Error Code, "Error occurred when creating frame..." in FCP 10.0.9

This happened to me when sharing to Apple ProRes.  My solution:  I switched the timeline view to frame view and discovered that the "bad" frame was actually outside my edited part.  So I just selected a range of what I wanted to export, excluding anything outside edited part, and it exported fine.

I was trying to deploy a Hibernate based application on WL 10.0 . I was getting this exception.
          your help would be greatly appreciated.

Similar Messages

  • The operation could not be completed because an error occurred when creating frame 2829 (error -1)

    I'm getting this error code in Final Cut Pro.  The operation could not be completed because an error occurred when creating frame 2829 (error -1). What does this mean and how can I fix it?  This code comes up when exporting. 

    Final Cut Pro X 10.0.8 and I'm running it on OS X 10.9.1.  I have been doing nothing different for the past few months. I have been creating a weekly video and exporting the same way and everything, but it just did this today for the first time. I have never had this error code before.

  • The operation could not be completed because an error occurred when creating frame 6105 (error -1).

    I am trying to share a project and after the 3% of sharing the project it appears this message.
    The operation could not be completed because an error occurred when creating frame 6105 (error -1).
    What can I do?? I need some help please!!

    You need to set the FCP X Preferences to count in frames, locate that frame, delete the clip around it and replace with a fresh one.

  • The operation could not be completed because an error occurred when creating frame 19788 (error -1).

    When attempting to build a quicktime movie from my video project on final cut pro I got this message    "The operation could not be completed because an error occurred when creating frame 19788 (error -1)".

    Kathy ...
    Better to post your topic in the Final Cut Pro community here.

  • The operation could not be completed because an error occurred when creating frame 570 (error -1)

    Hi everybody,just started with FCPX and the following occured:
    The operation could not be completed because an error occurred when creating frame 570 (error -1)
    Result is that i can not share to my hard disk.
    If anybody could help me out here....?

    CHange General preferences to show frames. Check what's happenING at the frame number. Maybe replace the shot.

  • The operation could not be completed because an error occurred when creating frame 30256 (error -1).

    When trying to export a project from FCPX, I get this error
    The operation could not be completed because an error occurred when creating frame 30256 (error -1).
    Has anyone any ideas?
    Many Thanks

    Switch your FCP preferences to show frames and see what's happen at that frame number. Try trash any render files. Switch off background rendering. Don't render. Try replacing the clip at the problem area.

  • Operation could not be completed because an error occured when creating frame 56 (error-1)

    Hi
    I'm trying to export a movie in motion but I keep getting the error "Export Failed. The operation could not be completed because an error occured when creating frame xx (error-1)".  I've tried some of the other suggestions such as preventing app nap, changing the codec used and I've uninstalled, rebooted, and reinstalled motion.  Nothing has worked so far, and it's driving me crazy!
    Can anyone suggest something?  I'd be most grateful.
    Thanks

    Hi GFXZen, thanks for your reply.
    I actually solved by re-exporting the source video, but I'll get to that (to skip, see TL;DR).  In case it helps anybody else I'll answer your questions first.
    The only element present at the majority of the failure points was another video, so there weren't any others to turn off.  Though when I turned off the video and exported, it actually worked (this is what led me to evaluate the source video rather than the motion project).
    Adjusting the export settings did not help me much, I tried h.264, same as source (which  was a .mov), and ProRes 4444: failed.  Tried as a draft: failed.  I didn't want to mess with any of the other render settings because to be honest, I'm not a video editor, so my experience with all of this is severely limited.
    I forgot to mention in the first post that I'd already tried the export on a different machine (one far newer and more powerful): failed.  Dispite googling image sequences, I wasn't really sure how this related to the video, or how to set things up so the audio was preserved, so I skipped that.
    TL;DR
    According to what I googled, it sounded like the video needed to be reindexed/exported/whatever, so I downloaded a program MPEG Streamclip (http://www.squared5.com/svideo/mpeg-streamclip-mac.html) 1.93b8 (as  the stable doesn't support Lion upward).  It's completely free, and when I ran it, worked first time.  I simply opened the video and exported to quicktime, and changed the compression to Apple TIFF.  That was it. 
    There was one unusual thing though, the file I started with was just over 1GB, but the end result was just over 4GB - but visually I couldn't see any loss in quality at all, and it worked in the motion project - which is really all that matters.
    Hope this helps somebody.

  • Please help i can't share my project I did try in all of them and it doesnt work it apears like that........ The share operation Master File has failed The operation could not be completed because an error occurred when creating frame 608 (error -1). and

    I did try in all of them and it doesnt work it apears like that........
    The share operation Master File has failed
    The operation could not be completed because an error occurred when creating frame 608 (error -1).
    and i dont know what to do plese hlp me....
    Re: when i try to share my project to quicktime aroun 50% appears error -1 and i can't share it what to do please help 

    Double post…

  • Why do I get this error: The operation could not be completed because an error occurred when creating frame 1364 (error -1).

    In motion 5, when I go to export - H.264 - I get this error: The operation could not be completed because an error occurred when creating frame 1364 (error -1). Why and How do I Fix It???

