.. ERROR CODE 4450 HELP PLEASE!.. I copied my cd/dvd diagnostics here

Hi, I used to always be able to burn CDs on my computer with iTunes fine and now I keep getting error code 4450 right after the 1st song begins to burn. My computer is not even one year old yet! I tried reading other topics like this one but I could not figure out how to fix the problem myself. The questions were responded with asking to run the cd/dvd diagnostics on iTunes so I did and here they are... PLEASE HELP ASAP! THANK YOU!!!
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Inc. Dell DM051
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0), DRVMCDB (1.0.0.1), DLACDBHM (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
RADEON X300 SE 128MB HyperMemory
RADEON X300 SE 128MB HyperMemory Secondary
Connected Device Information:
DiskDrive, ST3160812AS, Bus Type ATA, Bus Address [0,0]
CDROM, PHILIPS DVD+-RW DVD8801, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
D: PHILIPS DVD+-RW DVD8801, Rev 4D28
Drive is empty.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive D: PHILIPS DVD+-RW DVD8801 on CDR media at speed 12X.

Yes, here it is... but I have used this same pack of cd's to burn many times before. so i do not think it is the cd, i dont know if that information helps or not...
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Inc. Dell DM051
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0), DRVMCDB (1.0.0.1), DLACDBHM (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
RADEON X300 SE 128MB HyperMemory
RADEON X300 SE 128MB HyperMemory Secondary
Connected Device Information:
DiskDrive, ST3160812AS, Bus Type ATA, Bus Address [0,0]
CDROM, PHILIPS DVD+-RW DVD8801, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
D: PHILIPS DVD+-RW DVD8801, Rev 4D28
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 12 16.
The drive CDRW speeds are: 12.
The drive DVDR speeds are: 12.
The drive DVDRW speeds are: 12.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive D: PHILIPS DVD+-RW DVD8801 on CDR media at speed 12X.

Similar Messages

  • Error Code 1000- Help please-- newborn photos at stake!

    I downloaded the Shutterfly plug-in and then iphoto never opened again. Shutterfly helped me erase the plug-in and now claims any error is with iphoto... All I get is "error code 1000". Can anyone help me save the pictures of my newborn that I haven't saved anywhere else?? Dumb I know. Thank you!

    What version of iPhoto?

  • I pod 160GB classic will not sync error code 1437, Help please !

    Hi,    None of my ipods will sync with i tunes, error code 1437, running on windows XP have tried instructions to delete Lockdown folder but cannot find Application Data folder

    I can't find any solution for this, you can try to call Apple or visit an Apple Store / Premium Reseller.

  • TS3694 keep getting error code 1015 help please

    as title says i keep getting this error code while tryin to restore (1015)

    http://support.apple.com/kb/TS3694#error1015

  • Error Code: 1024 help please??

    Okay, here's my code
    this.onEnterFrame. omg = function (){}; countdowntimer
      function addEventListener(){}"callback_handler;)"
    var targetTime = targetTime.getTime();
    var timeLeft = targetTime - 670();
    var milisecond = Math.floor(timeLeft/100);
    var second = Math.floor(second/60);
    var decisecond = Math.floor(decisecond/10);
    var centisecond = Math.floor(centisecond/10);
    second = String(second % 60);
    if(second.length < 2){
      second = "0" + second;
    decisecond = String(decisecond % 10);
    if(decisecond.length < 2){
      decisecond = "0" + decisecond;
    centisecond = String(centisecond % 10);
    if(centisecond.length < 2){
      centisecond = "0" + centisecond;
      var counter:String = second + ":" + decisecond + ":" + centisecond;
      time_txt.text = counter;
    }else{
      trace("TIME'S }UP");
            var newTime:String = "00:00:00";
            time_txt.text = newTime;
            delete (this.onEnterFrame);
    I'm trying to create a customized countdown timer, and you'll notice on line 4, collumn 11, I keep getting the same error no matter how I change it...
    Can anyone tell me what is wrong??

    What is the actual error message indicating?  onEnterFrame is AS2, so that might be part of the problem if your intention is to be working in AS3.

