Error: Component failed to run due to a Object Package scheduling failure

Hi,
BusinessObjects XI R2 SP 5, FP 5.1
I am trying to schedule a group of reports (crystal reports) via a package where the output destination is to an email. At the event of execution of the scheduled time for the package; the package fails with the error: Component failed to run due to a Object Package scheduling failure. (Note: When scheduled individually it is successful and it was copied to the package from its original location, so there is no mistake in parameters or ODBC connections)
When we go to the history and within the instance, we see that some of the reports have the status as success and some are failed with the same error message. Even though some of the reports are made to fail at the event of 'NO DATA'; what I do not understand is that how come some of the other reports (which contains data and which works when trying to run manually or scheduled individually) are failing.
I would understand something is wrong when the entire package fails which is not the case here as say of 50 reports, 5 are successful and the rest fails with the same error.

Sorry posted on the wrong section...
Edited by: Deepu Philip on Mar 18, 2010 5:38 PM

Similar Messages

Object failed to run due to an error while processing on the Job Server

when i am scheduling a report ith email notification i am getting below error
error msg: Object failed to run due to an error while processing on the Job Server
i have configured email notification in bo cmc and server also SMTP enabled. while scheduling report to ueser i am getting error and even mails are delivered to users as well.

hi prithvi,
i am able to schedule reports to other destinations and reports are delivered as per the requirement.
i am able to telnet SMTP server from Adaptive job server machine on SMTP port.
have to check errors on log file....
@ COULD YOU PLEASE LET ME KNOW USER CAN SEND A MAIL TO USER IN SAME DOMAIN . WHILE SCHEDULING A REPORT AND AS OPTION AVAILABLE IN 4.0 LAUNCH PAD CAN HE SEND A MAIL DIRECTLY AFTER RUNNING REPORT.

Object failed to run due to insufficient security privileges

Recently migrated from BO XI and Crystal XI to bo 4.1sp2 and Crystal 2013.The recurring crystal reports were migared to new environemnt and schulded to run 1st of the month.There are 300+ reports.The report detail says all these reports are schduled by Adminisatrtor because It was migrated by administartor account.
First of the month all reports failed and error is 'object failed to run due to insufficient security privileges.
And In the event viewer, there were warning from source BusinessObject_cms
"The security for the object identified by 41173 could not be verified during schedule attempt."
Can someone help me to find out the root cause of this issue.thanks.

Hello,
There are many possible root causes.
First check that the migration was complete successfully using the Import Wizard or UMT.
Otherwise, this may occur if the owner was not migrated properly or if the universe contains some row level security..
I hope this helps.
Thanks & Regards,
Insaf

Latest iTunes XP download Error 6034 fails to run

Latest iTunes XP download Error 6034 fails to run

This should help:
http://docs.info.apple.com/article.html?artnum=304424

SSIS Job is getting failed with an error "0x00000005 : Failed to compiled scripts contained in the package.

Hi All. Could anyone resolve my issue.
I was created a package with an Script task written in VB.Net.
The Package was executing Successfully in BIDS.
But when i tried to exceute the same using Sql server Agent Job, Its getting Failed with the below error message
"Executed as user: Admin. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 5:12:27 PM Error: 2013-03-13 17:12:32.33
Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors.
End Error Error: 2013-03-13 17:12:32.33     Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict
in class 'ScriptMain'., ScriptMain.vb, 156, 22 End Error Error: 2013-03-13 17:12:32.36     Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: The binary
code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:34.28     Code: 0x00000005
Source: Formating Excel Sheet Formating Excel Sheet     Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors. End Error Error: 2013-03-13 17:12:34.28
Code: 0x00000005     Source: Formating Excel Sheet Formating Excel Sheet     Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict in class 'ScriptMain'., ScriptMain.vb, 191, 22 End Error
Error: 2013-03-13 17:12:34.29     Code: 0x00000005     Source: Formating Excel Sheet Formating Excel Sheet     Description: The binary code for the script is not found. Please open the script in the
designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:51.56     Code: 0x00000004     Source: Checking Alcon Files      Description:
The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:51.56     Code: 0xC0024107
Source: Checking Alcon Files      Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 5:12:27 PM Finished: 5:12:51 PM
Elapsed: 24.336 seconds. The package execution failed. The step failed."
Please give some solution to this.
Thanks in advance

Are you editing this job in SQL 2012? Is it wrapping your paths in \"? Like for example does the command line tab on the step look like this:
/FILE "\"D:\yourPathGoesHere.dtsx\"" /CONFIGFILE "\"D:\yourPathGoesHere.dtsConfig\"" /CHECKPOINTING OFF /REPORTING E
That's the problem I had, and I resolved it by recreating the whole thing via SQL Script and getting rid of all those \" things. I think that is preventing SSIS from looking up the precompiled binaries for your Script Task. So you should edit the command
line manually:
/FILE "D:\yourPathGoesHere.dtsx" /CONFIGFILE "D:\yourPathGoesHere.dtsConfig" /CHECKPOINTING OFF /REPORTING E
Please write back whether that helps you. David Dye's answer didn't help me at all.

