Error connecting to the SAP SRV on Windows 2008 Server platform

Hi All
We have a problem with one of our clients they bought a new sbs windows server 2008 and we loaded sql 2005 and sap b1 SP01 PL07.
When we did the SBO install we experience connection issues and we created odbc connection on the server using named pipes and tcp/ip (used both server name and Ip address).
We also configured the server in configuration manager and we managed to login and solved the slow system connection issue. We also created odbc connection on the client machines. (Machine are on a workgroup and users have administration access on all machines),we also installed native client on all machines.
After the first batch of client installs we managed to have connection, they were other computers which were left out during the first client install and now the client want to do the remaining machines connected to SBO. On every machine that we install now we get the same error :-
*Connection failed:
SQLState:'08001'
SQl Server error:10060
[Microsoft][SQL Native Client] TCP Provider: A connection attempt failed because the connected party didnot properly repsond after a period of time, or established connection failed because connected host has failed to respond.
Connectioin failed:
SQLState:'HYT00'
SQL Server Error:0
[Microsoft][SQL Native Client]Login timeout expired
Connection failed:
SQLState:'08001'
SQL Server Error: 10060
[Microsoft][SQL Native client] An error has occurred while establishing a connection to the server. When connecting to the sql server 2005, this failure may be cause by the that*
Please help as most user who need access can't login and they are the main users.
rgds,
Bongani Dlamini

Hi Eric,
yes we are using Windows 2008 SBS for the SAP EHP4 FOR SAP ERP 6.0/NW7.01 installation.
we tried to create the key but it says access is denied.
Actual thing is we got the server with Windows 2008 server 64 bit SBS (standard FE) with Domain Controller (DC) configuration.
We have removed the DC using dcpromo to convert into Wokgroup and tried the SAP installation.
I hope you got the idea and please let me know any further suggestions or it is the problem with the license.
Thanks & Regards,
Prabhu Reddy.

