you can undo it by restoring from the last backup you made before you started.
Remove the "MacKeeper" crapware as follows.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions, nor do I intend to repeat the test.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select Go ▹ Applications from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. A dialog will pop up asking why you want to uninstall it. You don't have to provide that information. Enter anything you like in the text box, then click the Uninstall button. All the functional components of the software will be deleted. That's the only useful feature of "MacKeeper:" it deletes itself. Reboot.
Do not try to uninstall by dragging the MacKeeper icon in the Dock or the LaunchPad to the Trash.
Here are some general suggestions. If you want your computer to be usable, don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” “extenders,” “cleaners,” “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this kind of material is useless, or worse than useless.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
The only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Never install any third-party software unless you know how to uninstall it.

"error code -1 was returned by the core audio driver" battery multi?

Similar Messages

Maybe you are looking for