Configuration Manager - Fails to run due to Administrator rights

Hi All,
I solved this issue for a client today when running configuration Manager during installation.
After asking for the language it gives the error: ALC-LCM-000-020 "Failed to launch Configuration Manager".
The Configuration Manager log file contains the stack trace below.
It was very similar to this issue (reported in Cold Fusion): http://forums.adobe.com/thread/228722
I discovered the installation was running from a domain administrator account, which had Windows Explorer Shell paths locked out.
I got them create a local administrator account (not a domain account), and it worked
Good luck!
Tim
[2011-07-19 12:02:29,687], INFO, AWT-EventQueue-0, com.adobe.livecycle.lcm.core.LCMDataManager, Loading config: /lcm-config.xml
[2011-07-19 12:02:32,360], SEVERE, AWT-EventQueue-0, com.adobe.livecycle.lcm.gui.LCMGUI, Failed to launch GUI
java.lang.RuntimeException: java.io.IOException: Could not get shell folder ID list
at sun.awt.shell.Win32ShellFolderManager2$ComInvoker.invoke(Unknown Source)
at sun.awt.shell.Win32ShellFolder2.getFileSystemPath(Unknown Source)
at sun.awt.shell.Win32ShellFolderManager2.getPersonal(Unknown Source)
at sun.awt.shell.Win32ShellFolderManager2.get(Unknown Source)
at sun.awt.shell.ShellFolder.get(Unknown Source)
at sun.swing.WindowsPlacesBar.<init>(Unknown Source)
at com.sun.java.swing.plaf.windows.WindowsFileChooserUI.updateUseShellFolder(Unknown Source)
at com.sun.java.swing.plaf.windows.WindowsFileChooserUI.installComponents(Unknown Source)
at javax.swing.plaf.basic.BasicFileChooserUI.installUI(Unknown Source)
at com.sun.java.swing.plaf.windows.WindowsFileChooserUI.installUI(Unknown Source)
at javax.swing.JComponent.setUI(Unknown Source)
at javax.swing.JFileChooser.updateUI(Unknown Source)
at javax.swing.JFileChooser.setup(Unknown Source)
at javax.swing.JFileChooser.<init>(Unknown Source)
at javax.swing.JFileChooser.<init>(Unknown Source)
at com.adobe.livecycle.lcm.gui.widgets.BrowsePanel.<init>(BrowsePanel.java:78)
at com.adobe.livecycle.lcm.feature.configureLC.ConfigureFontsDialog.initialize(ConfigureFont sDialog.java:241)
at com.adobe.livecycle.lcm.feature.configureLC.ConfigureFontsDialog.<init>(ConfigureFontsDia log.java:106)
at com.adobe.livecycle.lcm.feature.configureLC.ConfigureFontsDialog.<init>(ConfigureFontsDia log.java:93)
at com.adobe.livecycle.lcm.gui.WizardSequenceInitializer.initWizards(WizardSequenceInitializ er.java:392)
at com.adobe.livecycle.lcm.gui.LCMMainFrame.initWizards(LCMMainFrame.java:510)
at com.adobe.livecycle.lcm.gui.LCMMainFrame.<init>(LCMMainFrame.java:137)
at com.adobe.livecycle.lcm.gui.LCMGUI.createAndShowGUI(LCMGUI.java:238)
at com.adobe.livecycle.lcm.gui.LCMGUI.access$000(LCMGUI.java:49)
at com.adobe.livecycle.lcm.gui.LCMGUI$1.run(LCMGUI.java:95)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)