Similar Messages

Error while installaing First MSCS Node in windows 2008 server

Dear Gurus,
I am facing a problem while installing the First MSCS Node on Windows Server 2008 SP2 with MSSQL.
SAP: SAP ERP 6.0 SR3
OS: Windows Server 2008 SP2
MSS: MSSQL Server 2005 SP3
please follow the below sapinst log.
WARNING 2009-12-19 18:20:06.992
Execution of the command "change user /install" finished with return code 1. Output:
Install mode does not apply to a Terminal server configured for remote administration.
INFO 2009-12-19 18:20:06.999
Execute step replaceDLLs of component |MSCS_A|windows|ind|ind|ind|0|0|FirstSteps|windows|ind|ind|ind|0|0
INFO 2009-12-19 18:20:07.007
File not found: [C:/Users/ADMINI~1.JYO/AppData/Local/Temp/2/sapinst_exe.840.1261226937/msvcp71.dll].
INFO 2009-12-19 18:20:07.008
File not found: [C:/Users/ADMINI~1.JYO/AppData/Local/Temp/2/sapinst_exe.840.1261226937/msvcr71.dll].
INFO 2009-12-19 18:20:07.13
Execute step registerEventsDll of component |MSCS_A|windows|ind|ind|ind|0|0|FirstSteps|windows|ind|ind|ind|0|0
INFO 2009-12-19 18:20:07.38
Execute step NTpatch of component |MSCS_A|windows|ind|ind|ind|0|0|FirstSteps|windows|ind|ind|ind|0|0
INFO 2009-12-19 18:20:07.51
Execute step AddPrivileges of component |MSCS_A|windows|ind|ind|ind|0|0|FirstSteps|windows|ind|ind|ind|0|0
INFO 2009-12-19 18:20:07.078
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'JYOTISAP\Administrator' on host '.'.
INFO 2009-12-19 18:20:07.87
Execute step sExtractClusterDLLs of component |MSCS_A|windows|ind|ind|ind|0|0|PrepareSAPClusterResource|windows|ind|ind|ind|1|0
INFO 2009-12-19 18:20:07.105
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\HA\ABAP\MSCS-A\NTCLUST.log.
INFO 2009-12-19 18:20:07.108
Output of C:\Users\ADMINI~1.JYO\AppData\Local\Temp\2\sapinst_exe.840.1261226937\SAPCAR.exe is written to the logfile NTCLUST.log.
INFO 2009-12-19 18:20:07.297
Output of C:\Users\ADMINI~1.JYO\AppData\Local\Temp\2\sapinst_exe.840.1261226937\SAPCAR.exe -x -v -g -i -f F:/DUMP/Inst-Master\IM_WINDOWS_X86_64\NTCLUST.SAR,:
SAPCAR: processing archive F:/DUMP/Inst-Master/IM_WINDOWS_X86_64/NTCLUST.SAR (version 2.01)
x NTCLUSTER/SapClus.dll
x NTCLUSTER/Saprc.dll
x NTCLUSTER/Saprcex.dll
x NTCLUSTER/coclgrp.exe
x NTCLUSTER/crclgrp.exe
x EXE/disablewp.exe
x NTCLUSTER/disaprct.exe
x EXE/enablewp.exe
x NTCLUSTER/insaprct.exe
x NTCLUSTER/rfcoscol.exe
x NTCLUSTER/takeresoff.exe
x NTCLUSTER/takereson.exe
SAPCAR: 12 file(s) extracted
INFO 2009-12-19 18:20:07.310
Execute step sCopySAPClusterDLLs of component |MSCS_A|windows|ind|ind|ind|0|0|PrepareSAPClusterResource|windows|ind|ind|ind|1|0
INFO 2009-12-19 18:20:07.617
Execute step sRegisterSAPClusterDLL of component |MSCS_A|windows|ind|ind|ind|0|0|PrepareSAPClusterResource|windows|ind|ind|ind|1|0
INFO 2009-12-19 18:20:07.629
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\HA\ABAP\MSCS-A\insaprct.log.
INFO 2009-12-19 18:20:07.633
Output of insaprct.exe is written to the logfile insaprct.log.
INFO 2009-12-19 18:20:07.950
Execution of the command "insaprct.exe" finished with return code 0. Output:
SAP Resource
Resourcetype "SAP Resource" successfully installed
INFO 2009-12-19 18:20:07.964
Execute step dScanForDrives of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows|ind|ind|ind|2|0
INFO 2009-12-19 18:20:08.34
Execute step AskForInstanceType of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows|ind|ind|ind|2|0
INFO 2009-12-19 18:20:15.341
Execute step dInvokeInstanceInformationClusterA of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows|ind|ind|ind|2|0
INFO 2009-12-19 18:21:46.263
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\HA\ABAP\MSCS-A\cluster.exe.log.
INFO 2009-12-19 18:21:46.268
Output of cluster.exe RESOURCE "SAP JRP 00 Service" is written to the logfile cluster.exe.log.
WARNING 2009-12-19 18:21:46.302
Execution of the command "cluster.exe RESOURCE "SAP JRP 00 Service"" finished with return code 5007. Output:
Listing status for resource 'SAP JRP 00 Service':
Resource             Group                Node            Status
System error 5007 has occurred (0x0000138f).
The cluster resource could not be found.
INFO 2009-12-19 18:21:46.369
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\HA\ABAP\MSCS-A\msg_server.exe.log.
INFO 2009-12-19 18:21:46.378
Working directory changed to C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\HA\ABAP\MSCS-A.
INFO 2009-12-19 18:21:46.381
Output of L:\usr\sap\JRP\ASCS00\exe\msg_server.exe -v is written to the logfile msg_server.exe.log.
INFO 2009-12-19 18:21:46.417
Execution of the command "L:\usr\sap\JRP\ASCS00\exe\msg_server.exe -v" finished with return code 0. Output:
msgserver information
kernel release                700
kernel make variant           700_REL
DBMS client library
compiled on                   NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00
compiled for                  64 BIT
compilation mode              UNICODE
compile time                  Jan 23 2008 20:12:02
update level                  0
patch number                  137
source id                     0.144
supported environment
database (SAP, table SVERS)   700
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
msgserver patch information
( 0.001) MS: enable server shutdown (note 821875)
( 0.001) MS: dont bind external port for SCS instance (note 821875)
( 0.002) MS: new pseudo parameter rdisp/msserv_no (note 834052)
( 0.007) CST patch collection 21 2005 (note 845887)
( 0.011) CST patch collection 24 2005 (note 851195)
( 0.014) CST Patch Collection 28 2005 (note 860319)
