Error code 23

Hi, I'm attempting to restore the iphone 3g of my brother and it keeps on prompting as an "unknown error occured (23)" everytime. I have tried to do it in 2 laptops already and have tried to uninstall and reinstall itunes. Both softwares were succesfully downloaded in each but it still doesn't restore. The phone won't initially start up even after i tried to press and hold the home and lock buttons, help here.
I'm from the Philippines and can't seem to call the 1800 phone number so any help would be appreciated

You have to activate Reader Rights. If you decide to do this, be sure to read the license agreement with regard to the limitation of this use. If it is a form, there is a limit on the number of form submissions. Sounds like it may not be a form for submission, but for personal use by the reader only.

Similar Messages

  • Cannot delete file from external hard drive (error code 36) in Finder, but Terminal is ok

    I have a relatively new Macbook Pro Retina 15" and have a Western Digital 1 TB Passport.  I've been using the passport for about a year now without any problems on older Macbooks in my house.  I used to be able to read and write to this drive no problem.  I am using the Paragon NTFS for Mac software in order to read and write to the NTFS drive.  When I navigate through the drive in Finder, if I try to create a new folder, I do not have a problem.  If I try to delete that folder I just created, I get this error:
    The Finder can’t complete the operation because some data in “untitled folder” can’t be read or written.
    (Error code -36)
    The folder has nothing in it whatsoever.  I just created it.  But if I go to Terminal and I run
    rm -rf "untitled folder"
    This works fine.  Why is Terminal acting different than Finder?  This does not happen on my other Macbooks.  Thanks in advance.

    Thanx for such qucik reply!!! The pages were great, it had an answer for my problem, but unfortunately it also involved me dealing with it only on the MacIntosh HD itself, not on mounted external drive I suppose... So it didn't work they say that there is an icon in the left corner indicating locked folder - I don't see any icon on it. It says you can untick the box to unlock the folder - there is no tick to be unticked. Finally, they say that if I don't have permition or rights I cannot delete it. But how do i change permittion which already says that i can read and write in it? So everything appears to be normal only I cannot delete it. there is not even any warnig telling me I don't have enough rights, it just requires the password and after me typing it in it makes the sound of scraping paper but does nothing more. I aslo had some problems with emptying Trash after being seemingly succesful with one file and had got so far to have them appear in the Trash (no clue how this one actully got there though..) I followd the advice and emptied the Trash with Terminal. The Folder is still there but it shows 0 Kb... So far so good BUT: It is still on the external drive, so I obviously only managed to copy it into the Trash!!! Phew, innit a bit too tight to poor owners, this macbook?? I want my rights back!

  • Report generation failed----​error code:-1720​5; Access Denied.

    Hi, All
        i have a trouble about report generation.it seems the error happened at the "write UUT report"--this step is teststand report generation'DLL.
        detail:
        An error occurred calling 'Save' in 'Report' of 'NI TestStand 2010 SP1 API'
    Access Denied.. Error writing to file 'D:\program\seq\xxx.xml'.
    The file might be open in another application. If file access is intermittently denied, you should try disabling the Microsoft FindFast utility. 
        error code:-17205; Access Denied.
        locationtep 'Write UUT Report' of sequence 'Single Pass' in 'SequentialModel.Seq'
        How to fix it?
        Thanks a lot.
    BR

    Hm, it looks like the file might be open in another application. If you see that file accesss is intermittently denied, you should try disabling the Microsoft FindFast utility.
    CTA, CLA, MTFBWY

  • There was a recent upadate on my PC, however it does not work. A error code comes up which says, min version is not compatible with max version. And I caanot open my browser. Please help.

    I do a system restore which allows me to open my browser. Without this I cannot open my browser - the error code comes up every time.

    Do a clean (re)install
    * Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data when uninstalling.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    From https://support.mozilla.com/en-US/questions/764376

  • My ipod touch is not list as a device on itunes.  When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

    My ipod touch is not listed as a device when connected to my computer.  As suggested I attempted to download the latest of itunes.  I got an
    ox8007054f error code and the down load will not complete.  I have also tried to restore my computer to an earlier setting, but it will
    not accept the change.