I think this can be fixed by parsing / registering the sqlmgmproviderxpsp2up mof file.
Have a look here - http://blogs.msdn.com/echarran/archive/2006/01/03/509061.aspx
Thanks, Leks
That was the first thing I tried :)
I've also tried this: http://social.msdn.microsoft.com/Forums/en/sqltools/thread/468b8484-2729-4a06-bfc3-efe54507dcb6
and this: http://msmvps.com/blogs/martinpoon/archive/2009/11/27/sql-server-configuration-manager-cannot-connect-to-wmi-provider-invalid-class-0x80041010.aspx
and that: http://www.nucleustechnologies.com/Repair-WMI-Services.php
and some other stuff I could find.
At least I've tried to repair Sql 2008 installation. But it also did not work.
Lastly I've uninstalled all the instances and components related with sql. And I renamed the folders (C:\Program Files\Microsoft SQL Server and the hidden folder C:\ProgramData\Microsoft\Microsoft SQL Server) and made a clean install. Voila, it worked!
But the "Sql Server Configuration Manager"s icon has gone somewhere :) Anyway it works fine now.
I had to do that because I have a project to finish.
Poor Microsoft!

I used Instruments (Xcode developer tool) before with no issues but now getting error: "Target failed to run: Permission to debug com.cnn.iphone was denied.The app must be signed with a development identity (e.g. iOS Developer)". How to fix it?

I have used this tool before to analyze any application, such as CNN, in the past. But it is not working anymore and giving same error for all applications. Please advise.

The application (one wants to run instruments libraries on) has to be in running state and then select from the 'Running Applications' category and not from the 'Installed Apps' category and that should work.

Failed to run task sequence. Error occurred while starting the task sequence (0x8007000E)

Hi there
Patch Tuesday yesterday (10th June2014). As always we deploy new patches first to a test collection where Windows 7 updates automatically apply.
Upon trying to rebuild any of the machines in this test collection, we were presented with the following error message:
Failed to run task sequence. Error occurred while starting the task sequence (0x8007000E)
After searching about this, I found this page from Niall Brady, which explained the problem:
http://www.niallbrady.com/2013/05/17/after-selecting-a-task-sequence-in-configuration-manager-2012-sp1-you-receive-threadtoresolveandexecutetasksequence-failed-code0x8007000e-in-smsts-log/
So I removed some of the machines from the test Windows update collection, and as per the advice in the above link, the error was gone and those machines could be built successfully.
So the problem is there were too many many policies downloaded (apps, packages and most of all updates) for the task sequence ram to store, hence the error.
Now...
...I have a question.
The next logical step to my mind is to patch our OS image with all missing patches, so these do not have to be downloaded at build time. Niall mentions this as one of the resolutions to this issue.
However there seems to be some confusion over whether this would actually make a difference.
I read through this link:
http://social.technet.microsoft.com/Forums/en-US/7e597b44-2586-4063-b6d0-cec48a7c11c7/sccm-2012-task-sequence-failure-0x8007000e?forum=configmanagerosd
There's seems to be no consensus on this.
Is SCCM 2012 clever enough to - when the task sequence is first started - to download ONLY the updates (policies) it detects as NOT present in the OS image...
or
Will it simply try to download policies for ALL items deployed to it, whether the updates are present in the OS image or not?
I will be disappointed if SCCM 2012 SP1 CU2 isn't clever enough to only download policies at build time for the apps, packages and updates it detects as needed.
I'd be grateful for some clarity on this.
Regards,
John, Glasgow.

Hi Jason
Thank you for replying, I appreciate it.
1) We currently have 15 or 16 software update groups for Office updates, dating back a month or two. The latest software update group contains all the patches in the previous software update groups plus the patches released on 10th June. Do you recommend
deleting all but the latest software update group?
2) I'm almost reluctant to ask this, but based on what you have advised, is it the case that when the task sequence executes, it will download policies for each update in each software update group regardless of whether it has already downloaded a policy
for an update in a previous software update group? So in effect it's downloading policies (for updates) it has already downloaded?
3) I'm not clear on why there would be no policy for an image; in Niall Brady's informative page on the 8007000E error, he writes the following:
"The reason it has run of space could be due to four possibilites: too many applications, too many Windows updates, too many Task Sequence steps, too many referenced packages'.
Can you shed some light on why there isn't a policy for an image?
Thanks again for replying,
John.