( 0.018) CST Patch Collection 31 2005 (note 867690)
( 0.023) CST Patch Collection 36 2005 (note 874665)
( 0.023) CST Patch Collection 37 2005 (note 877058)
( 0.023) VMC Patch Collection 6 (note 865932)
( 0.026) CST Patch Collection 39 2005 (note 884266)
( 0.033) CST Patch Collection 45 2005 (note 895230)
( 0.034) J2EE engine can't reconnect (note 895230)
( 0.036) CST Patch Collection 49 2005 (note 904777)
( 0.046) CST Patch Collection 06 2006 (note 921223)
( 0.049) CST Patch Collection 09 2006 (note 928898)
( 0.050) Avoid deadlock in exception handler, when writing the stacktrace (note 907123)
( 0.053) CST Patch Collection 14 2006 (note 937223)
( 0.057) CST Patch Collection 17 2006 (note 944284)
( 0.060) CST Patch Collection 22 2006 (note 950845)
( 0.065) P4HTTP added as logon type (note 958374)
( 0.065) CST Patch Collection 26 2006 (note 957514)
( 0.069) CST Patch Collection 29 2006 (note 962917)
( 0.073) CST Patch Collection 33 2006 (note 970657)
( 0.079) CST Patch Collection 39 2006 (note 981959)
( 0.083) CST Patch Collection 42 2006 (note 991211)
( 0.087) CST Patch Collection 47 2006 (note 999284)
( 0.094) CST Patch Collection 03 2007 (note 1017050)
( 0.096) Fix for HTTP Redirect with unusual Query String in URL (note 1021425)
( 0.098) CST Patch Collection 08 2007 (note 1027100)
( 0.105) CST Patch Collection 13 2007 (note 1039566)
( 0.110) CST Patch Collection 19 2007 (note 1051296)
( 0.110) CST Patch Collection 19 2007 (note 1051296)
( 0.116) CST Patch Collection 26 2007 (note 1067668)
( 0.118) ICM: AGS logging enhancements (filter, HTTP header) (note 851852)
( 0.121) CST Patch Collection 29 2007 (note 1076241)
( 0.128) NI: TCP connect fails with EINVAL on AIX (note 1087831)
( 0.133) CST Patch Collection 42 2007 (note 1104914)
( 0.133) CST Patch Collection 42 2007 (note 1104914)
( 0.137) CST Patch Collection 47 2007 (note 1115331)
( 0.137) Higher values for parameter gw/max_sockets than 2048 (note 1117484)
( 0.137) Values > 2048 don't work for max_sockets in msg_server (note 1117484)
( 0.137) Correction on 2048 sockets in msg_server (note 1117484)
INFO 2009-12-19 18:21:46.468
Execute step dInvokeAddInInstanceInformationClusterA of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows|ind|ind|ind|2|0
INFO 2009-12-19 18:21:46.482
Execute step dInvokeInstanceInformationClusterB of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows|ind|ind|ind|2|0
INFO 2009-12-19 18:21:46.495
Execute step dInvokeAddInInstanceInformationClusterB of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows|ind|ind|ind|2|0
INFO 2009-12-19 18:21:46.507
Execute step sSetGlobalParameters of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows|ind|ind|ind|2|0
INFO 2009-12-19 18:21:46.519
Execute step dLookForLinkD of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows|ind|ind|ind|2|0
INFO 2009-12-19 18:21:46.531
Execute step dAskForLimkD of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows|ind|ind|ind|2|0
INFO 2009-12-19 18:21:46.543
Execute step dAskForKernelDVD of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows|ind|ind|ind|2|0
INFO 2009-12-19 18:22:00.370
Execute step dAskForSecondKernelDVD of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows|ind|ind|ind|2|0
INFO 2009-12-19 18:22:00.382
Execute step dAskForuserDomain of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows|ind|ind|ind|2|0
INFO 2009-12-19 18:22:01.923
Execute step dBuildAccountInformation of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows|ind|ind|ind|2|0
INFO 2009-12-19 18:22:01.937
Execute step dAskForUserPAsswords of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows|ind|ind|ind|2|0
INFO 2009-12-19 18:22:14.245
Execute step dCollectMSCSNodesInformations of component |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0
INFO 2009-12-19 18:22:14.266
Execute step dGetSAPClusterParameters of component |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0
INFO 2009-12-19 18:22:14.333
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\HA\ABAP\MSCS-A\summary.html.
INFO 2009-12-19 18:22:20.888
Execute step dCheckAndCreateLocalGroups of component |MSCS_A|windows|ind|ind|ind|0|0|CreateLocalGroupsAndAddUsers|windows|ind|ind|ind|4|0
INFO 2009-12-19 18:22:41.193
Execute step dAddUsersToLocalGroups of component |MSCS_A|windows|ind|ind|ind|0|0|CreateLocalGroupsAndAddUsers|windows|ind|ind|ind|4|0
INFO 2009-12-19 18:24:09.102
Execute step dCreateSAPClusterFolder of component |MSCS_A|windows|ind|ind|ind|0|0|PrepareFileSystem|windows|ind|ind|ind|5|0
INFO 2009-12-19 18:24:09.146
Execute step dCopyFiles of component |MSCS_A|windows|ind|ind|ind|0|0|PrepareFileSystem|windows|ind|ind|ind|5|0
INFO 2009-12-19 18:24:09.266
Execute step dDeleteSAPLOC of component |MSCS_A|windows|ind|ind|ind|0|0|PrepareFileSystem|windows|ind|ind|ind|5|0
ERROR 2009-12-19 18:24:09.339
FSL-00001 System call failed. Error 2310 (This shared resource does not exist.
) in execution of system call 'SyWinGetSecurityDescriptor' with parameter (saploc), line (836) in file (synxc_security_desc.cpp).
ERROR 2009-12-19 18:24:09.339
FSL-02002 Unable to determine list of access rights ACL of saploc. This shared resource does not exist.
ERROR 2009-12-19 18:24:09.340
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-12-19 18:24:09.343
FCO-00011 The step dDeleteSAPLOC with step key |MSCS_A|windows|ind|ind|ind|0|0|PrepareFileSystem|windows|ind|ind|ind|5|0|dDeleteSAPLOC was executed with status ERROR ( Last error reported by the step :Caught ESyException in Modulecall: ESAPinstException: error text undefined.).
Thanks in advance.
Regards,
Narendra