    Have you looked at this completed previos discussion. It discusses 0x8007054F.
    Re: Error message when trying to install iTunes

  • Capturing oracle error codes into a variable

    Hi
    Can someone show me how it is possible to save an Oracle defined error code into a variable? What I am trying to do is when a stored procedure fails an Oracle error is raised, such as ORA-xxxx, then pass this code into variable to be saved into a log.
    How do I achieve this?

    user633278 wrote:
    How do I achieve this?Function SQLCODE in PL/SQL exception handler returns error code. SQLERRM returns message:
    SQL> declare
      2      x number;
      3  begin
      4      x := 1/0;
      5    exception
      6      when others
      7        then
      8          dbms_output.put_line('Error code: ' || SQLCODE);
      9          dbms_output.put_line('Error message: ' || SQLERRM);
    10  end;
    11  /
    Error code: -1476
    Error message: ORA-01476: divisor is equal to zero
    PL/SQL procedure successfully completed.
    SQL> SY.

  • Error Code:942 While Scheduling a report in BI Publisher

    Hi All,
    I am trying to schedule one report in BI Publisher.
    After Clicking Submit Button while scheduling report,i get following error:
    Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.0.0) (Build 080319)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exist Error Code: 942 Call: UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + 50 WHERE SEQ_NAME = 'JOB_ID_SEQ' Query: DataModifyQuery()
    Kindly Help me in resolving this issue
    Regards
    Amrita Singh

    i know the issue,i can give quick fix, but in-order to make sure you don't get another glitch like this.
    I would recommend, you to install the scheduler in another schema or another db.
    Re-installing the scheduler schema tables will fix this.

  • ORA-00600: internal error code, arguments: [ktsircinfo_num1]

    While taking export of a table received EXP error and while dropping/selecting the same gor ora-600 errors.
    . . exporting table TEST4
    EXP-00003: no storage definition found for segment(29, 371385)
    SQL >Drop table test4 cascade;
    ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
    sql> Desc test4;
    ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
    I dont want to log TAR with oracle right now... I tried dropping and recreating Undo tablespace but still did not help much . Database version is 9204

    hi
    read metalink ID - 153788.1
    CHeers

  • Transport control program tp ended with error code 0212

    Hi all,
    I have created a two system landscape of development & production server. But while I am releasing any request from develpoment server a error is showing: " Transport control program tp ended with error code 0212 Errors: could not access file as supposed (see dev_tp or S".I have chosen development server as domain controller. TMS alert viewer error message also contains the following information------>command: TMS_MGR_READ_TRANSPORT_QUEUE
                                                                           service: transport service
                                                                           start : online
                                                                           Function: TMS_TP_SHOW_BUFFER
                                                                           message: TP_REPORTED_ERROR
    In import monitor it's showing : "tp finished: could not access file as supposed (see dev_tp or SLOG1113.K"
    Can you tell me how to resolve this issue?

    dev_tp contains:    
    This is R3trans.exe version 6.14 (release 700 - 09.04.10 - 11:26:00).
    unicode enabled version
    usage: R3trans.exe [<options>] <control_file>
    The control_file describes what R3trans has to do.
    The following options are possible:
    -c f1 f2 : Copy file f1 to f2 with character set conversion.
    -d       : DB connect. Test if SAP database is available.
    -i file  : Import from file without using a control file.
    -l file  : List the contents of file to the log file.
    -m file  : List the contents of file to allow tp to create a cofile.
    -t       : Test. All database changes are rolled back.
    -t4      : Trace level 4. Switch on developer trace.
    -u <int> : Unconditional modes. See below.
    -v       : Verbose. Write more details to the log file.
    -w file  : Log file. The default log file is 'trans.log'.
    -x       : DB connect without access on any SAP table.
    R3trans.exe finished (0012).
    & the slog file is not there in the trans/log directory

  • While activating a request in DSO getting error code 10

    While activating a request in DSO getting error code 10
    Hi All,
    I am trying to load data into Billing: Condition Data (0SD_O06) using 2LIS_13_VDKON. First while loading data I am getting error
    Record 8778 :InfoObject SOLD_TO does not contain alpa-conforming value 100000 which I changed manually in PSA maintenence and tried to load data again and now I am getting an error (Error 10 in the update) ID:RSAR No119.
    I have checked the formula in Transformation and it works fine. Still I am not able to load data.
    Please help.
    Thanks and regards
    Vishal Pardeshi

    Check the log for the request from the manage screen of the DSO, it will be there next to the monitor button.
    Otherwise you can check the error from the monitor screen of the request in Details tab.
    Veerendra.