Failed to Run Task Sequence (Error 0x80070032)

Hello folks
We just setup the productive SCCM environment and successfully staged many clients. But with one we have some trouble.
I have added the Client with the Hostname and MAC address into SCCM
Added the Client into the Collection where the Task Sequence for staging is applied
Made a boot image on CD-ROM and booted up the client
He can successfully connect to the SCCM Server and also get the right ask Sequence
Bevor starting downloading the Vista OS WIM, the following Error occure:
Failed to Run Task Sequence
An error occured while starting the task sequence (0x80070032).
For more information, please contact ....
I used the Boot CD-ROM successfully on other clients without any problem.
The same Task Sequence was working perfect on other clients
All Clients are HP DC7800 SFF Desktops
BIOS Settings are default by all the Clients
Have tested the same Client on the Test SCCM Environment and got the same problem.
Deleted the Client and re-added it into the SCCM Server
Tried to use different network cable on different location
Client successfully get a DHCP IP address
We have all done so far as I have the knowledge. Any help would kindly be appreachate.
Kind regards
Stefan

Hi folks
As seen in another thread (http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=2592075&SiteID=17) that the local smsts.log file located in x:\windows\temp\smstslog\ will help to analyse whats happen in the background, I have seen the following line in the Log:
The active system partition on a MBR system must be NTFS
and
Failed to prepare the system partition for staging.
The request is not supported. (Error: 80070032; Source: Windows)
and
Failed to stage WinPE. Code(0x80070032)
So, I did the steps informed in the other thread to press F8 durcing the Error and used the following in the DOS Box:
Diskpart
Select Disk 0
Clean
After that steps, the Bootprocess worked perfect. It seams that the Disk was partitioned not that good, that WinPE could handle it.
Hope this helps other for analysing.
Cheers
Stefan

Offline OSD Failed to Run Task Sequence 0x80004005

hi Folks.. I am getting this error message "
Failed to Run Task Sequence 0x80004005
when trying to do an offline build via DVD generated from SCCM 2012 R2. Its failing on the applying OS step. Pxe boot build works fine. I've put the smsts log file below. Any help/ advice appreciated.

hi. Apologies there is a restriction on the amount of characters for text so can cannot post the entire smsts log.
here is the step its failing on.
<![LOG[Start executing an instruction. Instruction name: Install Operating System. Instruction pointer: 0]LOG]!><time="03:51:00.239+480" date="01-19-2015" component="TSManager" context="" type="1"
thread="716" file="engine.cxx:116">
<![LOG[Set a global environment variable _SMSTSCurrentActionName=Install Operating System]LOG]!><time="03:51:00.239+480" date="01-19-2015" component="TSManager" context="" type="0" thread="716"
file="executionenv.cxx:668">
<![LOG[Set a global environment variable _SMSTSNextInstructionPointer=0]LOG]!><time="03:51:00.239+480" date="01-19-2015" component="TSManager" context="" type="0" thread="716" file="executionenv.cxx:668">
<![LOG[The group (Install Operating System) has been successfully started]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context="" type="1" thread="716" file="instruction.cxx:156">
<![LOG[Do not send status message in full media case]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context="" type="1" thread="716" file="utils.cpp:5763">
<![LOG[User did not specify local data drive]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context="" type="0" thread="716" file="utils.cpp:1974">
<![LOG[Volume D:\ is not a fixed hard drive]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context="" type="1" thread="716" file="utils.cpp:1077">
<![LOG[Volume X:\ is not a fixed hard drive]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context="" type="1" thread="716" file="utils.cpp:1077">
<![LOG[TSM root drive = ]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context="" type="1" thread="716" file="utils.cpp:1142">
<![LOG[We do not find an available volume to store the local data path]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context="" type="1" thread="716" file="utils.cpp:1989">
<![LOG[Set a global environment variable _SMSTSNextInstructionPointer=1]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context="" type="0" thread="716" file="executionenv.cxx:668">
<![LOG[Set a TS execution environment variable _SMSTSNextInstructionPointer=1]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context="" type="0" thread="716" file="executionenv.cxx:386">
<![LOG[Set a global environment variable _SMSTSInstructionStackString=0]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context="" type="0" thread="716" file="executionenv.cxx:668">
<![LOG[Set a TS execution environment variable _SMSTSInstructionStackString=0]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context="" type="0" thread="716" file="executionenv.cxx:414">
<![LOG[Save the current environment block]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context="" type="0" thread="716" file="executionenv.cxx:833">
<![LOG[pszPath[0] != L'\0', HRESULT=80070057 (e:\nts_sccm_release\sms\framework\core\ccmcore\path.cpp,60)]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context="" type="0"
thread="716" file="path.cpp:60">
<![LOG[Filesystem::Path::Add(sEnvPath, EnvDataFileName, sEnvPath), HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,676)]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context=""
type="0" thread="716" file="environmentlib.cpp:676">
<![LOG[Failed to save environment to (80070057)]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context="" type="2" thread="716" file="environmentlib.cpp:697">
<![LOG[TS::Environment::SharedEnvironment.saveEnvironment(szPath), HRESULT=80070057 (e:\nts_sccm_release\sms\client\tasksequence\executionengine\executionenv.cxx,842)]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager"
context="" type="0" thread="716" file="executionenv.cxx:842">
<![LOG[Failed to save the current environment block. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance.
The parameter is incorrect. (Error: 80070057; Source: Windows)]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context="" type="3" thread="716" file="executionenv.cxx:842">
<![LOG[SaveEnvironment(), HRESULT=80070057 (e:\nts_sccm_release\sms\client\tasksequence\executionengine\executionenv.cxx,420)]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context=""
type="0" thread="716" file="executionenv.cxx:420">
<![LOG[Failed to persist execution state. Error 0x(80070057)]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context="" type="2" thread="716" file="executionenv.cxx:426">
<![LOG[Failed to save execution state and environment to local hard disk]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context="" type="2" thread="716" file="engine.cxx:249">
<![LOG[Start executing an instruction. Instruction name: Restart in Windows PE. Instruction pointer: 1]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context="" type="1"
thread="716" file="engine.cxx:116">
<![LOG[Set a global environment variable _SMSTSCurrentActionName=Restart in Windows PE]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context="" type="0" thread="716"
file="executionenv.cxx:668">
<![LOG[Set a global environment variable _SMSTSNextInstructionPointer=1]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context="" type="0" thread="716" file="executionenv.cxx:668">
<![LOG[Set a local default variable SMSRebootMessage]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context="" type="0" thread="716" file="executionenv.cxx:700">
<![LOG[Set a local default variable SMSRebootTimeout]LOG]!><time="03:51:00.255+480" date="01-19-2015" component="TSManager" context="" type="0" thread="716" file="executionenv.cxx:700">
<![LOG[Set a global environment variable _SMSTSLogPath=X:\windows\TEMP\SMSTSLog]LOG]!><time="03:51:00.255+480" date="01-19-2015"