Hi Everyone,
While installing ASCS, Run the below mentioned command:
sapinst.exe SAPINST_USE_HOSTNAME=<Virtual Host Name> as it was mentioned in the Installation guide. This command is valid for ASCS Step only.
Call the sapinst.exe with out any command line arguments for rest of the steps.
Hope this will reslove your issue.
Warm Regards,
Narendranath

Windows 2008 Server Configuration - Help

Hello All,
I am not an expert in configuring servers and I have just started to learn. Please forgive me if I am doing something funny!
I have a router with static IP address and DHCP enabled on the router. The router had the following configuration as shown below and the clients were obtaining IP address from the router and using the internet without a problem.
Router Configutaion:
Basic Setting:
IP Address : 122.165.60.160 (My Wan Static IP)
IP Subnet Mask : 255.255.252.0
Gateway IP: 122.165.60.1
DNS Address:
Primary DNS : 203.145.184.32
Secondary DNS: 203.145.184.13
Lan TCP/IP Setup:
IP Address: 192.168.2.1 (Router IP)
IP Subnet Mask: 255.255.255.0
DHCP Enabled:
Statring IP : 192.168.2.11
Ending IP: 192.168.2.100
Now, I have installed Windows 2008 R2 Server with Active Directory, DNS and DHCP, IIS. I have created a few users and did nothing more than that in the server.
Server IP Settings
Server IP: 192.168.2.5
Subnet : 255.255.255.0
Gateway : 192.168.2.1
DNS: 127.0.0.1
And when I tried to join the domain i created... corp.globe.com the clients were not able to find the domain I therefore changed the following settings in the router.
DNS Address:
Primary DNS : 203.145.184.32
Secondary DNS: 192.168.2.5 (Server IP)
After this change the clients were able to join the domain and login as well. However the clients were getting the IP from the router. I am facing a lot of problems as listed below.
1. I am not able to ping the clients using the computer name from the server.
2. Clients cannot ping other clients or server using name. (Suppose if I try... PING SYS1 .... It looks like it is trying to ping some 92.x.x.xx IP address) even if SYS1 IP address is 192.168.2.13
3. Clients can access Internet, but I cannot browse anything in the server.
Please help me in the configuration, or point me to some guide which describes the same. I tried to set up and enable the DHCP server using Windows 2008 machine and I disabled it DHCP on the router, clients where able to get the IP address from Windows 2008
server, but they were not able to use internet. Please advise.
Thanks for your time.