    What version of FCPX ?

  • What does "The operation could not be completed because an error occurred when creating frame 0 (error -1)." mean, and why does it keep happening?

    So I've been trying to export a video file from Motion 5 (and FCPX), and I keep recieving the message "The operation could not be completed because an error occurred when creating frame 0 (error -1)". I've found the problem has something to do with a video file in the project, Ive tried multiple versions of said file, in multiple formats (.mov, h264, etc.), and I keep getting the same result.  The file was originaly a 640x480 wmv file. Any suggestions?

    I ended up figuring out a solution, but I'll get to that in a sec.
    To answer your question, I converted the .wmv file in a program called Media Converter (available in the App store), and converted it to an h.264 file (then later to a .mov file, and then to an .mpg). I could view the file, and work with it in projects, but any project I tried to output with any version of said file, would result in the afor mentioned message, with the same results in FCPX (and Compressor 4 as well).  I tried multiple frame rates, resolutions, files types, re-converting the file, all with no luck.  My impression from said experiments, and reading other discussions was that it was a corrupt file. 
    Then I got frisky...and a little desperate. I brought the converted file (the .wmv to .mov) into Motion 4... and an export worked first try.  So I exported a pro-res file from Motion 4, and used that file in the already built Motion 5 project, and voila! 
    So, who knows what that means in real terms, as for the whats and whys.

  • Error Occurred when creating frame (Error -1)

    I have been working on a project in Motion 5 and recently on my 2009 MBP Intel Core 2 Duo and recently upgraded to an Core i7. I transferred all the project files and media over to the new machine but now when I export I get the error message  "The operation could not be completed because an error occurred when creating frame 346 (error -1).
    I've updated the OS (Mountain Lion) and Motion to the latest versions on both my old MBP and the new one.
    I've spent hours creating this and bought the new machine to get quicker render/export times but now it will not even export at all.
    I'm using a .mov file throughout my project which is at 30 FPS, but my Motion project is set at 24fps, could this be the cause? It didnt seem to matter on the project I was doing on my old MBP.
    Any advice would be great. Thanks

    What version is this? Are you using 10.0.9?

  • Error occurred when creating frame 3093 (error -1).

    Hi there,
    i need help on this. when i exporting a video from final cut pro x and it's appear a message
    error occurred when creating frame 3093 (error -1).
    Edmund

    What version is this? Are you using 10.0.9?

  • HT203477 Trying to make a Master copy. But I keep getting this The operation could not be completed because an error occurred when creating frame 2846 (error-1).How to correct it find the frame or?. I shot both 720p and 1080i also pictures Trying to do 10

    Trying to export my project as a mastercopy but keep getting error message  "creating frame 2846 error 1" I don't know what to do? do I try and find the frame and if I do how.

    I have the same error but i dont know how to thrash the render files and switch off background rendering.
    my problem is in the frame 6150 how to fix this problem. i need your help because i have to present this work for tomorrow

  • The operation could not be completed because an error occurred when creating frame 81 (error -1).

    Trying to share a finished VFX Motion template through the "export movie" option and keep getting this error.  Tried to simply publish as a template in FCPX and it shuts down FCPX every time.  Please Advise.
    Memory  4 GB 1333 MHz DDR3
    Processor  2.2 GHz Intel Core i7
    Graphics  AMD Radeon HD 6750M 512 MB

    I'm having the same problem on my iPad2 when I try to watch Al Jazeera English, which is a real bummer since I don't have a TV.  Maybe it's a bug in the latest OS or the latest Chrome update????
    HELP!!!!!!!!!!!!!!!!!!!!

  • The operation could not be completed because an error occurred when creating frame 113 (error -1)

    I tried to export my video in fcpx and i got this message someone could help me

    Kathy ...
    Better to post your topic in the Final Cut Pro community here.

Maybe you are looking for

  • Any Ideas For Sorting Rows When Planning Using Excel Interface

    Greetings Colleagues, I have a customer that is using BW-BPS with the Excel-In-Place user interface.  During end-user planning, users have expressed a desire to re-sort their data using a criteria different than that defined in the lead column of the

  • Temperature programmed desorption

    Hi, Does anyone have any experiences with temperature programmed desorption spectra taken with Labview? Any help would be appreciated Christian Ammon Christian Ammon Friedrich-Alexander Universitaet Erlangen Physikalische Chemie II Egerlandstrasse 3

  • Button Widget stops audio

    I'm using the button widget in Captivate 5, which is great. Except that it causes the slide audio to stop about 6.5 seconds into a slide - as though the slide becomes Inactive. I can't find a way to change this. Does anyone have a suggestion?

  • Flash stage size problem

    Am using Flash Pro CS5 and although the documentation for Flash Player 10 at the link below http://helpx.adobe.com/flash-player/kb/size-limits-swf-bitmap-files.html says that the max is 4050 by 4050. We are trying to run a swf in a  monitor array of

  • "cannot resolve symbol" when compiling a class that calls methods

    I am currently taking a Intro to Java class. This problem has my instructor baffled. If I have two classes saved in separate files, for example: one class might contain the constructor with get and set statements, the other class contains the main()