Error while running bulk insert in SSIS package

Hi:
I have an error when I am running bulk insert in SSIS package.
I have implemented an SSIS package to update master data directly from R/3, R/3 gives the file in a specified format, I take this and insert all the records into a temporary table and then update mbr table and process the dimension.
This works perfectly well in our development system where both our app server and sql server on the same box. But in QAS, the 2 servers are separate and when I try to run the SSIS package I get the below error.
We have tested all connections and are able to access the path and file from both app server and sql server using the shared folder. Our basis team says that it is a problem with bulk insert task and nothing to do with any authorization.
Has anyone experienced with this sort of problem in multi server environment? Is there another way to load all data from a file into bespoke table without using bulk insert.
Thanks,
Subramania
Error----
SSIS package "Package.dtsx" starting.
Error: 0xC002F304 at Insert Data Into Staging Table (Account), Bulk Insert Task: An error occurred with the following error message: "Cannot bulk load because the file "
msapbpcapq01\dim\entity.csv" could not be opened. Operating system error code 5(Access is denied.).".
Task failed: Insert Data Into Staging Table (Account)
SSIS package "Package.dtsx" finished: Success.
The program '[2496] Package.dtsx: DTS' has exited with code 0 (0x0).

Hi Subramania
From your error:
Error: 0xC002F304 at Insert Data Into Staging Table (Account), Bulk Insert Task: An error occurred with the following error message: "Cannot bulk load because the file "
msapbpcapq01\dim\entity.csv" could not be opened. Operating system error code 5(Access is denied.).".
Let say, server A is where the file entity.csv is located
Please check the Event Viewer->Security of Server A at the time when the SSIS run, there must be an entry with Logon Failure and find what user was used to access the shared path.
If your both servers are not in a domain, create the user in server A with the same name and password and grant read access to the shared folder.
The other workaround is grant read access to Everybody on the shared folder.
Halomoan
Edited by: Halomoan Zhou on Oct 6, 2008 4:23 AM