Hi,
And you cannot ping the clients using the computer name from the server?
Did you turn off the firewall on server and client?
If you are having problems connecting to Active Directory and you have already successfully verified network connectivity, there might be a name resolution problem. For more and detail information, please refer to:
http://technet.microsoft.com/en-us/library/cc961921.aspx
Regards.
Vivian Wang

Error: SAP installation of ERP Sr3 with ORACLE 10g on Windows 2008 server

Dear all,
while installaing SAP ERP SR3 with ORACLE 10g on windows 2008 server...
we are getting error as not support.
please confirm wether this version of OS is uspported or not.
thanking you in all,
by
Animesh

actualy we tried to change Oraparam.ini file in the installation folder...
edited ... windows= 5.0, 5.1, 6.0
we had entered 6.0
Yes - that is necessary.
and started ... but after starting we are getting ERROR like unKNOWN and installation popup (OUI popup) exiting with .. error popup.
Yes - because Oracle delivers its own Java version - which is too old to run on Windows 2008.
if you suggest us to use 2003 64 bit for temporaray .... purpose.
and is there any specified procedure to UPgrade OS.
like... DB should be updated before OS upgradation.
You can run 10.2.0.4 on Windows 2003 x64 nicely and upgrade to Windows 2008. Since there is no "upgrade" (it is the highest version supported) there´s no need to do anything.
The question you have to ask is:
Why do you need Windows 2008? Is there any technical implication?
Markus

There was an error connecting to the network, try again!

I bought a new Computer (Mac Mini) with Snow Leopard installed; On joining the network(WEP128Bit) airport extremebasestation and airportexpress with WDS-mode) suddenly the basestation didnt offer WEP 128bit any more. I cant remember precisely but i think ist got something to do with the firmwareupdate of the AEBS or that i gave up WDS and changed to „extend a wireles network“ , well it only offered „WEP transitory“ which did not work properly for some reason;
So i changed to WPA/WPA2 option and extending my network with the airport express.
This worked fine; two computers with leopard, the new one with Snow leopard and a windows Laptop as well as two Mobilephones could easily join the network.
BUT: My old Imac G4 with Tiger (10.4.11) could not join so easy.. (I changed the settings to WPA of course) The symptom was that on the right upper corner of the screen a message appeared saying: „there was an error connecting to the network, try again!“ and when i hit the „try again“ button up to 20 times then sometimes it suddenly succeeded to join.
I was just about to look after the wirelesscard but tried before one thing: I changed my network channel on the AEBS from „automatic“ to Channel 11.
From this time on i worked like a charm. I dont know why only the Imac G4 needed channel 11, but this solved my problem.
Message was edited by: Alfi
Message was edited by: Alfi
Message was edited by: Alfi
Message was edited by: Alfi
Message was edited by: Alfi
Message was edited by: Alfi

Here is the list of DHCP Clients:
http://home.earthlink.net/~jeffny0...ExtClients.jpg
(MAC addresses scambled for security)
I am not sure what 192.168.1.193 is ??? The 16 port Asante switch??
Anyone know if there is a way to (easily) add "Client ID" names in XP? I went though my Macs and added names to help ID them in the router, but can't see where to add names in XP?
IP Address: 64.110.135.46
Subnet Mask: 255.255.255.128
Router Address: 65.110.135.1
(posting that does not compromise my security??)
I think I need to figure out how to get the HP 4050 to renew its IP address? Then the router should assign an address to it.....I would like it to use the same address it has now so I don't have to recofigure addresses on the computers to print to it......hummm
DHCP Begining Address: 191.168.1.2
DHCP Ending Address: 191.168.1.200
DHCP Lease: 4 (hours)
COUPLE HOURS LATER......
Just tried turning off the HP 4050 and unplugging it from the wall. Then plugging it (power) back in and turning it on, trying to get it to renew its IP address with the AirPort Extreme router.....nothing. Still does not show up in my list of DHCP Clients.
Tried Restarting the router.....now I see no clients at all in my list of DHCP Client list..... grrrrrr
Can anyone tell me why AirPort Extreme is not seeing the HP 4050 as a DHCP client?
Jeff-

Error while installing the SAP J2EE add-on for SAP NW XI installation

Error while installing the SAP J2EE add-on for SAP NW XI installation
Posted: Jan 24, 2007 5:23 PM Reply E-mail this post
Hello,
When I am installing the SAP SAP J2EE add-on for SAP NW XI installation I am getting the follwing error:
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: Executable /oracle/XID/920_64/bin/sqlplus returns 127.. SOLUTION: See ora_sql_results.log and the Oracle documentation for details
Could some one help me to resolve this error and install the SAP J2EE add-on?
Thanks,
George

Hi George,
Kindly use the latest installation Masted in Service market place. That will possibly solve your problem.
Regards
Vivek

Error When Opening the Setup/Transactions/ Sources Window

Hi All,
in Oracle E-Business Suite R12 Version
Error When Opening the Setup/Transactions/ Sources Window
APP-FND-01388: Cannot read value for profile option FND_DEVELOPER_MODE in routine &ROUTINE.
ORA-01403: no data found
FRM-40735: WHEN-CREATE-RECORD trigger raised unhandled exception ORA-06502.