  • Error Code 4450---- PLEASE HELP

    When I try to burn a CD of purchased I-tunes music
    Somewhere in the process of burning I get a "error code 4450" and the bur fails.
    This happens on anything I try to burn with I-tunes.
    I removed and re-installed I-tunes. And I can burn Cd's with my other burning programs but not I-Tunes????

    Yes, here it is... but I have used this same pack of cd's to burn many times before. so i do not think it is the cd, i dont know if that information helps or not...
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Dell Inc. Dell DM051
    iTunes 7.1.1.5
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0), DRVMCDB (1.0.0.1), DLACDBHM (1.0.0.1),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    RADEON X300 SE 128MB HyperMemory
    RADEON X300 SE 128MB HyperMemory Secondary
    Connected Device Information:
    DiskDrive, ST3160812AS, Bus Type ATA, Bus Address [0,0]
    CDROM, PHILIPS DVD+-RW DVD8801, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: PHILIPS DVD+-RW DVD8801, Rev 4D28
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 12 16.
    The drive CDRW speeds are: 12.
    The drive DVDR speeds are: 12.
    The drive DVDRW speeds are: 12.
    The last failed audio CD burn had error code 4450(0x00001162). It happened on drive D: PHILIPS DVD+-RW DVD8801 on CDR media at speed 12X.

  • Can anyone help with an Error Code 4450

    I keep trying to burn cd's and everytime that I do, itunes cancels the disk burn and gives me the error code 4450. can anyone help out with this? thanks..

    I am having the exact same problem! and now i can't access my pending downloads!! if anybody has any answers, i am begging you, please help me. if i can't fix this then i have wasted $40., so please, help me!

  • My compouter (PC) no longer recognizes my ipod (4th gen), it "sees" an unknowndevice and gives me error code 43.  Please help.

    My compouter (PC) no longer recognizes my ipod (4th gen), it "sees" an unknowndevice and gives me error code 43.  Please help.

    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • I keep getting error code 4450 when I'm trying to burn a CD from itunes.  It keeps my CD and won't eject it and says "cancelling burn" forever then itunes locks up and my cd is ruined and NO songs on it.

    i can't burn cd's in iTunes anymore. I get error code 4450 when I'm trying to burn a playlist. Songs from my own cd's, or bought in iTunes (have not burned 7x's as I can't BURN any cd's at all!),  Then my cd gets stuck in the drive. and it says "cancelling burn" forever and then itunes freezes up. I have a Dell with Windows 7.
    -I've slowed down the burn as slow as it can go
    -I have bought 3 different brands of cd's
    -i have the latest version of iTunes.
    Can someone help me?

    I have Windows 7 on a Dell.  Open and play iTunes in the compatability mode and use Windows XP (service pack 2).  Disregard any messsages to disable the compability mode.  This has worked for me.  I have also reinstalled iTunes and played with burn speeds etc.  These ideas did not work.  Compatability mode works.

  • I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?

    In 2012, I bought Photoshop CS6 Extended (education edition) for Mac. Now I want to install it on my new Macbook. I have the correct serial number and product code, but I receive an error message: the software may be a false copy etc....What to do?

    Here is a copy of the error
    This means : Installation failed.
    Verification of the Adobe Software failed
    The product you want to install is no valid Adobe product and seems to be falsified.
    HUgo
    Op 29-aug.-2014, om 23:42 heeft Jeff A Wright <[email protected]> het volgende geschreven:
    I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?
    created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
    Hugo please turn off your e-mail signature.
    If your serial number is listed as being valid at http://www.adobe.com/ then I would recommend obtaining a fresh copy of the installation files.  You can find details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
    To download a fresh copy of the installation files please see Download CS6 products.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6685617#6685617
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • File missing (file\BCD error code 0Xc0000034 help need for work!

    file missing (file\BCD  error code 0Xc0000034 help need for work!    what can i do?
    have an p 2000 notebook pc

     Hi bobkunkle, welcome to the HP Forums. I understand you cannot boot passed the error you are receiving.
    What is the model or product number of your notebook? What version of Windows is installed?
    Guide to finding your product number
    Which Windows operating system am I running?
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Keep Getting Error Code 4450