HSRP fails to work due to h/w failure

We have a situation that HSRP fails to work due to a partial h/w failure on the active router.
What happened is the active router continously getting input error on its Ethernet interface. User traffic fails to be received by this router. However the router is still able to send hello message to its standby router .When we do a sh standby on the active router, it says unknown standby which concluded that it does not receive hello message from the standby. The fault happened everyday . we can clear the problem by rebotting the router but fault came back the next day again for several times. Once we replaced the active router , problem did not return.
In understand HSRP uses mulitcast protocol . but I would like clarification that HSRP is using unidirectional comunication with the standby group. In a situation like this ,my assumption is the TX circuit on the LAN is working but teh RX circuit failed. The standby router would never know the LAN interface of actice router fails to receive its hello messages. Therefore the fail over never trigger.
Appreciate your feedback on this.
Regards
Edmond

I believe HSRP use multicast address for the hello but it still use broadcast to ensure the standby router is active. I can't find such info. to prove it. Please correct me if I am wrong.
For the LAN connection, if the RX is failed, the interface should not up, or say, e.g. if the RX-pair of cable is not connectioned, the interface should down. So, I believe there is something wrong in the LAN interface, it may not only the RX side error.
Just my 2 cents.

Error invoking Package Schedule Status in BPC 5.1

Hi BPC Gurus,
We are on BPC 5.1 system and have been live since Apr 2008. We schedule all our Data Manager jobs (Import packages and other packages) every month using the Package Schedule status option under eData.
We were performing a clean-up of the older job entries on this screen by choosing the "Delete Job" option in Package Schedule Status screen.
A few of them got successfully deleted but then we got the below error.
"(RunQueryToServer)(GetScheduleList) An error occurred while getting a schedule list. The system cannot find the file specified."
We are now getting this error even if we try to bring up the Package Schedule Status screen.
Could you pls. advise if anybody has seen this issue and what was the resolution.
We are seeing this issue in our Production environment so your help would be greatly appreciated.
Thanks,
Abhay Shanbhag

We had the same problem with the installation I'm working on right now.
In our case, I went into the SQL Server database for my application set and looked at the entries in tblSchedule. There were entries in there that were very strange in the "CreateTime" field. Dates like "2008-43-30 <time>".
We cleared out the records in tblSchedule and this solved the problem.
Hope this helps,
Jason

The package failed to load due to error 0xC0011008

I am trying to run a SSIS Package from SQL Server BI Studio. I receive the error "The package failed to load due to error 0xC0011008". SQL Server 2008 R2 installed (32bit Win 7), along with Integration Services. The Package connects
to a SQL Server DB.
Here is the full error taken from consol in BI Studio:
SSIS package "CreateDynSSIS_DB_RunDynSSiSDB.dtsx" starting.
Error: 0x1 at ST_Gen_Pkg_Src_SqlServ: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008
"Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
---> System.Runtime.InteropServices.COMException (0xC0011008): The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was
passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
   at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.LoadPackage(String FileName, Boolean loadNeutral, IDTSEvents100 pEvents)
   at Microsoft.SqlServer.Dts.Runtime.Application.LoadPackage(String fileName, IDTSEvents events, Boolean loadNeutral)
   --- End of inner exception stack trace ---
   at ST_0f39f89613ca43e9a6660953aa72fa2c.csproj.ScriptMain.Main()
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig,       MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
   at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
   at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
Task failed: ST_Gen_Pkg_Src_SqlServ
Warning: 0x80019002 at CreateDynSSIS_DB_RunDynSSiSDB: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "CreateDynSSIS_DB_RunDynSSiSDB.dtsx" finished: Failure.
The error is thrown at this line:
DynamicPackage = app.LoadPackage(DynamicPackagePath, null);
Any help would be great! I've done a bit of Googling on the topic already.. and nothing has worked so far.

Hi,
Reason for the error: Old
version of the DTEXEC is picked up by SQL Server instead of the new one.
Refer this link for more info
THE PACKAGE FAILED TO LOAD DUE TO ERROR 0XC0011008
Hope this info Helps

Administrator software failed to start due to an unexpected error

Not a terribly useful message from ARD after a fresh install of 10.5.3:
"The Remote Desktop Administrator software failed to start due to an unexpected error."
"The Remote Desktop software may not be installed correctly or the computer may require a restart"
It installed something in the system on first launch then popped up with this message. My main concern is that it pooched my system in the process by replacing something new in Mac OS X 10.5.3 with something old from ARD 3.2...
Restarting now but who knows, might not be back for a while... %-\

Kill the "ARDAgent" program, either in Activity Monitor or Terminal, and it will start back up again. When you see it running again(make sure it's a new instance via the PID), you should be able to start Remote Desktop up without any problems after that.

Error: Component failed to run due to a Object Package scheduling failure

Similar Messages

Maybe you are looking for