  • Some data in ... could not be read or written. (Error code -36).

    Hello.
    I just got a Lacie 512mb disk, and thought it would be ideal for running my iTunes library off of. Got the disk, ran it through its paces, hooked it up to my Mac mini, and I can't seem to copy hardly any files over. Here's one error (but you can replace "iTunes Library" with any song and it's the same thing)...
    'The Finder cannot complete the operation because some data in "iTunes Library" could not be read or written. (Error code -36).'
    So, I think there's disk or file damage, etc. I boot off an external and run Disk Utility, DiskWarrior and TechToolPro against it - everything checks out fine.
    But I can't copy files from the mini's internal to my external Repair Boot disk or the Lacie 512. Always that same -36.
    So, at first I think it's the mini, then I think it's the Lacie, because it's new, so I reformat it: same issue. And that coupled with it won't copy to my Repair Boot, makes me think the mini again.
    But, I've got a g1 iPod mini hooked up (formatted in hfsj+), and I can copy this file to the iPod mini, but no where else. I not sure what this makes me think.
    And, I can duplicate the file on the Mac mini. In fact, if it's a song file that won't copy (none of them will), I can play it just fine.
    Thanks.
    Mac mini   Mac OS X (10.4.3)  

    I experienced a problem in a familiar way.
    After a recording session I tried to copy the complete folder with session and sound files to another disk (original and target disk both LaCie d2 250 FW800).
    Somehow the proces stopped prompting an -36 error over some files.
    When I look up these files in the Finder, it seems to have an iTunes audio-file icon instead of a ProTools audio-file icon (and so other standard app to open with). All the other files will copy fine. The files will play with quicktime in the preview window.
    Any-one a solution?
    Almost seems like some kind of copy protection, like implied earlier in this thread. I hope it's not. These are the originals...

  • "the finder cannot complete the operation because some data in [name of iMovie file] could not be read or written (Error Code 26)

    Hi all,
    I have an iMovie project in iMovie HD 6.0.3. (Mac OS 10.5.8)
    It plays, but I cannot copy the file (including saving it to a flash drive). I get either a message
    "the finder cannot complete the operation because some data in [name of
    iMovie file] could not be read or written (Error Code 26)" or the
    message "A project file is missing. The file [name of the QuickTime
    movie inside the project.dv] couldn't be opened and is being skipped."
    This happened suddenly, I was able to save a backup version numerous
    times while working on the project.
    I followed some of Karl Petersen's advise on apple discussions. I opened
    the package contents, and everything seems to be there. The source file
    (original QuickTime movie) is there and can be opened and played. I
    replaced the current project file with the backup in the package
    contents, but that did not change anything. I was able to export the
    movie timeline into a new project as a single clip, but would like to be
    able to copy the current project.
    Thanks for any ideas..

    Make sure all drives are formatted as "Mac OS Extended". (Journalling preferred, but not necessary).

  • Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

    Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
    I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
    I tried those solutions for my trash and that helped after some trying.
    However, I still have the problem with copying and moving files.
    I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
    Who can help me??
    Cannot seem to find any info on it on the support-forums or elsewhere.
    My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
    Any help would be greatly appreciated...
    Otto

    Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
    - make sure you have at least 10% of your harddisk in free space (I had only 5%).
    - do a PRAM-reset (http://support.apple.com/kb/ht1379)
    - perform a hardware test (http://support.apple.com/kb/HT1509)
    - make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
    - after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
    So far I only cleared up some space on my HD, and already the problem occurs less.
    Still, I will go through the other tips too.
    (will post progress)

  • 2TB Ext. Hard Drive is corrupted?, error code -50 and then error code -35 when i try to empty out my trash