Amr,
Please see the suggested solutions in these docs.
App-Fnd-01388: Cannot Read Value For Profile Option Fnd_developer_mode In Routine [ID 563884.1]
R12: How To Avoid The Error Message APP-FND-01388 On Drilldown [ID 556668.1]
R12 APXINWKB Error APP-FND-01388 When Trying To Query Invoice [ID 864195.1]
APP-FND-01388 Cannot Read Profile Option FND_DEVELOPER_MODE In Benefits Service Center Form [ID 422182.1]
Thanks,
Hussein

FTP adapter failing sometimes, msg:Error connecting to the OAI Repository

Hi,
I have imported a dump due to curropt metadata definition. The import was successful without any warning/error.
I have recreated the event , but when I am testing the same, getting following error in the FTP adapter, though the adadpter is started successfully, connecting to hub /repository, still trowing below errror when it translates a file:
Sometimes it works when the adadpter is killed & restarted.
Ususally happening when a new event is created & run for the first time...
++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++
<A N = "do_no">428997</A>
<A N = "mdo_no">
</A>
</AO>
</AO>
</AO>
</B>
</MSG>.
Mon Oct 03 17:18:45 SGT 2005: Transport logs:
Message linked list has 0 elements.
Mon Oct 03 17:18:45 SGT 2005: Transport logs:
FileReceiver.sendResponse() completed.
Mon Oct 03 17:18:45 SGT 2005: Transport logs:
FileReceiver.receive() is invoked.
Mon Oct 03 17:18:45 SGT 2005: Transport logs:
The message queue is empty.
Mon Oct 03 17:18:45 SGT 2005: Initializing connection to the Repository...
Mon Oct 03 17:18:46 SGT 2005: Connected to the Repository.
Mon Oct 03 17:18:46 SGT 2005: Error connecting to the OAI Repository. Please make sure that the hub database and the OAI Repository are started properly. Once everything is started properly, the connection will be automatically re-established. However, if you have provided incorrect parameters concerning your hub database or the OAI Repository during installation of this Adapter, please stop the Adapter, fix the information and restart.
oracle.aob.repository.aobRepositoryCartridge.RepositoryException
++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++
Any pointers on this will be a great help for me.
Regards,
MOhit

In same context, what I observed is that the FTP adapter throws above error if a file is send again for translation...ie; when i try to use the same file for testing putingit in FTO dir , FTP adapter hangs throwing above error.
Even after few runs of other files.
Is it something related to the security feature of the product which prohibits sending the contents of message if the same contents are send previously?
Actullay I had never faced such issue before & use to do the testing with same file itself.
oai_agent_error has following entry in internalid column:
MetadataManager_RepositoryConnectionErrorWithoutOID
When I kill the adapter, the same msg is picked up by the subcribing adadpeter(dbadapter) & puts the data into the table.
Tough I m fixing the above issue as below:
1- kill the FTP adapter
2- remove its entries in componentinfo table.
3-deleting all rows in oai_hub_queue.
4- stop other adapters.
5- Stopping & restarting the repository again.
Still not sure whether error throwing by adapter is expected functionality in iStudio, or something is missing in the setting done in my setup?
Regards.
Mohit

How do I get iTunes to connect to the itunes store in Windows 8.1?

How do I get iTunes to connect to the iTunes Store in Windows 8.1?

Hello, russ222.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting articles that I would recommend going through when experiencing issues connecting to the iTunes Store.
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/ts4123
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes: Advanced iTunes Store troubleshooting
https://support.apple.com/kb/TS3297
Cheers,
Jason H.