    I ran a diagnostic, here it is! I have burned 4 other CD's and now I'm having trouble...any help would be HUGELY APPRECIATED!!
    thanks,
    Amy
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Dell Computer Corporation Dimension 4600i
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), sscdbhk5 (1.0.0.1),
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: Intel(R) 82865G Graphics Controller\Intel(R) 82865G Graphics Controller
    IDE\DiskST380011A______________________________8.16___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomHL-DT-STCD-ROM_GCR-8483B_______________1.05___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomPhilipsDVD+RW_DVD8601__________________6D11___, Bus Type ATA, Bus Address [1,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: HL-DT-ST CD-ROM GCR-8483B, Rev 1.05
    Drive is empty.
    E: Philips DVD+RW DVD8601, Rev 6D11
    Drive is empty.
    The last failed audio CD burn had error code 4450(0x00001162). It happened on drive E: Philips DVD+RW DVD8601 on CDRW media at speed 4X.

    I have Windows 7 on a Dell.  Open and play iTunes in the compatability mode and use Windows XP (service pack 2).  Disregard any messsages to disable the compability mode.  This has worked for me.  I have also reinstalled iTunes and played with burn speeds etc.  These ideas did not work.  Compatability mode works.

  • How do i fix error code 4450

    i have tried several different brands of cd's, slowed down the burn speed below 8x and uninstalled/reinstalled itunes.
    I got a new PC - windows 7 and it keeps giving me error code 4450... it NEVER happened on my old computer....
    i've emailed Apple but nothing yet...
    HELP!!!!!

    WELL.... i decided to try to burn my cd in Windows Media and it worked fine!!!  So weird!!!  So, it's definitely something in iTunes I'm sad because I've used itunes for all my music / video / movie needs for YEARS - ever since the first generation ipod came out!  I love iTunes, but not since I got my new PC in December!
    I love my apple products (iphone, ipad, ipod touch) but have to say that Windows Media Player has resolved my problem (thank God!!!!)  and it's acutally very cool with Windows 7 - and it's very easy to navigate!
    I know I should've bought a Mac in December, which was what I really wanted, but I couldn't afford a Mac - had to go with a Dell!  

  • I get error code -8058 when attempting to copy and paste in Finder, I get error code -8058 when attempting to copy and paste in Finder

    I get "error code -8058" when attempting to copy and paste in Finder, I get error code -8058 when attempting to copy and paste in Finder. "Alt +Drag" works. Any ideas?

    Have a look at the 'More Like This' to the right - seem to be some solutions offered: >>>>>>>>>>>>>>>>>

  • TS1436 Trying to burn a cd disc and receive error code 4450.  What is this error code?

    When burning a CD disc, The progress bar doesn't move and then I get an error code: 4450.  My computer freezes up and no functions will work. I rebooted and downloaded the latest iTunes update but still receive error code 4450.  Anyone have suggestions for me.  Thank you for your response.

    I just thought I would try Force Quit Finder and Relaunch and it has worked. Sorry for wasting anyone's time.

Maybe you are looking for

  • During automatic PO in inventory management(MIGO)

    hi,   while creating automatic PO in inventory management(MIGO), it is throwing an error "Cost element 281500 in CO area 1000 does not exist for 11/25/2008" how to resolve this pls....? Regards, Prasath.

  • Changing a document name opens the file

    I was wondering if this was a new issue with Leopard... or just my mouse. In Tiger, if you needed to change the name of a file, or folder on the desktop... or anywhere, you could click, and it would highlight the words to change the name. Now, if you

  • IWeb won't open--has error message

    iWeb is on my dock...when I click the icon this error message appears: Can't open file "~/Downloads/session-2.cgi." I have two large websites on it and can't lose all my work! Help!

  • Create a purchase order linked to sale order with DI

    Hello all, I tried to create a purchase order based on a sale order with the DI but I get an error message "the business partner selected in base document is different than the target document" As you understand, this is normal to have a different bu

  • Master Page objects

    Bob, I can't find my previous thread, I don't even remember its name. So I am opening a new one, hope I'm not close to spamming by doing this. I had some problems with the objects on the master page, they didn't come out when exporting to PDF. Well,