    okay so a few days ago i received and email for one of my colleagues to do some final editing to a music video. the folder contained 2 videos a rough chops and the main which was about 2-3GB which i dragged on to my external hard drive . and at the time i was trying to install a trial version of parallel lines and me being a newbie to the software i didn't know i need windows installments for it to run lol but yeah... so i was just getting frustrated with the software i kept installing it uninstalling it and then i was thinking my the problem might be because my MacHD space is low (less then 40GBs on my MacHD), so.. i installed it on my hard drive where all my important files are (I'm a graphic designer and do light video editing) video projects and many photoshop projects form 2007 and logs and just a bunch of important files in my hard drive. so because i was so frustrated with the software i wasn't thinking and i installed it on my external 2TB hard drive. and when i realized parallel wasn't working i gave up, uninstalled the program form the hard drive and for some reason when i did that and i tried opening the video my friend had email to me and for some reason it did load up but a few seconds maybe about 10sec in the video is froze and closed my media app (VLC) and when i tried opening other video files it would freeze every few minutes but those specific files i had drag in last were not playing after at least 5 secs and eventually didn't open at all so i restart my computer login and now i get scared i see that my MacBook Pro isn't reading my external hard drive so i search threw forums... i unplug from the wall plug my external hard drive back in my computer and it loaded up but when i opened my external hard drive all my files had that plank white paper icon on my folders (because i have everything organized but subject when you open then drive folder. so... i go in to my projects and nothing, i open my edited photos and nothing... my hart feels like its about to drop and i keep opening files and there is nothing in them, but in "get info" of my drive it shows that there is filled so i go to "disk utility"... i "verify disk" passes ..."repair disk" doesn't past.... i look it up in forums... so i reboot my computer and go to the safe recovery menu. go threw the same ting "disk utility"... verify, pass... repair, pass... so now i feel relieved. i login files in the ext. hard drive load up i tried again to open the files and same thing happens... so now I'm thinking its the files i drag the files to the trash and try to empty and its gone i reboot the computer and my drive didn't load up so i tried unplugin it and back in... drive comes up i notice theres trash.. i tried emptying it and i get the error code -50. and no files are popping up on my external drive and i try to repair/unmount disk and the verify disk doesn't pass and when i click repair disk it doesn't past and another error code pops up -35.... so i felt my drive alone for a few days and yesterday i go the files deleted from the trash and now I'm not getting any codes but when i try to unmount.verify/repair the disk. keeps letting my tits need to be repaired so i click the repair button another error unable to unmount volume to repair...
    what do i do? my files still don't show up. and I'm very sorry for the long paragraph but i have to be detailed for you to understand my situation

    Read this.

  • Error Code 0xC004F074 Win 8.1 Clone

    Hello.  I have a Toshiba P867-S7102 with two HDD bays.  Bought an SSD and cloned WIN 8.1 to that drive, leaving the original HDD in the machine.  Changed boot order to SSD first, and all works save the error code mentioned in the title which
    will not allow the SSD OS to activate.  If I change the boot order back to the original HDD, the OS is activated.  The intent of this change is to place the OS and programs on the SSD and use the HDD for storage.  I believe my conflict is I
    the laptop thinks I have two OS versions running, but I am not sure how to deconflict. 
    Any help appreciated. 

    Hi,
    According to your descritpion, your Windows 8.1 should be computer build in system and not activated by KMS server, isn't it?
    If that it is, one OEM or retailed Windows Operate system license only available to one device. That's to say, you couldn't use one product key to activate another Windows system.
    Roger Lu
    TechNet Community Support

  • Satellite C850-1NU does not boot Win 8.1 - Error Code 0xc0000098

    Windows 8.1 will not boot
    Laptop is *Toshiba Satellite C850 1NU*, as from Saturday it will not boot up!
    *Error states "The boot configuration Data File doesn't contain valid information for an operating system.*
    *File:\ BCD*
    *Error Code 0xc0000098*
    I have transferred recovery tools from another laptop to a USB stick and then enter bios of the Toshiba Laptop to make the USB drive to boot first.
    It then comes up with the recovery tools.
    I clicked on "Refresh your pc" it then reports "The drive where Windows is installed is locked. Unlock the drive and try again".
    I clicked on "Reset your pc" it then reports "Unable to reset your pc. A required drive partition is missing".
    I have also tried "Automatic Repair" and it reports "Repair couldn't repair your PC".
    I am at a loss as to get my sons laptop up and running again. Advice would be much appreciated. Thank you.

    Further to my question, *I have now resolved the issue.*
    Thanks to phanlon7 on this link
    [http://answers.microsoft.com/en-us/windows/forum/windows_8-system/windows-crash-refresh-hard-drive-locked-unlock/a6bb04ff-5dba-4e10-a849-644cd0851bc6?page=2&rtAction=1390385080363]
    I used a usb stick and copied recovery from another windows 8 laptop.

Maybe you are looking for