"Connection failed ... There was an error connecting to the server"

Hi,
I have a late-2009 imac, running Snow Leopard and all the latest updates.
However, since ugrading to ilife '09, I now see the following error
"Connection failed
There was an error connecting to the server
"BeechMac". Check the servername or IP address and then try again"
However, "Beechmac" was the name of the older G4 Mac from which I upgraded (using Time Machine) to the imac last year - and it no longer exists on the network.
As a test, I copied over to this Mac Mini (also latest OS and updates) all the iphoto directory prior to update and then updated to ilife '11 - same problem is seen.
I assume some files have some form of symbolic links to a networked partition ?
The only difference to my network/system has been updating to ilife '11 - and all I use is iphoto.
However, the error pops up every hour or so - and the mouse disappears and its tricky to gain mouse focus again to remove the message.
I've scoured the Internet - but no help.
- Paul

I think I've identified the problem (or at least a solution).
There were broken Alias links for some of the photos in my iphoto directory.
I navigated Finder to the root of my iphoto collection and searched for "Kind: Alias"
I then checked (using Right-Click:"Get info") that the Alias was working (if not a broken Jpeg icon was shown), and if not fixed up.
It appears that in my system moves from taking photos from PC onto my original G5 Mac and then into iphoto (which had two partitions) some of the files had been aliased rather than copied. (Not sure exactly how this happened).
Anyway, I was able to repair the broken file by going into the Terminal and copying the required JPEG onto the Alias.
I wish there was an easier way to find broken Aliases - it was fairly tedious.
- Paul

There was an error connecting to the update server.

There was an error connecting to the update server. Check your network settings and try again.
am i along with this?
airport utility 5.4.2 can`t get a new update 7.4.2

Ok. Got it fixed.
For a real fix:
Try trashing the ~/Library/Application Support/Apple/AirPort folder. This should solve the problem this time and next time.
If you are reluctant to do that, log into your 'test' account. (You do have a test account, don't you?)
Do the update from there.
Apparently we have something corrupted in our support directories for the AirPort device.
I first fixed my problem by doing the alternate log in method and found that all 3 of my devices were needing a firmware update but only the Capsule was reporting an update within my own account.

How do I get rid of the error message "There was an error connecting to the server “Office AirPort Extreme” ?

How do I get rid of the error message "There was an error connecting to the server “Office AirPort Extreme” ? This message shows up 3 times when I boot my iMac.

I do have a USB hard drive hooked up to the Airport. I've never created an AppleScript for it. Should I disconnect the USB drive and see if I still get the error message?
Thanks for your reply!

We installed the Acrobat Reader 11.0.09 on Citrix enable Windows 2008 server a month ago , it was working. starting from this weeke we are receiveing error mesaage AcroRD32.exe - application error (Instruction at 0x...bad8 bad referenced memory at

We installed the Acrobat Reader 11.0.09 on Citrix enable Windows 2008 server a month ago , it was working. starting from this weeke we are receiveing error mesaage AcroRD32.exe - application error (Instruction at 0x...bad8 bad referenced memory at 0x....bad8 The memory could not be written Click ok to terminate the program)
Instruction at 0x...bad8 bad referenced memory at 0x....bad8
The memory could not be written
Click ok to terminate the program

Hi SUBRAMANIAN,
Are you still facing this issue? It seems to be conflict to me.
Are you using any third party plugins with Acrobat? Try disabling and to use it again.
Regards,
Ajlan Huda.

Trying to sync my macs but getting this... error connecting to the server

trying to sync my macs but get this .....error connecting to the server,check server name or ip address ?????

Same problem . . . any resolutions out there?

Hi, I have keep seeing a small 'Connection failed' warning box popping up: [[Connection failed There was an error connecting to the server "Warning; Self Aware"]]. Question for you gods - what does it mean. is it important? my computer connects to my

hi, I have keep seeing a small 'Connection failed' warning box popping up: [[Connection failed There was an error connecting to the server "Warning; Self Aware"]]. Question for you gods - what does it mean. is it important? my computer connects to my server works. Could it be related to "Network Preference & Monitor icons missing from my system preferences page? and my guest sign=in account is now the main account?? thanks you. jb

hi, I have keep seeing a small 'Connection failed' warning box popping up: [[Connection failed There was an error connecting to the server "Warning; Self Aware"]]. Question for you gods - what does it mean. is it important? my computer connects to my server works. Could it be related to "Network Preference & Monitor icons missing from my system preferences page? and my guest sign=in account is now the main account?? thanks you. jb

Error connecting to the SAP SRV on Windows 2008 Server platform

Similar Messages

Maybe you are looking for